Search

We present an advanced quantum super-resolution imaging technique based on photon statistics measurement and its accurate modeling. Our reconstruction algorithm adapts to any kind of non-Poissonian emitters, outperforming the corresponding classical SOFI method. It offers sub-diffraction resolution improvement that scales with the $\sqrt{j}$, where $j$ is the highest order central moments of the photocounts. More remarkably, in combination with structured illumination a linear improvement with j can be reached. Through simulations and experiments, we prove our method's clear superiority over traditional SOFI, especially in low excitation light conditions, providing a promising avenue for non-invasive super-resolution microscopy of delicate samples.

Single-crystal diamond substrates presenting a high concentration of negatively charged nitrogen-vacancy centers (NV-) are on high demand for the development of optically pumped solid-state sensors such as magnetometers, thermometers or electrometers. While nitrogen impurities can be easily incorporated during crystal growth, the creation of vacancies requires further treatment. Electron irradiation and annealing is often chosen in this context, offering advantages with respect to irradiation by heavier particles that negatively affect the crystal lattice structure and consequently the NV- optical and spin properties. A thorough investigation of electron irradiation possibilities is needed to optimize the process and improve the sensitivity of NV-based sensors. In this work we examine the effect of electron irradiation in a previously unexplored regime: extremely high energy electrons, at 155 MeV. We develop a simulation model to estimate the concentration of created vacancies and experimentally demonstrate an increase of NV- concentration by more than 3 orders of magnitude following irradiation of a nitrogen-rich HPHT diamond over a very large sample volume, which translates into an important gain in sensitivity. Moreover, we discuss the impact of electron irradiation in this peculiar regime on other figures of merits relevant for NV sensing, i.e. charge state conversion efficiency and spin relaxation time. Finally, the effect of extremely high energy irradiation is compared with the more conventional low energy irradiation process, employing 200 keV electrons from a transmission electron microscope, for different substrates and irradiation fluences, evidencing sixty-fold higher yield of vacancy creation per electron at 155 MeV.

The challenge of pattern recognition is to invoke a strategy that can accurately extract features of a dataset and classify its samples. In realistic scenarios this dataset may be a physical system from which we want to retrieve information, such as in the readout of optical classical memories. The theoretical and experimental development of quantum reading has demonstrated that the readout of optical memories can be dramatically enhanced through the use of quantum resources (namely entangled input-states) over that of the best classical strategies. However, the practicality of this quantum advantage hinges upon the scalability of quantum reading, and up to now its experimental demonstration has been limited to individual cells. In this work, we demonstrate for the first time quantum advantage in the multi-cell problem of pattern recognition. Through experimental realizations of digits from the MNIST handwritten digit dataset, and the application of advanced classical post-processing, we report the use of entangled probe states and photon-counting to achieve quantum advantage in classification error over that achieved with classical resources, confirming that the advantage gained through quantum sensors can be sustained throughout pattern recognition and complex post-processing. This motivates future developments of quantum-enhanced pattern recognition of bosonic-loss within complex domains.

Solid state spins in diamond, in particular negatively charged nitrogen-vacancy centers (NV), are leading contenders in the field of quantum sensing. While addressing of single NVs offers nanoscale spatial resolution, many implementations benefit from using large ensembles to increase signal magnitude and therefore sensitivity. However, sensing with ensembles brings its own challenges given the random orientation of the spin quantization axis within the diamond crystal lattice. Here, we present an open source simulation tool that models the influence of arbitrary electric and magnetic fields on the electronic and nuclear spin states of NV ensembles, and can be extended to other color centers. Specifically, the code computes the transition strengths and predicts the sensitivity under shot-noise-limited optically-detected magnetic resonance. We illustrate the use of the code in the context of electric field sensing, a promising emerging functionality of NV centers with applications in biosensing and electronics, and bring several subtle features to light that are due to the interplay between different NV orientations and the external electric and microwave fields. Moreover, we show that our code can be used to optimize sensitivity in situations where usual arguments based on neglecting terms in the full Hamiltonian would give sub-optimal results. Finally, we propose a novel sensing scheme which allows to perform full vector electrometry without the need for precise bias magnetic field alignment, thus reducing the experimental complexity and speeding up the measurement procedure., Comment: 23 pages, 6 figures

Monitoring neuronal activity with simultaneously high spatial and temporal resolution in living cell cultures is crucial to advance understanding of the development and functioning of our brain, and to gain further insights in the origin of brain disorders. While it has been demonstrated that the quantum sensing capabilities of nitrogen-vacancy (NV) centers in diamond allow real time detection of action potentials from large neurons in marine invertebrates, quantum monitoring of mammalian neurons (presenting much smaller dimensions and thus producing much lower signal and requiring higher spatial resolution) has hitherto remained elusive. In this context, diamond nanostructuring can offer the opportunity to boost the diamond platform sensitivity to the required level. However, a comprehensive analysis of the impact of a nanostructured diamond surface on the neuronal viability and growth was lacking. Here, we pattern a single crystal diamond surface with large-scale nanopillar arrays and we successfully demonstrate growth of a network of living and functional primary mouse hippocampal neurons on it. Our study on geometrical parameters reveals preferential growth along the nanopillar grid axes with excellent physical contact between cell membrane and nanopillar apex. Our results suggest that neuron growth can be tailored on diamond nanopillars to realize a nanophotonic quantum sensing platform for wide-field and label-free neuronal activity recording with sub-cellular resolution., Comment: 26 pages. 10 figures

Localized electronic spins in solid-state environments form versatile and robust platforms for quantum sensing, metrology and quantum information processing. With optically detected magnetic resonance (ODMR), it is possible to prepare and readout highly coherent spin systems, up to room temperature, with orders of magnitude enhanced sensitivities and spatial resolutions compared to induction-based techniques, allowing for single spin manipulations. While ODMR was first observed in organic molecules, many other systems have since then been identified. Among them is the nitrogen-vacancy (NV) center in diamond, which is used both as a nanoscale quantum sensor for external fields and as a spin qubit. Other systems permitting ODMR are rare earth ions used as quantum memories and many other color centers trapped in bulk or 2-dimensional host materials. In order to allow the broadest possible community of researchers and engineers to investigate and develop novel ODMR-based materials and applications, we review here the setting up of ODMR experiments using commercially available hardware. We also present in detail the dedicated collaborative open-source interface named Qudi and describe the features we added to speed-up data acquisition, relax instrument requirements and extend its applicability to ensemble measurements. Covering both hardware and software development, this article aims to steepen the learning curve of newcomers in ODMR from a variety of scientific backgrounds, optimize the experimental development time, preempt the common measurement pitfalls, and provide an efficient, portable and collaborative interface to implement innovative experiments., Comment: 24 Pages, 14 figures, 3 tables, 149 references

The protocol of quantum reading refers to the quantum enhanced retrieval of information from an optical memory, whose generic cell stores a bit of information in two possible lossy channels. In the following we analyze the case of a particular class of optical receiver, based on photon counting measurement, since they can be particularly simple in view of real applications. We show that a quantum advantage is achievable when a transmitter based on two-mode squeezed vacuum (TMSV) states is combined with a photon counting receiver, and we experimentally confirm it. In this paper, after introducing some theoretical background, we focus on the experimental realisation, describing the data collection and the data analysis in detail.

We introduce a protocol addressing the conformance test problem, which consists in determining whether a process under test conforms to a reference one. We consider a process to be characterized by the set of end-product it produces, which is generated according to a given probability distribution. We formulate the problem in the context of hypothesis testing and consider the specific case in which the objects can be modeled as pure loss channels. We demonstrate theoretically that a simple quantum strategy, using readily available resources and measurement schemes in the form of two-mode squeezed vacuum and photon-counting, can outperform any classical strategy. We experimentally implement this protocol, exploiting optical twin beams, validating our theoretical results, and demonstrating that, in this task, there is a quantum advantage in a realistic setting.

The final goal of quantum hypothesis testing is to achieve quantum advantage over all possible classical strategies. In the protocol of quantum reading this advantage is achieved for information retrieval from an optical memory, whose generic cell stores a bit of information in two possible lossy channels. For this protocol, we show, theoretically and experimentally, that quantum advantage is obtained by practical photon-counting measurements combined with a simple maximum-likelihood decision. In particular, we show that this receiver combined with an entangled two-mode squeezed vacuum source is able to outperform any strategy based on statistical mixtures of coherent states for the same mean number of input photons. Our experimental findings demonstrate that quantum entanglement and simple optics are able to enhance the readout of digital data, paving the way to real applications of quantum reading and with potential applications for any other model that is based on the binary discrimination of bosonic loss., Comment: 6 pages. 4 figures

Quantum correlations become formidable tools for beating classical capacities of measurement. Preserving these advantages in practical systems, where experimental imperfections are unavoidable, is a challenge of the utmost importance. Here we propose and realize a quantum ghost imaging protocol able to compensate for the detrimental effect of detection noise and losses. This represents an important improvement as quantum correlations allow low brightness imaging, desirable for reducing the absorption dose. In particular, we develop a comprehensive model starting from a ghost imaging scheme elaborated for bright thermal light, known as differential ghost imaging and particularly suitable in the relevant case of faint or sparse objects. We perform the experiment using SPDC light in microscopic configuration. The image is reconstructed exploiting non-classical intensity correlation rather than photon pairs detection coincidences. On one side we validate the theoretical model and on the other we show the applicability of this technique by reconstructing a biological object with 5 micrometers resolution.

Loss measurements are at the base of spectroscopy and imaging, thus perme- ating all the branches of science, from chemistry and biology to physics and material science. However, quantum mechanics laws set the ultimate limit to the sensitivity, constrained by the probe mean energy. This can be the main source of uncertainty, for example when dealing with delicate system such as biological samples or photosensitive chemicals. It turns out that ordinary (clas- sical) probe beams, namely with Poissonian photon number distribution, are fundamentally inadequate to measure small losses with the highest sensitivity. Conversely, we demonstrate that a quantum-correlated pair of beams, known as twin-beam state, allows reaching the ultimate sensitivity for all energy regimes (even less than one photon per mode) with the simplest measurement strategy. One beam of the pair addresses the sample, while the second one is used as a reference to compensate both for classical drifts and for uctuation at the most fundamental quantum level. This scheme is also absolute and accurate, since it self-compensates for unavoidable instability of the sources and detectors, which could otherwise lead to strongly biased results. Moreover, we report the best sensitivity per photon ever achieved in loss estimation experiments.

In this review we present the potentialities and the achievements of the use of non-classical photon number correlations in twin beams (TWB) states for many applications, ranging from imaging to metrology. Photon number correlations in the quantum regime are easy to be produced and are rather robust against unavoidable experimental losses, and noise in some cases, if compared to the entanglement, where loosing one photon can completely compromise the state and its exploitable advantage. Here, we will focus on quantum enhanced protocols in which only phase-insensitive intensity measurements (photon number counting) are performed, which allow probing transmission/absorption properties of a system, leading for example to innovative target detection schemes in a strong background. In this framework, one of the advantages is that the sources experimentally available emit a wide number of pairwise correlated modes, which can be intercepted and exploited separately, for example by many pixels of a camera, providing a parallelism, essential in several applications, like wide field sub-shot-noise imaging and quantum enhanced ghost imaging. Finally, non-classical correlation enables new possibilities in quantum radiometry, e.g. the possibility of absolute calibration of a spatial resolving detector from the on-off- single photon regime to the linear regime, in the same setup.