Search

In this paper, based on our previous expertise on ceramic artifacts, several archaeometric methods applied to some samples collected from the Dudești archaeological site (Oltenia region, Romania) are reported for the first time in the literature. The chemical composition, and microstructural and morphological characterization of these samples offer important conclusions about the processing conditions. Some specific techniques such as X-ray diffraction (XRD), wavelength-dispersive X-ray fluorescence (WDXRF), optical microscopy (OM), stereomicroscopy, environmental scanning electron microscopy (ESEM), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy provide compositional information about composition and the decay processes. Additionally, the Brunauer–Emmett–Teller (BET) method helps to estimate pore sizes and specific surface areas. A thermogravimetric analysis (TGA/TDG) was used to establish details regarding the production technology and also the raw materials source used to make the ceramics. The obtained results indicated that the ceramics are based on a paste of muscovite and feldspar, with high plasticity, together with quartz and hematite/goethite and calcite, the latter in very low concentrations. According to the obtained results, we could assume that clays from the investigated samples had a low concentration of calcium. Gypsum is present as paste in a very low concentration, identified by the presence of a sulphate group in WDXRF. In the same context, iron oxides have a significant impact on the firing atmosphere of iron-rich clay, resulting in blackening under reducing conditions and a reddish coloration under oxidative conditions. The use of hematite and gypsum as pigments further contributes to the color variations in the pottery. The consistent firing temperature range of 200–600 °C in Dudești pottery implies a standardized production process, the variation in color being dependent on the specific reducing/oxidative regime conditions (reducing atmosphere followed by rapid oxidation). This relationship between clay composition and local sources suggests a connection to Neolithic pottery production in the region and their color depending on the reducing/oxidative regime conditions.

Paper aging and protection processes play an essential function in the preservation of library collections and archives. In this study, some physical-mechanical properties of paper samples from XXth century books (private collections), such as pH acidity, tensile strength, and modulus of elasticity, as well as optical properties, such as absolute change in yellowness, were examined before and after treating them with hydroxyapatite nanoparticles (HAp). Accelerated light aging was also evaluated and discussed. The treatment with HAp nanoparticles increased the paper’s pH to slightly alkaline values (approximately pH 8). Washing and treating the paper improved its mechanical properties compared to untreated paper; the tear length increased by 35% and the modulus of elasticity increased by 56%. That the treated and aged samples are more elastic than the original samples demonstrates that HAp nanoparticles consolidated the cellulose fibers. Additionally, particle morphology, size, composition and size distribution were assessed via image analysis using scanning electron microscopy (SEM-EDX), atomic force microscopy (AFM), and the ImageJ processing program.

Currently, approximately 70% of paintings in museum collections are affected by the presence of metallic soaps, evidenced by spherical globules visible on the surface of the paintings. They are responsible for altering the paintings’ surface through processes such as exfoliation and cracking, or even in the form of surface “skins” that appear in the pictorial layers. The objective of this study is the investigation of the icon paintings from Saint Mary Monastery, Techirghiol, Romania, which underwent some restoration procedures. This study is so important/significant, due to the presence of efflorescence that is correlated with the conversion of some fatty acids, as palmitic acid, stearic acid and azelaic acid, in the so-called metallic soaps through the reaction of the metals contained in the pigments from the painting layer and the binder. The investigated paintings are strongly affected by zinc carboxylate aggregation, and for this, the sample was embedded in polyester resin and the obtained cross-section, after polishing, was investigated by microscopic techniques (optical microscopy (OM), stereomicroscopy, and scanning electron microscopy with electronic dispersion spectroscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and gas-chromatography with mass spectrometry (GC-MS) in good agreement with data from the literature. The potential result of this study is the identification and quantification of the metallic soap generated as a white deposit (probably salts, a kind of white efflorescence), from the binding medium of the metal carboxylate ionomer, by the crystallization of saturated fatty acids, through polymerization in oil. Six pigments (calcite, lithopone, carbon black, red ochre, vermilion, and ultramarine), present in the sublayers of the samples were identified.

The aim of this paper is to analyze the construction materials (mortars) of an architectural monument (Deserted Tower (Lilly Tower) from Corvins’ Castle, Romania). The mortars were characterized following a multidisciplinary approach, combining macroscopic observation with petrographic microscopy, mineralogical analysis (X-ray diffraction) and elemental analysis (X-ray fluorescence), hydric properties, and color of representative samples of the monument. The results revealed the use of gypsum mortars (produced by lumps with higher Fe content), with minor concentrations of crystalline dolomites of the Southern Carpathians, calcite, and quartz. The materials’ effective porosity and their water absorption capacity were high. A possible solution to consolidate the damaged area with some consolidation products (hydroxyapatite carbonate and its derivatives with Ag and Sr) was investigated, too. The interactions between the mortar’s specimens and the effectiveness of the consolidation treatments were evaluated by physico-chemical analyses (molecular structure by X-ray powder diffraction (XRPD), wavelength dispersive X-ray fluorescence (WDXRF), dynamic light scattering (DLS)), morphological characterization by microscopic techniques as SEM-EDS, TEM, and physical and mechanical investigations (peeling test and compressive strength). Results were drawn based on historical, in situ observations, and analytical data, and put into evidence the composition, high weathering degree, and the possibility to surface consolidate with Sr-CHAp.

Innovative composites based on polypropylene waste impurified cu HDPE (PPW) combined with two thermoplastic block-copolymers, namely styrene-butadiene-styrene (SBSBC) and styrene-isoprene-styrene (SISBC) block-copolymers, and up to 10 wt% nano-clay, were obtained by melt blending. SBSBC and SISBC with almost the same content of polystyrene (30 wt%) were synthesized by anionic sequential polymerization and used as compatibilizers for PPW. Optical microscopy evaluation of the PPW composites showed that the n-clay was encapsulated into the elastomer. Addition of n-clay, together with SBSBC or SISBC, increased the interphase surface of the components in the PPW composites and enhanced the superficial area/volume ratio, which led to a recycled material with improved performance. The data resulting from differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), mechanical evaluation, and dynamic mechanical analysis (DMA) revealed that PPW reinforcement with n-clay and styrene-diene block-copolymers allows the obtaining of composites with favorable mechanical and thermal properties, and excellent impact strength for potential engineering applications.

In this work, new treatments based on multi-walled carbon nanotubes (MWCNTs), MWCNTs decorated with zinc oxide (ZnO), MWCNTs decorated with hydroxyapatite (HAp) and MWCNTs decorated with silver (Ag) nanoparticles dispersed in PHBHV solution are proposed for improving sound oak wood properties. We hypothesize that the solutions containing decorated MWCNTs will be more efficient as wood consolidants, not only because of the improved mechanical properties of the treated wood but also because of the hydrophobic layer created on the wood surface. In order to test these hypotheses, the treatments’ potential was investigated by a number of complex methods, such as colorimetric parameter measurements, water absorption tests, mechanical tests, artificial aging and antifungal tests. The data confirm that the treated wood materials have moderate stability, and the color differences are not perceived with the naked eye. A significant improvement of the treated samples was observed by water absorption, humidity and mechanical tests compared to untreated wood. The best results were obtained for samples treated by brushing with solutions based on decorated CNTs, which confirms that a uniform and thicker layer is needed on the surface to ensure better protection. The wood behavior with accelerated aging revealed that the control sample degraded faster compared to the other treated samples. Antifungal tests showed that higher growth inhibition was obtained for samples treated with 0.2% MWCNTs_ZnO + PHBHV. Considering all of the obtained results, it can be concluded that the most effective treatment was MWCNTs_ZnO + PHBHV at a nanocomposite concentration of 0.2%, applied by brushing. Thus, wood protection against mold and fungi will be achieved, simultaneously ensuring improved mechanical strength and water barrier properties and therefore maintaining the structural integrity of sound oak wood over time.

Worldwide, one of the most significant threats to human health problems remains antibiotic resistance [...]

The aim of this study was to address one of the major challenges of the conservation state of wooden artifacts or artworks namely, the preservation and restoration of wood surfaces. The factors involved in the deterioration of wood are mainly the external factors such as fire, low temperature and microbiological agents, which induce some degradation processes in wood, identified by discoloration, fragility and unsightly appearance. In this study, biodegradable materials based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) and composites based on PHBHV and particles (zinc oxide (ZnO), carbonated hydroxyapatite (CHAp) and its metallic derivatives with silver (AgCHAp) and strontium (SrCHAp) were applied on firwood specimens in order to investigate their consolidation capacity. Colorimetric measurements have confirmed that the chosen treatments did not change the colour of the natural wood. The hardness test revealed that the consolidation system increases the mechanical properties of the samples. The used treatments confer a strong hydrophobic character which prevents exfoliation of the wood samples, as confirmed by the performed water absorption test.

This research focuses on the synthesis of multi-walled carbon nanotubes (MWCNTs) decorated with TiO2 nanoparticles (NPs) and incorporated in cellulose acetate-collagen film in order to obtain a new biomaterial with potential biomedical applications and improved antimicrobial activity. The successful decoration of the MWCNTs with TiO2 NPs was confirmed by several structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction and transmission electron microscopy. The obtained nanocomposites were further incorporated into cellulose acetate-collagen films, at different concentrations and absorption kinetics, antimicrobial activity and in vitro biocompatibility of the obtained films was investigated. The antimicrobial tests sustained that the presence of the nanocomposites into the polymeric matrix is an important aspect in increasing and maintaining the antimicrobial activity of the polymeric wound dressings over time. The biocompatibility and cytotoxicity of the obtained films was evaluated using cellular viability/proliferation assay and fluorescent microscopy which revealed the ability of the obtained materials as potential wound dressing biomaterial.

Abstract Over centuries, the external factors such as fire, low temperature, light or microbiological agents, act on the wood and induce some degradation processes, sometimes irreversible, identified by discoloration, fragility and unsightly appearance. Although there are numerous literature reports about different nanomaterials used for preservation and restoration of wood surfaces (calcium hydroxides, magnesium hydroxides, hydroxyapatite, or even organic resins as Paraloid B72), in this paper it is proposed a new system—gold hydroxyapatite (AuHAp), tested on the hazelnut wood samples (young and aged specimens), as a new solution for preservation of some wooden artifacts. This paper addresses a broad range of analytical methods: X-ray diffraction, UV–Vis spectrophotometry, Fourier transformed infrared spectroscopy, Raman spectroscopy, scanning electron microscopy with energy dispersive spectroscopy, chromatic parameters and hardness test. Also, humidity sorption/desorption measurements are used for humidity sorption and desorption evaluation. The adsorption and desorption tests determined the hydroscopic sorption properties of the wood specimens by measuring the mass of the specimens in equilibrium with air at a specific temperature and RH. All the results concluded that after the application of the new system on the hazelnut wood surface, a well distributed and uniform layer consisting from AuHAp systems with a network aspect are observed, which covers the wood vessels and fibers, filling the voids and stopping the wood weathering process, more accentuated at aged wood than at the young species.

In this study, multi-walled carbon nanotubes (MWCNTs) were decorated with different types of nanoparticles (NPs) in order to obtain hybrid materials with improved antimicrobial activity. Structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, environmental scanning electron microscopy/energy-dispersive X-ray spectroscopy and the Brunauer–Emmett–Teller technique were used in order to investigate the decoration of the nanotubes with NPs. Analysis of the decorated nanotubes showed a narrow size distribution of NPs, 7–13 nm for the nanotubes decorated with zinc oxide (ZnO) NPs, 15–33 nm for the nanotubes decorated with silver (Ag) NPs and 20–35 nm for the nanotubes decorated with hydroxyapatite (HAp) NPs, respectively. The dispersion in water of the obtained nanomaterials was improved for all the decorated MWCNTs, as revealed by the relative absorbance variation in time of the water-dispersed nanomaterials. The obtained nanomaterials showed a good antimicrobial activity; however, the presence of the NPs on the surface of MWCNTs improved the nanocomposites’ activity. The presence of ZnO and Ag nanoparticles enhanced the antimicrobial properties of the material, in clinically relevant microbial strains. Our data proves that such composite nanomaterials are efficient antimicrobial agents, suitable for the therapy of severe infection and biofilms.

Chronic neuropathic pain, particularly peripheral pain, is a cause of great concern for diabetic patients. Current treatments include numerous agents such as capsaicinoids, a known deterrent of neuropathic pain despite the inconvenience associated with local side effects. In this context, the current work aims to elucidate the potential mechanisms involved in cytotoxicity by capsaicin and proposes an efficient formulation of capsaicin in alginate microcapsules, which significantly reduces side effects from capsaicin topical administration. For this, human dermal fibroblast cells were treated with alginate-microencapsulated capsaicin extracts and screened for potential cytotoxic effects produced by the treatment. Cell viability and morphology were examined, as well as oxidative stress status and anti-inflammatory potential. Our results show that the alginate encapsulated formulation of capsaicin exerted lower cytotoxic effects on human dermal fibroblasts as measured by cell viability and reactive oxygen species (ROS) production. Furthermore, the expression profiles of inflammatory cytokines were significantly altered by the treatment as compared with the control culture.

Carbonated hydroxyapatite (CHAp) is an inorganic compound with various applications that presents better homogeneity and consolidating effect than HAp [1]. [...]

In the last decades, the waste electric and electronic equipment (WEEE) has increased substantially due to an accelerated development of the economy and the lifetime of electronics.

Nowadays, more than ever, cultural heritage is linking humanity to its history. In order to [...]

Carbon nanotubes (CNTs) have attracted attention, due to their structures as well as their ability to present multiple walls. [...]

The color characteristics, vibration spectra, phase and mineral composition, internal structural organization of several fragments of the ancient Roman mosaics from the Roman Mosaic Museum, Constanta, Romania were studied by non-destructive (Chromatic analysis, Neutron Diffraction, Neutron Tomography) and micro-invasive techniques (Optical Microscopy, X-ray Diffraction, Field Emission Scanning Electron Microscopy–Energy Dispersive X-ray Spectroscopy, Raman Spectroscopy, Wavelength Dispersion X-ray Fluorescence). These investigations were performed in order to characterize the original Roman mosaic fragments. The major and minor phase components of the studied mosaic fragments were determined, the crystal structure of the main phases was analyzed, and their three-dimension spatial arrangement was reconstructed. The similar composition of the major phases of all mosaic fragments can indicate a generic recipe for making mosaic elements, but minor phases were presumably added for coloring of mosaic pieces. Some degradation areas inside the volume of the mosaic fragments were found by means of neutron diffraction and neutron tomography methods. These degradation areas are probably related to the formation of iron hydroxides during chemical interactions of mosaic fragments with the sea and urban polluted atmosphere.

In the last few years, the preservation of cultural heritage has become an important issue globally, due to the fact that artifacts and monuments are continually threatened by degradation. It is thus very important to find adequate consolidators that are capable of saving and maintaining the natural aspect of these objects. This study aims to provide an updated survey of the main nanomaterials used for the conservation and restoration of cultural heritage. In the last few years, besides the classic nanomaterials used in this field, such as metal nanoparticles (copper and silver) and metal oxides (zinc and aluminum), hydroxyapatite and carbonated derivatives, tubular nanomaterials (such as carbon nanotubes) have been used as a potential consolidate material of cultural heritage. Tubular nanomaterials have attracted attention for use in different fields due to their structures, as well as their ability to present multiple walls. These nanotubes have the necessary properties in preserving cultural heritage, such as superior mechanical and elastic strength (even higher than steel), high hydrophobicity (with a contact angle up to 140°), optical properties (high photodegradation protection), large specific surface area (from 50 to 1315 m2/g, depending on the number of walls) for absorption of other nanomaterials and relatively good biocompatibility.

As the development of the textile industry has progressed, intense concerns have been focusedon the contamination of the environment caused by dye pollutants [...]

Cultural monuments are subject to a degrading phenomenon induced by several factors, such [...]

Recently, numerous studies have been carried out on various. [...]

Graphene and its derivatives have attracted considerable attention in recent years as potentialmaterials for various applications because of their unique physical-chemical properties [...]

The organic part of the waste printed circuit board (WPCB) contains mainly epoxy resin, fiberglass and brominated flame retardants, a composition that makes it quite difficult to reuse [1,2]. [...]

The study aimed to synthesize nanofibers based on styrene-ethylene-butylene-styrene block-copolymers (SEBS) [1] and its composite derivatives, through the electrospinning (Figure 1) process [2]. [...]

Corrosion represents the transformation process of metallic surfaces, caused by the influence of the contact medium. Coins are not exempt from the undesired effect of corrosion. [...]

The high amount of plastics, which are durable, lightweight, and cheap materials, is one of themajor current ecological concerns [...]

The benefits of Capsicum annuum L. are important for human health with its anti-inflammatory [...]

Silver nanoparticles, widely known for their antimicrobial, antioxidant, and antifungal properties, can be obtained using conventional or unconventional methods and have various applications in different scientific fields, including degradation of dyes from the textile industry [1,2]. [...]

Considering that the large quantity of waste electrical and electronic equipment plastics generated annually causes increasing environmental concerns for their recycling and also for preserving of raw material resources, decreasing of energy consumption, or saving the virgin materials used, the present challenge is considered to be the recovery of individual polymers from waste electrical and electronic equipment. This study aims to provide an update of the main identification methods of waste electrical and electronic equipment such as spectroscopic fingerprinting, thermal study, and sample techniques (like identification code and burning test), and the characteristic values in the case of the different analyses of the polymers commonly used in electrical and electronic equipment. Additionally, the quality of the identification is very important, as, depending on this, new materials with suitable properties can be obtained to be used in different industrial applications. The latest research in the field demonstrated that a complete characterization of individual WEEE (Waste Electric and Electronic Equipment) components is important to obtain information on the chemical and physical properties compared to the original polymers and their compounds. The future directions are heading towards reducing the costs by recycling single polymer plastic waste fractions that can replace virgin plastic at a ratio of almost 1:1.