Search

The circumstellar envelopes (CSE) of Cepheids are still not well characterized despite their potential impact on distance determination via both the period-luminosity relation and the parallax-of-pulsation method. This paper aims to investigate Galactic Cepheids across the instability strip in the mid-infrared with MATISSE/VLTI in order to constrain the geometry and physical nature (gas and/or dust) of their CSEs. We secured observations of eight Galactic Cepheids from short up to long period of pulsation, with MATISSE/VLTI in $L$, $M$ and $N$-bands. The SED analysis in the mid-IR confirms the absence of dust spectral signature for all the star sample. For each star in $L$, $M$ and $N$-band we observe closure phases which are consistent with centro-symmetric geometry for the different targets. Finally, the visibilities in $L$, $M$ and $N$ bands are in agreement with the expected star angular diameter, although the observations are compatible with the presence of compact CSEs within the uncertainties. We provide 2$\,\sigma$ upper limits on the CSE flux contribution based on model residuals for several CSE radius, which yield to exclude models simultaneously large and bright ($R_\mathrm{CSE}\approx10\,R_\star$ and $f_\mathrm{CSE}\approx10\%$) for all the stars of the sample. Last, the visibilities in the $N$-band rule out CSE models with significant amount of different type of dust. The MATISSE observations of eight Cepheids with different pulsation period (from 7 up to 38$\,$day) and evolution stage, provide for the first time a comprehensive picture of Cepheids from mid-IR interferometry. We present additional evidences that circumstellar dust emission is negligible or absent around Cepheids for a wide range of stellar parameters in the instability strip. Further interferometric observations in the visible and the near-infrared will be necessary to disentangle the star and the CSE., Comment: 22 pages, 17 figures, accepted in Astronomy and Astrophysics

Since 2019, GRAVITY has provided direct observations of giant planets and brown dwarfs at separations of down to 95 mas from the host star. Some of these observations have provided the first direct confirmation of companions previously detected by indirect techniques (astrometry and radial velocities). We want to improve the observing strategy and data reduction in order to lower the inner working angle of GRAVITY in dual-field on-axis mode. We also want to determine the current limitations of the instrument when observing faint companions with separations in the 30-150 mas range. To improve the inner working angle, we propose a fiber off-pointing strategy during the observations to maximize the ratio of companion-light-to-star-light coupling in the science fiber. We also tested a lower-order model for speckles to decouple the companion light from the star light. We then evaluated the detection limits of GRAVITY using planet injection and retrieval in representative archival data. We compare our results to theoretical expectations. We validate our observing and data-reduction strategy with on-sky observations; first in the context of brown dwarf follow-up on the auxiliary telescopes with HD 984 B, and second with the first confirmation of a substellar candidate around the star Gaia DR3 2728129004119806464. With synthetic companion injection, we demonstrate that the instrument can detect companions down to a contrast of $8\times 10^{-4}$ ($\Delta \mathrm{K}= 7.7$ mag) at a separation of 35 mas, and a contrast of $3\times 10^{-5}$ ($\Delta \mathrm{K}= 11$ mag) at 100 mas from a bright primary (K<6.5), for 30 min exposure time. With its inner working angle and astrometric precision, GRAVITY has a unique reach in direct observation parameter space. This study demonstrates the promising synergies between GRAVITY and Gaia for the confirmation and characterization of substellar companions., Comment: 16 pages, 14 figures. Submitted to A&A

Context: MATISSE, the mid-infrared spectro-imaging instrument of VLTI, was designed to deliver its advertised performance when paired with an external second generation fringe tracker. Science observation started in 2019, demonstrating imaging capabilities and faint science target observations. Now, The GRAVITY fringe tracker stabilizes the MATISSE fringes which allows using all spectroscopic modes and improves sensitivity and data accuracy. Aims: We present how the MATISSE and GRAVITY instruments were adapted to make the GRAVITY fringe tracker work with MATISSE, under the umbrella of the aptly-named GRA4MAT project, led by ESO in collaboration with the two instrument consortia. Methods: We detail the software modifications needed to implement an acquisition and observing sequence specific to GRA4MAT, including simultaneous fringe tracking and chopping and a narrow off-axis capability inspired by the galactic center and exoplanet capability of GRAVITY. We explain the modified data collection and reduction processes. We show how we leveraged the recent fringe tracker upgrade to implement features specific to its use with MATISSE, e.g. fringe jumps mitigation with an improved group delay control and simultaneous fringe tracking and chopping with a new state machine. Results: We successfully demonstrate significant improvements to the MATISSE instrument. Observations can now be performed at higher spectral resolutions of up to $R\sim3300$ and across the full LM bands at once. Long detector integration times, made possible with stabilized fringes, have improved the LM-bands sensitivity by a factor of 10. Low flux biases in coherently-reduced N-band data have been eliminated. The L-band transfer function is now higher and more stable. We finally illustrate the scientific potential of GRA4MAT with a preview of the first exoplanet observation made by MATISSE on $\beta$ Pictoris b., Comment: Revised after language editing

Our purpose is to study the effect of binary companions located within the first 10 stellar radii from the primary AGB star. In this work, we target the mass-losing carbon star V Hydrae (V Hya), looking for signatures of its companion in the dust forming region of the atmosphere. The star was observed in the L- and N-bands with the VLTI/MATISSE instrument at low spectral resolution. We reconstructed images of V Hya's photosphere and surroundings using the two bands and compared our interferometric observables with VLTI/MIDI and VISIR archival data. To constrain the dust properties, we used DUSTY to model the spectral energy distribution. The star is dominated by dust emission in the L- and N- bands. The VISIR image confirms the presence of a large-scale dusty circumstellar envelope surrounding V Hya. The MATISSE reconstructed images show asymmetric and elongated structures in both infrared bands. In the L-band, we detected an elongated shape of approximately 15 mas, likely to be of photospheric origin. In the N-band, we found a 20 mas extension North-East from the star, and perpendicular to the L-band elongated axis. The position angle and the size of the N-band extension match the prediction of the companion position at MATISSE epoch. By comparing MATISSE N-band with MIDI data, we deduce that the elongation axis in the N-band has rotated since the previous interferometric measurements 13 years ago, supporting the idea that the particle enhancement is related to the dusty clump moving along with the companion. The MATISSE images unveil the presence of a dust enhancement at the companion position, opening new doors for further analysis on the binary interaction with an AGB component., Comment: Accepted for publication in Astronomy & Astrophysics

Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to probe this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3). Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back time of 11 billion years, by spatially resolving the broad line region. We detect a 40 micro-arcsecond (0.31 pc) spatial offset between the red and blue photocenters of the H$\alpha$ line that traces the velocity gradient of a rotating broad line region. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2x10$^{8}$ solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6x10$^{11}$ solar masses, which indicates an under-massive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the supermassive black hole, indicating a delay between galaxy and black hole formation for some systems., Comment: 5 pages Main text, 8 figures, 2 tables, to be published in Nature, under embargo until 29 January 2024 16:00 (London)

From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelgeuse taken with the VLTI/MATISSE instrument before (Dec. 2018), during (Feb. 2020), and after (Dec. 2020) the GDE. We present data in the 3.98 to 4.15\,$\mu$m range to cover SiO spectral features molecules as well as adjacent continuum. We have employed geometrical models, image reconstruction, as well as radiative transfer models to monitor the spatial distribution of SiO over the stellar surface. We find a strongly in-homogeneous spatial distribution of SiO that appears to be looking very different between our observing epochs, indicative of a vigorous activity in the stellar atmosphere. The contrast of our images is small in the pseudo-continuum for all epochs, implying that our MATISSE observations support both cold spot and dust cloud model.

Context. Rocky planets form by the concentration of solid particles in the inner few au regions of planet-forming disks. Their chemical composition reflects the materials in the disk available in the solid phase at the time the planets were forming. Aims. We aim to constrain the structure and dust composition of the inner disk of the young star HD 144432, using an extensive set of infrared interferometric data taken by the Very Large Telescope Interferometer (VLTI), combining PIONIER, GRAVITY, and MATISSE observations. Methods. We introduced a new physical disk model, TGMdust, to image the interferometric data, and to fit the disk structure and dust composition. We also performed equilibrium condensation calculations with GGchem. Results. Our best-fit model has three disk zones with ring-like structures at 0.15, 1.3, and 4.1 au. Assuming that the dark regions in the disk at ~0.9 au and at ~3 au are gaps opened by planets, we estimate the masses of the putative gap-opening planets to be around a Jupiter mass. We find evidence for an optically thin emission ($\tau<0.4$) from the inner two disk zones ($r<4$ au) at $\lambda>3\ \mu$m. Our silicate compositional fits confirm radial mineralogy gradients. To identify the dust component responsible for the infrared continuum emission, we explore two cases for the dust composition, one with a silicate+iron mixture and the other with a silicate+carbon one. We find that the iron-rich model provides a better fit to the spectral energy distribution. Conclusions. We propose that in the warm inner regions ($r<5$ au) of typical planet-forming disks, most if not all carbon is in the gas phase, while iron and iron sulfide grains are major constituents of the solid mixture along with forsterite and enstatite. Our analysis demonstrates the need for detailed studies of the dust in inner disks with new mid-infrared instruments such as MATISSE and JWST/MIRI., Comment: 29 pages, 24 figures

The possibility of watching the Universe expand in real time and in a model-independent way, first envisaged by Allan Sandage more than 60 years ago and known as the redshift drift, is within reach of forthcoming astrophysical facilities, particularly the Extremely Large Telescope (ELT) and the Square Kilometre Array Observatory (SKAO). The latter, probing lower redshifts, enables us to watch the Universe's acceleration era in real time, while the former does the same for the matter era. We use Fisher Matrix Analysis techniques, which we show to give comparable results to those of a Markov Chain Monte Carlo approach, to discuss forecasts for SKAO measurements of the redshift drift and their cosmological impact. We consider specific fiducial cosmological models but mainly rely on a more agnostic cosmographic series (which includes the deceleration and jerk parameters), and we also discuss prospects for measurements of the drift of the drift. Overall, our analysis shows that SKAO measurements, with a reasonable amount of observing time, can provide a competitive probe of the low-redshift accelerating Universe., Comment: 13 pages, 5 figures, 7 tables; MNRAS (in press)

The 'Great Dimming' of the prototypical red supergiant Betelgeuse, which occurred between December 2019 and April 2020, gives us unprecedented insight into the processes occurring on the stellar surface and in the inner wind of this type of star. In particular it may bring further understanding of their dust nucleation and mass loss processes. Here, we present and analyse VLTI/MATISSE observations in the N-band (8 - 13 $\mu$m) taken near the brightness minimum in order to assess the status of the dusty circumstellar environment. We explore the compatibility of a dust clump obscuring the star with our mid-infrared interferometric observations using continuum 3D radiative transfer modelling, and probe the effect of adding multiple clumps close to the star on the observables. We also test the viability of a large cool spot on the stellar surface without dust present in the ambient medium. Using the visibility data, we derive a uniform disk diameter of 59.02 $\pm$ 0.64 mas in the spectral range 8 to 8.75 $\mu$m. We find that both the dust clump and the cool spot models are compatible with the data. Further to this, we note that the extinction and emission of our localised dust clump in the line of sight of the star, directly compensate each other making the clump undetectable in the spectral energy distribution and visibilities. The lack of infrared brightening during the 'Great Dimming' therefore does not exclude extinction due to a dust clump as one of the possible mechanisms. The visibilities can be reproduced by a spherical wind with dust condensing at 13 stellar radii and a dust mass-loss rate of (2.1 - 4.9) $\times$ 10$^{-10}$ $\mathit{M}_{\odot} {\rm yr}^{-1}$, however, in order to reproduce the complexity of the observed closure phases, additional surface features or dust clumps would be needed., Comment: 13 Pages, accepted for publication in A&A

AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies., Comment: 19 pages, published in A&A

The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data indicate that the dusty passive disk is silicate-rich. Only the innermost region of said dusty disk is found to emit strongly in the $N$ band, and it is resolved at an angular size of $\sim5$ mas, which translates to a diameter of about 2 au. The observations therefore place stringent constraints for the outer radius of the inner accretion disk. Dust radiative transfer simulations with RADMC-3D provide adequate fits to the spectral energy distribution from the optical to the submillimeter and to the interferometric observables when opting for an accretion rate $\dot{M}\sim 2\times 10^{-5}\, M_\odot$ yr$^{-1}$ and assuming $M_*=0.6\, M_\odot$. Most importantly, the hot inner accretion disk's outer radius can be fixed at 0.3 au. The outer radius of the dusty disk is placed at 100 au, based on constraints from scattered-light images in the literature. The dust mass contained in the disk is $2.4\times10^{-4}\, M_\odot$, and for a typical gas-to-dust ratio of 100, the total mass in the disk is approximately 0.02 $M_\odot$. We did not find any evidence for a nearby companion in the current interferometric data, and we tentatively explored the case of disk misalignment. For the latter, our modeling results suggest that the disk orientation is similar to that found in previous imaging studies by ALMA. Should there be an asymmetry in the very compact, inner accretion disk, this might be resolved at even smaller spatial scales ($\leq1$ mas)., Comment: 17 pages, 14 figures, to be published in Astronomy & Astrophysics

Red supergiants are the most common final evolutionary stage of stars that have initial masses between 8 and 35 times that of the Sun. During this stage, which lasts roughly 100,000 years1, red supergiants experience substantial mass loss. However, the mechanism for this mass loss is unknown. Mass loss may affect the evolutionary path, collapse and future supernova light curve of a red supergiant, and its ultimate fate as either a neutron star or a black hole. From November 2019 to March 2020, Betelgeuse - the second-closest red supergiant to Earth (roughly 220 parsecs, or 724 light years, away) - experienced a historic dimming of its visible brightness. Usually having an apparent magnitude between 0.1 and 1.0, its visual brightness decreased to 1.614 +/- 0.008 magnitudes around 7-13 February 2020 - an event referred to as Betelgeuse's Great Dimming. Here we report high-angular-resolution observations showing that the southern hemisphere of Betelgeuse was ten times darker than usual in the visible spectrum during its Great Dimming. Observations and modelling support a scenario in which a dust clump formed recently in the vicinity of the star, owing to a local temperature decrease in a cool patch that appeared on the photosphere. The directly imaged brightness variations of Betelgeuse evolved on a timescale of weeks. Our findings suggest that a component of mass loss from red supergiants is inhomogeneous, linked to a very contrasted and rapidly changing photosphere

A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the L band, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for 'bad calibrator' detection.

Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 {\mu}m), M (4.5 to 5 {\mu}m), and N (8 to 13 {\mu}m) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics (RHD) simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes Optim3D and Radmc3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of the stellar surface and circumstellar environment across a very large spectral domain for the first time., Comment: Accepted for publication on Astronomy and Astrophysics

Context: FS Canis Majoris (FS CMa, HD 45677) is an unclassified B[e] star surrounded by an inclined dust disk. The evolutionary stage of FS CMa is still debated. Perpendicular to the circumstellar disk, a bipolar outflow was detected. Infrared aperture-synthesis imaging provides us with a unique opportunity to study the disk structure. Aims: Our aim is to study the intensity distribution of the disk of FS CMa in the mid-infrared L and N bands. Methods: We performed aperture-synthesis imaging of FS CMa with the MATISSE instrument (Multi AperTure mid-Infrared SpectroScopic Experiment) in the low spectral resolution mode to obtain images in the L and N bands. We computed radiative transfer models that reproduce the L- and N-band intensity distributions of the resolved disks. Results: We present L- and N-band aperture-synthesis images of FS CMa reconstructed in the wavelength bands of 3.4-3.8 and 8.6-9.0 micrometer. In the L-band image, the inner rim region of an inclined circumstellar disk and the central object can be seen with a spatial resolution of 2.7 milliarcsec (mas). An inner disk cavity with an angular diameter of 6x12mas is resolved. The L-band disk consists of a bright northwestern (NW) disk region and a much fainter southeastern (SE) region. The images suggest that we are looking at the bright inner wall of the NW disk rim, which is on the far side of the disk. In the N band, only the bright NW disk region is seen. In addition to deriving the inclination and the inner disk radius, fitting the reconstructed brightness distributions via radiative transfer modeling allows one to constrain the innermost disk structure, in particular the shape of the inner disk rim., Comment: accepted for publication in A&A

Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now., Comment: 24 pages, 26 figures, submitted to Astronomy & Astrophysics

Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon content especially in the planet-forming regions ($\sim $0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons (PAHs)), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions ($\sim$ 1 to 10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution (SED) and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.

The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars., Comment: 13 pages, 8 figures, accepted in Astronomy and Astrophysics

Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $\mu$m-sized grains. Refractory grains or large ($\gtrsim 10\ \mu$m-sized) grains could be the origin for this emission., Comment: accepted for publication in A&A

The inner regions of protoplanetary discs (from $\sim$ 0.1 to 10 au) are the expected birthplace of planets, especially telluric. In those high temperature regions, solids can experience cyclical annealing, vaporisation and recondensation. Hot and warm dusty grains emits mostly in the infrared domain, notably in N-band (8 to 13~$\mu$m). Studying their fine chemistry through mid-infrared spectro-interferometry with the new VLTI instrument MATISSE, which can spatially resolve these regions, requires detailed dust chemistry models. Using radiative transfer, we derived infrared spectra of a fiducial static protoplanetary disc model with different inner disc ($< 1$ au) dust compositions. The latter were derived from condensation sequences computed at LTE for three initial $C/O$ ratios: subsolar ($C/O=0.4$), solar ($C/O=0.54$), and supersolar ($C/O=1$). The three scenarios return very different N-band spectra, especially when considering the presence of sub-micron-sized dust grains. MATISSE should be able to detect these differences and trace the associated sub-au-scale radial changes. We propose a first interpretation of N-band `inner-disc' spectra obtained with the former VLTI instrument MIDI on three Herbig stars (HD142527, HD144432, HD163296) and one T Tauri star (AS209). Notably, we could associate a supersolar (`carbon-rich') composition for HD142527 and a subsolar (`oxygen-rich') one for HD1444432. We show that the inner disc mineralogy can be very specific and not related to the dust composition derived from spatially unresolved mid-infrared spectroscopy. We highlight the need for including more complex chemistry when interpreting solid-state spectroscopic observations of the inner regions of discs, and for considering dynamical aspects for future studies., Comment: accepted for publication in MNRAS, 13 pages, 4 figures

We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3-13 mum). It gathers data for half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD database. We cross-match 26 databases to provide basic information, binarity elements, angular diameter, magnitude and flux in the near and mid-infrared, as well as flags that allow us to identify the potential calibrators. The catalogue covers the entire sky with 465 857 stars, mainly dwarfs and giants from B to M spectral types closer than 18 kpc. The smallest reported values reach 0.16 muJy in L and 0.1 muJy in N for the flux, and 2 microarcsec for the angular diameter. We build 4 lists of calibrator candidates for the L- and N-bands suitable with the Very Large Telescope Interferometer (VLTI) sub- and main arrays using the MATISSE instrument. We identify 1 621 candidates for L and 44 candidates for N with the Auxiliary Telescopes (ATs), 375 candidates for both bands with the ATs, and 259 candidates for both bands with the Unit Telescopes (UTs). Predominantly cool giants, these sources are small and bright enough to belong to the primary lists of calibrator candidates. In the near future, we plan to measure their angular diameter with 1% accuracy., Comment: Accepted for publication in MNRAS (2019, oct. 1st)

Context. WR104 is an emblematic dusty Wolf-Rayet star and the prototypical member of a subgroup hosting spirals that are mainly observable with high-angular resolution techniques. Previous aperture masking observations showed that WR104 is likely an interacting binary star at the end of its life. However, several aspects of the system are still unknown. This includes the opening angle of the spiral, the dust formation locus, and the link between the central binary star and a candidate companion star detected with the Hubble Space Telescope (HST) at 1". Aims. Our aim was to directly image the dusty spiral or "pinwheel" structure around WR104 for the first time and determine its physical properties at large spatial scales. We also wanted to address the characteristics of the candidate companion detected by the HST. Methods. For this purpose, we used SPHERE and VISIR at the Very Large Telescope to respectively image the system in the near-and mid-infrared. Both instruments furnished an excellent view of the system at the highest angular resolution a single, ground-based telescope can provide. Based on these direct images, we then used analytical and radiative transfer models to determine several physical properties of the system. Results. Employing a different technique than previously used, our new images have allowed us to confirm the presence of the dust pinwheel around the central star. We have also detected up to 5 revolutions of the spiral pattern of WR104 in the K-band for the first time. The circumstellar dust extends up to 2 arcsec from the central binary star in the N-band, corresponding to the past 20 years of mass loss. Moreover, we found no clear evidence of a shadow of the first spiral coil onto the subsequent ones, which likely points to a dusty environment less massive than inferred in previous studies. We have also confirmed that the stellar candidate companion previously detected by the HST is gravitationally bound to WR104 and herein provide information about its nature and orbital elements.

Context. Protoplanetary disks show large diversity regarding their morphology and dust composition. With mid-infrared interferometry the thermal emission of disks can be spatially resolved, and the distribution and properties of the dust within can be studied. Aims. Our aim is to perform a statistical analysis on a large sample of 82 disks around low- and intermediate-mass young stars, based on mid-infrared interferometric observations. We intend to study the distribution of disk sizes, variability, and the silicate dust mineralogy. Methods. Archival mid-infrared interferometric data from the MIDI instrument on the VLTI are homogeneously reduced and calibrated. Geometric disk models are used to fit the observations to get spatial information about the disks. An automatic spectral decomposition pipeline is applied to analyze the shape of the silicate feature. Results. We present the resulting data products in the form of an atlas, containing N band correlated and total spectra, visibilities, and differential phases. The majority of our data can be well fitted with a continuous disk model, except for a few objects, where a gapped model gives a better match. From the mid-infrared size--luminosity relation we find that disks around T Tauri stars are generally colder and more extended with respect to the stellar luminosity than disks around Herbig Ae stars. We find that in the innermost part of the disks ($r \lesssim 1$~au) the silicate feature is generally weaker than in the outer parts, suggesting that in the inner parts the dust is substantially more processed. We analyze stellar multiplicity and find that in two systems (AB Aur and HD 72106) data suggest a new companion or asymmetric inner disk structure. We make predictions for the observability of our objects with the upcoming MATISSE instrument, supporting the practical preparations of future MATISSE observations of T Tauri stars., Comment: 54 pages, 14 figures, 6 tables, accepted for publication in A&A

The Atacama Millimeter/submillimeter Array (ALMA) Phasing Project (APP) has developed and deployed the hardware and software necessary to coherently sum the signals of individual ALMA antennas and record the aggregate sum in Very Long Baseline Interferometry (VLBI) Data Exchange Format. These beamforming capabilities allow the ALMA array to collectively function as the equivalent of a single large aperture and participate in global VLBI arrays. The inclusion of phased ALMA in current VLBI networks operating at (sub)millimeter wavelengths provides an order of magnitude improvement in sensitivity, as well as enhancements in u-v coverage and north-south angular resolution. The availability of a phased ALMA enables a wide range of new ultra-high angular resolution science applications, including the resolution of supermassive black holes on event horizon scales and studies of the launch and collimation of astrophysical jets. It also provides a high-sensitivity aperture that may be used for investigations such as pulsar searches at high frequencies. This paper provides an overview of the ALMA Phasing System design, implementation, and performance characteristics., Comment: Accepted to PASP; 23 pages

We present an overview of the scientific potential of MATISSE, the Multi Aperture mid-Infrared SpectroScopic Experiment for the Very Large Telescope Interferometer. For this purpose we outline selected case studies from various areas, such as star and planet formation, active galactic nuclei, evolved stars, extrasolar planets, and solar system minor bodies and discuss strategies for the planning and analysis of future MATISSE observations. Moreover, the importance of MATISSE observations in the context of complementary high-angular resolution observations at near-infrared and submillimeter/millimeter wavelengths is highlighted., Comment: SPIE Astronomical Telescopes and Instrumentation conference, June 2016, 20 pages, 6 Figures

MATISSE (Multi AperTure mid-Infrared SpectroScopic Experiment) is the next generation spectro-interferometer at the European Southern Observatory VLTI operating in the spectral bands L, M and N, and combining four beams from the unit and auxiliary telescopes. MATISSE is now fully integrated at the Observatoire de la C\^ote d'Azur in Nice (France), and has entered very recently its testing phase in laboratory. This paper summarizes the equations describing the MATISSE signal and the associated sources of noise. The specifications and the expected performances of the instrument are then evaluated taking into account the current characteristics of the instrument and the VLTI infrastructure, including transmission and contrast degradation budgets. In addition, we present the different MATISSE simulation tools that will be made available to the future users., Comment: SPIE Astronomical Telescopes and Instrumentation conference, June 2016, 13 pages, 2 Figures

MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal., Comment: SPIE Astronomical Telescopes and Instrumentation conference, June 2016, 11 pages, 6 Figures

We present in this paper the general formalism and data processing steps used in the MATISSE data reduction software, as it has been developed by the MATISSE consortium. The MATISSE instrument is the mid-infrared new generation interferometric instrument of the Very Large Telescope Interferometer (VLTI). It is a 2-in-1 instrument with 2 cryostats and 2 detectors: one 2k x 2k Rockwell Hawaii 2RG detector for L\&M-bands, and one 1k x 1k Raytheon Aquarius detector for N-band, both read at high framerates, up to 30 frames per second. MATISSE is undergoing its first tests in laboratory today., Comment: SPIE, Jun 2016, Edimbourgh, France

MATISSE represents a great opportunity to image the environment around massive and evolved stars. This will allow one to put constraints on the circumstellar structure, on the mass ejection of dust and its reorganization , and on the dust-nature and formation processes. MATISSE measurements will often be pivotal for the understanding of large multiwavelength datasets on the same targets collected through many high-angular resolution facilities at ESO like sub-millimeter interferometry (ALMA), near-infrared adaptive optics (NACO, SPHERE), interferometry (PIONIER, GRAVITY), spectroscopy (CRIRES), and mid-infrared imaging (VISIR). Among main sequence and evolved stars, several cases of interest have been identified that we describe in this paper., Comment: SPIE, Jun 2016, Edimbourgh, France

The main purpose of this paper is to study the existence of solutions for the following hybrid nonlinear fractional pantograph equation $$ \left\{\begin{aligned} &D_{0+}^\alpha \left[\frac{x(t)}{f(t,x(t),x(\varphi(t)))}\right]=g(t,x(t),x(\rho(t))),\,\,0