Search

Tin halide perovskites are the most promising candidate materials for lead‐free perovskite solar cells (PSCs) thanks to their low toxicity and ideal band gap energies. The introduction of 2D/3D mixed perovskite phases in tin‐based PSCs (TPSCs) has proven to be the most effective approach to improving device efficiency and stability. However, a 2D perovskite phase normally shows relatively low carrier mobility, which will be unfavorable for carrier transfer in the devices. In this work, we used a thiophene‐based cation 2‐(thiophen‐3‐yl)ethan‐1‐aminium (3‐TEA) as a spacer to form a novel 2D perovskite phase in TPSCs, which shows the most promising effect on the performance enhancement in comparison with other cations like 2‐(thiophen‐2‐yl)ethan‐1‐aminium (2‐TEA) and benzene‐based 2‐phenylethan‐1‐aminium (PEA). Theoretical calculations reveal that 3‐TEA enables the most compact crystal packing of [SnI6]4− octahedral layers, resulting in the lowest hole effective mass and formation energy in the 2D phase. This effect significantly enhances device efficiency and stability by facilitating more efficient carrier transfer within the 2D phase. These findings indicate that thiophene‐based 2D perovskites are well‐suited for high‐performance TPSCs. [ABSTRACT FROM AUTHOR]

In the past several years, organic–inorganic hybrid perovskites and all inorganic perovskites have attracted enormous research interest in a variety of optoelectronic applications including solar cells, light‐emitting diodes, semiconductor lasers, and photodetectors for their plenty of appealing electrical and optoelectrical properties. Benefiting from the inherent amplification function of transistors and the pronounced photogating effect, perovskite‐based phototransistors and hybrid photodetectors can provide very high photoresponsivity and gain, rendering them highly promising for some specific applications especially ultrasensitive light detection. A review on the recent progress of phototransistors and hybrid photodetectors using perovskites as light‐sensitive materials is presented. The efforts and development in 3D and 2D perovskite‐based phototransistors, and perovskite/functional material (e.g., graphene, 2D semiconductors, organic semiconductors, and other semiconductors) heterojunction‐based hybrid photodetectors are introduced and discussed systematically. Some processing techniques for optimizing device performance are also addressed. In the final section, a conclusion of the research achievements is presented and possible challenges as well as outlook are provided to guide future activity in this research field. [ABSTRACT FROM AUTHOR]

[4-(3,6-dimethyl-9H-carbazol-9yl)butyl]phosphonic acid (Me-4PACz) self-assembled molecules (SAM) are an effective method to solve the problem of the buried interface of NiO x in inverted perovskite solar cells (PSCs). However, the Me-4PACz end group (carbazole core) cannot forcefully passivate defects at the bottom of the perovskite film. Here, a Co-SAM strategy is employed to modify the buried interface of PSCs. Me-4PACz is doped with phosphorylcholine chloride (PC) to form a Co-SAM to improve the monolayer coverage and reduce leakage current. The phosphate group and chloride ions (Cl - ) in PC can inhibit NiO x surface defects. Meantime, the quaternary ammonium ions and Cl - in PC can fill organic cations and halogen vacancies in the perovskite film to enable defects passivation. Moreover, Co-SAM can promote the growth of perovskite crystals, collaboratively solve the problem of buried defects, suppress nonradiative recombination, accelerate carrier transmission, and relieve the residual stress of the perovskite film. Consequently, the Co-SAM modified devices show power conversion efficiencies as high as 25.09% as well as excellent device stability with 93% initial efficiency after 1000 h of operation under one-sun illumination. This work demonstrates the novel approach for enhancing the performance and stability of PSCs by modifying Co-SAM on NiO x ., (© 2024 Wiley‐VCH GmbH.)

Sn-Pb mixed perovskites with bandgaps in the range of 1.1-1.4 eV are ideal candidates for single-junction solar cells to approach the Shockley-Queisser limit. However, the efficiency and stability of Sn-Pb mixed-perovskite solar cells (PSCs) still lag far behind those of Pb-based counterparts due to the easy oxidation of Sn 2+ . Here, a reducing agent 4-hydrazinobenzoic acid is introduced as an additive along with SnF 2 to suppress the oxidation of Sn 2+ . Meanwhile, a vertical Pb/Sn compositional gradient is formed spontaneously after an antisolvent treatment due to different solubility and crystallization kinetics of Sn- and Pb-based perovskites and it can be finely tuned by controlling the antisolvent temperature. Because the band structure of a perovskite is dependent on its composition, graded vertical heterojunctions are constructed in the perovskite films with a compositional gradient, which can enhance photocarrier separation and suppress carrier recombination in the resultant PSCs. Under optimal fabrication conditions, the Sn-Pb mixed PSCs show power conversion efficiency up to 22% along with excellent stability during light soaking., (© 2021 Wiley-VCH GmbH.)