Search

In this work, a geological sample of great astrobiological interest was studied through analytical techniques that are currently operating in situ on Mars and others that will operate in the near future. The sample analyzed consisted of an oncoid, which is a type of microbialite, collected in the Salar Carachi Pampa, Argentina. The main peculiarity of microbialites is that they are organo-sedimentary deposits formed by the in situ fixation and precipitation of calcium carbonate due to the growth and metabolic activities of microorganisms. For this reason, the Carachi Pampa oncoid was selected as a Martian analog for astrobiogeochemistry study. In this sense, the sample was characterized by means of the PIXL-like, SuperCam-like and SHERLOC-like instruments, which represent instruments on board the NASA Perseverance rover, and by means of RLS-like and MOMA-like instruments, which represent instruments on board the future ESA Rosalind Franklin rover. It was possible to verify that the most important conclusions and discoveries have been obtained from the combination of the results. Likewise, it was also shown that Perseverance rover-like remote-sensing instruments allowed a first detailed characterization of the biogeochemistry of the Martian surface. With this first characterization, areas of interest for in-depth analysis with Rosalind Franklin-like instruments could be identified. Therefore, from a first remote-sensing elemental identification (PIXL-like instrument), followed by a remote-sensing molecular characterization (SuperCam and SHERLOC-like instruments) and ending with an in-depth microscopic analysis (RLS and MOMA-like instruments), a wide variety of compounds were found. On the one hand, the expected minerals were carbonates, such as aragonite, calcite and high-magnesium calcite. On the other hand, unexpected compounds consisted of minerals related to the Martian/terrestrial surface (feldspars, pyroxenes, hematite) and organic compounds related to the past

Raman Laser Spectrometer (RLS) is the Pasteur Payload instrument of the ExoMars mission that will perform Raman spectroscopy for the first time in a planetary space mission. RLS main units are: SPU (SPectrometer Unit), iOH (internal Optical Head), and ICEU (Instrument Control and Excitation Unit), that includes the laser for samples excitation purposes. The iOH focuses the excitation laser into the crushed samples (located at the ALD, Analytical Laboratory Drawer, carrousel) through the excitation path, and collects the Raman emission from the sample (collection path). Its original design presented a high laser trace reaching to the SPU detector, and although a certain level was required for instrument calibration, the found level was expected to be capable of degrading the acquired spectra confounding some Raman peaks. So, the iOH optical and opto-mechanical designs were needed to be updated from the BB (Bread Board) to the engineering and qualification model (iOH EQM), in order to fix the desired amount of laser trace, and after the fabrication and the commitment of the commercial elements, the assembly and integration verification (AIV) process was carried out. Considering the results obtained during the EQM integration verification and the first functional tests, the RLS calibration target (CT) emission analysis, additional changes were found to be required for the Flight Model, FM. In this paper, the RLS iOH designs and functional tests evolutions for the different models are summarized, focusing on the iOH AIV process and emphasizing on the iOH performance evaluation (by using CT spectra) from the re-design activities.

Between February 1 and February 28, 2018, the Austrian Space Forum, in cooperation with research teams from 25 nations, conducted the AMADEE-18 mission—a human-robotic Mars expedition simulation in the Dhofar region in the Sultanate of Oman. As a part of the AMADEE-18 simulated Mars human exploration mission, the Remote Science Support team investigated the Dhofar area (Oman) to qualify it as a potential Mars analog site. The motivation of this research was to study and register selected samples collected by the analog astronauts during the AMADEE-18 mission with the European Space Agency (ESA) ExoMars Raman Laser Spectrometer (RLS) simulator, compare the results with standard laboratory measurements, and establish the implication of the results to the future ESA ExoMars mission. The Raman measurements identified minerals such as carbonates (calcite and dolomite), feldspar and plagioclase (albite, anorthite, orthoclase, and sanidine), Fe-oxides (goethite, hematite, and magnetite), and Ti-oxide (anatase), each relevant to planetary exploration. As we have presented here, Raman spectroscopy is a powerful tool for detecting the presence of organic molecules, particularly by analyzing the principal vibration of C-C and C-H bonds. It has also been shown that portable Raman spectroscopy is a relevant tool for in situ field studies such as those conducted during extra-vehicular activities (EVA) in simulated missions like the AMADEE-18 and the future AMADEE-2020 campaign.

In the present work, near-infrared, laser-induced breakdown spectroscopy, Raman, and X-ray diffractometer techniques have been complementarily used to carry out a comprehensive characterization of a terrestrial analogue selected from the Chesapeake Bay impact structure (CBIS). The obtained data clearly highlight the key role of Raman spectroscopy in the detection of minor and trace compounds, through which inferences about geological processes occurred in the CBIS can be extrapolated. Beside the use of commercial systems, further Raman analyses were performed by the Raman laser spectrometer (RLS) ExoMars Simulator. This instrument represents the most reliable tool to effectively predict the scientific capabilities of the ExoMars/Raman system that will be deployed on Mars in 2021. By emulating the analytical procedures and operational restrictions established by the ExoMars mission rover design, it was proved that the RLS ExoMars Simulator can detect the amorphization of quartz, which constitutes an analytical clue of the impact origin of craters. Beside amorphized minerals, the detection of barite and siderite, compounds crystallizing under hydrothermal conditions, helps indirectly to confirm the presence of water in impact targets. Furthermore, the RLS ExoMars Simulator capability of performing smart molecular mappings was successfully evaluated.

The Mastcam-Z Camera is a stereoscopic, multispectral camera with zoom capability on NASA’s Mars-2020 Perseverance rover. The Mastcam-Z relies on a set of two deck-mounted radiometric calibration targets to validate camera performance and to provide an instantaneous estimate of local irradiance and allow conversion of image data to units of reflectance (R or I/F) on a tactical timescale. Here, we describe the heritage, design, and optical characterization of these targets and discuss their use during rover operations. The Mastcam-Z primary calibration target inherits features of camera calibration targets on the Mars Exploration Rovers, Phoenix and Mars Science Laboratory missions. This target will be regularly imaged during flight to accompany multispectral observations of the martian surface. The primary target consists of a gold-plated aluminum base, eight strong hollow-cylinder SmCo alloy permanent magnets mounted in the base, eight ceramic color and grayscale patches mounted over the magnets, four concentric, ceramic grayscale rings and a central aluminum shadow post (gnomon) painted with an IR-black paint. The magnets are expected to keep the central area of each patch relatively free of Martian aeolian dust. The Mastcam-Z secondary calibration target is a simple angled aluminum shelf carrying seven vertically mounted ceramic color and grayscale chips and seven identical, but horizontally mounted ceramic chips. The secondary target is intended to augment and validate the calibration-related information derived from the primary target. The Mastcam-Z radiometric calibration targets are critically important to achieving Mastcam-Z science objectives for spectroscopy and photometric properties.

The ExoMars rover, scheduled to be launched in 2020, will be equipped with a novel and diverse payload. It will also include a drill to collect subsurface samples (from 0- to 2-m depth) and deliver them to the rover analytical laboratory, where it will be possible to perform combined science between instruments. For the first time, the exact same sample target areas will be investigated using complementary analytical methods—infrared spectrometry, Raman spectrometry, and laser desorption mass spectrometry—to establish mineralogical and organic chemistry composition. Fundamental for implementing this cooperative science strategy is the Raman Laser Spectrometer (RLS) calibration target (CT). The RLS CT features a polyethylene terephthalate disk used for RLS calibration and verification of the instrument during the mission. In addition, special patterns have been recorded on the RLS CT disk that the other instruments can detect and employ to determine their relative position. In this manner, the RLS CT ensures the spatial correlation between the three analytical laboratory instruments: MicrOmega, RLS, and MOMA. The RLS CT has been subjected to a series of tests to qualify it for space utilization and to characterize its behavior during the mission. The results from the joint work performed by the RLS and MicrOmega instrument teams confirm the feasibility of the “combined science” approach envisioned for ExoMars rover operations, whose science return is optimized when complementing the RLS and MicrOmega joint analysis with the autonomous RLS operation.

Raman and laser-induced breakdown spectroscopy (LIBS) spectroscopies will play an important role in planetary exploration missions in the following years, not only with Raman instruments like Raman laser spectrometer on board of Rosalid Franklin Rover or scanning habitable environments with Raman and luminescence for organics and chemicals on board Mars2020 Rover but also with combined instruments such as SuperCam. These techniques will be part of the upcoming planetary exploration missions because they can provide complementary information from the analysed sample while potentially sharing hardware components, maximizing the scientific return of the samples while limiting mass. In this framework, this study seeks to test the feasibility of combining several univariate and multivariate analysis techniques with data fusion techniques of different instruments (532 and 785 nm Raman and LIBS) to evaluate the improvements in the quantitative classification of samples in binary mixtures. We prepared two-component mixtures that are potentially relevant in planetary exploration missions, using two different sulfates and a chloride. A more accurate classification of the samples is possible through a univariate analysis that combines the calculated concentration indicators for Raman and LIBS. On the other hand, multivariate analysis was run on Raman, LIBS, and Raman + LIBS low-level fused data sets. The results showed a better improvement when fusing LIBS and Raman when compared with the redundant fusion but not a systematic improvement when compared with individual sets. We demonstrate that a quantification of the mineral abundances in binary mixtures can be obtained from Raman and LIBS data using univariate and multivariate analysis techniques, being the latter remarkably better, moving from performances of classification, in the whole range of concentrations, that could be over the 10% to values under 3.5%. Furthermore, the fusion of data coming from these techniques impro

The pumice volcanic samples could have possible connections to the evolution of life and give us insight about their bio-geochemical processes related. In this regard, the samples from the volcanic eruption from La Restinga (El Hierro, Spain) in 2011 have been mainly studied by means of Raman spectroscopy. The research also includes analysis of XRD, Scanning Electron Microscopy and Optical Microscopy to support the Raman analysis. The results show that the Raman methods and mineral analyses are in strong agreement with the results obtained from other authors and techniques. The internal white foamy core (WFC) of the studied pumice samples shows amorphous silica, Fe-oxides, Ti-oxides, quartz, certain sulfates, carbonates, zeolites and organics. On the other hand, the external part (dark crust – DC) of these samples mainly presents primary-sequence mineralogy combined with some secondary alteration minerals such as olivine, feldspar, pyroxene, amorphous silica, and Fe-oxide. Raman spectroscopy detected other minerals not yet reported on these samples like barite, celestine and lepidocrocite. Also, the different chemometric and calibration methods for Raman spectroscopy in elemental composition, mineral classification and structural characterization has been successfully applied. From the astrobiological perspective, the research was also complemented with comparisons to other similar samples from terrestrial analogs. The main consideration was taking into account the proposed hypothesis regarding the potential behavior of the pumice as a substrate for the evolution of life. Furthermore, the detailed analysis from La Restinga eruption is coherent with the mineral phases and processes discussed from previous literature. The white internal part fulfills the conditions to work as an organic reservoir, confirmed by the detection of organic matter and selected minerals that could be used as energy sources for bacterial communities. The external layers of the samples work as

The outcrop of “Los Azulejos” is visible at the interior of the Cañadas Caldera in Tenerife Island (Spain). It exhibits a great variety of alteration processes that could be considered as terrestrial analogue for several geological processes on Mars. This outcrop is particularly interesting due to the content of clays, zeolite, iron oxides, and sulfates corresponding to a hydrothermal alteration catalogued as “Azulejos” type alteration. A detailed analysis by portable and laboratory Raman systems as well as other different techniques such as X ray diffraction (XRD) and Mössbauer spectroscopy has been carried out (using twin-instruments from Martian lander missions: Mössbauer spectrometer MIMOS-II from the NASA-MER mission of 2001 and the XRD diffractometer from the NASA-MSL Curiosity mission of 2012). The mineral identification presents the following mineral species: magnetite, goethite, hematite, anatase, rutile, quartz, gregoryite, sulphate (thenardite and hexahydrite), diopside, feldspar, analcime, kaolinite and muscovite. Moreover, the in-situ Raman and Micro-Raman measurements have been performed in order to compare the capabilities of the portable system specially focused for the next ESA Exo-Mars mission. The mineral detection confirms the sub-aerial alteration on the surface and the hydrothermal processes by the volcanic fluid circulations in the fresh part. Therefore, the secondary more abundant mineralization acts as the color agent of the rocks. Thus, the zeolite-illite group is the responsible for the bluish coloration, as well as the feldspars and carbonates for the whitish and the iron oxide for the redish parts. The XRD system was capable to detect a minor proportion of pyroxene, which is not visible by Raman and Mössbauer spectroscopy due to the “Azulejos” alteration of the parent material on the outcrop. On the other hand, Mössbauer spectroscopy was capable of detecting different types of iron-oxides (Fe3+/2+-oxide phases). These analyses emphasize

[ES] Se ha llevado a cabo una selección de varios afloramientos volcánicos en la Isla de Tenerife (La Caldera de las Cañadas, vulcanismo histórico y la zona del Malpaís de Güimar) como posibles análogos terrestres de Marte, considerando los procesos volcánicos ocurridos durante algunas de las etapas geológicas del planeta rojo. En la selección de las áreas de estudio se han tenido en cuenta la diversidad de procesos de alteración, que incluyen fenómenos como meteorización y alteración hidrotermal. Estos procesos terrestres podrían servir como modelo de la actividad volcánica primitiva en Marte. Los materiales seleccionados se han analizado mediante espectroscopia micro-Raman, difracción de rayos X (DRX) y espectroscopia Mössbauer. Los resultados revelan que la mineralogía de los afloramientos está constituida por una matriz de olivinos, piroxenos y feldespatos. Además, se ha detectado una gran variedad de especies minerales correspondientes a procesos de alteración como óxidos, arcillas y carbonatos. Los resultados obtenidos han demostrado ser un punto de partida para desarrollar investigaciones en estos entornos volcánicos especialmente enfocados al desarrollo de la ciencia de instrumentación para exploración planetaria. La instrumentación utilizada en la investigación ha sido a través de prototipos gemelos empleados en la exploración espacial, como DRX (actualmente en la misión NASA-MSL-Curiosity), espectroscopia Mössbauer (a bordo de la misión NASA-MER) y el futuro instrumento Raman de la misión ESA-ExoMars. Además, la mineralogía detectada coincide con los resultados reportados en Marte. Los métodos de análisis Raman, tanto de caracterización e identificación, mediante el estudio de patrones espectrales se han aplicado exitosamente, donde el análisis de los perfiles Raman son de extrema utilidad para aclarar el origen de las especies minerales. La espectroscopia Mössbauer y la difracción de rayos X han confirmado los resultados Raman., [EN] Several volcanic outcrops from Tenerife Island (Las Cañadas Caldera, historical volcanism and Güimar-Malpaís outcrop) has been selected as a potential terrestrial analog for Mars, regarding the Martian mineralogy and its volcanic characteristic. Diverse alteration processes, including weathering and hydrothermal alteration have been detected in these volcanics environments, which could be considered as part of a model for the primitive volcanic activity of Mars. The selected materials have been measured by micro-Raman spectroscopy, XRD and Mössbauer spectroscopy. The results show the primary mineralogy comprises on olivine, pyroxene and feldspar. Also, a wide variety of alterational materials, including oxides, clay minerals and carbonates have been detected. The results have proven to be a starting point to develop research focused to the development of science instrumentation for planetary exploration in volcanic environments. The instrumentation used was primarily through twin prototypes applied in space exploration such as XRD (on board at the NASA-MSL-Curiosity mission), Mössbauer spectroscopy (on board at the NASA-MER mission) and the future Raman instrument on ESA mission -ExoMars. In addition, the detected mineralogy is consistent with results reported on Mars. The Raman spectral analisys methods, characterization and identification, have been applied, where the analysis of the Raman profiles are extremely useful to clarify the geochemical origin of the mineral species. On the other hand, the results obtained by Raman have been confirmed by Mössbauer spectroscopy and X-ray diffraction.

A detailed vibrational Raman-IR spectroscopic and diffractional analyses have been performed on basalts from two locations from Tenerife Island: (1) the Arenas Negras volcano which belongs to the historical eruption not showing visible alteration and (2) Pillow Lavas zone from Anaga Massif which shows a clearly fluid-rock interaction caused by submarine alteration. These places have been extensively studied due to its similarity with the surface of Mars. The analysis is based on the mineral detection of selected samples by a Micro-Raman study of the materials. The complementary techniques have confirmed the mineralogy detected by the Raman measurement. The results show a volcanic environment behavior with primary phases like olivine, pyroxene, and feldspar/plagioclase. Moreover, the presence of accessory minerals or secondary mineralization like phosphate, iron oxides, zeolite or carbonates shows the alteration processes on each outcrop. Moreover, the variation in the crystallinity and amorphous phases is related to fluid-rock interaction caused by hydrothermal episodes and external weathering processes, which shows several analogies with the ancient volcanic activity from Mars.