Search

PurposeThis study aims to investigate the association between serum carotenoids and hyperuricemia.MethodsData were sourced from the National Health and Nutrition Examination Survey (NHANES) between 2001 and 2006. Hyperuricemia was defined as serum uric acid (UA) levels of ≥7 mg/dL for males and ≥ 6 mg/dL for females. Serum carotenoid levels were measured using high-performance liquid chromatography. Multivariate linear regression was used to analyze the correlation between serum carotenoids and UA levels. Multivariate logistic regression and restricted cubic spline (RCS) analyses were performed to explore the potential association between serum carotenoids and hyperuricemia. Additionally, subgroup and interaction analyses were conducted to determine variations across different population groups.ResultThis cross-sectional study included 13,561 participants. Multivariate linear regression analysis revealed that higher levels of serum carotenoids were correlated with lower UA levels. Specifically, the beta coefficients (β) and 95% confidence intervals (CIs) were as follows: α-carotene (−0.23 [−0.31, −0.15]), β-carotene (−0.30 [−0.38, −0.21]), β-cryptoxanthin (−0.17 [−0.25, −0.09]), lutein/zeaxanthin (−0.12 [−0.20, −0.04]), and total serum carotenoids (−0.25 [−0.33,-0.16]). However, lycopene showed no significant correlation with UA (−0.01 [−0.09, 0.08]). Multivariate logistic regression analysis indicates a significant inverse association between serum carotenoids and the risk of hyperuricemia. The odds ratios (ORs) and 95%CIs were as follows: α-carotene (0.61 [0.49, 0.77]), β-carotene (0.67 [0.51, 0.86]), β-cryptoxanthin (0.69 [0.51, 0.88]), lutein/zeaxanthin (0.72 [0.56, 0.97]), lycopene (0.82 [0.67, 1.00]) and total serum carotenoids (0.73 [0.57, 0.92]). RCS analysis indicated a potential nonlinear relationship between lycopene and hyperuricemia, with an inflection point at 33.45 μg/dL. Subgroup and interaction analyses demonstrated that the inverse association remained consistent across various demographic groups.ConclusionThis study found that higher serum carotenoid levels are associated with lower UA levels and reduced risk of hyperuricemia. Notably, while lycopene was associated with reduced hyperuricemia risk, its effect showed some heterogeneity.

The rapid urbanization witnessed in recent years has led to the deterioration of urban ecosystems, resulting in various environmental and socioeconomic challenges. In response to these concerns, the implementation of Green and Blue Infrastructures (GBI) has gained prominence as a sustainable urban planning approach. GBI is a planned network system of natural and semi-natural spaces, along with other environmental elements, managed and designed to provide a wide range of ecosystem services and improve ecological conditions, thereby contributing to citizens' wellbeing and quality of life. This study presents a comprehensive assessment of the costs, benefits (ecosystem services), and impacts (ecosystem dis-services) associated with the incorporation of GBI in urban environments using the technique of emergy accounting. To achieve this, the research paper introduces a novel integrated valuation framework. This framework encompasses key components such as constructing/maintenance costs, ecosystem services, needed costs to human health and biodiversity damage, as well as ecosystem dis-services. Furthermore, the study conducts a comparative analysis of the costs, benefits, and impacts associated with different urban GBIs via ternary phase diagram, shedding light on their varying contributions to the urban ecosystem. The findings reveal that green roofs offer more ecosystem benefits as compared to other GBIs, but this study also highlights that green roof entail higher initial construction costs and produce a greater number of dis-services. Conversely, street trees have lower initial costs and impacts yet generate higher benefits. Furthermore, green walls, despite having a lower input emergy value and fewer benefits, result in higher impacts compared to other green-blue ecosystems. These findings provide valuable insights for urban planners, policymakers, and stakeholders, enabling them to make informed decisions in developing sustainable cities for the wellbeing of present and future generations.

The geographical mismatch between water availability and demand further exacerbates the challenge of the water-energy-food nexus in China. This study characterizes competing water uses for crops and energy to reveal their resulting impacts on regional inequality by integrating the modified Gini coefficient and unbalanced index with respect to water scarcity and water surplus. From 2000–2019, China’s food production decreased by 2.3 % in the blue water footprint (ranging from −90.3 % to 71.7 % for specific provinces), while the energy sector increased by 111.9 % (varying from −69.9 % to 692.4 %). The energy sector showed greater inequality in blue water consumption verses available water, with the Gini coefficient ranged from 0.43 to 0.62, while the food-water nexus maintained a relatively stable value of approximately 0.35. Spatially, there was consistent water scarcity inequality in the north and water surplus inequality in the south for both the food-water and the energy-water nexus. Overall, the energy-water nexus exhibited larger variations in provincial inequalities. This divergent evolving inequality was primarily caused by a combination of factors that included resource endowments, regional economic disparities, and government interventions. These findings can inform policy makers towards optimizing the management of water-energy-food resources.

Construction workers’ behaviors directly affects labor productivity and their own safety, thereby influencing project quality. Recognizing and monitoring the construction-related behaviors is therefore crucial for high-quality management and orderly construction site operation. Recent strides in computer vision technology suggest its potential to replace traditional manual supervision approaches. This paper explores research on monitoring construction workers’ behaviors using computer vision. Through bibliometrics and content-based analysis, the authors present the latest research in this area from three perspectives: “Detection, Localization, and Tracking for Construction Workers,” “Recognition of Workers’ Construction Activities,” and “Occupational Health and Safety Behavior Monitoring.” In terms of the literature’s volume, there has been a notable increase in this field. Notably, the focus on safety-related literature is predominant, underscoring the concern for occupational health. Vision algorithms have witnessed an increase in the utilization of object detection. The ongoing and future research trajectory is anticipated to involve multi-algorithm integration and an emphasis on enhancing robustness. Then the authors summarize the review from engineering impact and technical suitability, and analyze the limitations of current research from the perspectives of technical approaches and application scenarios. Finally, it discusses future research directions in this field together with generative AI models. Furthermore, the authors hope this paper can serves as a valuable reference for both scholars and engineers.

Abstract Wind power supply chains are evolving as markets expand to reach climate goals. With the largest installed wind power capacity globally, China must deal with increasing composite turbine waste and anticipate its associated costs. Here we predict the quantity and composition of wind turbine blade waste based on historic deployment. A high-resolution database containing 14 turbine capacities (150–5500 kilowatts) was compiled based on 104 turbine models. The environmental and financial costs of waste treatment options were evaluated using a bottom-up approach. Based on current installations and future projections, 7.7 to 23.1 million tonnes of blade waste will be generated in China by 2050. Technologies exist to recycle glass fibre from blade waste, but these solutions vary in level of maturity and are not always commercially available, cost-competitive, or environmentally sustainable. Our findings can inform decision-makers in governments and industry on the pathways to carbon neutrality.

Recognition and classification for construction activities help to monitor and manage construction workers. Deep learning and computer vision technologies have addressed many limitations of traditional manual methods in complex construction environments. However, distinguishing different workers and establishing a clear recognition logic remain challenging. To address these issues, we propose a novel construction activity recognition method that integrates multiple deep learning algorithms. To complete this research, we created three datasets: 727 images for construction entities, 2546 for posture and orientation estimation, and 5455 for worker re-identification. First, a YOLO v5-based model is trained for worker posture and orientation detection. A person re-identification algorithm is then introduced to distinguish workers by tracking their coordinates, body and head orientations, and postures over time, then estimating their attention direction. Additionally, a YOLO v5-based object detection model is developed to identify ten common construction entity objects. The worker’s activity is determined by combining their attentional orientation, positional information, and interaction with detected construction entities. Ten video clips are selected for testing, and a total of 745 instances of workers are detected, achieving an accuracy rate of 88.5%. With further refinement, this method shows promise for a broader application in construction activity recognition, enhancing site management efficiency.

Technique: (1) A four-pointed star-shaped incision was made to separate the skin around the stoma intestine. (2) The stoma intestine was resected, and side-to-side or end-to-side anastomosis was performed to restore the continuity of the intestine. (3) The peritoneum and rectus sheath should be closed using continuous full-thickness sutures. (4) The subcutaneous fat layer and dermis layer should be sutured using purse-string sutures. Two holes should be made in the center of the sutured area. (5) The cross should be sutured intermittently on all four sides using 1–2 stitches. (6) A rubber strip should be placed in the center of the small hole. Results: The presence of a small hole in the center of the incision and the use of a rubber strip for drainage facilitate early fluid drainage. The design of a cross-stitched skin incision helps reduce local tension. Conclusion: The modified cross-suture technique may reduce postoperative incision infections and associated pain, which is a suitable incision treatment method for loop stoma reversal.

Abstract Solid‐state electrolytes are critical for the development of next‐generation high‐energy and high‐safety rechargeable batteries. Among all the candidates, sodium (Na) superionic conductors (NASICONs) are highly promising because of their evident advantages in high ionic conductivity and high chemical/electrochemical stability. The concept of NASICONs was proposed by Hong and Goodenough et al. in 1976 by reporting the synthesis and characterization of Na1+xZr2(SixP3−x)O12 (0 ≤ x ≤ 3), which has attracted tremendous attention on the NASICONs‐type solid‐state electrolytes. In this review, we are committed to describing the development history of NASICONs‐type solid‐state electrolytes and elucidating the contribution of Goodenough as a tribute to him. We summarize the correlations and differences between lithium‐based and sodium‐based NASICONs electrolytes, such as their preparation methods, structures, ionic conductivities, and the mechanisms of ion transportation. Critical challenges of NASICONs‐structured electrolytes are discussed, and several research directions are proposed to tackle the obstacles toward practical applications.

Although extensive studies have investigated changes in regional ecosystem services (ESs) under rapid urbanization, few analyses have used high-resolution image data to investigate urban wetlands. Taking the Xixi wetland region as a case area, this study aimed to investigate the temporal and spatial variation and influencing factors of typical ESs during 1984–2018 using high-resolution images. The results showed that the Xixi wetland region underwent substantial changes of land use as well as in different ESs. While carbon storage presented an increasing trend from 223.25 t/ha to 368.11 t/ha from 1984 to 2018, the changes of other services illustrated an overall degradation in this important urban wetland. Evident trade-off and synergy effects were observed between water yield and carbon storage and between biodiversity protection and recreation and cultural services. Redundancy analysis revealed the detrimental impacts of impervious cover on the provision of ESs in this urban wetland area. The results obtained in this study highlight the great challenges that urban wetland parks face in balancing wetland conservation and sustainable use.

Maritime accidents, such as ship collisions and oil spills, directly affect maritime transportation, pollute the water environment, and indirectly threaten life and property safety. Predicting the maritime accident susceptibility and taking measures in advance can effectively avoid the accident probability and reduce the risk. Therefore, this study established dynamic multi-period (monthly, yearly, and five-yearly) maritime accident prediction models based on the random forest (RF) algorithm and Automatic Identification System (AIS) data for susceptibility assessment. First, based on historical maritime accidents and influencing factor data, we generated the feature matrixes and selected the conditioning factors using the Pearson correlation coefficient. Then, we constructed the accident susceptibility models using the RF method and evaluated the model performances based on the accuracy, recall, precision, F1-measure, ROC, and AUC values. Finally, we developed accident susceptibility maps for different period scales. The results show that the monthly, yearly, and five-yearly models performed well according to the validation values. And the three-period susceptibility maps show similar patterns. The high-susceptibility areas are close to the shore, especially from the Shanghai shore to the Guangxi shore. In addition, the ship density and bathymetry are the most critical factors among the ten influencing factors in the three models, contributing around 25% and 20% of the total information. These models and maps can provide technological support for maritime accident susceptibility assessment on a multi-period scale, which can be helpful for route planning and resource allocation in marine management.

Food, energy and water (FEW) are indispensable, irreplaceable and safeguarding resources with tangled interlinkages among each other, often framed in terms of ‘nexus’. Cities have become the bustling hubs of resource consumption and production, facing the most intense stress. Globally, food security, fresh water shortage and fossil energy exhaustion have become the greatest challenge for the sustainable development of cities in the future. Systematic analysis and simulation of dynamic evolution of urban FEW demand and supply and its nexus would add significant and practical value for macro-management such as ensuring the security of urban resource. Taking Beijing as the case study, we established a dynamic model for the FEW demand and supply from the perspective of cross-ectoral and cross-regional nexus with the Stella modelling platform, then it was run for simulating the dynamic changes and nexus characteristics of FEW during the interval between 2016 and 2035.The results showed that:①The gap between local production and demand of these three resources in Beijing will continue to increase. In 2035, Beijing will need 2.16 million tons of grain, 0.83 million tons of meat, 4.6 billion m3 of water and 91.65 million tons of standard coal of energy while the resources produced and supplied by locality independently will be 0.21 million tons, 0.23 million tons, 3.3 billion cubic meters and 16.5 million tons of standard coal respectively. Beijing has to draw on cross-boundary production to meet FEW-use with the increasing gap between local supply and demand. ②There is a developing trend of the absolute quantity of interaction among FEW. Structurally, the ‘outsourcing’ feature is obvious and the indigenous nexus links of three resources are shifting to back-end supply chain such as transportation and treatment. ③The change of nexus indexes are mainly affected by the mutual and strong dependence between food and water. Food and energy depend more and more on each other; in contrast, the inter-relationship between water and energy is more stable. In addition, inter-regional FEW nexus is strengthened. ④To improve systematic management of urban resources, we need to capture multi-tradeoffs of the FEW system comprehensively and establish a multi-regional and multi-factor integrated and collaborative resource management mechanism.

In recent decades, the influence of climate change and human activities on the ecosystem services (ES) in the Qinghai–Tibet Plateau (QTP) has been extensively investigated. However, few studies focus on linear traffic corridor area, which is heavily affected by human activities. Taking the Golmud–Lhasa national highway corridor as a case, this study investigated the land-use and land-cover change (LUCC) and spatiotemporal variations of ES indicators using ecosystem indices of fractional vegetation cover (FVC), leaf area index (LAI), evapotranspiration (ET), and net primary productivity (NPP) from 2000 to 2020. The results indicated that LUCC was faster in the last decade, mostly characterized by the conversion from grassland to unused land. In buffer within 3000 m, the proportions of productive areas represented the increased trends with distance. In terms of ES variations, the improved areas outweighed the degraded areas in terms of FVC, LAI, and NPP from 2000 to 2020, mostly positioned in the Qinghai Province. In addition, FVC, LAI, and NPP peaked at approximately 6000 m over time. With regard to influencing factors, precipitation (20.54%) and temperature (14.19%) both positively influenced the spatiotemporal variation of FVC. Nearly 60% of the area exhibited an increased NPP over time, especially in the Qinghai Province, which could be attributed to the temperature increase over the last two decades. In addition, the distance effects of climatic factors on ES indicators exhibited that the coincident effects almost showed an opposite trend, while the reverse effects showed a similar trend. The findings of this study could provide a reference for the ecological recovery of traffic corridors in alpine fragile areas.

Abstract Location-based services are becoming more and more popular in mobile online social networks (mOSNs) for smart cities, but users’ privacy also has aroused widespread concern, such as locations, friend sets and other private information. At present, many protocols have been proposed, but these protocols are inefficient and ignore some security risks. In the paper, we present a new location-sharing protocol, which solves two issues by using symmetric/asymmetric encryption properly. We adopt the following methods to reduce the communication and computation costs: only setting up one location server; connecting social network server and location server directly instead of through cellular towers; avoiding broadcast encryption. We introduce dummy identities to protect users’ identity privacy, and prevent location server from inferring users’ activity tracks by updating dummy identities in time. The details of security and performance analysis with related protocols show that our protocol enjoys two advantages: (1) it’s more efficient than related protocols, which greatly reduces the computation and communication costs; (2) it satisfies all security goals; however, most previous protocols only meet some security goals.

Micro-image strain sensing (MISS) is an innovative technology to measure strain within a measurement range of ±8300 microstrains. It has been proved to be effective and satisfy all requirements in the field of structural health monitoring. However, there is still room for improvement and extend the range of measurement. In this paper, an improved method is proposed to increase the measurement range of strain and displacement. Moreover, various tests were conducted to verify the efficiency of the improved method. The results showed that the modified method is efficient and accurate and can be readily used to extend the measurement range of both strain and displacement. This research will likely help stimulate the development of multifunctional sensors to obtain abundant useful information about structures in the field of structural health monitoring. It will allow measuring strain and displacement, which require different levels of accuracy, using one unified sensor.

Thirty years ago, the systems ecologist Howard T. Odum introduced the concept of transformity, which is a thermodynamic measure of quality within the trial and error evolutionary dynamics of ecosystems, namely an indicator of rank in the hierarchical system structure of the biosphere. Based on a global database of individual processes and whole economies, this paper extends, refines, and updates Odum's idea, demonstrating the strength of the postulated relation. In particular, an inverse linear logarithmic relationship is shown to hold between resource quantity (exergy) and quality (emergy), which is the result of an overall energetic efficiency characteristic of energy transformation processes of the biosphere. This relation extends from natural renewable energy sources to human information (including global internet data flows) and know-how embedded in national economies, thus identifying a consistent theory of hierarchical organization of the biosphere grounded in energetics and ultimately setting constraints to illusions of unlimited growth.

The physical barrier is composed of epithelial cells which are joined together through intercellular connections. It serves to prevent pathogenic microorganisms from departing the intestinal lumen to invade the host. The excretory secretory (ES) products of Trichinella spiralis are critical for invasion. However, whether ES products of T. spiralis can act on the intestinal barrier is still unknown. In this study, the role of ES products of T. spiralis muscle larvae (Ts-ML-ES) in host invasion was studied by establishing an in vitro cell monolayers model. Barrier integrity analysis by a transmembrane resistance test and a paracellular permeability assay revealed that the Ts-ML-ES was able to destroy barrier function. It occurred via a reduction in the expression of tight junction (TJ) proteins, which was induced by serine protease. Furthermore, Western bolt analysis indicated that Ts-ML-ES reduced the expression of TJ proteins via the MAPK signaling pathway. Based on these data, we conclude that serine protease are likely the main factors from Ts-ML-ES that affect host intestinal barrier integrity by reducing the expression of TJs via the P38-MAPK signaling pathway. Serine protease in Ts-ML-ES might be a key invasion factor in T. spiralis.

Soybean is grown worldwide for oil and protein source as food, feed and industrial raw material for biofuel. Steady increase in soybean production in the past century mainly attributes to genetic mediation including hybridization, mutagenesis and transgenesis. However, genetic resource limitation and intricate social issues in use of transgenic technology impede soybean improvement to meet rapid increases in global demand for soybean products. New approaches in genomics and development of site-specific nucleases (SSNs) based genome editing technologies have expanded soybean genetic variations in its germplasm and have potential to make precise modification of genes controlling the important agronomic traits in an elite background. ZFNs, TALENS and CRISPR/Cas9 have been adapted in soybean improvement for targeted deletions, additions, replacements and corrections in the genome. The availability of reference genome assembly and genomic resources increases feasibility in using current genome editing technologies and their new development. This review summarizes the status of genome editing in soybean improvement and future directions in this field.

There is an urgent need for the development of new, improved vaccine adjuvants against T. spiralis infection. Polysaccharides are effective, safe, and biodegradable as adjuvant. In our study, we first observed the protective efficacy of lentinan as adjuvant against helminth T. spiralis infection. Recombinant T. spiralis Serpin (rTs-Serpin) immunoscreened from a cDNA library of T. spiralis, as a vaccine, protect host against Trichinella infection. The reduction rate of helminth burden of rTs-Serpin+lentinan-immunized mice was significantly increased compared with rTs-Serpin+FCA -immunized mice. rTs-Serpin+lentinan induced IgG1-dominant immune response and higher levels of IFN-γ and IL-4. rTs-Serpin+lentinan displayed a lower reduction rate of parasite burden in NLRP3-/- mice than that in WT mice and lower level of IgG1 than that in WT mice. The level of IL-4, but not IFN-γ, from NLRP3-/- mice immunized by rTs-Serpin+lentinan was significantly lower than that from WT mice, suggesting that NLRP3 is associated with rTs-Serpin+lentinan -triggering Th2 protective immunity against T. spiralis infection. In summary, we revealed that lentinan was a novel adjuvant against T. spiralis infection via NLRP3. NLRP3 therefore represents an important target for adjuvant discovery and the control of T. spiralis infection.

Strain is one of the key concerns of structural health monitoring (SHM), and effective measurement of structural strain is very important for structural health condition assessment. The purpose of this paper is to investigate the application of the micro image strain sensing (MISS) sensor based on smartphone and microscope for measuring strain parameters of structural members. Firstly, metal tensile tests were performed to verify the effectiveness of the MISS sensor, and the strain results measured by the fiber Bragg grating (FBG) sensor and the MISS sensor were compared. The results showed that the mean error between the MISS and FBG sensor measured results is 7.1 με in the metal tensile test. Then, a concrete beam bending test was carried out; the mean relative error of strain values between the FBG sensor and the MISS sensor is 2.5%. Overall, the strain measurements of the MISS sensor matched well with those from the FBG sensor in each experiment. This study validates the reliability and accuracy of the MISS sensor for strain detection and the MISS sensors can play a more powerful role in SHM due to their robustness, simplicity, and low cost.

Hyperhomocysteinemia (HHcy) is an independent risk factor for cardiovascular disease (CVD) which has been implicated in matochondrial (Mt) function impairment. In this study, we characterized Hcy metabolism in mouse tissues by using LC-ESI-MS/MS analysis, established tissue expression profiles for 84 nuclear-encoded Mt electron transport chain complex (nMt-ETC-Com) genes in 20 human and 19 mouse tissues by database mining, and modeled the effect of HHcy on Mt-ETC function. Hcy levels were high in mouse kidney/lung/spleen/liver (24–14 nmol/g tissue) but low in brain/heart (~5 nmol/g). S-adenosylhomocysteine (SAH) levels were high in the liver/kidney (59–33 nmol/g), moderate in lung/heart/brain (7–4 nmol/g) and low in spleen (1 nmol/g). S-adenosylmethionine (SAM) was comparable in all tissues (42–18 nmol/g). SAM/SAH ratio was as high as 25.6 in the spleen but much lower in the heart/lung/brain/kidney/liver (7–0.6). The nMt-ETC-Com genes were highly expressed in muscle/pituitary gland/heart/BM in humans and in lymph node/heart/pancreas/brain in mice. We identified 15 Hcy-suppressive nMt-ETC-Com genes whose mRNA levels were negatively correlated with tissue Hcy levels, including 11 complex-I, one complex-IV and two complex-V genes. Among the 11 Hcy-suppressive complex-I genes, 4 are complex-I core subunits. Based on the pattern of tissue expression of these genes, we classified tissues into three tiers (high/mid/low-Hcy responsive), and defined heart/eye/pancreas/brain/kidney/liver/testis/embryonic tissues as tier 1 (high-Hcy responsive) tissues in both human and mice. Furthermore, through extensive literature mining, we found that most of the Hcy-suppressive nMt-ETC-Com genes were suppressed in HHcy conditions and related with Mt complex assembly/activity impairment in human disease and experimental models. We hypothesize that HHcy inhibits Mt complex I gene expression leading to Mt dysfunction. Keywords: Database mining, Tissue expression profile, Homocysteine metabolism

Dehydrins, also known as Group II late embryogenesis abundant (LEA) proteins, are classic intrinsically disordered proteins, which have high hydrophilicity. A wide range of hostile environmental conditions including low temperature, drought, and high salinity stimulate dehydrin expression. Numerous studies have furnished evidence for the protective role played by dehydrins in plants exposed to abiotic stress. Furthermore, dehydrins play important roles in seed maturation and plant stress tolerance. Hence, dehydrins might also protect plasma membranes and proteins and stabilize DNA conformations. In the present review, we discuss the regulatory networks of dehydrin gene expression including the abscisic acid (ABA), mitogen-activated protein (MAP) kinase cascade, and Ca2+ signaling pathways. Crosstalk among these molecules and pathways may form a complex, diverse regulatory network, which may be implicated in regulating the same dehydrin.

Accumulated evidence strongly indicates that oxidative stress, characterized by an imbalance between reactive oxygen species (ROS) production and antioxidants in favor of oxidants, plays an important role in disease pathogenesis. However, ROS can act as signaling molecules and fulfill essential physiological functions at basal levels. Each ROS would be different in the extent to stimulate and contribute to different pathophysiological effects. Importantly, multiple ROS generators can be activated either concomitantly or sequentially by relevant signaling molecules for redox biological functions. Here, we summarized the current knowledge related to chemical and biochemical features of primary ROS species and corresponding antioxidants. Metabolic pathways of five major ROS generators and five ROS clearance systems were described, including their ROS products, specific ROS enriched tissue, cell and organelle, and relevant functional implications. We provided an overview of ROS generation and induction at different levels of metabolism. We classified 11 ROS species into three types based on their reactivity and target selectivity and presented ROS homeostasis and functional implications in pathological and physiological status. This article intensively reviewed and refined biochemical basis, metabolic signaling and regulation, functional insights, and provided guidance for the identification of novel therapeutic targets. Keywords: Redox regulation and homeostasis, ROS generators, Antioxidants

The Chinese government has taken great efforts to popularize rural household scale biogas digesters, since they are regarded as an effective approach to address energy shortage issues in rural areas and as a potential way of reducing greenhouse gas (GHG) emissions. Focusing on a typical rural household biogas system, the aim of this study is to systematically quantify its total direct and indirect energy, concentrating on non-renewable energy and the associated GHG emission cost over the entire life cycle to understand its net dynamic benefits. The results show that the total energetic cost for biogas output is 2.19 J/J, of which 0.56 J is from non-renewable energy sources and the GHG emission cost is 4.54 × 10−5 g CO2-equivalent (CO2-eq), with respect to its design life cycle of 20 years. Correspondingly, a net non-renewable energy saving of 9.89 × 1010 J and GHG emission reduction of 50.45 t CO2-eq can be obtained considering the coal substitution and manure disposal. However, it must be run for at least 10 and 3 years, to obtain positive net non-renewable energy savings and GHG emission reduction benefits, respectively. These results have policy implications for development orientation, follow-up services, program management and even national financial subsidy methods.

Waste management is a distinct practice aimed at reducing its effects on health and the environment and increasing energy and material recovery. The urban waste management industry has been slow to adopt new technologies, such as sanitary landfills and incineration, which enable better treatment results. The aim of a thorough ecological-economic evaluation of different treatment technologies is to extract the maximum practical benefits from investments and to ensure the minimum environmental impacts of wastes. This paper compares four garbage treatment systems, including sanitary landfills systems, fluidized bed incineration system, grate type incineration system and the current landfills system in Liaoning Province, China. By considering the economic and environmental impacts of waste treatment and disposal, impact of emissions, and contribution of wastes input, this paper constructed an emergy-based urban solid waste model for evaluating the sustainability of the holistic systems. The results in Liaoning indicate that the human health losses caused by the harmful air emissions are ranked in this order: fluidized bed incineration > grate type incineration > current landfills > sanitary landfills, while the ecosystem losses are ranked: grate type incineration > fluidized bed incineration > sanitary landfills > current landfills. The electricity yield ratios are ranked: grate type incineration > fluidized bed incineration > sanitary landfills > current landfills. Taken together this suggests that in considering the incineration option, decision makers must weigh the benefits of incineration against the significant operating costs, potential environmental impacts, and technical difficulties of operating. Emergy analysis of the urban solid treatment systems can provide a set of useful tools which can be used to compare the comprehensive performances of different waste treatment processes for decision-making and optimizing the whole process.

Urban ecosystem health assessments can be applied extensively in urban management to evaluate the status quo of the urban ecosystem, identify the limiting factors, identify key problems, optimize the scheme and guide ecological regulation. Regarding the multi-layer roles of urban ecosystems, urban ecosystem health should be assessed at different scales with each assessment providing a specific reference to urban management from its own viewpoint. Therefore, a novel framework of multi-scale urban ecosystem health assessment is established on global, national, regional and local scales. A demonstration of the framework is shown by using a case study in Guangzhou City, China, where urban ecosystem health assessment is conducted in the order of global, national, regional, and local scales, from macro to micro, and rough to detailed analysis. The new multi-scale framework can be utilized to generate a more comprehensive understanding of urban ecosystem health, more accurate orientation of urban development, and more feasible regulation and management programs when compared with the traditional urban ecosystem health assessment focusing at the local scale.

Small-scale bio-energy projects have been launched in rural areas of China and are considered as alternatives to fossil-fuel energy. However, energetic and environmental evaluation of these projects has rarely been carried out, though it is necessary for their long-term development. A village-level biomass gasification project provides an example. A hybrid life-cycle assessment (LCA) of its total nonrenewable energy (NE) cost and associated greenhouse gas (GHG) emissions is presented in this paper. The results show that the total energy cost for one joule of biomass gas output from the project is 2.93 J, of which 0.89 J is from nonrenewable energy, and the related GHG emission cost is 1.17 × 10−4 g CO2-eq over its designed life cycle of 20 years. To provide equivalent effective calorific value for cooking work, the utilization of one joule of biomass gas will lead to more life cycle NE cost by 0.07 J and more GHG emissions by 8.92 × 10−5 g CO2-eq compared to natural gas taking into consideration of the difference in combustion efficiency and calorific value. The small-scale bio-energy project has fallen into dilemma, i.e., struggling for survival, and for a more successful future development of village-level gasification projects, much effort is needed to tide over the plight of its development, such as high cost and low efficiency caused by decentralized construction, technical shortcomings and low utilization rate of by-products.

The establishment of low-carbon cities has been suggested all over the World, since cities are key drivers of energy usage and the associated carbon emissions. This paper presents a scenario analysis of future energy consumption and carbon emissions for the city of Beijing. The Long-range Energy Alternatives Planning (LEAP) model is used to simulate a range of pathways and to analyze how these would change energy consumption and carbon emissions from 2007 to 2030. Three scenarios have been designed to describe future energy strategies in relation to the development of Beijing city, namely a reference scenario (RS), control scenario (CS), and integrated scenario (IS). The results show that under the IS the total energy demand in Beijing is expected to reach 88.61 million tonnes coal equivalent (Mtce) by 2030 (59.32 Mtce in 2007), 55.82% and 32.72% lower than the values under the RS and the CS, respectively. The total carbon emissions in 2030 under the IS, although higher than the 2007 level, will be 62.22% and 40.27% lower than under the RS and the CS, respectively, with emissions peaking in 2026 and declining afterwards. In terms of the potential for reduction of energy consumption and carbon emissions, the industrial sector will continue to act as the largest contributor under the IS and CS compared with the RS, while the building and transport sectors are identified as promising fields for achieving effective control of energy consumption and carbon emissions over the next two decades. The calculation results show that an integrated package of measures is the most effective in terms of energy savings and carbon emissions mitigation, although it also faces the largest challenge to achieve the related targets.

The development of the complex and multi-dimensional urban socio-economic system creates impacts on natural capital and human capital, which range from a local to a global scale. An emergy-based multiple spatial scale analysis framework and a rigorous accounting method that can quantify the values of human-made and natural capital losses were proposed in this study. With the intent of comparing the trajectory of Beijing over time, the characteristics of the interface between different scales are considered to explain the resource trade and the impacts of emissions. In addition, our improved determination of emergy analysis and acceptable management options that are in agreement with Beijing’s overall sustainability strategy were examined. The results showed that Beijing’s economy was closely correlated with the consumption of nonrenewable resources and exerted rising pressure on the environment. Of the total emergy use by the economic system, the imported nonrenewable resources from other provinces contribute the most, and the multi‑scale environmental impacts of waterborne and airborne pollution continued to increase from 1999 to 2006. Given the inputs structure, Beijing was chiefly making greater profits by shifting resources from other provinces in China and transferring the emissions outside. The results of our study should enable urban policy planners to better understand the multi-scale policy planning and development design of an urban ecological economic system.

With support of GIS tools and Theil index, the spatial variance of urban energy consumption in China was discussed in this paper through the parallel comparison and quantitative analysis of the 30 provincial capital cities of mainland China in 2005, in terms of scale, efficiency and structure. The indicators associated with urban energy consumption show large spatial variance across regions, possibly due to diversities of geographic features, economic development levels and local energy source availability in China. In absolute terms, cities with the highest total energy consumption are mostly distributed in economic-developed regions as Beijing-Tianjin-Tangshan Area, Yangtze River Delta and Pearl River Delta of China, however, the per capita urban energy use is significantly higher in the Mid-and-Western regions. With regard to the energy mix, coal still plays the dominant role and cities in Mid-and-Western regions rely more on coal. In contrast, high quality energy carrier as electricity and oils are more used in southeast coastal zone and northern developed areas. The energy intensive cities are mainly located in the northwest, while the cities with higher efficiency are in southeast areas. The large spatial variance of urban energy consumption was also verified by the Theil indices. Considering the Chinese economy-zones of East, Middle and West, the within-group inequalities are the main factor contributing to overall difference, e.g., the Theil index for per capita energy consumption of within-group is 0.18, much higher than that of between group (0.07), and the same applies to other indicators. In light of the spatial variance of urban energy consumptions in China, therefore, regionalized and type-based management of urban energy systems is badly needed to effectively address the ongoing energy strategies and targets.

Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making.

Beijing has experienced rapid urbanization and associated urban heat island (UHI) effects. This study aimed at analyzing the impact of urban form on UHI in Beijing using TM/ETM images between 1989 and 2010. Spatial analysis was proposed to explore the relationships between area, compactness ratio, the gravity centers of urban land, and UHI. The UHI in Beijing spatially represented a “NE-SW” spindle. The land surface temperature (LST) was higher in south than in north. Urban Heat Island Ratio Index (URI) was well interrelated with urban land area in different zones. Under the similar urban land area condition, UHI and compactness ratio of urban land were in positive correlation. The moving direction of the UHI gravity center was basically in agreement with urban land sprawl. The encroachment of urban land on suburban land is the leading source of UHI effect. The results suggest that urban design based on urban form would be effective for regulating the thermal environment.

Water, energy, and food are lifelines for modern societies. The continuously rising world population, growing desires for higher living standards, and inextricable links among the three sectors make the water-energy-food (WEF) nexus a vibrant research pursuit. For the integrated delivery of WEF systems, quantifying WEF connections helps understand synergies and trade-offs across the water, energy, and food sectors, and thus is a critical initial step toward integrated WEF nexus modeling and management. However, current WEF interconnection quantifications encounter methodological hurdles. Also, existing calculation results are scattered across a wide collection of studies in multiple disciplines, which increases data collection and interpretation difficulties. To advance robust WEF nexus quantifications and further contribute to integrated WEF systems modeling and management, this study: (i) summarizes the estimate results to date on WEF interconnections; (ii) analyzes methodological and practical challenges associated with WEF interconnection calculations; and (iii) points out opportunities for enabling robust WEF nexus quantifications in the future.

The rapid urbanization witnessed in recent years has led to the deterioration of urban ecosystems, resulting in various environmental and socioeconomic challenges. In response to these concerns, the implementation of Green and Blue Infrastructures (GBI) has gained prominence as a sustainable urban planning approach. GBI is a planned network system of natural and semi-natural spaces, along with other environmental elements, managed and designed to provide a wide range of ecosystem services and improve ecological conditions, thereby contributing to citizens' wellbeing and quality of life. This study presents a comprehensive assessment of the costs, benefits (ecosystem services), and impacts (ecosystem dis-services) associated with the incorporation of GBI in urban environments using the technique of emergy accounting. To achieve this, the research paper introduces a novel integrated valuation framework. This framework encompasses key components such as constructing/maintenance costs, ecosystem services, needed costs to human health and biodiversity damage, as well as ecosystem dis-services. Furthermore, the study conducts a comparative analysis of the costs, benefits, and impacts associated with different urban GBIs via ternary phase diagram, shedding light on their varying contributions to the urban ecosystem. The findings reveal that green roofs offer more ecosystem benefits as compared to other GBIs, but this study also highlights that green roof entail higher initial construction costs and produce a greater number of dis-services. Conversely, street trees have lower initial costs and impacts yet generate higher benefits. Furthermore, green walls, despite having a lower input emergy value and fewer benefits, result in higher impacts compared to other green-blue ecosystems. These findings provide valuable insights for urban planners, policymakers, and stakeholders, enabling them to make informed decisions in developing sustainable cities for the wellbeing of present and future generations. [ABSTRACT FROM AUTHOR]