Search

Large language models (LLMs) show impressive performance in solving complex language tasks. However, its large number of parameters present significant challenges for the deployment and application of the model on edge devices. Compressing large language models to low bits can enable them to run on resource-constrained devices, often leading to performance degradation. To address this problem, we propose gradient-aware weight quantization (GWQ), the first quantization approach for low-bit weight quantization that leverages gradients to localize outliers, requiring only a minimal amount of calibration data for outlier detection. GWQ retains the weights corresponding to the top 1% outliers preferentially at FP16 precision, while the remaining non-outlier weights are stored in a low-bit format. GWQ found experimentally that utilizing the sensitive weights in the gradient localization model is more scientific compared to utilizing the sensitive weights in the Hessian matrix localization model. Compared to current quantization methods, GWQ can be applied to multiple language models and achieves lower PPL on the WikiText2 and C4 dataset. In the zero-shot task, GWQ quantized models have higher accuracy compared to other quantization methods. GWQ is also suitable for multimodal model quantization, and the quantized Qwen-VL family model is more accurate than other methods. Zero-shot target detection task dataset RefCOCO outperforms the current stat-of-the-arts method SPQR. GWQ achieves 1.2 times inference speedup in comparison to the original model, and effectively reduces the inference memory.

We present TANGO, a framework for generating co-speech body-gesture videos. Given a few-minute, single-speaker reference video and target speech audio, TANGO produces high-fidelity videos with synchronized body gestures. TANGO builds on Gesture Video Reenactment (GVR), which splits and retrieves video clips using a directed graph structure - representing video frames as nodes and valid transitions as edges. We address two key limitations of GVR: audio-motion misalignment and visual artifacts in GAN-generated transition frames. In particular, (i) we propose retrieving gestures using latent feature distance to improve cross-modal alignment. To ensure the latent features could effectively model the relationship between speech audio and gesture motion, we implement a hierarchical joint embedding space (AuMoCLIP); (ii) we introduce the diffusion-based model to generate high-quality transition frames. Our diffusion model, Appearance Consistent Interpolation (ACInterp), is built upon AnimateAnyone and includes a reference motion module and homography background flow to preserve appearance consistency between generated and reference videos. By integrating these components into the graph-based retrieval framework, TANGO reliably produces realistic, audio-synchronized videos and outperforms all existing generative and retrieval methods. Our codes and pretrained models are available: \url{https://pantomatrix.github.io/TANGO/}, Comment: 16 pages, 8 figures

Code smells indicate the potential problems of software quality so that developers can identify refactoring opportunities by detecting code smells. State-of-the-art approaches leverage heuristics, machine learning, and deep learning to detect code smells. However, existing approaches have not fully explored the potential of large language models (LLMs). In this paper, we propose \textit{PromptSmell}, a novel approach based on prompt learning for detecting multi-label code smell. Firstly, code snippets are acquired by traversing abstract syntax trees. Combined code snippets with natural language prompts and mask tokens, \textit{PromptSmell} constructs the input of LLMs. Secondly, to detect multi-label code smell, we leverage a label combination approach by converting a multi-label problem into a multi-classification problem. A customized answer space is added to the word list of pre-trained language models, and the probability distribution of intermediate answers is obtained by predicting the words at the mask positions. Finally, the intermediate answers are mapped to the target class labels by a verbalizer as the final classification result. We evaluate the effectiveness of \textit{PromptSmell} by answering six research questions. The experimental results demonstrate that \textit{PromptSmell} obtains an improvement of 11.17\% in $precision_{w}$ and 7.4\% in $F1_{w}$ compared to existing approaches.

Traffic flow prediction plays a crucial role in alleviating traffic congestion and enhancing transport efficiency. While combining graph convolution networks with recurrent neural networks for spatial-temporal modeling is a common strategy in this realm, the restricted structure of recurrent neural networks limits their ability to capture global information. For spatial modeling, many prior studies learn a graph structure that is assumed to be fixed and uniform at all time steps, which may not be true. This paper introduces a novel traffic prediction framework, Global-Aware Enhanced Spatial-Temporal Graph Recurrent Network (GA-STGRN), comprising two core components: a spatial-temporal graph recurrent neural network and a global awareness layer. Within this framework, three innovative prediction models are formulated. A sequence-aware graph neural network is proposed and integrated into the Gated Recurrent Unit (GRU) to learn non-fixed graphs at different time steps and capture local temporal relationships. To enhance the model's global perception, three distinct global spatial-temporal transformer-like architectures (GST^2) are devised for the global awareness layer. We conduct extensive experiments on four real traffic datasets and the results demonstrate the superiority of our framework and the three concrete models.

We propose EMAGE, a framework to generate full-body human gestures from audio and masked gestures, encompassing facial, local body, hands, and global movements. To achieve this, we first introduce BEAT2 (BEAT-SMPLX-FLAME), a new mesh-level holistic co-speech dataset. BEAT2 combines a MoShed SMPL-X body with FLAME head parameters and further refines the modeling of head, neck, and finger movements, offering a community-standardized, high-quality 3D motion captured dataset. EMAGE leverages masked body gesture priors during training to boost inference performance. It involves a Masked Audio Gesture Transformer, facilitating joint training on audio-to-gesture generation and masked gesture reconstruction to effectively encode audio and body gesture hints. Encoded body hints from masked gestures are then separately employed to generate facial and body movements. Moreover, EMAGE adaptively merges speech features from the audio's rhythm and content and utilizes four compositional VQ-VAEs to enhance the results' fidelity and diversity. Experiments demonstrate that EMAGE generates holistic gestures with state-of-the-art performance and is flexible in accepting predefined spatial-temporal gesture inputs, generating complete, audio-synchronized results. Our code and dataset are available https://pantomatrix.github.io/EMAGE/, Comment: Fix typos; Conflict of Interest Disclosure; CVPR Camera Ready; Project Page: https://pantomatrix.github.io/EMAGE/

We propose a new type of high temperature superconducting (HTS) conductor concept: modularized conductors (MC) connected by Chinese traditional tenon mortise (TM) connection structure, reffered as TMMC. The conductor consists of multiple concentric round sub conductors with slots for stacking REBCO tapes. Innovatively, the REBCO stacks in the adjacent sub conductors are arranged with the fully misaligned configuration to enhance the critical current' s isotropy with respect to magnetic field and reduce ac loss. For example, the angle between the adjacent stacks in the two adjacent sub conductors is 45 degree if each subconductor contains 4 REBCO stacks. In order to construct the fully misaligned configuration, the sub conductors are designed with two open half circular formers and connected by tenonmortise structure which makes the conductor modulrized and simply to assembly and disassembly. Based on the design concept, a prototype conductor containing 160 REBCO tapes distributed in the four concentric sub conductors is fabricated. The conductor measured critical current is 13.69 kA at 77 K and sefl field, which is consistent to the simulaiton result. In order to further improve the TMMC' s engineering critical current density (Jce) and bending performance, we propose two enhancement approaches which are reducing the former' s thickness and rearrange stacks in the outer sub conductors. With the enhancements, both TMMC' s radius and Jce are comparable to the existing slotted core conductor. The study shows the TMMC' s advantages of nontwisted structures, easy assembly, high current carrying and low ac losses, which makes it promising for constructing large scale scientific devices.

Systematic optimization over a wide power range is often achieved through the combination of modules of different power levels. This paper addresses the issue of enhancing the efficiency of a multiple module system connected in parallel during operation and proposes an algorithm based on equal incremental cost for dynamic load allocation. Initially, a polynomial fitting technique is employed to fit efficiency test points for individual modules. Subsequently, the equal incremental cost-based optimization is utilized to formulate an efficiency optimization and allocation scheme for the multi-module system. A simulated annealing algorithm is applied to determine the optimal power output strategy for each module at given total power flow requirement. Finally, a dual active bridge (DAB) experimental prototype with two input-parallel-output-parallel (IPOP) configurations is constructed to validate the effectiveness of the proposed strategy. Experimental results demonstrate that under the 800W operating condition, the approach in this paper achieves an efficiency improvement of over 0.74\% by comparison with equal power sharing between both modules.

Traffic flow prediction is one of the most fundamental tasks of intelligent transportation systems. The complex and dynamic spatial-temporal dependencies make the traffic flow prediction quite challenging. Although existing spatial-temporal graph neural networks hold prominent, they often encounter challenges such as (1) ignoring the fixed graph that limits the predictive performance of the model, (2) insufficiently capturing complex spatial-temporal dependencies simultaneously, and (3) lacking attention to spatial-temporal information at different time lengths. In this paper, we propose a Multi-Scale Spatial-Temporal Recurrent Network for traffic flow prediction, namely MSSTRN, which consists of two different recurrent neural networks: the single-step gate recurrent unit and the multi-step gate recurrent unit to fully capture the complex spatial-temporal information in the traffic data under different time windows. Moreover, we propose a spatial-temporal synchronous attention mechanism that integrates adaptive position graph convolutions into the self-attention mechanism to achieve synchronous capture of spatial-temporal dependencies. We conducted extensive experiments on four real traffic datasets and demonstrated that our model achieves the best prediction accuracy with non-trivial margins compared to all the twenty baseline methods.

The immutable and trustable characteristics of blockchain enable smart contracts to be applied in various fields. Unfortunately, smart contracts are subject to various vulnerabilities, which are frequently exploited by attackers, causing financial damage to users.In this paper, we study the problem of vulnerable smart contract function locating. We construct a novel Multi-Relational Nested contract Graph (MRNG) to better characterize the rich syntactic and semantic information in the smart contract code, including the relationships between data and instructions. An MRNG represents a smart contract, where each node represents a function in the smart contract and each edge describes the calling relationship between the functions. In addition, we create a Multi-Relational Function Graph (MRFG) for each function, which characterizes the corresponding function code. That is, each function is characterized as an MRFG, which corresponds to a node in the MRNG. Each MRFG uses different types of edges to represent the different control and data relationships between nodes within a function. We also propose a Multi-Relational Nested Graph Convolutional Network (MRN-GCN) to process the MRNG. MRN-GCN first extracts and aggregates features from each MRFG, using the edge-enhanced graph convolution network and self-attention mechanism. The extracted feature vector is then assigned to the corresponding node in the MRNG to obtain a new Featured Contract Graph (FCG) for the smart contract. Graph convolution is used to further extract features from the FCG. Finally, a feed forward network with a Sigmoid function is used to locate the vulnerable functions. Experimental results on the real-world smart contract datasets show that model MRN-GCN can effectively improve the accuracy, precision, recall and F1-score performance of vulnerable smart contract function locating., Comment: Accepted By Jssoftware On JUNE 6, 2023

Although both self-supervised single-frame and multi-frame depth estimation methods only require unlabeled monocular videos for training, the information they leverage varies because single-frame methods mainly rely on appearance-based features while multi-frame methods focus on geometric cues. Considering the complementary information of single-frame and multi-frame methods, some works attempt to leverage single-frame depth to improve multi-frame depth. However, these methods can neither exploit the difference between single-frame depth and multi-frame depth to improve multi-frame depth nor leverage multi-frame depth to optimize single-frame depth models. To fully utilize the mutual influence between single-frame and multi-frame methods, we propose a novel self-supervised training framework. Specifically, we first introduce a pixel-wise adaptive depth sampling module guided by single-frame depth to train the multi-frame model. Then, we leverage the minimum reprojection based distillation loss to transfer the knowledge from the multi-frame depth network to the single-frame network to improve single-frame depth. Finally, we regard the improved single-frame depth as a prior to further boost the performance of multi-frame depth estimation. Experimental results on the KITTI and Cityscapes datasets show that our method outperforms existing approaches in the self-supervised monocular setting., Comment: Accepted for publication in the IEEE Robotics and Automation Letters (RA-L). 8 pages, 3figures

This paper considers the problems of scattering of time-harmonic acoustic waves by a two-layered medium with a non-locally perturbed boundary (called a rough boundary in this paper) in two dimensions, where a Dirichlet or impedance boundary condition is imposed on the boundary. The two-layered medium is composed of two unbounded media with different physical properties and the interface between the two media is considered to be a planar surface. We formulate the considered scattering problems as the boundary value problems and prove that each boundary value problem has a unique solution by utilizing the integral equation method associated with the two-layered Green function. Moreover, we develop the Nystr\"{o}m method for numerically solving the considered boundary value problems, based on the proposed integral equation formulations. We establish the convergence results of the Nystr\"{o}m method with the convergence rates depending on the smoothness of the rough boundary. It is worth noting that in establishing the well-posedness of the boundary value problems as well as the convergence results of the Nystr\"{o}m method, an essential role is played by the investigation of the asymptotic properties of the two-layered Green function for small and large arguments. Finally, numerical experiments are carried out to show the effectiveness of the Nystr\"{o}m method., Comment: 60 pages with 7 figures

Traffic forecasting is one of the most fundamental problems in transportation science and artificial intelligence. The key challenge is to effectively model complex spatial-temporal dependencies and correlations in modern traffic data. Existing methods, however, cannot accurately model both long-term and short-term temporal correlations simultaneously, limiting their expressive power on complex spatial-temporal patterns. In this paper, we propose a novel spatial-temporal neural network framework: Attention-based Spatial-Temporal Graph Convolutional Recurrent Network (ASTGCRN), which consists of a graph convolutional recurrent module (GCRN) and a global attention module. In particular, GCRN integrates gated recurrent units and adaptive graph convolutional networks for dynamically learning graph structures and capturing spatial dependencies and local temporal relationships. To effectively extract global temporal dependencies, we design a temporal attention layer and implement it as three independent modules based on multi-head self-attention, transformer, and informer respectively. Extensive experiments on five real traffic datasets have demonstrated the excellent predictive performance of all our three models with all their average MAE, RMSE and MAPE across the test datasets lower than the baseline methods.