Search

Metabolic syndrome (MetS) represents a cluster of diseases that includes diabetes and insulin resistance. A combination of these metabolic disorders damages liver function. We hypothesized here that histone deacetylase 1 (HDAC1) inhibits fibroblast growth factor 21 (FGF21) expression through histone deacetylation, thereby accentuating liver injury in rats with MetS. MetS rats induced by a high-fat diet were monitored weekly for blood pressure and body weight measurement. The changes of hepatic injury parameters were also measured. The pathological changes in the liver were observed by HE staining and oil red O staining. We found that HDAC1 was increased in the liver of rats with MetS, while sh-HDAC1 reduced blood pressure, body weight, and hepatic injury parameters. Improvement of structural pathological alterations and reduction of lipid deposition were observed after HDAC1 inhibition. Notably, HDAC1 inhibited FGF21 expression through histone deacetylation. The hepatoprotective effects of sh-HDAC1 on rats were reversed by adenovirus-mediated knockdown of FGF21. Moreover, methyltransferase-like 3 (METTL3) mediated the N6-methyladenosine (m6A) modification of HDAC1 mRNA and increased its binding to IGF2BP2. Consistently, sh-METTL3 inhibited HDAC1 and increased FGF21 expression, thereby ameliorating liver injury in MetS rats. This study discovered that HDAC1 is capable of managing liver injury in MetS. Targeting HDAC1 may be an optimal treatment for MetS-related liver injury. Key words: METTL3, IGF2BP2, HDAC1, FGF21, metabolic syndrome, liver injury, Introduction Metabolic syndrome (MetS), also known as syndrome X, insulin resistance (IR), etc., is defined by World Health Organization as a pathological condition characterized by abdominal obesity, hypertension, as well [...]

This study focused on improving the flavor quality of seasonings, and enzymatic hydrolysis of soybean protein isolate (SPI) seasoning via traditional technology may lead to undesirable flavors. Herein, we aimed to develop a new type of SPI seasoning through microbial fermentation to improve its flavor quality. The effect of Corynebacterium glutamicum fermentation on the flavoring compounds of seasonings in SPI enzymatic hydrolysate was examined. Sensory evaluation showed that the SPI seasoning had mainly aromatic and roasted flavor, and the response signals of S18 (aromatic compounds), S24 (alcohols and aldehydes), and S25 (esters and ketones) sensors of the electronic nose differed significantly. Overall, 91 volatile compounds were identified via gas chromatography–mass spectrometry. SPI seasonings contained a higher number of alcohols, ketones, aromatics, and heterocyclic compounds than traditional seasonings, which had stronger cheese, fatty, and roasted aromas. According to the relative odor activity value (ROAV) analysis, n-pentylpyrzine, 2,6-dimethylpyrazine, and tetramethylpyrazine are the key flavoring compounds (ROAV ≥ 1) of SPI seasoning, which may impart a unique roasted and meaty aroma. Therefore, the fermentation of SPI enzymatic hydrolysate with C. glutamicum may improve the flavor quality of its products, providing a new method for the development and production of new seasoning products. [ABSTRACT FROM AUTHOR]

Glutamic acid is an important amino acid that is used widely in the fields of food, medicine, and agriculture. One of the methods of glutamic acid production is direct microbial fermentation, so the genetic stability and glutamic-acid-producing capacity of the producing strain are the keys to improving glutamic acid concentration. Experiments were carried out using Corynebacterium glutamicum GL−6 as the parental strain, with two iterations of mutagenesis by atmospheric and room temperature plasma (ARTP) and screening with agar plates tolerant to high sugar and malonic acid, and the best strains with stable phenotypes were verified by fermentation in 20 L tanks. The results show that the optimal mutagenesis time of ARTP was 140 s, with lethality and positive mutation rates of 93.0% and 15.6%, respectively. The concentrations of the high-sugar and malonic acid agar plates were 240 g/L and 35 g/L, respectively. A mutant strain, P−45, with improved glutamic acid production capacity and genetic stability, was obtained through two rounds of iterative mutagenesis screening. The concentration of this strain in the Erlenmeyer flasks was 17.7 g/L, which was 18.8% higher than that of the parental strain, GL−6, and could be inherited stably for 10 generations. In the glutamic acid synthesis pathway, the upregulation of the gene encoding citrate synthase (cs), gene encoding isocitrate dehydrogenase (icdh), and gene encoding glutamate dehydrogenase (gdh), and the downregulation of the gene encoding oxoglutarate dehydrogenase complex (odhc) increased the carbon flows of the TCA cycle and its branch metabolic flow to glutamic acid synthesis. P−45 showed a glutamic acid concentration of 147.0 g/L under fed-batch fermentation conditions in 20 L tanks, which was 81.5% higher than the starting strain, GL−6. This study provides a new technical solution for improving microbial metabolites and genetic stability. [ABSTRACT FROM AUTHOR]

The current level of horizontal wells fracturing is simply with single well, and the impact of water injection and well patterns are often neglected in enhancing the capacity of single fractured horizontal wells, which appears serious limitations in fracturing effect. Aiming at enhancing the whole block of the recovery, taking the whole reservoir as study object, this paper established an overall fracturing theoretical model for horizontal wells. Fully considering combined distribution of horizontal and vertical wells, a variety of well patterns containing horizontal and vertical wells were designed, and an optimizing design software for horizontal well fracturing was developed. Based on optimizing the well pattern of horizontal wells overall fracturing, considering different length of horizontal sections, the parameters including numbers of fractures, fracture length, conductivity, crack spacing, crack asymmetric distribution and so on were designed, and then the optimal crack parameters have been obtained to forecast the production performance of fractured horizontal wells (daily production, cumulative production, rate of water content, recovery percent of reserves and so on). The method and software would provide certain reference on enhancing the horizontal wells overall fracturing effects. [ABSTRACT FROM AUTHOR]

During the process of fracture parameters optimization by numerical simulation, the fracture parameters determination, such as half fracture length, conductivity and number of fractures, dependent primarily on the changes of daily output curve or accumulative production curve. We identify the point where the change trend becomes weaker and take the inflection point as the optimal parameters. But the similarity of each change trend at the optimal parameters point, it is difficult to accurately determine which one is the best. Different people lead to different optimal results. After analyzing the rules of curve decline rate, transferring the dynamical production data by introducing the K-value method, optimal fracture parameters could be obtained intuitively. On the basis of curve treated by K value method the optimal parameter range can be determined, which could eliminate errors caused by the human factor. [ABSTRACT FROM AUTHOR]

Introduction: This study aims to investigate whether the transrectal ultrasound-guided combined biopsy (CB) improves the detection rates of prostate cancer (PCa) and clinically significant PCa (csPCa) in biopsy-naïve patients. We also aimed to compare the Prostate Imaging Reporting and Data System (PI-RADS v2.1) score, ADC values, and PSA density (PSAd) in predicting csPCa by the combined prostate biopsy., Methods: This retrospective and single-center study included 389 biopsy-naïve patients with PSA level 4~20 ng/ml, of whom 197 underwent prebiopsy mpMRI of the prostate. The mpMRI-based scores (PI-RADS v2.1 scores and ADC values) and clinical parameters were collected and evaluated by logistic regression analyses. Multivariable models based on the mpMRI-based scores and clinical parameters were developed by the logistic regression analyses to forecast biopsy outcomes of CB in biopsy-naïve patients. The ROC curves measured by the AUC values, calibration plots, and DCA were performed to assess multivariable models., Results: The CB can detect more csPCa compared with TRUSB (32.0% vs. 53%). The Spearman correlation revealed that Gleason scores of the prostate biopsy significantly correlated with PI-RADS scores and ADC values. The multivariate logistic regression confirmed that PI-RADS scores 4, 5, and prostate volume were important predictors of csPCa. The PI-RADS+ADC+PSAd (PAP) model had the highest AUCs of 0.913 for predicting csPCa in biopsy-naïve patients with PSA level 4~20 ng/ml. When the biopsy risk threshold of the PAP model was greater than or equal to 0.10, 51% of patients could avoid an unnecessary biopsy, and only 5% of patients with csPCa were missed., Conclusion: The prebiopsy mpMRI and the combined prostate biopsy have a high CDR of csPCa in biopsy-naïve patients. A multivariable model based on the mpMRI-based scores and PSAd could provide a reference for clinicians in forecasting biopsy outcomes in biopsy-naïve patients with PSA 4~20 ng/ml and make a more comprehensive assessment during the decision-making of the prostate biopsy., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Ren, Chen, Liu, Huang, Wang, Yang, Bai, Guo, Ling and Mao.)

BiFeO 3 -BaTiO 3 (BF-BT) dielectric ceramics are receiving more and more concern for advanced energy storage devices owing to their excellent ferroelectric properties and environmental sustainability. However, the energy density and efficiency are limited in spite of the large remanent polarization. Herein, we proposed a multiscale optimization strategy via a local compositional disorder with a Birich content and nanodomain engineering by introducing the Sr 0.7 Bi 0.2 Ca 0.1 TiO 3 (SBCT) into BF-BT ceramics. Interestingly, an extraordinary energy storage property (ESP) with a high reversible energy storage density ( W rec ) of ∼3.79 J/cm 3 and an ultrahigh polarization discrepancy (Δ P ) of ∼58.5 μC/cm 2 were obtained in the SBCT-modified BF-BT ceramics under 160 kV/cm. The boosted ESP should be attributed to the fact that the replacement of A/B-sites cations could transform the long-range ferroelectric order of the BF-BT system into polar nanoregions (PNRs) along with the refined grain size, decreased leakage current, and broadened energy band gap. Moreover, good frequency (1-10 3 Hz) and temperature (25-125 °C) stabilities, high fatigue resistance (× 10 5 ), large power density (∼31.1 MW/cm 3 ), and fast discharge time (∼97 ns) were also observed for the optimized ceramics. These results illustrate a potentially effective method for creating high ESP lead-free ceramics at a low electric field.

In this study, a novel metal oxide, lanthanum nickelate (LNO) with a perovskite structure, was introduced into a polymer solar cell (PSC) device, replacing the PEDOT:PSS hole transport layer (HTL). The results show that the LNO-based PTB7-Th:PC 71 BM solar cell exhibits a higher circuit current density, power conversion efficiency, and stability compared with a device with PEDOT:PSS HTL. To understand the effect of LNO HTL on the performance of devices, the active layer morphology and charge transport characteristics in PSCs were systematically analyzed. The morphology of active layer was affected by the HTL, which further regulated the generation and transport processes of charge carrier in the PSC device. For the LNO HTL, an appropriate thickness (8 nm) and a small surface roughness ( S q = 0.7 nm) can coordinate the energy-level structure of device and improve the interface contact between the FTO electrode and PTB7-Th:PC 71 BM active layer, promoting the charge transport performance of device. Therefore, this work provides a new consideration for the preparation of efficient, stable, and low-cost polymer solar cells.