Search

This research presented, for the first time, the results of the successful application of the waste press sludges, WSLP (plant for lacquer and paint) and WSEP (powdery enamel plant), from a wastewater treatment plant generated during heating device production in the construction industry. The results of WSEP characterization and its influence on cement paste, mortar, and concrete properties showed that this material could be used as a cement replacement (with a maximum replacement amount of 20%) in producing mortar and concrete. Although waste WSLP sludge does not possess pozzolanic properties and does not meet the criteria prescribed by the standards for application in mortar and concrete due to its chemical inertness and fineness, as well as its extended setting time, it can be used as a replacement for stone filler or other powdered mineral admixture in the production of self-compacting concrete (SCC) in amounts up to 100%, with a maximum quantity of up to 100 kg/m3. The obtained results indicate that with the appropriate conversion, waste sludges, despite representing hazardous waste, can be used as safe products in the construction industry; i.e., the waste material can become a useful and valuable raw material by applying (respecting) all of the principles of the green economy.

The utilization of supported amines as adsorbents in direct air capture (DAC) has been demonstrated to be a promising strategy for the reduction of CO2 emissions. To improve the performance of amine-based adsorbents, the incorporation of additives has been widely adopted. In the present study, we conduct a comprehensive comparison of seven additives on tetraethylenepentamine-impregnated mesoporous silica as a representative amine-based adsorbent. The results indicate that minor molecular weight additives with hydroxyl groups show improved adsorption-desorption performance and increase oxidative stability. A proposed mechanism for these improvements is the combined physical and chemical promotion effects of hydroxyl groups. Through a comprehensive review of existing literature, it is found that the effects of additives on amine-based adsorbents are dependent on factors, such as additive type, pristine adsorbent properties, incorporation method, and testing conditions. Based on these findings, it is recommended that future DAC systems prioritize the use of hydroxyl-containing additives, whereas higher CO2 concentration and temperature capture may benefit from the incorporation of additives without hydroxyl groups. These conclusions are expected to contribute to the design of efficient adsorbents for CO2 capture.

Supported polyethyleneimine (PEI) adsorbent is one of the most promising commercial direct air capture (DAC) adsorbents with a long research history since 2002. Although great efforts have been input, there are still limited improvements for this material in its CO2 capacity and adsorption kinetics under ultradilute conditions. Supported PEI also suffers significantly reduced adsorption capacities when working at sub-ambient temperatures. This study reports that mixing diethanolamine (DEA) into supported PEI can increase 46% and 176% of pseudoequilibrium CO2 capacities at DAC conditions compared to the supported PEI and DEA, respectively. The mixed DEA/PEI functionalized adsorbents maintain the adsorption capacity at sub-ambient temperatures of −5 to 25 °C. In comparison, a 55% reduction of CO2 capacity is observed for supported PEI when the operating temperature decreases from 25 to −5 °C. In addition, the supported mixed DEA/PEI with a ratio of 1:1 also shows fast desorption kinetics at temperatures as low as 70 °C, resulting in maintaining high thermal and chemical stability over 50 DAC cycles with a high average CO2 working capacity of 1.29 mmol g−1. These findings suggest that the concept of “mixed amine”, widely studied in the solvent system, is also practical to supported amine for DAC applications.

Solving problems with hazardous waste materials is of crucial importance today. In the presented study, the application of waste vitreous enamel as a cement replacement up to 30% in mortar and concrete production was investigated. The chemical and physical-chemical characterization of the starting material was performed, as well as a leaching test and physical-mechanical characterization of mortar and concrete mixes. Obtained results showed that, due to its chemical composition, the vitreous enamel used must be classified as hazardous waste. At the same time, it possesses pozzolanic properties and satisfies minimal criteria for use as a cement replacement. Testing mortars and concrete mixes indicate that waste vitreous enamel can be applied as a construction material for cement replacement in the maximal amount of 20%. The leaching test was performed in accordance with international standard EN 12457-2 on hardened mortar with a maximal cement replacement of 20%. The results showed that there was no significant release of toxic elements, i.e., that the practical application of hazardous waste vitreous enamel in the construction industry may be fully in line with environmental standards.

Solving problems with hazardous waste materials is of crucial importance today. In the presented study, the application of waste vitreous enamel as a cement replacement up to 30% in mortar and concrete production was investigated. The chemical and physical-chemical characterization of the starting material was performed, as well as a leaching test and physical-mechanical characterization of mortar and concrete mixes. Obtained results showed that, due to its chemical composition, the vitreous enamel used must be classified as hazardous waste. At the same time, it possesses pozzolanic properties and satisfies minimal criteria for use as a cement replacement. Testing mortars and concrete mixes indicate that waste vitreous enamel can be applied as a construction material for cement replacement in the maximal amount of 20%. The leaching test was performed in accordance with international standard EN 12457-2 on hardened mortar with a maximal cement replacement of 20%. The results showed that there was no significant release of toxic elements, i.e., that the practical application of hazardous waste vitreous enamel in the construction industry may be fully in line with environmental standards.