Search

Vegetation plays a key role in trapping sediments and further controlling pollutants. However, few studies were conducted to clarify the erosion and deposition laws of sediments and the influence factors caused by vegetation patch properties, which is not conducive to the revelation of riverbank protection and erosion prevention. Therefore, this study investigated the change in scouring and deposition characteristics around submerged vegetation patches of nine kinds of typical configurations and their influencing factors. Vegetation patches were assembled from three vegetation densities (G/d = 0.83, 1.3, and 1.77, representing dense, medium, and sparse, respectively), and three vegetation patch thicknesses (dn = 170, 400, and 630, representing narrow, usual, and wide, respectively), to measure vegetation patch property influences. Flow velocity, scouring, and deposition characteristics under nine patches were determined by a hydraulic flume experiment, three-dimensional acoustic Doppler velocimetry (ADV), and three-dimensional laser scanner, and then ten geometry and morphology indices were measured and calculated based on the results of laser scanning. Results showed that both vegetation patch density and thickness were positively related to the turbulence kinetic energy (TKE) above the vegetation canopy, and only vegetation patch density was negatively related to the flow velocity above the vegetation canopy. The relation between the product of density and vegetation patch thickness and erosion area in planform (EA) showed a power function (R2 = 0.644). Both density and vegetation patch thickness determined the scouring degree, but deposition location and amount did not rely on each one simply. On average, medium density showed the smallest maximum erosion length (MEL), EA, deposition area in planform (DA), and average deposition length (ADL) and a minimum of the above parameters also occurred at narrow vegetation patch thickness. The shape factor of the erosion volume (SFEV), the shape factor of the deposition volume (SFDV), ADL, and MEL of medium density and narrow thickness vegetation patch (G/d = 1.3, dn = 170) were significantly smaller than that of other types of patches. DA and equivalent prismatic erosion depth on the erosion area (EPED) were significantly linearly related (R2 = 0.766). Consequently, most sediment was deposited close to the vegetation patch edge. It is suggested that vegetation patch thickness and density should be given to control sediment transport. In particular, natural vegetation growth changes vegetation patch density and then alters vegetation patch thickness. Management and repair need to be first considered. The results of this study shed light on riparian zone recovery and vegetation filter strip mechanism. [ABSTRACT FROM AUTHOR]

High-energy exciton emission could allow single-component multi-colour display or white light-emitting diodes. However, the thermal relaxation of high-energy excitons is much faster than the photon emission of them, making them non-emissive. Here, we report quantum dots with light hole-heavy hole splitting exhibiting strong high-energy exciton electroluminescence from high-lying light holes, opening a gate for high-performance multi-colour light sources. The high-energy electroluminescence can reach 44.5% of the band-edge heavy-hole exciton emission at an electron flux density Φe of 0.71 × 1019 s−1 cm−2 − 600 times lower than the photon flux density Φp (4.3 × 1021 s−1 cm−2) required for the similar ratio. Our simulation and experimental results suggest that the oscillator strength of heavy holes reduces more than that of light holes under electric fields. We attribute this as the main reason for strong light-hole electroluminescence. We observe this phenomenon in both CdxZn1-xSe-ZnS and CdSe-CdS core-shell quantum dots exhibiting large light hole-heavy hole splittings. Previous observations of high-energy exciton electroluminescence rely on filling the ground state with excessive charges, Wang et al. report such observation from quantum dots at low charge concentration by increasing the relative oscillator strength of higher-lying light holes comparing to that of ground-state heavy holes. [ABSTRACT FROM AUTHOR]