Search

A series of (C^N)Pt(acac)-type complexes has been successfully synthesized with a benzo[b]furan, benzo[b]thiophene, benzo[b]selenophene, or benzo[b]tellurophene group in the benzoaryl-pyridine ligand. Using X-ray crystallography, the chemical structures of the complexes with benzo[b]selenophene and benzo[b]tellurophene groups have been clearly revealed. The photophysical, electrochemical, and electroluminescent (EL) behaviors of these (C^N)Pt(acac)-type complexes have been fully characterized. Furthermore, both time-dependent functional theory (TD-DFT) and natural transition orbital (NTO) theoretical results have been obtained to gain insight into the absorption and emission features. It has been shown that both the absorption bands with the lowest energy and the phosphorescence emission behaviors are dominated by the benzoaryl-pyridine cyclometalating ligand. Importantly, the effects of the group VIA atoms on the properties of these (C^N)Pt(acac)-type complexes have been revealed. Owing to the rareness of (C^N)Pt(acac)-type complexes with benzo[b]selenophene and benzo[b]tellurophene groups, their EL abilities have been characterized using solution-processed organic light-emitting diodes (OLEDs). The optimized red OLEDs with the complex bearing a benzo[b]selenophene unit show a maximum external quantum efficiency (ηext) of 6.3%, current efficiency (ηL) of 10.5 cd A−1, and power efficiency (ηP) of 9.1 lm W−1, while the EL device with the complex bearing a benzo[b]tellurophene unit can give deep-red emission at ca. 636 nm with ηext of 6.3%, ηL of 6.5 cd A−1, and ηP of 5.8 lm W−1. This research not only provides novel (C^N)Pt(acac)-type complexes, but also furnishes critical information regarding the photophysical and EL behavior of these new complexes. [ABSTRACT FROM AUTHOR]

Three novel AuI polyynes have been prepared in high yield by copolymerization between an AuI complex precursor and different ethynyl aromatic ligands. The investigation of their photophysical behavior has indicated that forming polyynes through polymerization not only maintains the high transparency of the corresponding AuI polyynes similar to those of their corresponding small molecular AuI acetylides, but also effectively enhances their triplet (T1) emission ability. Critically, owing to their enhanced T1 emission ability, all the AuI polyynes exhibit a stronger optical power limiting (OPL) ability against a 532 nm laser than the corresponding small molecular AuI acetylides. The AuI polyynes based on fluorene and triphenylamine ligands show even better OPL performance than the state-of-the-art OPL material C60, indicating their great potential in the field of laser protection. More importantly, in a prototype OPL device made by doping the fluorene-based AuI polyyne into a polystyrene (PS) solid matrix, substantially improved OPL activity has been observed compared with that in the solution, demonstrating its great potential for practical application. All these results have provided a new strategy to achieve a balance between high OPL activity and good transparency for OPL materials, representing a valuable attempt towards developing new OPL materials with high performance to cope with the key problems in the field of nonlinear optics. [ABSTRACT FROM AUTHOR]

Functional PtII ppy-type complexes (ppy = 2-phenylpyridine anion) with pyridine and chloride monodentate ligands are prepared, which show high electroluminescence efficiencies. [ABSTRACT FROM AUTHOR]

Inspired by the emissive features of ZnII complexes based on bis-Schiff base ligands, bis-ZnII salphen complexes bearing pyridyl functionalized ligands have been successfully synthesized. Their photophysical features, electrochemical behavior and electroluminescent (EL) properties have been investigated in detail. The functionalized bis-ZnII salphen complexes can exhibit high thermal stability up to 417 °C, and their photoluminescence (PL) spectra show a maximal emission wavelength peak at ca. 565 nm both in solution and PMMA doped films. The PL investigation of the neat films for these functionalized bis-ZnII salphen complexes indicated that the pyridyl functionalized ligands can effectively reduce the degree of molecular aggregation to enhance their emission intensity. Taking advantage of the charge carrier injection/transporting ability of the pyridyl functionalized ligands and their dendritic design, the optimized EL devices fabricated by a simple solution-processing method can achieve a peak luminance (Lmax) of 3589 cd m−2, a maximal external quantum efficiency (ηext) of 1.46%, a maximal current efficiency (ηL) of 4.1 cd A−1 and a maximal power efficiency (ηp) of 3.8 lm W−1. These results should afford important instructions for exploiting high performance fluorescent emitters based on dinuclear ZnII complexes. [ABSTRACT FROM AUTHOR]

Two homoleptic thiazole-based IrIII phosphorescent emitters, Ir-3Tz1F and Ir-3Tz2F, with fluorinated 2-phenylthiazole-type ligands were designed and prepared. Their thermal stability, and photophysical and electrochemical properties, as well as electroluminescent (EL) performances in both monochromic OLEDs and solution-processed WOLEDs were investigated. When doped in monochromic OLEDs made by vacuum deposition, Ir-3Tz1F gave the maximum EL efficiencies with ηL of 56.2 cd A−1, ηext of 15.8% and ηp of 50.2 lm W−1. Critically, solution-processed WOLEDs based on Ir-3Tz1F with three primary colors could achieve an excellent trade-off among the stable balanced white EL spectra, a high EL efficiency and a high color rendering index (CRI). The optimized solution-processed WOLED exhibited very attractive EL efficiencies of 33.4 cd A−1, 16.5% and 30.6 lm W−1, while maintaining both a high CRI of ca. 80 and very stable Commission Internationale de L’Eclairage (CIE) coordinates in a wide driving voltage range from 4 V to 11 V. [ABSTRACT FROM AUTHOR]

Three Pt(ii) acetylides have been prepared by coupling trans-[PtCl2(PBu3)2] to ethynyl aromatic ligands with electron-withdrawing phenylsulfonyl units in high yields (＞85%). The investigation of their photophysical behavior has shown that the unique conjugation-breaking configuration of the –SO2– linker in the phenylsulfonyl units can afford a very short cut-off wavelength (λcut-off) of ＜390 nm to the Pt(ii) acetylides, furnishing excellent transparency of these compounds. Critically, the triplet quantum yields (ΦP) of the prepared Pt(ii) acetylides can be effectively enhanced from 0.52% to 15.92% through increasing the number of fluorine substituents on the phenylsulfonyl units in the organic ligands. Benefiting from their enhanced ΦP, the phenylsulfonyl-based Pt(ii) acetylides can exhibit comparable or even better optical power limiting (OPL) performance against 532 nm lasers than the state-of-the-art OPL material C60, indicating their great potential in the field of laser protection. All of these results have provided a new strategy to achieve consistency between high OPL ability and good transparency for OPL materials, representing a valuable attempt for coping with key problems in the field of nonlinear optics. [ABSTRACT FROM AUTHOR]

A series of (C^N)Pt(acac)-type complexes has been successfully synthesized with a benzo[b]furan, benzo[b]thiophene, benzo[b]selenophene, or benzo[b]tellurophene group in the benzoaryl-pyridine ligand. Using X-ray crystallography, the chemical structures of the complexes with benzo[b]selenophene and benzo[b]tellurophene groups have been clearly revealed. The photophysical, electrochemical, and electroluminescent (EL) behaviors of these (C^N)Pt(acac)-type complexes have been fully characterized. Furthermore, both time-dependent functional theory (TD-DFT) and natural transition orbital (NTO) theoretical results have been obtained to gain insight into the absorption and emission features. It has been shown that both the absorption bands with the lowest energy and the phosphorescence emission behaviors are dominated by the benzoaryl-pyridine cyclometalating ligand. Importantly, the effects of the group VIA atoms on the properties of these (C^N)Pt(acac)-type complexes have been revealed. Owing to the rareness of (C^N)Pt(acac)-type complexes with benzo[b]selenophene and benzo[b]tellurophene groups, their EL abilities have been characterized using solution-processed organic light-emitting diodes (OLEDs). The optimized red OLEDs with the complex bearing a benzo[b]selenophene unit show a maximum external quantum efficiency (ηext) of 6.3%, current efficiency (ηL) of 10.5 cd A-1, and power efficiency (ηP) of 9.1 lm W-1, while the EL device with the complex bearing a benzo[b]tellurophene unit can give deep-red emission at ca. 636 nm with ηext of 6.3%, ηL of 6.5 cd A-1, and ηP of 5.8 lm W-1. This research not only provides novel (C^N)Pt(acac)-type complexes, but also furnishes critical information regarding the photophysical and EL behavior of these new complexes.

[This corrects the article DOI: 10.1002/advs.201701067.].

Functional Pt II ppy-type complexes (ppy = 2-phenylpyridine anion) with pyridine and chloride monodentate ligands are prepared, which show high electroluminescence efficiencies.

Inspired by the emissive features of Zn II complexes based on bis-Schiff base ligands, bis-Zn II salphen complexes bearing pyridyl functionalized ligands have been successfully synthesized. Their photophysical features, electrochemical behavior and electroluminescent (EL) properties have been investigated in detail. The functionalized bis-Zn II salphen complexes can exhibit high thermal stability up to 417 °C, and their photoluminescence (PL) spectra show a maximal emission wavelength peak at ca. 565 nm both in solution and PMMA doped films. The PL investigation of the neat films for these functionalized bis-Zn II salphen complexes indicated that the pyridyl functionalized ligands can effectively reduce the degree of molecular aggregation to enhance their emission intensity. Taking advantage of the charge carrier injection/transporting ability of the pyridyl functionalized ligands and their dendritic design, the optimized EL devices fabricated by a simple solution-processing method can achieve a peak luminance (L max ) of 3589 cd m -2 , a maximal external quantum efficiency (η ext ) of 1.46%, a maximal current efficiency (η L ) of 4.1 cd A -1 and a maximal power efficiency (η p ) of 3.8 lm W -1 . These results should afford important instructions for exploiting high performance fluorescent emitters based on dinuclear Zn II complexes.