Search

Chemically defined, suspension culture conditions are a key requirement in realizing clinical translation of engineered cardiac tissues (ECTs). Building on our previous work producing functional ECT microspheres through differentiation of biomaterial encapsulated human induced pluripotent stem cells (hiPSCs), here we establish the ability to use chemically defined culture conditions, including stem cell media (E8) and cardiac differentiation media (chemically defined differentiation media with three components, CDM3). A custom microfluidic cell encapsulation system was used to encapsulate hiPSCs at a range of initial cell concentrations and diameters in the hybrid biomaterial, poly(ethylene glycol)-fibrinogen (PF), for the formation of highly spherical and uniform ECT microspheres for subsequent cardiac differentiation. Initial microsphere diameter could be tightly controlled, and microspheres could be produced with an initial diameter between 400 and 800 µm. Three days after encapsulation, cardiac differentiation was initiated through small molecule modulation of Wnt signaling in CDM3. Cardiac differentiation occurred resulting in in situ ECT formation; results showed that this differentiation protocol could be used to achieve cardiomyocyte (CM) contents greater than 90%, although there was relatively high variability in CM content and yield between differentiation batches. Spontaneous contraction of ECT microspheres initiated between Days 7 and 10 of differentiation and ECT microspheres responded to electrical pacing up to 1.5 Hz. Resulting CMs had well-defined sarcomeres and the gap junction protein, connexin 43, and had appropriate temporal changes in gene expression. In summary, this study demonstrated the proof-of-concept to produce functional ECT microspheres with chemically defined media in suspension culture in combination with biomaterial support of microsphere encapsulated hiPSCs., (© 2024 Wiley Periodicals LLC.)

A reliable suspension-based platform for scaling engineered cardiac tissue (ECT) production from human induced pluripotent stem cells (hiPSCs) is crucial for regenerative therapies. Here, we compared the production and functionality of ECTs formed using our scaffold-based, engineered tissue microsphere differentiation approach with those formed using the prevalent scaffold-free aggregate platform. We utilized a microfluidic system for the rapid (1 million cells/min), high density (30, 40, 60 million cells/ml) encapsulation of hiPSCs within PEG-fibrinogen hydrogel microspheres. HiPSC-laden microspheres and aggregates underwent suspension-based cardiac differentiation in chemically defined media. In comparison to aggregates, microspheres maintained consistent size and shape initially, over time, and within and between batches. Initial size and shape coefficients of variation for microspheres were eight and three times lower, respectively, compared to aggregates. On day 10, microsphere cardiomyocyte (CM) content was 27 % higher and the number of CMs per initial hiPSC was 250 % higher than in aggregates. Contraction and relaxation velocities of microspheres were four and nine times higher than those of aggregates, respectively. Microsphere contractile functionality also improved with culture time, whereas aggregate functionality remained unchanged. Additionally, microspheres displayed improved β-adrenergic signaling responsiveness and uniform calcium transient propagation. Transcriptomic analysis revealed that while both microspheres and aggregates demonstrated similar gene regulation patterns associated with cardiomyocyte differentiation, heart development, cardiac muscle contraction, and sarcomere organization, the microspheres exhibited more pronounced transcriptional changes over time. Taken together, these results highlight the capability of the microsphere platform for scaling up biomanufacturing of ECTs in a suspension-based culture platform., Competing Interests: Auburn University holds four patents related to the cardiac differentiation approach and the microfluidic cell encapsulation system employed in this manuscript., (© 2024 The Authors.)

Tumor necrosis factor alpha (TNF-α)/hypoxia-treated 3T3-L1 adipocytes have been used to model inflamed and insulin-resistant adipose tissue: this study examines gaps in the model. We tested whether modulating TNF-α/hypoxia treatment time could reduce cell death while still inducing inflammation and insulin resistance. Adipocytes were treated with TNF-α (12 h or 24 h) and incubated in a hypoxic chamber for 24 h. To examine maintenance of the phenotype over time, glucose and FBS were added at 24 h post initiation of treatment, and the cells were maintained for an additional 48 h. Untreated adipocytes were used as a control. Viability, insulin resistance, and inflammation were assessed using Live/Dead staining, RT-qPCR, ELISA, and glucose uptake assays. Treatment for 12 h with TNF-α in the presence of hypoxia resulted in an increase in the percentage of live cells compared to 24 h treated cells. Importantly, insulin resistance and inflammation were still induced in the 12 h treated adipocytes: the expression of the insulin sensitive and inflammatory genes was decreased and increased, respectively. In 72 h treated adipocytes, no significant differences were found in the viability, glucose uptake or insulin-sensitive and inflammatory gene expression. This study provides a modified approach to in vitro odeling adipocyte inflammation and insulin resistance.        .

To overcome the limitations of in vitro two-dimensional (2D) cancer models in mimicking the complexities of the native tumor milieu, three-dimensional (3D) engineered cancer models using biomimetic materials have been introduced to more closely recapitulate the key attributes of the tumor microenvironment. Specifically, for colorectal cancer (CRC), a few studies have developed 3D engineered tumor models to investigate cell-cell interactions or efficacy of anti-cancer drugs. However, recapitulation of CRC cell line phenotypic differences within a 3D engineered matrix has not been systematically investigated. Here, we developed an in vitro 3D engineered CRC (3D-eCRC) tissue model using the natural-synthetic hybrid biomaterial PEG-fibrinogen and three CRC cell lines, HCT 116, HT-29, and SW480. To better recapitulate native tumor conditions, our 3D-eCRC model supported higher cell density encapsulation (20 × 10 6  cells/mL) and enabled longer term maintenance (29 days) as compared to previously reported in vitro CRC models. The 3D-eCRCs formed using each cell line demonstrated line-dependent differences in cellular and tissue properties, including cellular growth and morphology, cell subpopulations, cell size, cell granularity, migration patterns, tissue growth, gene expression, and tissue stiffness. Importantly, these differences were found to be most prominent from Day 22 to Day 29, thereby indicating the importance of long-term culture of engineered CRC tissues for recapitulation and investigation of mechanistic differences and drug response. Our 3D-eCRC tissue model showed high potential for supporting future in vitro comparative studies of disease progression, metastatic mechanisms, and anti-cancer drug candidate response in a CRC cell line-dependent manner., (© 2023 Wiley Periodicals LLC.)

To investigate the ratiometric role of fibroblasts in prostate cancer (PCa) progression, this work establishes a matrix-inclusive, 3D engineered prostate cancer tissue (EPCaT) model that enables direct coculture of neuroendocrine-variant castration-resistant (CPRC-ne) or androgen-dependent (ADPC) PCa cells with tumor-supporting stromal cell types. Results show that the inclusion of fibroblasts within CRPC-ne and ADPC EPCaTs drives PCa aggression through significant matrix remodeling and increased proliferative cell populations. Interestingly, this is observed to a much greater degree in EPCaTs formed with a small number of fibroblasts relative to the number of PCa cells. Fibroblast coculture also results in ADPC behavior more similar to the aggressive CRPC-ne condition, suggesting fibroblasts play a role in elevating PCa disease state and may contribute to the ADPC to CRPC-ne switch. Bulk transcriptomic analyses additionally elucidate fibroblast-driven enrichment of hallmark gene sets associated with tumorigenic progression. Finally, the EPCaT model clinical relevancy is probed through a comparison to the Cancer Genome Atlas (TCGA) PCa patient cohort; notably, similar gene set enrichment is observed between EPCaT models and the patient primary tumor transcriptome. Taken together, study results demonstrate the potential of the EPCaT model to serve as a PCa-mimetic tool in future therapeutic development efforts., (© 2023 Wiley-VCH GmbH.)

In this study, we used machine learning (ML) to classify the cardiomyocyte (CM) content on day 10 of the differentiation of human-induced pluripotent stem cell (hiPSC)-laden microspheroids using easily acquirable nondestructive phase-contrast images taken in the middle of differentiation and tunable experimental parameters. Scale-up suspension culture, use of engineered tissues to support stem cell differentiation, and CM production for improved control over cellular microenvironment in the suspension system need nondestructive methods to track engineered tissue development. The ability to couple images that capture experimenter perceived "good" or "bad" batches based on visualization at early differentiation time points with actual experimental outcomes in an unbiased way is a step toward building these methods. In recent years, ML techniques have been successfully applied to identify critical process parameters and use this information to build models that describe process outcomes in cell production and hiPSC differentiation. Building upon these successes, here, we utilize convolutional neural networks (CNNs) to build a binary classifier model for CM content on differentiation day 10 (dd10) for hiPSC-CMs. We consider two separate data sets as potential input features for the classification models. The first set includes phase-contrast images of microspheroid tissues taken on days 3 and 5 of the differentiation batches at different experimental conditions. The second set supplements the images with tunable experimental differentiation parameters, such as cell concentration and microspheroids' size. The CM content classes were sufficient and insufficient . The accuracy of the CNN classifier using images only was 63%. The addition of experimental features increased the accuracy to 85%, indicating the importance of tunable parameters in predicting CM content. Impact statement Machine learning approaches were used to predict the final cardiomyocyte (CM) content class (sufficient vs. insufficient) of engineered cardiac tissue microspheroids produced through suspension-based cardiac differentiation of human-induced pluripotent stem cell-laden engineered tissue microspheroids. The models used specified experimental features and data collected using nondestructive inexpensive methods, specifically phase-contrast images taken during the initial days of differentiation as inputs. The best model was a convolutional neural network trained using experimental features and differentiation day 5 images. It classified the CM content with 85% accuracy and replicated and formalized experimenter's visual intuition about differentiation outcomes by incorporating images from early time points.

Cardiac tissue engineering has been working to alleviate the immense burden of cardiovascular disease for several decades. To improve cardiac tissue homogeneity and cardiomyocyte (CM) maturation, in this study, we investigated altering initial encapsulation geometry in a three-dimensional (3D) direct cardiac differentiation platform. Traditional engineered cardiac tissue production utilizes predifferentiated CMs to produce 3D cardiac tissue and often involves various cell selection and exogenous stimulation methods to promote CM maturation. Starting tissue formation directly with human induced pluripotent stem cells (hiPSCs), rather than predifferentiated CMs, simplifies the engineered cardiac tissue formation process, making it more applicable for widespread implementation and scale-up. In this study, hiPSCs were encapsulated in poly (ethylene glycol)-fibrinogen in three tissue geometries (disc-shaped microislands, squares, and rectangles) and subjected to established cardiac differentiation protocols. Resulting 3D engineered cardiac tissues (3D-ECTs) from each geometry displayed similar CM populations (∼65%) and gene expression over time. Notably, rectangular tissues displayed less tissue heterogeneity and suggested more advanced features of maturing CMs, including myofibrillar alignment and Z-line formation. In addition, rectangular tissue showed significantly higher anisotropic contractile properties compared to square and microisland tissues (MI 0.28 ± 0.03, SQ 0.35 ± 0.05, RT 0.79 ± 0.04). This study demonstrates a straightforward method for simplifying and improving 3D-ECT production without the use of exogenous mechanical or electrical pacing and has the potential to be utilized in bioprinting and drug testing applications. Impact statement Current methods for improving cardiac maturation postdifferentiation remain tedious and complex. In this study, we examined the impact of initial encapsulation geometry on improvement of three-dimensional engineered cardiac tissue (3D-ECT) production and postdifferentiation maturation for three tissue geometries, including disc-shaped microislands, squares, and rectangles. Notably, rectangular 3D-ECTs displayed less tissue heterogeneity and more advanced features of maturing cardiomyocytes, including myofibrillar alignment, Z-line formation, and anisotropic contractile properties, compared to microisland and square tissues. This study demonstrates an initial human induced pluripotent stem cell-encapsulated rectangular tissue geometry can improve cardiac maturation, rather than implementing cell selection or tedious postdifferentiation manipulation, including exogenous mechanical and/or electrical pacing.

The aim of this study was to investigate the ability of peptides and peptide combinations to support circulating endothelial colony forming cell (ECFC) rolling and adhesion under shear flow, informing biomaterial design in moving toward rapid cardiovascular device endothelialization. ECFCs have high proliferative capability and can differentiate into endothelial cells, making them a promising cell source for endothelialization. Both single peptides and peptide combinations designed to target integrins α 4 β 1 and α 5 β 1 were coupled to poly(ethylene glycol) hydrogels, and their performance was evaluated by monitoring velocity patterns during the ECFC rolling process, in addition to firm adhesion (capture). Tether percentage and velocity fluctuation, a parameter newly defined here, were found to be valuable in assessing cell rolling velocity patterns and when used in combination were able to predict cell capture. REDV-containing peptides binding integrin α 4 β 1 have been previously shown to reduce ECFC rolling velocity but not to support firm adhesion. This study finds that the performance of REDV-containing peptides in facilitating ECFC dynamic adhesion and capture can be improved by combination with α 5 β 1 integrin-binding peptides, which support ECFC static adhesion. Moreover, when similar in length, the peptide combinations may have synergistic effects in capturing ECFCs. With matching lengths, the peptide combinations including CRRETAWAC(cyclic)+REDV, P_RGDS+KSSP_REDV, and P_RGDS+P_REDV showed high values in both tether percentage and velocity fluctuation and improvement in ECFC capture compared to the single peptides at the shear rate of 20 s -1 . These newly identified peptide combinations have the potential to be used as vascular device coatings to recruit ECFCs. STATEMENT OF SIGNIFICANCE: Restoration of functional endothelium following placement of stents and vascular grafts is critical for maintaining long-term patency. Endothelial colony forming cells (ECFCs) circulating in blood flow are a valuable cell source for rapid endothelialization. Here we identify and test novel peptides and peptide combinations that can potentially be used as coatings for vascular devices to support rolling and capture of ECFCs from flow. In addition to the widely used assessment of final ECFC adhesion, we also recorded the rolling process to quantitatively evaluate the interaction between ECFCs and the peptides, obtaining detailed performance of the peptides and gaining insight into effective capture molecule design. Peptide combinations targeting both integrin α 4 β 1 and integrin α 5 β 1 showed the highest percentages of ECFC capture., (Copyright © 2022. Published by Elsevier Ltd.)

Spheroidal cancer microtissues are highly advantageous for a wide range of biomedical applications, including high-throughput drug screening, multiplexed target validation, mechanistic investigation of tumor-extracellular matrix (ECM) interactions, among others. Current techniques for spheroidal tissue formation rely heavily on self-aggregation of single cancer cells and have substantial limitations in terms of cell-type-specific heterogeneities, uniformity, ease of production and handling, and most importantly, mimicking the complex native tumor microenvironmental conditions in simplistic models. These constraints can be overcome by using engineered tunable hydrogels that closely mimic the tumor ECM and elucidate pathologically relevant cell behavior, coupled with microfluidics-based high-throughput fabrication technologies to encapsulate cells and create cancer microtissues. In this study, we employ biosynthetic hybrid hydrogels composed of poly(ethylene glycol diacrylate) (PEGDA) covalently conjugated to natural protein (fibrinogen) (PEG-fibrinogen, PF) to create monodisperse microspheres encapsulating breast cancer cells for 3D culture and tumorigenic characterization. A previously developed droplet-based microfluidic system is used for rapid, facile, and reproducible fabrication of uniform cancer microspheres with either MCF7 or MDA-MB-231 (metastatic) breast cancer cells. Cancer cell-type-dependent variations in cell viability, metabolic activity, and 3D morphology, as well as microsphere stiffness, are quantified over time. Particularly, MCF7 cells grew as tight cellular clusters in the PF microspheres, characteristic of their epithelial morphology, while MDA-MB-231 cells displayed elongated and invasive morphology, characteristic of their mesenchymal and metastatic nature. Finally, the translational potential of the cancer microsphere platform toward high-throughput drug screening is also demonstrated. With high uniformity, scalability, and control over engineered microenvironments, the established cancer microsphere model can be potentially used for mechanistic studies, fabrication of modular cancer microtissues, and future drug-testing applications.

In this manuscript we report the establishment and characterization of a three-dimensional in vitro, coculture engineered prostate cancer tissue (EPCaT) disease model based upon and informed by our characterization of in vivo prostate cancer (PCa) xenograft tumor stiffness. In prostate cancer, tissue stiffness is known to impact changes in gene and protein expression, alter therapeutic response, and be positively correlated with an aggressive clinical presentation. To inform an appropriate stiffness range for our in vitro model, PC-3 prostate tumor xenografts were established. Tissue stiffness ranged from 95 to 6,750 Pa. Notably, xenograft cell seeding density significantly impacted tumor stiffness; a two-fold increase in the number of seeded cells not only widened the tissue stiffness range throughout the tumor but also resulted in significant spatial heterogeneity. To fabricate our in vitro EPCaT model, PC-3 castration-resistant prostate cancer cells were co-encapsulated with BJ-5ta fibroblasts within a poly(ethylene glycol)-fibrinogen matrix augmented with excess poly(ethylene glycol)-diacrylate to modulate the matrix mechanical properties. Encapsulated cells temporally remodeled their in vitro microenvironment and enrichment of gene sets associated with tumorigenic progression was observed in response to increased matrix stiffness. Through variation of matrix composition and culture duration, EPCaTs were tuned to mimic the wide range of biomechanical cues provided to PCa cells in vivo; collectively, a range of 50 to 10,000 Pa was achievable. Markedly, this also encompasses published clinical PCa stiffness data. Overall, this study serves to introduce our bioinspired, tunable EPCaT model and provide the foundation for future PCa progression and drug development studies. STATEMENT OF SIGNIFICANCE: The development of cancer models that mimic the native tumor microenvironment (TME) complexities is critical to not only develop effective drugs but also enhance our understanding of disease progression. Here we establish and characterize our 3D in vitro engineered prostate cancer tissue model with tunable matrix stiffness, that is inspired by this study's spatial characterization of in vivo prostate tumor xenograft stiffness. Notably, our model's mimicry of the TME is further augmented by the inclusion of matrix remodeling fibroblasts to introduce cancer-stromal cell-cell interactions. This study addresses a critical unmet need in the field by elucidating the prostate tumor xenograft stiffness range and establishing a foundation for recapitulating the biomechanics of site-of-origin and soft tissue metastatic prostate tumors in vitro., Competing Interests: Declaration of Competing Interest Following completion of his contributions to this work, AB was hired as an employee of iThera Medical, Inc., (Copyright © 2022. Published by Elsevier Ltd.)

The development of physiologically relevant in vitro colorectal cancer (CRC) models is vital for advancing understanding of tumor biology. Although CRC patient-derived xenografts (PDXs) recapitulate key patient tumor characteristics and demonstrate high concordance with clinical outcomes, the use of this in vivo model is costly and low-throughput. Here we report the establishment and in-depth characterization of an in vitro tissue-engineered CRC model using PDX cells. To form the 3D engineered CRC-PDX (3D-eCRC-PDX) tissues, CRC PDX tumors were expanded in vivo , dissociated, and the isolated cells encapsulated within PEG-fibrinogen hydrogels. Following PEG-fibrinogen encapsulation, cells remain viable and proliferate within 3D-eCRC-PDX tissues. Tumor cell subpopulations, including human cancer and mouse stromal cells, are maintained in long-term culture (29 days); cellular subpopulations increase ratiometrically over time. The 3D-eCRC-PDX tissues mimic the mechanical stiffness of originating tumors. Extracellular matrix protein production by cells in the 3D-eCRC-PDX tissues resulted in approximately 57% of proteins observed in the CRC-PDX tumors also being present in the 3D-eCRC-PDX tissues on day 22. Furthermore, we show congruence in enriched gene ontology molecular functions and Hallmark gene sets in 3D-eCRC-PDX tissues and CRC-PDX tumors compared to normal colon tissue, while prognostic Kaplan-Meier plots for overall and relapse free survival did not reveal significant differences between CRC-PDX tumors and 3D-eCRC-PDX tissues. Our results demonstrate high batch-to-batch consistency and strong correlation between our in vitro tissue-engineered PDX-CRC model and the originating in vivo PDX tumors, providing a foundation for future studies of disease progression and tumorigenic mechanisms., (Creative Commons Attribution license.)

Colorectal cancer (CRC) is the third-leading cause of cancer-related deaths in the United States and worldwide. Obesity-a worldwide public health concern-is a known risk factor for cancer including CRC. However, the mechanisms underlying the link between CRC and obesity have yet to be fully elucidated in part because of the molecular heterogeneity of CRC. We hypothesized that obesity modulates CRC in a consensus molecular subtype (CMS)-dependent manner. RNA-seq data and associated tumor and patient characteristics including body weight and height data for 232 patients were obtained from The Cancer Genomic Atlas-Colon Adenocarcinoma (TCGA-COAD) database. Tumor samples were classified into the four CMSs with the CMScaller R package; body mass index (BMI) was calculated and categorized as normal, overweight, and obese. We observed a significant difference in CMS categorization between BMI categories. Differentially expressed genes (DEGs) between obese and overweight samples and normal samples differed across the CMSs, and associated prognostic analyses indicated that the DEGs had differing associations on survival. Using Gene Set Enrichment Analysis, we found differences in Hallmark gene set enrichment between obese and overweight samples and normal samples across the CMSs. We constructed Protein-Protein Interaction networks and observed differences in obesity-regulated hub genes for each CMS. Finally, we analyzed and found differences in predicted drug sensitivity between obese and overweight samples and normal samples across the CMSs. Our findings support that obesity impacts the CRC tumor transcriptome in a CMS-specific manner. The possible associations reported here are preliminary and will require validation using in vitro and animal models to examine the CMS-dependence of the genes and pathways. Once validated the obesity-linked genes and pathways may represent new therapeutic targets to treat colon cancer in a CMS-dependent manner., Competing Interests: The authors have declared that no competing interests exist.

Engineered cardiac tissues that can be directly produced from human induced pluripotent stem cells (hiPSCs) in scalable, suspension culture systems are needed to meet the demands of cardiac regenerative medicine. Here, we demonstrate successful production of functional cardiac tissue microspheres through direct differentiation of hydrogel encapsulated hiPSCs. To form the microspheres, hiPSCs were suspended within the photocrosslinkable biomaterial, PEG-fibrinogen (25 million cells/mL), and encapsulated at a rate of 420,000 cells/minute using a custom microfluidic system. Even at this high cell density and rapid production rate, high intra-batch and batch-to-batch reproducibility was achieved. Following microsphere formation, hiPSCs maintained high cell viability and continued to grow within and beyond the original PEG-fibrinogen matrix. These initially soft microspheres (<250 Pa) supported efficient cardiac differentiation; spontaneous contractions initiated by differentiation day 8, and the microspheres contained >75% cardiomyocytes (CMs). CMs responded appropriately to pharmacological stimuli and exhibited 1:1 capture up to 6.0 Hz when electrically paced. Over time, cells formed cell-cell junctions and aligned myofibril fibers; engineered cardiac microspheres were maintained in culture over 3 years. The capability to rapidly generate uniform cardiac microsphere tissues is critical for advancing downstream applications including biomanufacturing, multi-well plate drug screening, and injection-based regenerative therapies., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Providing control over the geometric shape of cell-laden hydrogel microspheroids, such as diameter and axial ratio, is critical for their use in biomedical applications. Building on our previous work establishing a microfluidic platform for production of large cell-laden microspheres, here we establish the ability to produce microspheroids with varying axial ratio (microrods) and elucidate the mechanisms controlling microspheroidal geometry. Microspheroids with radial diameters ranging from 300 to over 1000 μm and axial ratios from 1.3 to 3.6 were produced. Although for microfluidic devices with small channel sizes (typically <500 μm) the mechanisms governing geometric control have been investigated, these relationships were not directly translatable to production of larger microspheroids (radial diameter 10 2 - 10 3 μm) in microfluidic devices with larger channel sizes (up to 1000 μm). In particular as channel size was increased, fluid density differences became more influential in geometric control. We found that two parameters, narrowing ratio (junction diameter over outlet diameter) and flow fraction (discrete phase flow rate over total flow rate), were critical in adjusting the capillary number, modulation of which has been previously shown to enable control over microspheroid diameter and axial ratio. By changing the device design and the experimental conditions, we exploited the relationship between these parameters to predictably modulate microspheroid geometric shape. Finally, we demonstrated the applicability to tissue engineering through encapsulation of fibroblasts and endothelial colony forming cells (ECFCs) in hydrogel microspheroids with different axial ratios and negligible loss of cell viability. This study advances microfluidic production of large cell-laden microspheroids (microspheres and microrods) with controllable size and geometry, opening the door for further investigation of geometric shape-related biomedical applications such as engineered tissue formation.

Background: Endothelial colony forming cells (ECFCs) may be useful therapeutically in conditions with poor blood supply, such as distal limb wounds in the horse. Encapsulation of ECFCs into injectable hydrogel microspheres may ensure cell survival and cell localization to improve neovascularization and healing. Autologous ECFCs were isolated from 6 horses, labeled with quantum nanodots (QD), and a subset were encapsulated in poly(ethylene) glycol fibrinogen microspheres (PEG-Fb MS). Full-thickness dermal wounds were created on each distal limb and injected with empty PEG-Fb MS, serum, ECFCs, or ECFCs encapsulated into PEG- Fb MS (ECFC/MS). Analysis included wound surface area (WSA), granulation tissue scoring (GS), thermography, collagen density staining, and immunohistochemical staining for endothelial and inflammatory cells. The purpose of this study was to track cell location and evaluate wound vascularization and inflammatory response after injection of ECFC/MS or naked ECFCs in equine distal limb wounds., Results: ECFCs were found near and within newly formed blood vessels up to 3 weeks after injection. ECFC and ECFC/MS groups had the greatest blood vessel quantity at week 1 in the wound periphery. Wounds treated with ECFCs and ECFC/MS had the lowest density of neutrophils and macrophages at week 4. There were no significant effects of ECFC or ECFC/MS treatment on other measured parameters., Conclusions: Injection of microsphere encapsulated ECFCs was practical for clinical use and well-tolerated. The positive ECFC treatment effects on blood vessel density and wound inflammation warrant further investigation.

This study establishes a novel microfluidic platform for rapid encapsulation of cells at high densities in photocrosslinkable microspherical hydrogels including poly(ethylene glycol)-diacrylate, poly(ethylene glycol)-fibrinogen, and gelatin methacrylate. Cell-laden hydrogel microspheres are advantageous for many applications from drug screening to regenerative medicine. Employing microfluidic systems is considered the most efficient method for scale-up production of uniform microspheres. However, existing platforms have been constrained by traditional microfabrication techniques for device fabrication, restricting microsphere diameter to below 200 µm and making iterative design changes time-consuming and costly. Using a new molding technique, the microfluidic device employs a modified T-junction design with readily adjustable channel sizes, enabling production of highly uniform microspheres with cell densities (10-60 million cells mL -1 ) and a wide range of diameters (300-1100 µm), which are critical for realizing downstream applications, through rapid photocrosslinking (≈1 s per microsphere). Multiple cell types are encapsulated at rates of up to 1 million cells per min, are evenly distributed throughout the microspheres, and maintain high viability and appropriate cellular activities in long-term culture. This microfluidic encapsulation platform is a valuable and readily adoptable tool for numerous applications, including supporting injectable cell therapy, bioreactor-based cell expansion and differentiation, and high throughput tissue sphere-based drug testing assays., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: Endothelial progenitor cells (EPCs) contribute to neovascularization and vascular repair in vivo and are attractive for clinical use in ischemic disease. Tracking of stem and progenitor cells is essential to determine engraftment after administration. Semiconductor quantum dots (QD) are promising for cell labeling due to their ease of uptake by many cell lines and their continued presence after many cell generations. The purpose of this study was to evaluate function and growth of equine EPCs after QD labeling. Additionally, this study evaluated the duration of QD label retention and mechanisms of QD label loss., Results: Endothelial colony forming cells (ECFCs) from adult horses (N = 3) were employed for this study, with QD labeled and unlabeled ECFCs tested from each horse. Cell proliferation of ECFCs labeled with QD at 20 nM was quantified by comparing the number of cell doublings per day (NCD) and the population doubling time (PDT) in labeled and unlabeled cells. Function of labeled and unlabeled ECFCs was assessed by comparing uptake of acetylated low-density lipoprotein (DiO-Ac-LDL) and tubule formation on growth factor containing matrix. Cell proliferation was not impacted by QD labeling; both NCD (p = 0. 95) and PDT (P = 0. 91) did not differ between unlabeled and QD labeled cells. Function of ECFCs assessed by DiO-Ac-LDL and tubule formation was also not different between unlabeled and QD labeled cells (P = 0. 33 and P = 0. 52, respectively). ECFCs retained their QD labeling over 7 passages with both 5 nM and 20 nM label concentrations. Reduction in label intensity was observed over time, and the mechanism was determined to be cell division., Conclusions: Equine ECFCs are effectively labeled with QD, and QD concentrations up to 20 nM do not affect cell growth or function. QD label loss is a result of cell division. The use of QD labeling with equine EPCs may be an ideal way to track engraftment of EPCs for in vivo applications.

Our aim was to transplant blue catfish germ line stem cells into blastulae of triploid channel catfish embryos to produce interspecific xenogenic catfish. The morphological structure of the gonads of blue catfish (Ictalurus furcatus) in ~ 90- to 100-day-old juveniles, two-year-old juveniles, and mature adults was studied histologically. Both oogonia (12-15 μm, diameter with distinct nucleus 7-8 μm diameter) and spermatogonia (12-15 μm, with distinct nucleus 6-7.5 μm diameter) were found in all ages of fish. The percentage of germ line stem cells was higher in younger blue catfish of both sexes. After the testicular tissue was trypsinized, a discontinuous density gradient centrifugation was performed using 70, 45, and 35% Percoll to enrich the percentage of spermatogonial stem cells (SSCs). Four distinct cell bands were generated after the centrifugation. It was estimated that 50% of the total cells in the top band were type A spermatogonia (diameter 12-15 μm) and type B spermatogonia (diameter 10-11 μm). Germ cells were confirmed with expression of vasa. Blastula-stage embryos of channel catfish (I. punctatus) were injected with freshly dissociated blue catfish testicular germ cells as donor cells for transplantation. Seventeen days after the transplantation, 33.3% of the triploid channel catfish fry were determined to be xenogenic catfish. This transplantation technique was efficient, and these xenogenic channel catfish need to be grown to maturity to verify their reproductive capacity and to verify that for the first time SSCs injected into blastulae were able to migrate to the genital ridge and colonize. These results open the possibility of artificially producing xenogenic channel catfish males that can produce blue catfish sperm and mate with normal channel catfish females naturally. The progeny would be all C × B hybrid catfish, and the efficiency of hybrid catfish production could be improved tremendously in the catfish industry.

Assessment of anti-cancer drug efficacy in in vitro three-dimensional (3D) bioengineered cancer models provides important contextual and relevant information towards pre-clinical translation of potential drug candidates. However, currently established models fail to sufficiently recapitulate complex tumor heterogeneity. Here we present a chip-based tumor-mimetic platform incorporating a 3D in vitro breast cancer model with a tumor-mimetic microvascular network, replicating the pathophysiological architecture of native vascularized breast tumors. The microfluidic platform facilitated formation of mature, lumenized and flow-aligned endothelium under physiological flow recapitulating both high and low perfused tumor regions. Metastatic and non-metastatic breast cancer cells were maintained in long-term 3D co-culture with stromal fibroblasts in a poly(ethylene glycol)-fibrinogen hydrogel matrix within adjoining tissue chambers. The interstitial space between the chambers and endothelium contained pores to mimic the "leaky" vasculature found in vivo and facilitate cancer cell-endothelial cell communication. Microvascular pattern-dependent flow variations induced concentration gradients within the 3D tumor mass, leading to morphological tumor heterogeneity. Anti-cancer drugs displayed cell type- and flow pattern-dependent effects on cancer cell viability, viable tumor area and associated endothelial cytotoxicity. Overall, the developed microfluidic tumor-mimetic platform facilitates investigation of cancer-stromal-endothelial interactions and highlights the role of a fluidic, tumor-mimetic vascular network on anti-cancer drug delivery and efficacy for improved translation towards pre-clinical studies.

A common challenge in cell therapy is the inability to routinely maintain survival and localization of injected therapeutic cells. Delivering cells by direct injection increases the flexibility of clinical applications, but may cause low cell viability and retention rates due to the high shear forces in the needle and mechanical wash out. In this study, we encapsulated endothelial colony forming cells (ECFCs) in poly(ethylene glycol)-fibrinogen (PF) hydrogel microspheres using a custom-built microfluidic device; this system supports rapid encapsulation of high cell concentrations (10 million cells per mL) and resulting cell-laden microspheres are highly uniform in shape and size. The encapsulated ECFCs were shown to have >95% viability and continued to rapidly proliferate. Expression of cell markers (von Willebrand factor, CD105, and CD14), the ability to form tubules on basement membrane matrix, and the ability to take up low-density lipoprotein were similar between pre- and post-encapsulated cells. Viability of encapsulated ECFCs was maintained after shear through 18-23-gauge needles. Ex vivo and in vivo cell delivery studies were performed by encapsulating and injecting autologous equine ECFCs subcutaneously into distal limb full-thickness wounds of adult horses. Injected ECFCs were visualized by labeling with fluorescent nanodots before encapsulation. One week after injection, confocal microscopy analysis of biopsies of the leading edges of the wounds showed that the encapsulated ECFCs migrated into the surrounding host tissue indicating successful retention and survival of the delivered ECFCs. Rapid, scalable cell encapsulation into PF microspheres was demonstrated to be practical for use in large animal cell therapy and is a clinically relevant method to maintain cell retention and survival after local injection.

Direct stem cell encapsulation and cardiac differentiation within supporting biomaterial scaffolds are critical for reproducible and scalable production of the functional human tissues needed in regenerative medicine and drug-testing applications. Producing cardiac tissues directly from pluripotent stem cells rather than assembling tissues using pre-differentiated cells can eliminate multiple cell-handling steps that otherwise limit the potential for process automation and production scale-up. Here we asked whether our process for forming 3D developing human engineered cardiac tissues using poly(ethylene glycol)-fibrinogen hydrogels can be extended to widely used and printable gelatin methacryloyl (GelMA) hydrogels. We demonstrate that low-density GelMA hydrogels can be formed rapidly using visible light (<1 min) and successfully employed to encapsulate human induced pluripotent stem cells while maintaining high cell viability. Resulting constructs had an initial stiffness of approximately 220 Pa, supported tissue growth and dynamic remodeling, and facilitated high-efficiency cardiac differentiation (>70%) to produce spontaneously contracting GelMA human engineered cardiac tissues (GEhECTs). GEhECTs initiated spontaneous contractions on day 8 of differentiation, with synchronicity, frequency, and velocity of contraction increasing over time, and displayed developmentally appropriate temporal changes in cardiac gene expression. GEhECT-dissociated cardiomyocytes displayed well-defined and aligned sarcomeres spaced at 1.85 ± 0.1 μm and responded appropriately to drug treatments, including the β-adrenergic agonist isoproterenol and antagonist propranolol, as well as to outside pacing up to 3.0 Hz. Overall results demonstrate that GelMA is a suitable biomaterial for the production of developing cardiac tissues and has the potential to be employed in scale-up production and bioprinting of GEhECTs.

Tissue-engineered three-dimensional (3D) cancer models employing biomimetic hydrogels as cellular scaffolds provide contextual in vitro recapitulation of the native tumor microenvironment, thereby improving their relevance for use in cancer research. This study reports the use of poly(ethylene glycol)-fibrinogen (PF) as a suitable biosynthetic hydrogel for the 3D culture of three breast cancer cell lines: MCF7, SK-BR-3, and MDA-MB-231. Modification of the matrix characteristics of PF hydrogels was achieved by addition of excess poly(ethylene glycol) diacrylate, which resulted in differences in Young's moduli, degradation behavior, release kinetics, and ultrastructural variations in scaffold microarchitecture. Cancer cells were maintained in 3D culture with high viability within these hydrogels and resulted in cell-type dependent morphological changes over time. Cell proliferation and 3D morphology within the hydrogels were visualized through immunofluorescence staining. Finally, spatial heterogeneity of colony area within the hydrogels was quantified, with peripheral cells forming colonies of higher area compared to those in the interior regions. Overall, PF-based hydrogels facilitate 3D culture of breast cancer cells and investigation of cellular behavior in response to varying matrix characteristics. PF-based cancer models could be potentially used in future investigations of cancer biology and in anti-cancer drug-testing applications. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 236-252, 2017., (© 2016 Wiley Periodicals, Inc.)

Three-dimensional (3D) in vitro cancer models offer an attractive approach towards the investigation of tumorigenic phenomena and other cancer studies by providing dimensional context and higher degree of physiological relevance than that offered by conventional two-dimensional (2D) models. The multicellular tumor spheroid model, formed by cell aggregation, is considered to be the "gold standard" for 3D cancer models, due to its ease and simplicity of use. Although better than 2D models, tumor spheroids are unable to replicate key features of the native tumor microenvironment, particularly due to a lack of surrounding extracellular matrix components and heterogeneity in shape, size and aggregate forming tendencies. In order to address this issue, we have developed a 3D "tumor microsphere" model, formed by a dual-photoinitiator, aqueous-oil emulsion technique, for the encapsulation of cancer cells within PEG-fibrinogen hydrogel microspheres and for subsequent long-term 3D culture. In comparison to self-aggregated tumor spheroids, the tumor microspheres displayed a higher degree of size and shape homogeneity throughout long-term culture. In sharp contrast to cells in tumor spheroids, cells within tumor microspheres demonstrated significant loss in apico-basal polarity and cellular architecture, cellular and nuclear atypia, increased disorganization, elevated nuclear cytoplasmic ratio and nuclear volume density and reduction in cell-cell junction length, all of which are hallmarks of malignant transformation and tumorigenic progression. Additionally, the tumor microsphere model was extended for the 3D encapsulation and maintenance of a wide range of other cancer cell (metastatic and non-metastatic) types. Taken together, our results reinforce the importance of incorporating a biomimetic matrix in the cellular microenvironment of 3D tumor models and the influential effects of the matrix on the tumorigenic morphology of 3D cultured cells. The tumor microsphere system established in this study has the potential to be used in future investigations of 3D cancer cell-cell and cell-ECM interactions and in drug-testing applications., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Biomimetic polymers and materials have been widely used in tissue engineering for regeneration and replication of diverse types of both normal and diseased tissues. Cancer, being a prevalent disease throughout the world, has initiated substantial interest in the creation of tissue-engineered models for anticancer drug testing. The development of these in vitro three-dimensional (3D) culture models using novel biomaterials has facilitated the investigation of tumorigenic and associated biological phenomena with a higher degree of complexity and physiological context than that provided by established two-dimensional culture models. In this review, an overview of a wide range of natural, synthetic, and hybrid biomaterials used for 3D cancer cell culture and investigation of cancer cell behavior is presented. The role of these materials in modulating cell-matrix interactions and replicating specific tumorigenic characteristics is evaluated. In addition, recent advances in biomaterial design, synthesis, and fabrication are also assessed. Finally, the advantages of incorporating polymeric biomaterials in 3D cancer models for obtaining efficacy data in anticancer drug testing applications are highlighted.

OBJECTIVE To evaluate optimal isolation of endothelial colony-forming cells (ECFCs) from peripheral blood of horses. SAMPLE Jugular and cephalic venous blood samples from 17 adult horses. PROCEDURES Each blood sample was divided; isolation was performed with whole blood adherence (WBA) and density gradient centrifugation (DGC). Isolated cells were characterized by uptake of 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate-labeled acetylated low-density lipoprotein (DiI-Ac-LDL), vascular tubule formation, and expression of endothelial (CD34, CD105, vascular endothelial growth factor receptor-2, and von Willebrand factor) and hematopoietic (CD14) cell markers by use of indirect immunofluorescence assay (IFA) and flow cytometry. RESULTS Colonies with cobblestone morphology were isolated from 15 of 17 horses. Blood collected from the cephalic vein yielded colonies significantly more often (14/17 horses) than did blood collected from the jugular vein (8/17 horses). Of 14 cephalic blood samples with colonies, 13 were obtained with DGC and 8 with WBA. Of 8 jugular blood samples with colonies, 8 were obtained with DGC and 4 with WBA. Colony frequency (colonies per milliliter of blood) was significantly higher for cephalic blood samples and samples isolated with DGC. Cells formed vascular tubules, had uptake of DiI-Ac-LDL, and expressed endothelial markers by use of IFA and flow cytometry, which confirmed their identity as ECFCs. CONCLUSIONS AND CLINICAL RELEVANCE Maximum yield of ECFCs was obtained for blood samples collected from both the jugular and cephalic veins and use of DGC to isolate cells. Consistent yield of ECFCs from peripheral blood of horses will enable studies to evaluate diagnostic and therapeutic uses.

The development of cell-based treatments for heart disease relies on the creation of functionally mature stem cell-derived cardiomyocytes employing in vitro culture suspension systems, a process which remains a formidable and expensive endeavor. The use of nitric oxide as a signaling molecule during differentiation has demonstrated the potential for creating increased numbers of spontaneously contracting embryoid bodies in culture; however, the effects of nitric oxide signaling on the function and maturation of stem cell-derived cardiomyocytes is not well understood. In this study, the effects of nitric oxide on mouse embryonic stem cell-derived cardiomyocyte contractile activity, protein, and gene expression, and calcium handling were quantified. Embryoid bodies (EBs) formed using the hanging drop method, were treated with the soluble nitric oxide donor S-nitrosocysteine (CysNO) over a period of 18 days in suspension culture and spontaneous contractile activity was assessed. On day 8, selected EBs were dissociated to form monolayers for electrophysiological characterization using calcium transient mapping. Nitric oxide treatment led to increased numbers of stem cell-derived cardiomyocytes (SC-CMs) relative to non-treated EBs after 8 days in suspension culture. Increased incidence of spontaneous contraction and frequency of contraction were observed from days 8-14 in EBs receiving nitric oxide treatment in comparison to control. Expression of cardiac markers and functional proteins was visualized using immunocytochemistry and gene expression was assessed using qPCR. Cardiac-specific proteins were present in both CysNO-treated and control SC-CMs; however, CysNO treatment during differentiation significantly increased βMHC gene expression in SC-CMs relative to control SC-CMs. Furthermore, increased calcium transient velocity and decreased calcium transient duration was observed for CysNO-treated SC-CMs in comparison to control SC-CMs. Soluble nitric oxide donors, including S-nitrosocysteine, have advantages over other bioactive molecules for use in scalable culture systems in driving cardiac differentiation, since they are inexpensive and the diffusivity of nitric oxide is relatively high. By enabling maintenance of spontaneous contraction in suspension culture and progressing electrophysiological function of resulting SC-CMs toward a more mature phenotype, long-term application of S-nitrosocysteine was shown to be beneficial during cardiac differentiation. Taken together, these results demonstrate the efficiency of nitric oxide as a signaling compound, with implications in the improvement of pluripotent stem cell-derived cardiomyocyte maturation in large-scale culture systems., (© 2015 Wiley Periodicals, Inc.)

Human engineered heart tissues have potential to revolutionize cardiac development research, drug-testing, and treatment of heart disease; however, implementation is limited by the need to use pre-differentiated cardiomyocytes (CMs). Here we show that by providing a 3D poly(ethylene glycol)-fibrinogen hydrogel microenvironment, we can directly differentiate human pluripotent stem cells (hPSCs) into contracting heart tissues. Our straight-forward, ontomimetic approach, imitating the process of development, requires only a single cell-handling step, provides reproducible results for a range of tested geometries and size scales, and overcomes inherent limitations in cell maintenance and maturation, while achieving high yields of CMs with developmentally appropriate temporal changes in gene expression. We demonstrate that hPSCs encapsulated within this biomimetic 3D hydrogel microenvironment develop into functional cardiac tissues composed of self-aligned CMs with evidence of ultrastructural maturation, mimicking heart development, and enabling investigation of disease mechanisms and screening of compounds on developing human heart tissue., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Tracking of rolling cells via in vitro experiment is now commonly performed using customized computer programs. In most cases, two critical challenges continue to limit analysis of cell rolling data: long computation times due to the complexity of tracking algorithms and difficulty in accurately correlating a given cell with itself from one frame to the next, which is typically due to errors caused by cells that either come close in proximity to each other or come in contact with each other. In this paper, we have developed a sophisticated, yet simple and highly effective, rolling cell tracking system to address these two critical problems. This optical cell tracking analysis (OCTA) system first employs ImageJ for cell identification in each frame of a cell rolling video. A custom MATLAB code was written to use the geometric and positional information of all cells as the primary parameters for matching each individual cell with itself between consecutive frames and to avoid errors when tracking cells that come within close proximity to one another. Once the cells are matched, rolling velocity can be obtained for further analysis. The use of ImageJ for cell identification eliminates the need for high level MATLAB image processing knowledge. As a result, only fundamental MATLAB syntax is necessary for cell matching. OCTA has been implemented in the tracking of endothelial colony forming cell (ECFC) rolling under shear. The processing time needed to obtain tracked cell data from a 2 min ECFC rolling video recorded at 70 frames per second with a total of over 8000 frames is less than 6 min using a computer with an Intel® Core™ i7 CPU 2.80 GHz (8 CPUs). This cell tracking system benefits cell rolling analysis by substantially reducing the time required for post-acquisition data processing of high frame rate video recordings and preventing tracking errors when individual cells come in close proximity to one another.

Testicular germ cells of channel catfish, Ictalurus punctatus, and blue catfish, I. furcatus were separated into four layers with Percoll density gradient centrifugation, containing different cell types (40% in the first layer were spermatogonial stem cells, SSCs). Expression of seventeen genes was analyzed for cells from different layers by real-time quantitative PCR. Pfkfb4, Urod, Plzf, Integrin6, IntegrinV, Thy1 and Cdh1 genes showed the same expression change pattern in both channel and blue catfish as these genes were down-regulated in the spermatocytes and even more so in spermatids. Plzf and Integrin6 had especially high expression in SSCs and can be used as SSCs specific markers. Sox2 gene was up-regulated in spermatocytes and even more highly up-regulated in spermatids, which indicated it could be a spermatid marker. In contrast to channel catfish, Id4, Smad5 and Prdm14 gene expressions were strongly down-regulated in spermatocyte cells, but up-regulated in spermatid cells in blue catfish. Smad5 gene was down-regulated in spermatocytes, but up-regulated in both spermatogonia and spermatids, allowing identification as a marker for spermatocytes in blue catfish. Oct4, Id4, Gfrα2, Pum2 and Prdm14 genes showed different expression patterns in the testicular germ cells of channel and blue catfish. This may be a partial explanation to the differing responses of channel catfish and blue catfish to induced spawning technologies. The SSCs specific markers can be used for further SSCs labeling, which can increase the SSCs sorting efficiency and be applied in various studies involving SSCs and other germ cells.

Conductive and electroactive polymers have the potential to enhance engineered cardiac tissue function. In this study, an interpenetrating network of the electrically-conductive polymer polypyrrole (PPy) was grown within a matrix of flexible polycaprolactone (PCL) and evaluated as a platform for directing the formation of functional cardiac cell sheets. PCL films were either treated with sodium hydroxide to render them more hydrophilic and enhance cell adhesion or rendered electroactive with PPy grown via chemical polymerization yielding PPy-PCL that had a resistivity of 1.0 ± 0.4 kΩ cm, which is similar to native cardiac tissue. Both PCL and PPy-PCL films supported cardiomyocyte attachment; increasing the duration of PCL pre-treatment with NaOH resulted in higher numbers of adherent cardiomyocytes per unit area, generating cell densities which were more similar to those on PPy-PCL films (1568 ± 126 cells mm(-2), 2880 ± 439 cells mm(-2), 3623 ± 456 cells mm(-2) for PCL with 0, 24, 48 h of NaOH pretreatment, respectively; 2434 ± 166 cells mm(-2) for PPy-PCL). When cardiomyocytes were cultured on the electrically-conductive PPy-PCL, more cells were observed to have peripheral localization of the gap junction protein connexin-43 (Cx43) as compared to cells on NaOH-treated PCL (60.3 ± 4.3% vs. 46.6 ± 5.7%). Cx43 gene expression remained unchanged between materials. Importantly, the velocity of calcium wave propagation was faster and calcium transient duration was shorter for cardiomyocyte monolayers on PPy-PCL (1612 ± 143 μm/s, 910 ± 63 ms) relative to cells on PCL (1129 ± 247 μm/s, 1130 ± 20 ms). In summary, PPy-PCL has demonstrated suitability as an electrically-conductive substrate for culture of cardiomyocytes, yielding enhanced functional properties; results encourage further development of conductive substrates for use in differentiation of stem cell-derived cardiomyocytes and cardiac tissue engineering applications., Statement of Significance: Current conductive materials for use in cardiac regeneration are limited by cytotoxicity or cost in implementation. In this manuscript, we demonstrate for the first time the application of a biocompatible, conductive polypyrrole-polycaprolactone film as a platform for culturing cardiomyocytes for cardiac regeneration. This study shows that the novel conductive film is capable of enhancing cell-cell communication through the formation of connexin-43, leading to higher velocities for calcium wave propagation and reduced calcium transient durations among cultured cardiomyocyte monolayers. Furthermore, it was demonstrated that chemical modification of polycaprolactone through alkaline-mediated hydrolysis increased overall cardiomyocyte adhesion. The results of this study provide insight into how cardiomyocytes interact with conductive substrates and will inform future research efforts to enhance the functional properties of cardiomyocytes, which is critical for their use in pharmaceutical testing and cell therapy., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Objective: To isolate and characterize endothelial colony-forming cells (ECFCs; a subtype of endothelial progenitor cells) from peripheral blood samples of horses., Sample: Jugular venous blood samples from 24 adult horses., Procedures: Blood samples were cultured in endothelial cell growth medium. Isolated ECFCs were characterized by use of functional assays of fluorescence-labeled acetylated low-density lipoprotein (DiI-Ac-LDL) uptake and vascular tubule formation in vitro. Expression of endothelial (CD34, CD105, vascular endothelial growth factor receptor 2, and von Willebrand factor) and hematopoietic (CD14) cell markers was assessed through indirect immunofluorescence assay and flow cytometry. The number of passages before senescence was determined through serial evaluation of DiI-Ac-LDL uptake, vascular tubule formation, and cell doubling rates., Results: Samples from 3 horses produced colonies at 12 ± 2.5 days with characteristic endothelial single layer cobblestone morphology and substantial outgrowth on expansion. Equine ECFCs formed vascular tubules in vitro and had uptake of DiI-Ac-LDL (74.9 ± 14.7% positive cells). Tubule formation and DiI-Ac-LDL uptake diminished by passage 5. Equine ECFCs tested positive for von Willebrand factor, vascular endothelial growth factor receptor 2, CD34, and CD105 with an immunofluorescence assay and for CD14 and CD105 via flow cytometry., Conclusions and Clinical Relevance: ECFCs can be isolated from peripheral blood of horses and have characteristics similar to those described for other species. These cells may have potential therapeutic use in equine diseases associated with ischemia or delayed vascularization.

Mitochondrial dynamics play an important role in numerous physiological and pathophysiological phenomena in the developing and adult human heart. Alterations in structural aspects of cellular mitochondrial composition as a function of changes in physiology can easily be visualized using fluorescence microscopy. Commonly, mitochondrial location, number, and morphology are reported qualitatively due to the lack of automated and user-friendly computer-based analysis tools. Mitochondrial Quantification using MATLAB (MQM) is a computer-based tool to quantitatively assess these parameters by analyzing fluorescently labeled mitochondria within the cell; in particular, MQM provides numerical information on the number, area, and location of mitochondria within a cell in a time-efficient, automated, and unbiased way. This chapter describes the use of MQM's capabilities to quantify mitochondrial changes during human pluripotent stem cell (hPSC) differentiation into spontaneously contracting cardiomyocytes (SC-CMs), which follows physiological pathways of human heart development.

Numerous methods have been developed for the fabrication of poly(ethylene glycol)-based hydrogel microstructures for drug-delivery and tissue-engineering applications. However, present methods focus on the fabrication of submicrometer scale hydrogel structures which have limited applications in creating larger tissue constructs, especially in recreating cancer tissue microenvironments. We aimed to establish a platform where cancer cells can be cultured in a three-dimensional (3D) environment, which closely replicates the native cancer microenvironment and facilitates efficient testing of anticancer drugs. This study demonstrated a novel surface tension-based fabrication technique for the generation of millimeter-scale hydrogel beads using a liquid-liquid dual phase system. The "hydrogel millibeads" obtained by this method were larger than previously reported, highly uniform in shape and size with better ease of size control and a high degree of consistency and reproducibility between batches. In addition, human breast cancer cells were encapsulated within these hydrogel constructs to generate "tumor millibeads", which were subsequently maintained in long-term 3D culture. Microscopic visualization using fluorescence imaging and microstructure analysis showed the morphology and uniform distribution of the cells within the 3D matrix and arrangement of cells with the surrounding scaffold material. Cell viability analysis revealed the creation of a core region of dead cells surrounded by healthy, viable cell layers at the periphery following long-term culture. These observations closely matched with those of native and in vivo tumors. Based on these results, this study established a rapidly reproducible surface tension-based fabrication technique for making spherical hydrogel millibeads and demonstrated the potential of this method in creating engineered 3D tumor tissues. It is envisioned that the developed hydrogel millibead system will facilitate the formation of physiologically relevant in vitro tumor models which will closely simulate the native tumor microenvironmental conditions and could enable future high-throughput testing of different anticancer drugs in preclinical trials.

Cardiovascular disease is the leading cause of death worldwide. In the absence of sufficient numbers of organs for heart transplant, alternate approaches for healing or replacing diseased heart tissue are under investigation. Designing biomimetic materials to support these approaches will be essential to their overall success. Strategies for cardiac tissue engineering include injection of cells, implantation of three-dimensional tissue constructs or patches, injection of acellular materials, and replacement of valves. To replicate physiological function and facilitate engraftment into native tissue, materials used in these approaches should have properties that mimic those of the natural cardiac environment. Multiple aspects of the cardiac microenvironment have been emulated using biomimetic materials including delivery of bioactive factors, presentation of cell-specific adhesion sites, design of surface topography to guide tissue alignment and dictate cell shape, modulation of mechanical stiffness and electrical conductivity, and fabrication of three-dimensional structures to guide tissue formation and function. Biomaterials can be engineered to assist in stem cell expansion and differentiation, to protect cells during injection and facilitate their retention and survival in vivo, and to provide mechanical support and guidance for engineered tissue formation. Numerous studies have investigated the use of biomimetic materials for cardiac regeneration. Biomimetic material design will continue to exploit advances in nanotechnology to better recreate the cellular environment and advance cardiac regeneration. Overall, biomimetic materials are moving the field of cardiac regenerative medicine forward and promise to deliver new therapies in combating heart disease., (© 2013 Wiley Periodicals, Inc.)

This study investigated the dynamic adhesion of endothelial progenitor cells (EPCs) to peptide-grafted poly(ethylene glycol) diacrylate (PEGDA) hydrogels and determined the relative ability of RGDS, REDV and YIGSRG peptides to reduce the velocity of EPC rolling. Circulating EPCs are key mediators of endothelium repair and have been shown to accelerate re-endothelialization, which is important in reducing the incidence of restenosis following stent placement and occlusion of small diameter vascular grafts. However, to exploit these capabilities for tissue engineering applications, more knowledge is needed about EPC binding to the vascular wall under shear and, in particular, whether the incorporation of peptide ligands into biomaterials can support the process of EPC rolling or maintain EPC adhesion. This study specifically examined one type of EPCs endothelial colony forming cells (ECFCs), based on their ability to be expanded in culture and differentiate into mature endothelial cells. The amount of grafted PEG-peptide was shown to be dependent on the concentration of PEG-peptide grafting solution photopolymerized onto the hydrogel surface. The ECFC strength of adhesion on PEG-RDGS grafted hydrogels exceeded 350 dyn cm(-2) for 85% of adherent cells. PEG-RGDS grafted hydrogels supported ECFC rolling, whereas ECFC velocity on the negative control PEG-RGES grafted hydrogels and on the "blank slate" PEGDA hydrogels was substantially higher than the cutoff velocity for cell rolling. The ECFC rolling velocity on PEG-RDGS grafted hydrogels depended on the shear rate; as shear rate was increased from 20 s(-1) to 120 s(-1), ECFC rolling velocity increased from 103±3 μm s(-1) to 741±28 μm s(-1). REDV and YIGSRG, which are known to preferentially support endothelial cell adhesion, also supported ECFC rolling. Interestingly, the rolling velocity of ECFCs on PEG-REDV grafted hydrogels was significantly lower than on PEG-YIGSRG or on PEG-RGDS grafted hydrogels. Understanding the dynamic adhesion of ECFCs to peptide-grafted hydrogels is the first step towards understanding the similarities and differences of EPCs from mature endothelial cells and improving the ability to sequester EPCs to biomaterial surfaces in order to promote intravascular re-endothelialization., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

In this study, we characterized the electrophysiological benefits of engrafting human embryonic stem cell-derived cardiomyocytes (hESC-CMs) in a model of arrhythmogenic cardiac tissue. Using transforming growth factor-β treated monolayers of neonatal rat ventricular cells (NRVCs), which retain several key aspects of the healing infarct such as an excess of contractile myofibroblasts and slowed, heterogeneous conduction, we assessed the ability of hESC-CMs to improve conduction and prevent arrhythmias. Cells from beating embryoid bodies (hESC-CMs) can form functional monolayers which beat spontaneously and can be electrically stimulated, with mean action potential duration of 275 ± 36 ms and conduction velocity (CV) of 10.6 ± 4.2 cm/s (n = 3). These cells, or cells from non-beating embryoid bodies (hEBCs) were added to anisotropic, NRVC monolayers. Immunostaining demonstrated hESC-CM survival and engraftment, and dye transfer assays confirmed functional coupling between hESC-CMs and NRVCs. Conduction velocities significantly increased in anisotropic NRVC monolayers after engraftment of hESC-CMs (13.4 ± 0.9 cm/s, n = 35 vs. 30.1 ± 3.2 cm/s, n = 20 in the longitudinal direction and 4.3 ± 0.3 cm/s vs. 9.3 ± 0.9 cm/s in the transverse direction), but decreased to even lower values after engraftment of non-cardiac hEBCs (to 10.6 ± 1.3 cm/s and 3.1 ± 0.5 cm/s, n = 11, respectively). Furthermore, reentrant wave vulnerability in NRVC monolayers decreased by 20% after engraftment of hESC-CMs, but did not change with engraftment of hEBCs. Finally, the culture of hESC-CMs in transwell inserts, which prevents juxtacrine interactions, or engraftment with connexin43-silenced hESC-CMs provided no functional improvement to NRVC monolayers. These results demonstrate that hESC-CMs can reverse the slowing of conduction velocity, reduce the incidence of reentry, and augment impaired electrical propagation via gap junction coupling to host cardiomyocytes in this arrhythmogenic in vitro model., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

During differentiation, mouse embryonic stem cell-derived cardiomyocytes (mESC-CMs) receive electromechanical cues from spontaneous beating. Therefore, promoting electromechanical activity via electrical pacing or suppressing it by drug treatment might affect the cellular functional development. Electrical pacing was applied to confluent monolayers of mESC-CMs during late-stage differentiation (days 16-18). Alternatively, spontaneous contraction was suppressed by (a) blocking ion currents with CsCl (HCN channel), trazodone (T-type Ca 2+ channel), or both CsCl and trazodone on days 11-18; or (b) applying blebbistatin (excitation-contraction uncoupler) on days 11-14. Electrophysiological properties and gene expression were examined on day 19 and 18, respectively. Optical mapping revealed no significant difference in conduction velocity (CV)in paced vs. non-pacedmonolayers, nor were there significant changes in gene expression of connexin-43, Na-Ca exchanger (NCX), or myosin heavy chain (MHC). However, CV variability among differentiation batches and CV heterogeneity within individual monolayers were significantly lower in paced mESC-CMs. Alternatively, while the four drug treatments suppressed contraction with varying degrees (up to complete inhibition), there was no significant difference in CV for any of the treatments compared with controls. Trazodone treatment significantly reduced CV variability as compared to controls, whereas CsCl treatment significantly reduced CV heterogeneity. Distinct changes in gene expression of connexin-43, MHC, HCNl, Cav3.1/3.2 were not observed. Electrical pacing, but not suppression of spontaneous contraction, during late-stage differentiation reduces the intrinsic variability of CV among differentiation batches and across individual monolayers, which can be beneficial in the application of ESCs for myocardial tissue repair.

Heart tissue possesses complex structural organization on multiple scales, from macro- to nano-, but nanoscale control of cardiac function has not been extensively analyzed. Inspired by ultrastructural analysis of the native tissue, we constructed a scalable, nanotopographically controlled model of myocardium mimicking the in vivo ventricular organization. Guided by nanoscale mechanical cues provided by the underlying hydrogel, the tissue constructs displayed anisotropic action potential propagation and contractility characteristic of the native tissue. Surprisingly, cell geometry, action potential conduction velocity, and the expression of a cell-cell coupling protein were exquisitely sensitive to differences in the substratum nanoscale features of the surrounding extracellular matrix. We propose that controlling cell-material interactions on the nanoscale can stipulate structure and function on the tissue level and yield novel insights into in vivo tissue physiology, while providing materials for tissue repair.

The use of stem cells for cardiac regeneration is a revolutionary, emerging research area. For proper function as replacement tissue, stem cell-derived cardiomyocytes (SC-CMs) must electrically couple with the host cardiac tissue. Electrophysiological mapping techniques, including microelectrode array (MEA) and optical mapping, have been developed to study cardiomyocytes and cardiac cell monolayers, and these can be applied to study stem cells and SC-CMs. MEA recordings take extracellular measurements at numerous points across a small area of cell cultures and are used to assess electrical propagation during cell culture. Optical mapping uses fluorescent dyes to monitor electrophysiological changes in cells, most commonly transmembrane potential and intracellular calcium, and can be easily scaled to areas of different sizes. The materials and methods for MEA and optical mapping are presented here, together with detailed notes on their use, design, and fabrication. We also provide examples of voltage and calcium maps of mouse embryonic stem cell-derived cardiomyocytes (mESC-CMs), obtained in our laboratory using optical mapping techniques.

Basic fibroblast growth factor (bFGF), stored bound to heparan sulfate proteoglycans in the extracellular matrix (ECM) of the arterial media, may initiate smooth muscle cell (SMC) proliferation after coronary intervention, thus contributing to restenosis. bFGF mobilization from ECM stores after injury may be induced by platelet degranulation products such as heparanase. Therapies aimed at the inhibition of bFGF release and activation may assist in prevention of restenosis. To test this theory, we first examined the mobilization and activation of bFGF in the arterial media by platelet-derived heparanase. Heparanase, locally delivered to the rat carotid artery, was found to release bFGF and induce substantial SMC proliferation in the absence of actual vascular injury. An antibody that neutralizes heparanase was then developed and evaluated in a rat carotid balloon injury model. Local delivery of anti-heparanase IgG was found to inhibit bFGF release by approximately 60% ( p < 0.001) at 4 d; this correlated with the significant reduction in neointima formation observed at 14 d (intimal area/medial area: control 1.3 +/- 0.3, anti-heparanase 0.35 +/- 0.12, p < 0.0001). Platelet-derived heparanase is therefore likely to be important in initiating events leading to restenosis via bFGF mobilization. Furthermore, heparanase neutralization may assist in the prevention of restenosis following vascular injury.

Using novel nitric oxide (NO)-generating polymeric hydrogels that can be rapidly photopolymerized in situ, we can deliver NO locally at the site of vascular injury. Depending on material design, these poly(ethylene glycol) (PEG)-based hydrogels can generate NO for up to 50 d. This study demonstrates the ability of nitric oxide-generating hydrogels (PEG-Cys-NO) to influence key components of the restenosis cascade both in vitro and in vivo. PEG-Cys-NO hydrogels inhibited smooth muscle cell proliferation, increased endothelial cell proliferation, and inhibited platelet adhesion in vitro. Moreover, in vivo, PEG-Cys-NO hydrogels inhibited intimal thickening in a rat carotid balloon injury model. The perivascular application of NO-generating polymers post-injury reduced neointima formation at 14 d by approximately 80% compared to controls (intimal area/medial area (I/M): PEG-Cys-NO=0.20+/-0.17, control=0.84+/-0.19, p<0.00002; intimal thickness: PEG-Cys-NO=12+/-10 microm, control=60+/-18 microm, p<0.00002). Treatment with the PEG-Cys-NO hydrogels caused a significant decrease in the per cent of proliferating cell nuclear antigen positive medial cells (29+/-5%) at 4 d as compared to treatment with the control hydrogels (51+/-1%, p<0.02). Additionally, vessel re-endothelialization at 14 d was slightly enhanced in the presence of the NO-generating hydrogels. These data indicate that localized delivery of NO from these hydrogels can significantly inhibit neointima formation in a rat carotid balloon injury model and suggest that these materials may be useful in preventing restenosis.

This study evaluated the effects of localized delivery of nitric oxide (NO) from hydrogels covalently modified with S-nitrosocysteine (Cys-NO) on neoinitma formation, a key component of restenosis, in a rat balloon-injury model. Soluble Cys-NO was used in preliminary studies to identify dosage ranges that were able to simultaneously inhibit smooth muscle cell proliferation, enhance endothelial cell proliferation, and reduce platelet adhesion. Photo-cross-linked PEG-based hydrogels were formed with covalently immobilized Cys-NO. These materials release NO for approximately 24 h and can be applied to tissues and photo-cross-linked in situ to form local drug-delivery systems. Localized delivery of NO from hydrogels containing Cys-NO inhibited neointima formation in a rat balloon-injury model by approximately 75% at 14 days.

YC-1, a synthetic benzyl indazole derivative, is capable of stimulating endogenous vessel wall cyclic guanosine monophosphate (cGMP) production and attenuating the remodeling response to experimental arterial angioplasty. In an effort to investigate the mechanisms of this YC-1-mediated vasoprotection, we examined the influence of soluble YC-1 or YC-1 incorporated in a polyethylene glycol (PEG) hydrogel on cultured rat vascular smooth muscle cell (SMC) cGMP synthesis, SMC proliferation, and platelet function. Results demonstrate that soluble YC-1 stimulated SMC cGMP production in a dose-dependent fashion, while both soluble and hydrogel-released YC-1 inhibited vascular SMC proliferation in a dose-dependent fashion without effects on cell viability. Platelet aggregation and adherence to collagen were both significantly inhibited in a dose-dependent fashion by soluble and hydrogel-released YC-1. Arterial neointima formation following experimental balloon injury was significantly attenuated by perivascular hydrogel-released YC-1. These results suggest that YC-1 is a potent, physiologically active agent with major anti-proliferative and anti-platelet properties that may provide protection against vascular injury through cGMP-dependent mechanisms.