Search

Abrasive blasting is one of the methods of surface working before hot-dip zinc-coating. It allows not only to remove products of corrosion from the surface, but it also affects the quality of the zinc coating applied later, thereby affecting wettability of surface being zinc-coated. The surface working can be done with different types of abrasive material.

This paper presents a comparison of the deformations and residual stresses in gear wheels after vacuum carburizing process with quenching in high-pressure nitrogen and oil. The comparison was made on a medium-sized gear wheels, made of AMS6265 (AISI 9310) steel. This steel is applied in the aerospace industry for gears. The study has provided grounds for an assessment of the effect of the method of quenching on the size of deformations. Compared to oil quenching, high-pressure gas quenching following vacuum carburizing resulted in more uniform and smaller deformations.

This paper presents the findings of fatigue strength tests of 15CrNi6 steel following low-pressure carburizing and oil quenching, subjected to cycles of one-sided three-point bending. The fatigue fractures were compared with the results of fatigue strength studies of 16MnCr5 steel following low-pressure carburizing and nitrogen quenching. The fatigue tests for 16MnCr5 steel were conducted as part of a high-cycle resonance test, with a pendular bending load. The study also involved an analysis of the effects on non-metallic inclusions in the structure on the mechanism of fatigue destruction. The inclusions were found to initiate fatigue cracks. In both cases, a similar method of a fatigue fissure initiation was observed, independent of the study method or specimen material. [ABSTRACT FROM AUTHOR]

Competing Interests: Declaration of competing interest None

Residual stresses and anisotropic structures characterize laser powder bed fusion (L-PBF) products due to rapid thermal changes during fabrication, potentially leading to microcracking and lower strength. Post-heat treatments are crucial for enhancing mechanical properties. Numerous dental technology laboratories worldwide are adopting the new technologies but must invest considerable time and resources to refine them for specific requirements. Our research can assist researchers in identifying thermal processes that enhance the mechanical properties of dental Co-Cr alloys. In this study, high cooling rates (quenching) and annealing after quenching were evaluated for L-PBF Co-Cr dental alloys. Cast samples (standard manufacturing method) were tested as a second reference material. Tensile strength, Vickers hardness, microstructure characterization, and phase identification were performed. Significant differences were found among the L-PBF groups and the cast samples. The lowest tensile strength (707 MPa) and hardness (345 HV) were observed for cast Starbond COS. The highest mechanical properties (1389 MPa, 535 HV) were observed for the samples subjected to the water quenching and reheating methods. XRD analysis revealed that the face-centered cubic (FCC) and hexagonal close-packed (HCP) phases are influenced by the composition and heat treatment. Annealing after quenching improved the microstructure homogeneity and increased the HCP content. L-PBF techniques yielded superior mechanical properties compared to traditional casting methods, offering efficiency and precision. Future research should focus on fatigue properties.

➤ Despite being a social construct, race has an impact on outcomes in musculoskeletal spine care.➤ Race is associated with other social determinants of health that may predispose patients to worse outcomes.➤ The musculoskeletal spine literature is limited in its understanding of the causes of race-related outcome trends.➤ Efforts to mitigate race-related disparities in spine care require individual, institutional, and national initiatives., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H903 )., (Copyright © 2024 by The Journal of Bone and Joint Surgery, Incorporated.)

The study involved numerical FEA (finite element analysis) of dental implants. Based on this, fatigue tests were conducted according to the PN-EN 14801 standard required for the certification of dental products. Thanks to the research methodology developed by the authors, it was possible to conduct a thorough analysis of the impact of external and internal factors such as material, geometry, loading, and assembly of the dental system on the achieved value of fatigue strength limit in the examined object. For this purpose, FEM studies were based on identifying potential sites of fatigue crack initiation in reference to the results of the test conducted on a real model. The actions described in the study helped in the final evaluation of the dental system design process named by the manufacturer as INTEGRA OPTIMA 3.35. The objective of the research was to identify potential sites for fatigue crack initiation in a selected dental system built on the INTEGRA OPTIMA 3.35 set. The material used in the research was titanium grade 4. A map of reduced von Mises stresses was used to search for potential fatigue crack areas. The research [loading] was conducted on two mutually perpendicular planes positioned in such a way that the edge intersecting the planes coincided with the axis of the system. The research indicated that the connecting screw showed the least sensitivity (stress change) to the change in the loading plane, while the value of preload has a significant impact on the achieved fatigue strength of the system. In contrast, the endosteal implant (root) and the prosthetic connector showed the greatest sensitivity to the change in the loading plane. The method of mounting [securing] the endosteal implant using a holder, despite meeting the standards, may contribute to generating excessive stress concentration in the threaded part. Observation of the prosthetic connector in the Optima 3.35 system, cyclically loaded with a force of F ≈ 300 N in the area of the upper hexagonal peg, revealed a fatigue fracture. The observed change in stress peak in the dental connector for two different force application surfaces shows that the positioning of the dental system (setting of the socket in relation to the force action plane) is significantly decisive in estimating the limited fatigue strength.

This study aimed to evaluate internal tooth-filling interfaces of composite fillings made using universal adhesives using micro-computed tomography (µCT). Sixty class V cavities were randomly assigned into six groups: Peak Universal etch and rinse (PER), Peak Universal self-etch (PSE), Adhese Universal etch and rinse (AER), and Adhese Universal self-etch (ASE). Two further adhesives considered gold standards were used as control groups: OptiBond FL (OER) for the etch and rinse technique and Clearfil SE for the self-etch technique (CSE). All teeth were subjected to thermomechanical loading and four-year water storage. Next, they were analyzed using µCT to investigate the internal tooth-filling interfaces. The proportions between the gap volume (GV) at the tooth-filling interface and the volume of applied composite filling (FV), between the gap and cavity volumes (CV), and between the gap volumes at the tooth-filling interface of the external (EGV) and internal (IGV) parts were calculated. Adhese Universal achieved the significantly lowest gap-to-filling- and gap-to-cavity-volume ratios for both types of etching techniques comparing to those of the Peak Universal and control groups. Significant differences between the gaps in external and internal parts of the tooth-filling interface were only noted in the control groups. Internal gap formation and development at the tooth-filling interface depend on the material as well as the type of its application.

Study Design: Retrospective cohort study., Objective: Understand the benefit of addressing malalignment in revision surgery for proximal junctional kyphosis (PJK)., Summary of Background Data: PJK is a common cause of revision surgery for adult spinal deformity patients. During a revision, surgeons may elect to perform a proximal extension of the fusion, or also correct the source of the lumbopelvic mismatch., Materials and Methods: Recurrent PJK following revision surgery was the primary outcome. Revision surgical strategy was the primary predictor (proximal extension of fusion alone compared with combined sagittal correction and proximal extension). Multivariable logistic regression determined rates of recurrent PJK between the two surgical groups with lumbopelvic surgical correction assessed through improving ideal alignment in one or more alignment criteria [Global Alignment and Proportionality (GAP), Roussouly-type, and Sagittal Age-Adjusted Score (SAAS)]., Results: A total of 151 patients underwent revision surgery for PJK. PJK occurred at a rate of 43.0%, and PJF at 12.6%. Patients proportioned in GAP postrevision had lower rates of recurrent PJK [23% vs. 42%; odds ratio (OR): 0.3, 95% confidence interval (CI): 0.1-0.8, P =0.024]. Following adjusted analysis, patients who were ideally aligned in one of three criteria (Matching in SAAS and/or Roussouly matched and/or achieved GAP proportionality) had lower rates of recurrent PJK (36% vs. 53%; OR: 0.4, 95% CI: 0.1-0.9, P =0.035) and recurrent PJF (OR: 0.1, 95% CI: 0.02-0.7, P =0.015). Patients ideally aligned in two of three criteria avoid any development of PJF (0% vs. 16%, P <0.001)., Conclusions: Following revision surgery for PJK, patients with persistent poor sagittal alignment showed increased rates of recurrent PJK compared with patients who had abnormal lumbopelvic alignment corrected during the revision. These findings suggest addressing the root cause of surgical failure in addition to proximal extension of the fusion may be beneficial., Competing Interests: The authors report no conflicts of interest., (Copyright © 2022 Wolters Kluwer Health, Inc. All rights reserved.)

Introduction: Some patients, particularly those who are socioeconomically deprived, are diagnosed with primary and/or metastatic cancer only after presenting to the emergency department. Our objective was to determine sociodemographic characteristics of patients undergoing surgery for metastatic spine disease at our institution., Methods: This retrospective case series included patients 18 years and older who presented to the emergency department with metastatic spine disease requiring surgery. Demographics and survival data were collected. Sociodemographic characteristics were estimated using the Social Deprivation Index (SDI) and Area Deprivation Index (ADI) for the state of California. Univariate log-rank tests and Kaplan-Meier curves were used to assess differences in survival for predictors of interest., Results: Between 2015 and 2021, 64 patients underwent surgery for metastatic disease of the spine. The mean age was 61.0 ± 12.5 years, with 60.9% being male (n = 39). In this cohort, 89.1% of patients were non-Hispanic (n = 57), 71.9% were White (n = 46), and 62.5% were insured by Medicare/Medicaid (n = 40). The mean SDI and ADI were 61.5 ± 28.0 and 7.7 ± 2.2, respectively. 28.1% of patients (n = 18) were diagnosed with primary cancer for the first time while 39.1% of patients (n = 25) were diagnosed with metastatic cancer for the first time. During index hospitalization, 37.5% of patients (n = 24) received palliative care consult. The 3-month, 6-month, and all-time mortality rates were 26.7% (n = 17), 39.5% (n = 23), and 50% (n = 32), respectively, with 10.9% of patients (n = 7) dying during their admission. Payor plan was significant at 3 months ( P = 0.02), and palliative consultation was significant at 3 months ( P = 0.007) and 6 months ( P = 0.03). No notable association was observed with SDI and ADI in quantiles or as continuous variables., Discussion: In this study, 28.1% of patients were diagnosed with cancer for the first time. Three-month and 6-month mortality rates for patients undergoing surgery were 26.7% and 39.5%, respectively. Furthermore, mortality was markedly associated with palliative care consultation and insurance status, but not with SDI and ADI., Level of Evidence: Retrospective case series, Level III evidence., Competing Interests: Disclosures: Every author involved denies any conflicts of interest with respect to the synthesis of the proposed manuscript., (Copyright © 2023 by the American Academy of Orthopaedic Surgeons.)

The aim of this study was to evaluate gap formation after using two universal adhesives, Peak Universal Bond (P), which contains chlorhexidine and Adhese Universal (A), which contains 10-MDP monomer, and to compare them with two gold standard adhesives. The adhesives were tested in different etching modes, etch-and-rinse (ER) or self-etch (SE), and under thermomechanical loading (TML). Two identical Class V cavities were prepared in each of 30 human third molar teeth, and resin-composite restorations were made. Before and after TML, replicas of the restorations were prepared. Gap formation and their frequency according to the modified classification of Blunck and Zaslansky and the width of the maximum marginal gap (MG) were separately evaluated in enamel and dentin. Gap frequency did not differ significantly only in the enamel before TML, despite the use of different adhesives or etching modes. At both timepoints, the highest MG values were obtained with the Peak Universal Bond self-etch (PSE) group in enamel (6.2 μm before TML, 12.2 μm after TML) and the Peak Universal Bond etch-and-rinse (PER) group in dentine (21.3 μm before TML, 35.5 μm after TML). After TML, there was a significant increase of gap frequency for Adhese universal self-etch (ASE) group and MG values for PER, PSE, ASE groups at the resin-enamel interface, and gap frequency and MG values for all groups at the resin-dentin interface. Universal adhesive with 10-MDP monomer have beneficial effect on the resin-dentin interface, while chlorhexidine may reduce the resistance of the universal adhesive system to oral cavity conditions., (© 2019 Wiley Periodicals, Inc.)

The effect of tamoxifen (TAM), lanreotide (LAN) and 5-fluorouracil (5-FU), given separately or together, on p65 gene expression in murine Colon 38 cancer was investigated by RT-PCR method. The findings were compared with cell proliferation determined by bromodeoxyuridine (BrdU) labeling index, apoptosis visualized by TUNEL method and tumor mass. It was found that in the control group (mice bearing colon cancer without treatment) the expression of p65 gene was present in 57% of investigated samples. In the groups treated with TAM or LAN p65 gene expression was detected in 87.5% and 83.3% of analyzed cases, respectively. Both these substances increased apoptotic index in Colon 38 cancer and LAN also decreased the proliferation index. After a combined treatment with TAM and LAN a percentage of p65 positive cases was similar to that of the control group and equaled approximately 60%. This treatment did not increase proapoptotic effects of these drugs, and even reduced the antiproliferogenic effect of LAN. In the group treated with 5-FU and LAN p65 gene expression was also close to the control value (about 66%). Similarly in this group the combined treatment with these two drugs did not cause any favorable effect on proliferation and apoptosis. Moreover, in this group even reduced antiproliferogenic effect of LAN was observed. In the group with 5-FU alone the expression of p65 was present in about 80% of samples. The treatment with 5-FU increased apoptotic index and did not change proliferation. In the group treated with a combination of TAM and 5-FU all analyzed cases showed the presence of p65 gene expression. Previously, we observed in this group the most pronounced and synergistic effect of these substances on the inhibition of cell proliferation and tumor mass reduction. Based on these findings we conclude that p65 gene expression in murine Colon 38 cancer tissues can be modulated via chemotherapy (5-FU) and also via hormonal modulation (TAM and LAN).

There is accumulating laboratory evidence that magnetic fields can affect a variety of opioid-mediated behavioral and physiological functions in both vertebrates and invertebrates. The present study examined the effects of various durations (0.50, 1.0 and 2.0 h) of exposure to a low intensity (1.0 gauss rms) 60-Hz magnetic field on opioid-mediated aversive thermal ("nociceptive") responses and morphine-induced "analgesia" in the land snail, Cepaea nemoralis, under natural environmental conditions. Exposure to the powerline-related 60-Hz magnetic fields significantly attenuated morphine-induced analgesia and the basal nociceptive responses of Cepaea, with the degree of attenuation being related to the duration of exposure to the magnetic fields. These results with Cepaea show that 60-Hz magnetic fields can affect opioid-mediated behavioral responses outside the laboratory under natural environmental conditions.

The effects of various durations (0.5, 2, 12, 48, or 120 h) of day- and night-time exposures to a 1.0 gauss (rms) 60-Hz magnetic field or sham field on mortality levels in the nocturnally-crepuscularly active land snail, Cepaea nemoralis, were examined. These snails were injected with morphine or saline vehicle and tested for reaction to an aversive thermal stimulus as part of another study. Mortality levels were monitored over a 2-week period following the initial exposure to the fields and were shown not to be differentially affected by the drug injection procedures. Mortality levels increased linearly as a function of increased length of exposure to the magnetic fields (P less than 0.001) but not when exposed to the sham fields. As well, night-time exposures resulted in greater mortality levels than day-time exposures (P less than 0.025). These results indicate that day-night rhythms are important in determining the magnitude of the magnetic field exposure effect. It is speculated that the magnetic fields may disrupt endogenous opioid- and calcium-modulated homeostatic mechanisms and augment stress effects, modifying a variety of systems including immunocompetence.

There is accumulating evidence that magnetic fields can affect a variety of opioid-mediated behavioral and physiological functions. The present experiments were designed to examine the effects of various durations of day- and night-time exposures to low intensity (1.0 gauss rms) 60 Hz magnetic fields on light (L) and dark (D) period opioid-mediated aversive thermal ('nociceptive') responses and morphine-induced 'analgesia' in the nocturnally-crepuscularly active land snail, Cepaea nemoralis. The snails displayed a LD rhythm in the latency of their aversive (40 degrees C) thermal (nociceptive) responses, showing a significantly greater response latency at night than during the day. Administration of morphine (10 mg/kg/2.0 microliters) elicited significant increases in the thermal response latencies indicative of the induction of analgesia. The snails displayed a significantly greater analgesic response at night than during the day. Exposure (0.50, 2, 12, 48 or 120 h in L or D) to the 60 Hz fields reduced morphine-induced analgesia in both the L and D periods, with the magnetic stimuli having significantly greater inhibitory effects in the D period. The magnetic fields also significantly attenuated the level of the dark period basal nociceptive response latencies, while not affecting the light period responses. In both the L and D periods the degree of attenuation of the analgesic and nociceptive response latencies was related to the duration of exposure to the 60 Hz magnetic fields.(ABSTRACT TRUNCATED AT 250 WORDS)

We examined the effects of intraperitoneal administrations of the noncompetitive NMDA receptor antagonist, (+) MK-801, its inactive enantiomer, (-) MK-801, and the prototypic opiate antagonist, naloxone, on restraint- and morphine-induced analgesia in male and female deer mice, Peromyscus maniculatus. Both restraint (30 min) and morphine (1.0 mg/kg) induced significant analgesic responses with male mice displaying significantly greater levels of opioid-induced analgesia than female animals. These analgesic responses were completely blocked by, naloxone (1.0 mg/kg), significantly reduced by (+) MK-801 (0.25 mg/kg) and unaffected by (-) MK-801 (0.25 mg/kg) pretreatments. There were significant male-female differences in the inhibitory effects of (+) MK-801; the higher levels of morphine- and restraint-induced analgesia of the males were completely blocked, while the lower level analgesic responses of the females were significantly reduced, but not blocked, by (+) MK-801. These observations provide further evidence that NMDA receptors are involved in the mediation of endogenous and exogenous opioid analgesia and show that there are significant male-female differences in the inhibitory effects of (+) MK-801 on opioid-mediated analgesia.

The effects of body rotation in a horizontal plane and various opiate antagonists on the nociceptive responses of a day-active microtine rodent, the meadow vole, Microtus pennsylvanicus, were examined. Intermittent rotation (70 rpm, schedule of 30 sec on, 30 sec off) for 30 min induced significant analgesic responses in the voles for 15 min after rotation. These increases in thermal response latency were blocked by intraperitoneal pretreatment with either naloxone or the irreversible mu opiate receptor antagonist beta-funaltrexamine (beta-FNA; 10 mg/kg; 24 hr pretreatment). This antagonistic effect of beta-FNA indicates mu opioid involvement in the mediation of rotation-induced analgesia. The antiopiate peptides MIF-1 (Pro-Leu-Gly-NH2) and Tyr-MIF-1 also significantly reduced, though did not completely block, body rotation-induced opiate analgesia. This suggests that Tyr-MIF-1 and MIF-1 have significant antagonistic effects on mu opioid systems that are involved in the mediation of stress (rotation)-induced analgesia.