Search

Promoting pro-environmental behavior faces multiple challenges. Promoting new pro-environmental behaviors is even more challenging, due to additional barriers, such as perceived lack of information. Traditional pro-environmental communication often either encourages desired behaviors or discourages undesired behaviors. We argue that separately, these two approaches are limited in their ability to elicit perceptions of informativeness and therefore they may not be effective enough in the context of new pro-environmental behaviors, because of the profound need in educating the public about these new behaviors. Addressing this challenge, we test across six studies the effectiveness of a communication approach based on education psychology (specifically the “behavior reorientation” approach), which combines the encouraging and the discouraging language in a single integrated message. In three large field experiments and a field survey we find that, compared with communication that uses separately an encouraging or a discouraging message, a combined message that integrates both approaches elicits higher engagement with new pro-environmental behaviors. Three follow-up online studies demonstrate that the effect of the combined message occurs only in the context of new (rather than established) pro-environmental behaviors, and show the mediating role of perceived informativeness, echoing the need for education in such contexts.

A Cubist model for hospital Length of Stay (LOS) is proposed.The groups of cases covered by the Cubist rules differ in their characteristics.The LOS primarily depends on historical variables such as number of admissions.Applying CARMA algorithm allows discovery of important relations among variables.A method to separate the cases by their level of Cubist error. A model that accurately predicts, at the time of admission, the Length of Stay (LOS) for hospitalized patients could be an effective tool for healthcare providers. It could enable early interventions to prevent complications, enabling more efficient utilization of manpower and facilities in hospitals. In this study, we apply a regression tree (Cubist) model for predicting the LOS, based on static inputs, that is, values that are known at the time of admission and that do not change during patient's hospital stay. The model was trained and validated on de-identified administrative data from the Veterans Health Administration (VHA) hospitals in Pittsburgh, PA. We chose to use a Cubist model because it produced more accurate predictions than did alternative techniques. In addition, tree models enable us to examine the classification rules learned from the data, in order to better understand the factors that are most correlated with hospital LOS. Cubist recursively partitions the data set as it estimates linear regressions for each partition, and the error level differs for different partitions, so that it is possible to deduce what are the characteristics of patients whose LOS can be accurately predicted at admission, and what are the characteristics of patients for whom the LOS estimate at that point in time is more highly uncertain. For example, our model indicates that the prediction error is greater for patients who had more admissions in the recent past, and for those who had longer previous hospital stays. Our approach suggests that mapping the cases into a higher dimensional space, using a Radial Basis Function (RBF) kernel, helps to separate them by their level of Cubist error, using a Support Vector Machine (SVM).

The hospital length-of-stay (LOS), and the time between a discharge and the next admission, are important measures of healthcare utilization, and are generally positively skewed. We model the state transitions of CHF patients, using data from the Veterans Health Administration (VHA), by fitting a Coxian phase-type distribution to their LOS data, and extract the associated states in the latent Markov process. Selecting an appropriate number of phases helps to account for some heterogeneity among different LOS groups within the hospital, and provides a way to interpret each added covariate. By analyzing the strength of the connections among patient social, clinical, and historical characteristics within each group, the associated readmission risk may be estimated. For example, we found that groups with a greater LOS tended to have a greater proportion of patients from nursing home care. Nursing home care patients, who belong to the greater LOS group, tended to have a decreased readmission risk. Thus, by inc...

Recent developments in the field of fluorescence lifetime imaging microscopy (FLIM) techniques allow the use of high repetition rate light sources in live cell experiments. For light sources with a repetition rate of 20-100 MHz, the time-correlated single photon counting (TCSPC) FLIM systems suffer serious dead time related distortions, known as "inter-pulse pile-up". The objective of this paper is to present a new method to quantify the level of signal distortion in TCSPC FLIM experiments, in order to determine the most efficient laser repetition rate for different FLT ranges. Optimization of the F -value, which is the relation between the relative standard deviation (RSD) in the measured FLT to the RSD in the measured fluorescence intensity (FI), allows quantification of the level of FI signal distortion, as well as determination of the correct FLT of the measurement. It is shown that by using a very high repetition rate (80 MHz) for samples characterized by high real FLT's (4-5 ns), virtual short FLT components are added to the FLT histogram while a F -value that is higher than 1 is obtained. For samples characterized with short real FLT's, virtual long FLT components are added to the FLT histogram with the lower repetition rate (20-50 MHz), while by using a higher repetition rate (80 MHz) the "inter-pulse pile-up" is eliminated as the F -value is close to 1.

Fluorescence lifetime imaging microscopy (FLIM) is an essential tool in many scientific fields such as biology and medicine thanks to the known advantages of the fluorescence lifetime (FLT) over the classical fluorescence intensity (FI). However, the frequency domain (FD) FLIM technique suffers from its strong dependence on the reference and its compliance to the sample. In this paper, we suggest a new way to calculate the FLT by using the crossing point (CRPO) between the modulation and phase FLTs measured over several light emitting diode (LED) DC currents values instead of either method alone. This new technique was validated by measuring homogeneous substances with known FLT, where the CRPO appears to be the optimal measuring point. Furthermore, the CRPO method was applied in heterogeneous samples. It was found that the CRPO in known mixed solutions is the weighted average of the used solutions. While measuring B16 and lymphocyte cells, the CRPO of the DAPI compound in single FLT regions was measured at 3.5 ± 0.06 ns and at 2.83 ± 0.07 ns, respectively, both of which match previous reports and multi-frequency analyses. This paper suggests the CRPO as a new method to extract the FLT in problematic cases such as high MCP gains and heterogeneous environments. In traditional FD FLIM measurements, the variation in phase angle and modulation are measured. By measuring over varying DC currents, another variation is detected in the FLT determined through the phase and modulation methods, with the CRPO indicating the true FLT.

A1 Introduction to the 8th Annual Conference on the Science of Dissemination and Implementation: Optimizing Personal and Population Health David Chambers1, Lisa Simpson2 1Division of Cancer Control and Population Sciences, National Cancer Institute, National Institutes of Health, Rockville, MD, 20850, USA; 2AcademyHealth, Washington, DC, 20036, USA For the second year in a row, we are pleased to be able to share the proceedings of the Annual Conference on the Science of Dissemination and Implementation in Health, a large meeting reflecting the expanding and evolving research field that seeks to optimize the use of evidence, interventions, and tools from health research within the myriad of settings where people receive health care, make health-related decisions, and increase knowledge of influences on the health of the population. We once again benefitted from a strong partnership, co-led by AcademyHealth and the National Institutes of Health (NIH), with co-sponsorship from the Agency for Healthcare Research and Quality (AHRQ), the Patient Centered Outcomes Research Institute (PCORI), the Robert Wood Johnson Foundation (RWJF), the US Department of Veterans Affairs (VA), and the WT Grant Foundation. In addition, we benefitted from the collaboration of staff from the Centers for Disease Control and Prevention (CDC) and the World Health Organization (WHO). NIH and AcademyHealth again co-led the program planning committee, which focused on the development of the plenary sessions, and convened a scientific advisory panel to suggest speakers and advise on the overall conference development. The planning committee identified four key areas around which to focus the plenary panels and keynote address. Dr. America Bracho, M.D., M.P.H., Executive Director of Latino Health Access in Orange County, California, spoke about the opportunities for implementation science to inform efforts to improve community health and engage underserved populations. The three plenary panels each focused on a significant future direction for dissemination and implementation (D & I) research: the interface between D&I science and population health, emerging opportunities for global implementation science, and the challenges around implementation of precision medicine. The plenary sessions were complemented by facilitated lunchtime discussions on the same three topics, which offered participants an opportunity to identify key research questions for each and brainstorm next steps. Synopses of the lunchtime discussions are included in this supplement. Given the overwhelming success of the 2014 conference and the large number of abstracts received in 2014 (660), the program planning committee identified eight program tracks for abstract submitters to respond to, and through which the concurrent sessions of the conference would be organized. These tracks—Behavioral Health, Big Data and Technology for Dissemination and Implementation Research, Clinical Care Settings, Global Dissemination and Implementation, Promoting Health Equity and Eliminating Disparities, Health Policy Dissemination and Implementation, Prevention and Public Health, and Models, Measures and Methods— were designed to enable conference participants to follow a consistent theme across the multiple sessions of the conference and form the structure of this supplement. The call for abstracts, including individual paper presentations, individual posters and panel presentations, resulted in 515 submissions, spread across the eight thematic tracks. Over one hundred reviewers devoted their time to ensuring a comprehensive and expert review, and reviews were conducted within each track and coordinated by the track leads. For the final program, 64 oral presentations, 12 panels, and 263 posters were presented over the two-day meeting. Slides for the oral presentations and panels (with the agreement of the authors) were posted on the conference website (http://diconference.academyhealth.org/archives/2015archives) and all abstracts were included on the conference webapp (https://academyhealth.confex.com/academyhealth/2015di/meetingapp.cgi). This supplement has compiled the abstracts for presented papers, panel sessions, and lunchtime discussions from the 8th Annual Meeting on the Science of Dissemination and Implementation in Health: Optimizing Personal and Population Health. We are pleased to have the abstracts from the conference together in one volume once again, and look forward to the 9th Annual meeting, scheduled for December in Washington, D.C.

Functionals of Brownian motion have diverse applications in physics, mathematics, and other fields. The probability density function (PDF) of Brownian functionals satisfies the Feynman-Kac formula, which is a Schrodinger equation in imaginary time. In recent years there is a growing interest in particular functionals of non-Brownian motion, or anomalous diffusion, but no equation existed for their PDF. Here, we derive a fractional generalization of the Feynman-Kac equation for functionals of anomalous paths based on sub-diffusive continuous-time random walk. We also derive a backward equation and a generalization to Levy flights. Solutions are presented for a wide number of applications including the occupation time in half space and in an interval, the first passage time, the maximal displacement, and the hitting probability. We briefly discuss other fractional Schrodinger equations that recently appeared in the literature., 25 pages, 4 figures

Recent developments in the field of fluorescence lifetime imaging microscopy (FLIM) techniques allow the use of high repetition rate light sources in live cell experiments. For light sources with a repetition rate of 20-100 MHz, the time-correlated single photon counting (TCSPC) FLIM systems suffer serious dead time related distortions, known as "inter-pulse pile-up". The objective of this paper is to present a new method to quantify the level of signal distortion in TCSPC FLIM experiments, in order to determine the most efficient laser repetition rate for different FLT ranges. Optimization of the F -value, which is the relation between the relative standard deviation (RSD) in the measured FLT to the RSD in the measured fluorescence intensity (FI), allows quantification of the level of FI signal distortion, as well as determination of the correct FLT of the measurement. It is shown that by using a very high repetition rate (80 MHz) for samples characterized by high real FLT's (4-5 ns), virtual short FLT components are added to the FLT histogram while a F -value that is higher than 1 is obtained. For samples characterized with short real FLT's, virtual long FLT components are added to the FLT histogram with the lower repetition rate (20-50 MHz), while by using a higher repetition rate (80 MHz) the "inter-pulse pile-up" is eliminated as the F -value is close to 1.

In fluorescence fluctuation polarization sensitive experiments, the limitations associated with detecting the rotational timescale are usually eliminated by applying fluorescence correlation spectroscopy analysis. In this paper, the variance of the time-averaged fluorescence intensity extracted from the second moment of the measured fluorescence intensity is analyzed in the short time limit, before fluctuations resulting from rotational diffusion average out. Since rotational correlation times of fluorescence molecules are typically much lower than the temporal resolution of the system, independently of the time bins used, averaging over an ensemble of time-averaged trajectories was performed in order to construct the time-averaged intensity distribution, thus improving the signal-to-noise ratio. Rotational correlation times of fluorescein molecules in different viscosities of the medium within the range of the anti-bunching time (1-10 ns) were then extracted using this method.

In order to maximize the signal-to-noise ratio for a given temporal-resolution of typical photon counting single-molecule polarization-sensitive system, this talk suggests examining the rate of convergence and the variance of the time-averaged measured fluorescence intensity.

A general framework to include fluctuations in the single molecule fluorescence intensity (FI) signal due to random changes in molecule dipole orientation was introduced at Optics Express (21, 2007). By assuming continuous changes in dipole orientation described by Brownian rotational diffusion, this research derives the probability density function (PDF) equation of FI fluctuations. Solution of the proposed equation for several limiting cases and different correlation times yields the short time behavior of FI fluctuations. Monte Carlo simulations results, in accordance with those found in theory will be presented during our talk.

In the present study we introduce a Whole-Object Fluorescence Life Time (wo-FLT) measurement approach for ease and a relatively inexpensive method of tracing alterations in intracellular fluorophore distribution and in the physical-chemical features of the microenvironments hosting the fluorophore. Two common fluorophores, Rhodamine 123 and Acridine Orange, were used to stain U937 cells which were incubated, with and without either Carbonyl cyanide 3-chlorphenylhydrazon or the apoptosis inducer H(2)O(2). The wo-FLT, which is a non-imaging quantitative measurement, was able to detect several fluorescence decay components and corresponding weights in a single cell resolution. Following cell treatment, both decay time and weight were altered. Results suggest that the prominent factor responsible for these alterations and in some cases to a shift in emission spectrum as well, is the intracellular fluorophore local concentration. In this study it was demonstrated that the proposed wo-FLT method is superior to color fluorescence based imaging in cases where the emission spectrum of a fluorophore remains unchanged during the investigated process. The proposed wo-FLT approach may be of particular importance when direct imaging is impossible.

We derive backward and forward fractional Feynman-Kac equations for the distribution of functionals of the path of a particle undergoing anomalous diffusion. Fractional substantial derivatives introduced by Friedrich and co-workers [Phys. Rev. Lett. 96, 230601 (2006)10.1103/PhysRevLett.96.230601] provide the correct fractional framework for the problem. For applications, we calculate the distribution of occupation times in half space and show how the statistics of anomalous functionals is related to weak ergodicity breaking.