302 results on '"Lion, Alexander"'
Search Results
2. Material Modeling of Selective Laser Sintered Polyamid 12 for the Deviatoric Stress State
3. Investigation of the Mechanical Properties of Polymer Interfaces in Fused Filament Fabrication Under Uniaxial Tensile Testing
4. Diffusion Behavior of Pyrolysis Oil from Used Tires in Nitrile Butadiene Rubber
5. Electrical Induced Debonding on Demand of Adhesive Joints for the Automotive Industry
6. A Constitutive Model of Finite Viscoelasticity for Polyamide 6 Considering Degree of Crystallinity
7. Influence of Antiozonants on the Evolution of Crack Depth in Natural Rubber
8. Elastomeric Engine Mounts – Numerical Studies for E-Mobility Applications
9. A Model for Thermal Ageing of Elastomers: Parameter Identification Using Continuous Relaxation and Intermittent Uniaxial Tests
10. Sorption Mechanisms of Oils and Fuels in Thermoplastic Polyurethanes
11. A Constitutive Approach to Represent the Influence of Ageing on the Dynamic Mechanical Properties of Polymers
12. Comparison of the perception of damaged rear axle tie rods in the real vehicle and in the dynamic driving simulator based on subjective and physiological data
13. A thermo-mechanically coupled constitutive model for semi-crystalline polymers at finite strains: Mechanical and thermal characterization of polyamide 6 blends
14. Development and Validation of a Process Chain for a Real-Time Capable Simulation of a Vehicle with a Cracked Rear Axle Tie Rod
15. Selective Laser Sintered Pipe Specimen Under Torsional Load: Experimental Investigations and Material Modeling
16. Investigation of the Anisotropic Mechanical Behaviour of Short Carbon Fibre-Reinforced Polyamide 6 Fabricated via Fused Filament Fabrication
17. The Importance of Heat Conduction and Global Temperature Fields in the Laser Powder Bed Fusion Process
18. Crack Evaluation of Ozone-Aged Elastomers
19. Sorption of Fuels in Additively Manufactured Thermoplastic Polyurethanes
20. From Raw Data to Master Curve - Improving the Time-Temperature Superposition Process Using Geometrical Properties of Temperature-Frequency Sweeps
21. Characterization of crystallization kinetics in Polyamide 6 with a focus on modeling the thermoforming process: experiments, modeling, simulations
22. Analytical investigation of the finite viscoelastic model proposed by Simo: critical review and a suggested modification
23. Thermal analysis and shrinkage characterization of the photopolymers for DLP additive manufacturing processes
24. Viscoelastic behavior of filled silicone elastomers and influence of aging in inert and hermetic environment
25. Experimental investigation and micromechanical analysis of glass fiber reinforced polyamide 6
26. Multiparametric Design Optimisation of 3D Printed Aircraft Door Seals
27. Curing-dependent thermo-viscoelastic and shrinkage behaviour of photopolymers
28. FT-IR Microscopic Analysis of the Chemical Change in the Molecular Structure After Ozone Ageing of Natural Rubber
29. A Strategy to Extend the Limits of Unsupported Printing in Laser Powder Bed Fusion by Optimized Process Parameters Selection
30. An Overview on the 3D Printing of Elastomers and the Influence of Printing Parameters on Their Mechanical Properties
31. Long-Term Storage of Aged NBR in Kerosene in Consideration of Long Material Service Life
32. Design of a Room-in-Room Laboratory Environment for the SLS Printing Process
33. Thermoforming: Identification of Process-Relevant Ranges for Strain, Strain Rate, Cooling Rate, and Degree of Crystallinity Through Preliminary Simulations
34. On the Influence of Perimeter, Infill-Direction and Geometry on the Tensile Properties of Test Specimen Manufactured by Fused Filament Fabrication
35. Chemical–Mechanical Characterization of Unaged and Aged Additively Manufactured Elastomers
36. Ozone ageing: experimental methods on pristine and protected natural rubber
37. Virtual operational strength analysis for commercial vehicles
38. Multiparametric Design Optimisation of 3D Printed Aircraft Door Seals
39. Development of a Variable Torque Distribution for Fully Electric and Hybrid Heavy-duty Trucks based on a Modular Simulation Methodology
40. Strain-induced crystallisation in natural rubber: a thermodynamically consistent model of the material behaviour using a serial connection of phases
41. Numerical studies on the self-heating phenomenon of elastomers based on finite thermoviscoelasticity
42. A contribution to the chemomechanics of elastomers surrounded by liquid media: continuum mechanical approach for parameter identification using the example of sorption experiments
43. Experimental analysis and modelling of temperature- and humidity-controlled curing
44. Exploring the Satisfaction Potential of Technical Boundary Resources in IoT Platforms - The Microsoft Azure Case.
45. On the Derivation and Application of a Finite Strain Thermo-viscoelastic Material Model for Rubber Components
46. Modelling and simulation of acrylic bone cement injection and curing within the framework of vertebroplasty
47. Design of the novel tensile creep experimental setup, characterisation and description of the long-term creep performance of polycarbonate
48. Accelerating environmental ageing effects of adhesively bonded aluminium joints by using smaller bonding areas.
49. Thermomechanical characterization and modeling of fast-curing polyurethane adhesives
50. Strain-induced crystallisation in natural rubber: a thermodynamically consistent model of the material behaviour using a multiphase approach
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.