Search

Phase-shifting electron holography is an excellent method to reveal electron wave phase information with very high phase sensitivity over a large range of spatial frequencies. It circumvents the limiting trade-off between fringe spacing and visibility of standard off-axis holography. Previous implementations have been limited by the independent drift of biprism and sample. We demonstrate here an advanced drift correction scheme for the hologram series that exploits the presence of an interface of the TEM specimen to the vacuum area in the hologram. It allows to obtain reliable phase information up to 2{\pi}/452 at the 1 {\AA} information limit of the Titan 80-300 kV environmental transmission electron microscope used, by applying a moderate voltage of 250 V to a single biprism for a fringe spacing of 1 {\AA}. The obtained phase and amplitude information is validated at a thin Pt sample by use of multislice image simulation with the frozen lattice approximation and shows excellent agreement. The presented method is applicable in any TEM equipped with at least one electron biprism and thus enables achieving high resolution off-axis holography in various instruments including those for in-situ applications. A software implementation for the acquisition, calibration and reconstruction is provided., Comment: Text changes and clarifications from the revision process. Added SI to the PDF

HEV is a low-cost, versatile, high-quality ventilator, which has been designed in response to the COVID-19 pandemic. The ventilator is intended to be used both in and out of hospital intensive care units, and for both invasive and non-invasive ventilation. The hardware can be complemented with an external turbine for use in regions where compressed air supplies are not reliably available. The standard modes provided include PC-A/C(Pressure Assist Control),PC-A/C-PRVC(Pressure Regulated Volume Control), PC-PSV (Pressure Support Ventilation) and CPAP (Continuous Positive airway pressure). HEV is designed to support remote training and post market surveillance via a web interface and data logging to complement the standard touch screen operation, making it suitable for a wide range of geographical deployment. The HEV design places emphasis on the quality of the pressure curves and the reactivity of the trigger, delivering a global performance which will be applicable to ventilator needs beyond theCOVID-19 pandemic. This article describes the conceptual design and presents the prototype units together with their performance evaluation., Comment: 34 pages, 18 figures, Extended version of the article submitted to PNAS

We investigate magnetization dynamics in asymmetric interlayer exchange coupled Py/Ru/Py trilayers using both vector network analyzer-based and electrically detected ferromagnetic resonance techniques. Two different ferromagnetic resonance modes, in-phase and out-of-phase, are observed across all three regimes of the static magnetization configurations, through antiparallel alignment at low fields, the spin-flop transition at intermediate fields, and parallel alignment at high fields. The nonmonotonic behavior of the modes as a function of the external field is explained in detail by analyzing the interlayer exchange and Zeeman energies and is found to be solely governed by the interplay of their dynamical components. In addition, the linewidths of both modes were determined across the three regimes and the different behaviors of the linewidths versus external magnetic field are attributed to mutual spin pumping induced in the samples. Interestingly, the difference between the linewidths of the out-of-phase and in-phase modes decreases at the spin-flop transition and is reversed between the antiparallel and parallel aligned magnetization states.

Spin pumping in a ferromagnet/nonferromagnet heterostructure is directly imaged with spatial resolution as well as element selectivity. The time-resolved detection in scanning transmission x-ray microscopy allows to directly probe the spatial extent of the ac spin polarization in Co-doped ZnO which is generated by spin pumping from an adjacent permalloy microstrip. Comparing the relative phases of the dynamic magnetization component of the two constituents is possible and found to be antiphase. The correlation between the distribution of the magnetic excitation in the permalloy and the Co-doped ZnO reveals that laterally there is no one-to-one correlation. The observed distribution is rather complex, but integrating over larger areas clearly demonstrates that the spin polarization in the nonferromagnet extends laterally beyond the region of the ferromagnetic microstrip. Therefore the observations are better explained by a local spin pumping efficieny and a lateral propagation of the ac spin polarization in the nonferromagnet over the range of a few micrometers., Comment: 7 pages, 5 figures

We propose the design of a ventilator which can be easily manufactured and integrated into the hospital environment to support COVID-19 patients. The unit is designed to support standard ventilator modes of operation, most importantly PRVC (Pressure Regulated Volume Control) and SIMV-PC (Synchronised Intermittent Mandatory Ventilation) modes. The unit is not yet an approved medical device and is in the concept and prototyping stage. It is presented here to invite fast feedback for development and deployment in the face of the COVID-19 pandemic., Comment: 14 pages, 5 figures

Heteroepitaxy on nanopatterned substrates is a means of defect reduction at semiconductor heterointerfaces by exploiting substrate compliance and enhanced elastic lattice relaxation resulting from reduced dimensions. We explore this possibility in the InAs/GaAs(111)A system using a combination of nanosphere lithography and reactive ion etching of the GaAs(111)A substrate for nano-patterning of the substrate, yielding pillars with honeycomb and hexagonal arrangements and varied nearest neighbor distances. Substrate patterning is followed by MBE growth of InAs at temperatures of 150 - 350 C and growth rates of 0.011 nm/s and 0.11 nm/s. InAs growth in the form of nano-islands on the pillar tops is achieved by lowering the adatom migration length by choosing a low growth temperature of 150 C at the growth rate 0.011 nm/s. The choice of a higher growth rate of 0.11 nm/s results in higher InAs island nucleation and the formation of hillocks concentrated at the pillar bases due to a further reduction of adatom migration length. A common feature of the growth morphology for all other explored conditions is the formation of merged hillocks or pyramids with well-defined facets due to the presence of a concave surface curvature at the pillar bases acting as adatom sinks.

We analyze the shape and position of heteroepitaxial InAs islands on the top face of cylindrical GaAs(111)A nanopillars experimentally and theoretically. Catalyst-free molecular beam epitaxial growth of InAs at low temperatures on GaAs nanopillars results in InAs islands with diameters < 30 nm exhibiting predominantly rounded triangular in-plane shapes. The islands show a tendency to grow at positions displaced from the center towards the pillar edge. Atomistic molecular statics simulations evidence that triangular-prismatic islands centered to the pillar axis with diameters smaller than that of the nanopillars are energetically favored. Moreover, we reveal the existence of minimum-energy states for off-axis island positions, in agreement with the experiment. These findings are interpreted by evaluating the spatial strain distributions and the number of broken bonds of surface atoms as a measure for the surface energy. The preferred off-axis island positions can be understood in terms of an increased compliancy of the GaAs nanopillar beneath the island because of the vicinity of free surfaces, leading to a reduction of strain energy. The influence of surface steps on the energy of the system is addressed as well., Comment: 18 pages, 4 figures. Paper updated to match published version

Long-range spin transport in magnetic systems can be achieved by means of exchange-mediated spin textures with robust topological winding -- a phenomenon referred to as spin superfluidity. Its experimental signatures have been discussed in antiferromagnets which are nearly free of dipolar interaction. However, in ferromagnets, which possess non-negligible dipole fields, realization of such spin transport has remained a challenge. Using micromagnetic simulations, we investigate coherent exchange-mediated spin transport in extended thin ferromagnetic films. We uncover a two-fluid state, in which the long-range spin transport by spin textures co-exists with spin waves, as well as a soliton-screened spin transport regime at high spin injection biases. Both states are associated with distinct spin texture reconstructions near the spin injection region and sustain spin transport over large distances.

Spin waves offer intriguing novel perspectives for computing and signal processing, since their damping can be lower than the Ohmic losses in conventional CMOS circuits. For controlling the spatial extent and propagation of spin waves on the actual chip, magnetic domain walls show considerable potential as magnonic waveguides. However, low-loss guidance of spin waves with nanoscale wavelengths, in particular around angled tracks, remains to be shown. Here we experimentally demonstrate that such advanced control of propagating spin waves can be obtained using natural features of magnetic order in an interlayer exchange-coupled, anisotropic ferromagnetic bilayer. Using Scanning Transmission X-Ray Microscopy, we image generation of spin waves and their propagation across distances exceeding multiple times the wavelength, in extended planar geometries as well as along one-dimensional domain walls, which can be straight and curved. The observed range of wavelengths is between 1 {\mu}m and 150 nm, at corresponding excitation frequencies from 250 MHz to 3 GHz. Our results show routes towards practical implementation of magnonic waveguides employing domain walls in future spin wave logic and computational circuits.

Periodically patterned metamaterials are known for exhibiting wave properties similar to the ones observed in electronic band structures in crystal lattices. In particular, periodic ferromagnetic materials are characterized by the presence of bands and bandgaps in their spin-wave spectrum at tunable GHz frequencies. Recently, the fabrication of magnets hosting Dzyaloshinskii-Moriya interactions has been pursued with high interest since properties such as the stabilization of chiral spin textures and nonreciprocal spin-wave propagation emerge from this antisymmetric exchange coupling. In this context, to further engineer the magnon band structure, we propose the implementation of magnonic crystals with periodic Dzyaloshinskii-Moriya interactions, which can be obtained, for instance, via patterning of periodic arrays of heavy-metals wires on top of an ultrathin magnetic film. We demonstrate through theoretical calculations and micromagnetic simulations that such systems show an unusual evolution of the standing spin waves around the gaps in areas of the film that are in contact with the heavy-metal wires. We also predict the emergence of indirect gaps and flat bands and, effects that depend on the strength of the Dzyaloshinskii-Moriya interaction. This study opens new routes towards engineered metamaterials for spin-wave-based devices., Comment: 6 pages, 3 figures

The magnetic properties of ferromagnetic thin films down to the nanoscale are ruled by the exchange stiffness, anisotropies and the effects of magnetic fields. As surfaces break inversion symmetry, an additional effective chiral exchange is omnipresent in any magnetic nanostructure. These so-called Dzyaloshinskii-Moriya interactions (DMI) affect all inhomogeneous magnetic states either subtly or spectacularly. E.g., DMIs cause a chirality selection of the rotation sense and can fix the local rotation axis for the magnetization in domain walls (DW). But, they can stabilize also entirely different twisted magnetic structures. The chiral skyrmions a two-dimensional particle-like topological soliton is the ultimately smallest of these objects, which currently is targetted as a possible information carrier in novel spintronic devices. Observation and quantification of the chiral exchange effects provide for the salient point in understanding magnetic properties in ultrathin films and other nanostructures. An easy and reliable method to determine the DMI constant as materials parameter of asymmetric thin films is the crucial problem. Here, we put forth an experimental approach for the determination of the complete set of the micromagnetic parameters. Quasi-static Kerr microcopy observations of DW creep motion and equilibrium sizes of circular magnetic objects in combination with standard magnetometry are used to derive a consistent set of these materials parameters in polycrystalline ultrathin film systems, namely CrOx/Co/Pt stacks. The quantified micromagnetic model for these films identifies the circular magnetic objects, as seen by the optical microscopy, as ordinary bubble domains with homochiral walls. From micromagnetic calculations, the chiral skyrmions stabilized by the DMI in these films are shown to have diameters in the range 40-200nm, too small to be observed by optical microscopy.

This article presents theoretical results for the dynamic response of periodically surface-modulated ferromagnetic thin films. For such system, the role of the periodic dipolar field induced by the modulation is addressed by using the plane-wave method. By controlling the geometry of the modulated volumes within the film, the frequency modes and spatial profiles of spin waves can be manipulated. The angular dependence of the frequency band-gaps unveils the influence of both dynamic and static magnetic charges, which reside in the edges of the etching periodic zones, and it is stablished that band-gap widths created by static magnetic charges are broader than the one created by dynamic magnetic charges. To corroborate the validity of the model, the theoretical results are compared with ferromagnetic resonance simulations, where a very good agreement is achieved between both methods. The theoretical model allows for a detailed understanding of the physics underlying these kind of systems, thereby providing an outlook to potential applications associated with magnonic crystals-based devices.

This report offers a modern perspective on the problem of negative energy, based on a reexamination of the concept of time direction as it arises in a classical and quantum-mechanical context. From this analysis emerges an improved understanding of the general-relativistic stress-energy of matter as being a manifestation of local variations in the energy density of zero-point vacuum fluctuations. Based on those developments, a set of axioms is proposed from which are derived generalized gravitational field equations which actually constitute a simplification of relativity theory in the presence of negative-energy matter and a non-zero cosmological constant. Important clarifications are also achieved regarding the nature of the binary degrees of freedom of matter in the final stages of a gravitational collapse. Those results are then applied to provide original solutions to several long-standing problems in cosmology, including the problem of the nature of dark matter and dark energy, that of the origin of thermodynamic time asymmetry, and several other issues traditionally approached using inflation theory. Finally, we draw on those developments to provide significant new insights into the foundations of quantum theory, regarding, in particular, the problem of quantum non-locality, that of the emergence of time in quantum cosmology, as well as the question of the persistence of quasiclassicality following decoherence., Comment: Major revision with important changes to sections 2.8, 2.15, and 3.10 (including generalized gravitational field equations) with consequences developed in sections 4.2, 4.3, and 4.5 on cosmology

We studied the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) like state establishing due to the proximity effect in superconducting Nb/Cu41Ni59 bilayers. Using a special wedge-type deposition technique, series of 20-35 samples could be fabricated by magnetron sputtering during one run. The layer thickness of only a few nanometers, the composition of the alloy, and the quality of interfaces were controlled by Rutherford backscattering spectrometry, high resolution transmission electron microscopy, and Auger spectroscopy. The magnetic properties of the ferromagnetic alloy layer were characterized with superconducting quantum interference device (SQUID) magnetometry. These studies yield precise information about the thickness, and demonstrate the homogeneity of the alloy composition and magnetic properties along the sample series. The dependencies of the critical temperature on the Nb and Cu41Ni59 layer thickness, Tc(dS) and Tc(dF), were investigated for constant thickness dF of the magnetic alloy layer and dS of the superconducting layer, respectively. All types of non-monotonic behaviors of Tc versus dF predicted by the theory could be realized experimentally: from reentrant superconducting behavior with a broad extinction region to a slight suppression of superconductivity with a shallow minimum. Even a double extinction of superconductivity was observed, giving evidence for the multiple reentrant behavior predicted by theory. All critical temperature curves were fitted with suitable sets of parameters. Then, Tc(dF) diagrams of a hypothetical F/S/F spin-switch core structure were calculated using these parameters. Finally, superconducting spin-switch fabrication issues are discussed in detail in view of the achieved results., Comment: 34 pages, 9 figures

Quantum mechanical calculations based on an extended Heisenberg model are compared with ferromagnetic resonance (FMR) experiments on prototype trilayer systems Ni_7/Cu_n/Co_2/Cu(001) in order to determine and separate for the first time quantitatively the sources of the temperature dependence of interlayer exchange coupling. Magnon excitations are responsible for about 75% of the reduction of the coupling strength from zero to room temperature. The remaining 25% are due to temperature effects in the effective quantum well and the spacer/magnet interfaces., Comment: accepted for publication in PRL

Temperature dependent FMR-measurements of Ni and Co films are analysed using a microscopic theory for ultrathin metallic systems. The mechanism governing the temperature dependence of the magnetic anisotropy energy is identified and discussed. It is reduced with increasing temperature. This behavior is found to be solely caused by magnon excitations., Comment: 3 pages, 4 figures III Joint European Magnetic Symposia, San Sebastian, Spain

Following a short discussion of some unresolved issues in the standard model of cosmology (considered to be a generic LCDM model with flat geometry and an early period of inflation), an update on the current state of research regarding the problem of negative energy is provided. Arguments are then given to the effect that traditional assumptions concerning the behavior of negative-action matter give rise to violations of both the principle of relativity and the principle of inertia. An alternative set of axioms is proposed that would govern the behavior of negative-action matter if it is to be considered a viable element of physical theories upon which cosmological models are build. A simple framework, based on general relativity and the proposed axioms, is elaborated which enables the formulation of quantitative predictions concerning the interaction between positive and negative-action bodies. Based on those developments, a solution is proposed to the problem of the discrepancy between current experimental and theoretical values of vacuum energy density (in any cosmological model), which may also constitute a solution to the problem of the unexplained coincidence between the (model-dependent) experimental values of vacuum energy density and present-day, average, matter energy density. It is also shown how irreversibility naturally arises in cosmological models derived in this context., Comment: This paper discusses an early attempt at solving the cosmic coincidence problem using a bi-metric theory of gravitation. A follow-up paper (arxiv:1608.01531) is available that extends and improves the original approach which underlies those developments