Search

The positive hemodynamic response (PHR) during stimulation often co-occurs with a strong, sustained negative hemodynamic response (NHR). However, the characteristics and neurophysiological mechanisms of the NHR, especially in regions distal to the PHR, remain incompletely understood. Using intrinsic optical imaging (OI) and two-photon imaging, we observed that forelimb electrical stimulation evoked strong PHR signals in the forelimb region of the primary somatosensory cortex (S1FL). Meanwhile, NHR signals primarily appeared in the primary visual cortex (V1), with a delayed onset and lower amplitude relative to the PHR signals. Additionally, stimulation led to a reduction in cerebral blood flow (CBF) in the NHR region. Notably, there was an overall suppression of the calcium response in the NHR region, although a small proportion (14 %) of neurons exhibited concurrent activation. Axon tracing revealed cortico-cortical projections from S1FL to V1. These findings suggest that neuronal deactivation significantly contributes to the origin of the NHR, offering additional insights into the specific inhibitory mechanisms underlying the NHR.

The spring system functions as a pivotal element of the check valve, with its compression performance significantly influencing the valve's time, flow stability, and other characteristics. Taking cues from conventional springs, a refined rectangular helical spring with integrated support features was thoroughly evaluated for its compression performance. The design approach for this spring was elucidated, encompassing the utilization of the Finite Element Method (FEM) to model its compression behavior. Additionally, a laboratory configuration was implemented to authenticate the findings derived from the FEM simulation. Subsequently, a comparative investigation was carried out between an engineered spring and a conventional spring subjected to analogous processing. The comparative analysis unveiled that the support-featured spring exhibited a diminished lateral offset of 2.84 mm (equivalent to a reduction of 10.1 %) and a force-displacement curve with narrower vibration intervals and smaller amplitudes. Moreover, it exhibited an enhanced force feedback of 17.5 % under identical compression displacement conditions.

With the introduction of deep learning methods, the computation required for remote sensing change detection has significantly increased, and distributed computing is applied to remote sensing change detection to improve computational efficiency. However, due to the large size of deep learning models, the time-consuming gradient transfer during distributed model training weakens the acceleration effectiveness in change detection. Data communication and updates can be the bottlenecks in distributed change detection systems with limited network resources. To address the interrelated problems, we propose a communication-efficient distributed deep learning remote sensing change detection framework (CEDD-CD) based on the synchronous update architecture. The CEDD-CD integrates change detection with communication-efficient distributed gradient compression approaches, which can efficiently reduce the data volume to be transferred. In addition, for the implicit effect caused by the delay of compressed gradient update, a momentum compensation mechanism under theoretical analysis was constructed to reduce the time consumption required for model convergence and strengthen the stability of distributed training. We also designed a unified distributed change detection system architecture to reduce the complexity of distributed modeling. Experiments were conducted on three datasets; the qualitative and quantitative results demonstrate that the CEDD-CD was effective for massive remote sensing image change detection.

The escalating impacts of human activities on the ecological environment underscore the significance of valuing ecological resources within the paradigm of sustainable development. In this context, the ecological service value (ESV) of the Danjiangkou watershed (Hubei section) was assessed using a revised equivalent factor evaluation method. Additionally, the study determined the human activity intensity (HAI) and employed GeoDetector to delineate the spatial heterogeneity of ESV, thereby investigating the underlying causes. Results show that vegetation coverage attains a high level of 94%, with a minor 1.37% land use change between 2016 and 2020. Secondly, ESV exhibited a substantial variation, rising from 75.55 billion to 79.81 billion yuan, a growth rate of 5.64%. Lastly, the explanatory degree for the synergistic interplay of HAI and expenditure on the spatial variation of ESV surpassed 30%, and the average sensitivity coefficient of up to 0.82 further indicated the apparent impacts of land use and human interference activities on ESV. The study makes an excellent effort to clarify the complex coupling relationships between different land use types and ESV, which could serve as an example and model for other studies in the field.

Accurate diagnostic techniques and effective therapeutic methods are required to treat H. pylori. The application of chicken single-chain variable fragment (scFv) antibodies may diagnose and treat H. pylori. This study used the phage display technique to construct a chicken-derived immune scFv antibody library against H. pylori. Total RNA was extracted from the spleens of five immunized chickens and reverse transcribed into cDNA. A fragment of scFv was produced by overlap extension PCR and cloned into a pHEN2 phagemid vector. After the package with the M13KO7 helper phage, the recombinant HpaA protein was used as a target antigen to validate the screening ability of our antibody library by bio-panning. The dilution counting results showed that the size of the primary antibody library was estimated to be 1 × 109 cfu/mL. PCR analysis of 47 clones from the library revealed that about 100% of the clones were positive with scFv fragments, and there were no identical sequences, indicating the good diversity of the antibody library. After three rounds of bio-panning, high-affinity antibodies against recombinant HpaA protein were successfully obtained. The selected antibody specifically recognized HpaA protein in nine different H. pylori strains, confirming the screening ability of our library. The chicken immune scFv antibody library against H. pylori was successfully constructed, and the antibody library’s screening ability was validated by selecting specific scFv antibodies against recombinant HpaA and clinical strains. It provided a simple and rapid method to obtain antibodies against H. pylori for diagnosis or treatment.

This study investigates the eco-geological environmental challenges faced by Jiangxia District, a mining region in Wuhan City. By combining field surveys, literature analysis and multi-source data such as remote sensing images and on-site monitoring data, an eco-geological environment quality (EGEQ) assessment system was developed. The system consists of six indicators representing biological abundance, vegetation cover, land erosion, water abundance, surface deformation and socio-economic characteristics of the assessed area. The grey relational analysis method was utilized to calculate the weights of each indicator, and the eco-geological environment quality index (EGQI) value was obtained through the linear weighted method. The assessment results indicated a moderate grade of overall eco-geological condition in Jiangxia District between 2017 and 2021, with an 8.56% increase in the EGQI during that period. This suggests a stable and favorable eco-geo logical environment situation in the district during the specified timeframe.

Context Astragalus polysaccharide (APS) is a new tumour therapeutic drug, that has an inhibitory effect on a variety of solid tumours. Tumour cell immunosuppression is related to the up-regulation of programmed death ligand 1 (PD-L1). However, whether APS exerts its antitumor effect by regulating PD-L1 remains unclear.Objective To explore whether APS exerts its antineoplastic effect via regulating PD-L1-mediated immunosuppression in hepatocellular carcinoma (HCC).Materials and methods SMMC-7721 cells were subcutaneous injected into BALB/C mice for HCC model establishment. Mice were intraperitoneally injected with 100, 200 and 400 mg/kg APS for 12 days. Immunohistochemistry (IHC) was performed to assess CD8+ T cells' rate and PD-L1 level in HCC tissues. HCC cells were pre-treated with 0.1, 0.5 and 1 mg/mL APS for 4 h, then were treated with 10 ng/mL IFN-γ 24 h. PD-L1 level and cell apoptosis was detected by flow cytometry. PD-L1 and Moesin (MSN) proteins were measured by western blot. MiR-133a-3p and MSN mRNA levels were assessed by qRT-PCR. The targets of miR-133a-3p were predicted by starBase, and which was verified by dual-luciferase reporter assay.Results Our findings illustrated that APS dose-dependently inhibited HCC growth tested with IC50 values of 4.2 mg/mL, and IFN-γ-induced PD-L1 expression and attenuated PD-L1-mediated immunosuppression in HCC cells. APS attenuated PD-L1-mediated immunosuppression via miR-133a-3p in HCC cells. Besides, miR-133a-3p targeted to MSN, and MSN inhibited the antitumor effect of APS by maintaining the stability of PD-L1. Moreover, APS attenuated PD-L1-mediated immunosuppression via the miR-133a-3p/MSN axis.Conclusions APS attenuated PD-L1-mediated immunosuppression via miR-133a-3p/MSN axis to develop an antitumor effect. APS may be an effective drug for HCC treatment.

Selective attention is an efficient processing strategy to allocate computational resources for pivotal optical information. Here, the authors propose a bionic vision hardware to emulate the behavior, showing a potential in image classification.

IntroductionSpontaneous low-frequency oscillations play a key role in brain activity. However, the underlying mechanism and origin of low-frequency oscillations remain under debate.MethodsOptical imaging and an electrophysiological recording system were combined to investigate spontaneous oscillations in the hemodynamic parameters and neuronal activity of awake and anesthetized mice after Nω-nitro-L-arginine methyl ester (L-NAME) administration.ResultsThe spectrum of local field potential (LFP) signals was significantly changed by L-NAME, which was further corroborated by the increase in energy and spatial synchronization. The important finding was that L-NAME triggered regular oscillations in both LFP signals and hemodynamic signals. Notably, the frequency peak of hemodynamic signals can be different from that of LFP oscillations in awake mice.DiscussionA model of the neurovascular system was proposed to interpret this mismatch of peak frequencies, supporting the view that spontaneous low-frequency oscillations arise from multiple sources.

Considering the excellent properties of polytetrafluoroethylene (PTFE), the demand for this material in semiconductor manufacturing equipment has been rapidly growing in recent years. PTFE parts with special shapes can be efficiently produced by mechanical cutting methods. The main objective of the present study is to conduct turning experiments to evaluate the cutting performance and surface quality of pure PTFE. In this regard, the mechanism of the chips’ formation, cutting temperature, and cutting force were analyzed to study the cutting behavior and cutting performance. Moreover, the subsurface damage of the finished surface was investigated to evaluate the surface quality. The obtained results show that the continuous type of chips was formed in all cutting conditions. When the cutting temperature varied in the range of 40.8–57.9 °C, the cutting force varied in the range of 2.3–25.2 N. The deepest subsurface damage layer was 123.17 μm when the cutting depth and the feed rate were set to 1.0 mm and 0.1 mm/r, respectively. Considering the chip formation, cutting temperature, cutting force, surface quality, and machining efficiency as the main affecting parameters, it is found that the ideal feed rate and cutting depth at the spindle speed of 800 r/min were 0.5 mm/r and 0.8 mm, respectively.

BackgroundChina's manufacturing industry is still labor-intensive, and assembly employees in manufacturing industry are facing a great risk of work-related musculoskeletal disorders (WMSDs). ObjectiveTo investigate and analyze the prevalence and distribution of WMSDs among assembly workers in manufacturing enterprises and explore the relationship between WMSDs and ergonomic exposure factors such as posture load and mental load. MethodsFrom July to September 2017, by convenient sampling, a cross-sectional survey was conducted to select 670 workers engaged in electronic accessories assembly and railway vehicle manufacturing in three manufacturing enterprises in two cities in northern China as the research participants. The posture load assessment was based on the Chinese Musculoskeletal Questionnaire independently developed by our research group. The mental load assessment was based on a revised Chinese version of the Subjective Workload Assessment Technique. An unconditional logistic regression model was used to explore the relationship between ergonomic exposure and WMSDs. ResultsThe overall prevalence rate of WMSDs was 39.6% (265/670) with 43.8% in males and 25.2% in females; the highest prevalence rate was 47.7% in the group aged 40 years and over. The prevalence rate of WMSDs in the electronic accessories assembly workers was 16.9%, that in the railway vehicle manufacturing workers was 57.3%, and the difference was statistically significant (\begin{document}$ {\chi ^2} $\end{document}=112.63, P

BackgroundWork-related musculoskeletal diseases (WMSDs) occur in a variety of occupational populations. Because of their various discomfort and serious disease burden, they have become an important issue worthy of attention in the field of occupational health. The prevention and control of WMSDs is one of the public health problems to be solved.ObjectiveTo evaluate the intervention effect on WMSDs among assembly workers in a railway vehicle manufacturing enterprise, so as to provide scientific basis for the prevention and control of WMSDs.MethodsA total of 250 assembly workers in a railway vehicle manufacturing enterprise were selected using convenience sampling from August to December 2017. The Chinese Musculoskeletal Questionnaire was used for epidemiological investigation, and the Ergonomic Checkpoints was used for ergonomic inspection and worker interview. According to the above survey results, a six-month intervention plan including stepladder improvement and ergonomics training were implemented in the assembly workshop from September 2018 to February 2019. The intervention effects including the awareness of WMSDs, the exposure level of ergonomic load, and the occurrence of WMSDs symptoms were evaluated with relevant cross-sectional survey results before and after the intervention. The scores of WMSDs symptom intensity, symptom duration, and symptom frequency from low to high were 0-10, 1-4, and 1-5, respectively.ResultsAfter the intervention, the awareness rates of assembly workers on WMSDs types, affected body sites, influencing factors, preventive measures, and symptoms all increased from 52.3%, 51.9%, 25.5%, 19.1%, and 51.5% to 68.5%, 61.3%, 48.1%, 40.9%, and 61.3%, respectively (P

Ergonomic exposure is one of the important causes of work-related musculoskeletal disorders (WMSDs). Accurate measurement and evaluation of ergonomic exposure level and implementation of ergonomic intervention are of great significance to the prevention and control of WMSDs. Ergonomic exposure can be divided into external exposure and internal exposure, and its evaluation methods include subjective judgment method, systematic observation method, and direct measurement method. This paper summarized the internal exposure assessment methods based on musculoskeletal dynamics and biomarkers, introduced the overall design concept of ergonomic exposure assessment system, used the Ergonomic Assessment Worksheet (EAWS) as an example, and discussed the development trend of automation, intelligence, and compounding of ergonomic exposure assessment methods and the factors considered in the selection of ergonomic exposure assessment methods.

The health impacts and economic burdens associated by work-related musculoskeletal disorders (WMSDs) have become an important issue in the field of occupational health. Compared with developed countries, we should more systematically carry out in-depth research and practice on occupational ergonomics, comprehensively understand ergonomic factors and their characteristics, and strengthen the intervention and health risk assessment of ergonomic risk factors in key workplaces based on specific production conditions of different industries, so as to prevent and control the occurrence and development of WMSDs. This article introduced the concept, signs, symptoms, risk factors, and currently identifiable site-specific WMSDs. This column presented new research progress from the aspects of ergonomic load assessment methods, the prevalence and related risk factors of WMSDs in different trades, and ergonomic intervention of WMSDs, aiming to provide reference and basis for future research.

BackgroundThe prevalence rate of work-related musculoskeletal disorders (WMSDs) among manufacturing workers is relatively high and has been widely concerned. However, research on the prevalence and risk factors of multi-site WMSDs is still insufficient. ObjectiveTo explore the prevalence and risk factors of multi-site WMSDs of assembly workers in four manufacturing enterprises. MethodsThe "Chinese Musculoskeletal Questionnaire" was used to conduct a cross-sectional survey among 1401 assembly workers selected by convenient sampling in four manufacturing enterprises, and their demographic characteristics, the prevalence of WMSDs in various body parts, and the information about biomechanical factors, work organizations, work environment, and psychosocial factor exposure were collected. The prevalence of WMSDs and multi-site WMSDs were estimated, Pearson χ2 test was used for univariate analysis of multi-site WMSDs risk factors, and logistic regression was used for multi-factor analysis. ResultsThe total prevalence rate of WMSDs was 54.9% (769/1 401). The top three affected sites were neck (41.4%), shoulders (30.7%), and wrist/hand (25.1%). The prevalence rate of multi-site WMSDs was 41.9% (587/1 401). The prevalence rates of multi-site WMSDs in railway vehicle assembly and riveting workers were higher than those in electronic parts processing and glass manufacturing workers (P

The modulation of Schottky barrier, which dominates the carrier injection in vertical organic field-effect transistors, strongly depends on the source electrode. Here, Chen et al. utilize MXene as a source electrode, achieving a subthreshold swing down to 73 mv/dec and a large gate control ability.

The current increase in resistance to antifungal drugs indicates that there is an urgent need to explore novel antifungal drugs with different mechanisms of action. Phosundoxin is a biphenyl aliphatic amide using a TPP-targeting strategy which targets mitochondria. To provide insights into the antifungal activities of phosundoxin, the antifungal susceptibility testing of phosundoxin was conducted on 158 pathogenic fungi and compared to that of traditional azole drugs. Phosundoxin displayed a broad-spectrum antifungal activity on all the tested yeast-like and filamentous fungi ranging from 2 to 16 mg/L. In particular, azole-resistant clinical isolates of Candida albicans were susceptible to phosundoxin with the same MICs as azole-susceptible C. albicans. Transcriptome analysis on azole-resistant C. albicans identified 554 DEGs after treatment with phosundoxin. By integrating GO and KEGG pathway enrichment analysis, the antifungal activity of phosundoxin was related to impairment of mitochondrial respiratory chain function. Acute oral and percutaneous toxicity of phosundoxin to rats showed that the compound phosundoxin were mild toxicity and LD50 was above 5000 mg/kg body weight in rats. This study demonstrated the potential of phosundoxin as an antifungal agent for the treatment of common fungal infection and contributed to providing insights into the mechanisms of action of phosundoxin against C. albicans.

Mycoplasma pneumoniae is a significant cause of community-acquired pneumonia, which is often empirically treated with macrolides (MLs), but, presently, resistance to MLs has been a matter of close clinical concern. This assay is intended to contribute to resistance detection of M. pneumoniae in clinical practice. A novel real-time PCR assay with two non-overlapping probes on the same nucleic acid strand was designed in this study. It could effectively detect all mutation types of M. pneumoniae in 23S rRNA at loci 2063 and 2064. The results were determined by the following methods: ΔCT < 0.5 for MLs-sensitive M. pneumoniae; ΔCT > 2.0 for MLs-resistant M. pneumoniae; 10 copies as a limit of detection for all types. For detection of M. pneumoniae in 92 clinical specimens, the consistency between the results of this assay and the frequently used real-time PCR results was 95.65%. The consistency of MLs resistance results between PCR sequencing and this assay was 100% in all 43 specimens. The assay could not only cover a comprehensive range of targets and have high detection sensitivity but is also directly used for detection and MLs analysis of M. pneumoniae in specimens.

ABSTRACT: Objectives: We analysed the molecular features and antimicrobial susceptibility of Mycoplasma pneumoniae isolates from Weihai, China, in 2019. Methods: Pharyngeal swabs of 160 paediatric patients with pneumonia-related symptoms were collected and were subjected to culture and subsequent characteristic analysis. The characteristics of M. pneumoniae isolates were analysed by real-time PCR and genotyping. Antimicrobial susceptibility testing was performed against four antibiotics. All isolates were amplified for analysis of macrolide (ML) resistance mutations in domain V of the 23S rRNA gene and were genotyped using multiple-locus variable-number tandem repeat (VNTR) analysis (MLVA) and ‘AGT’ VNTR detection in the p1 gene. Results: The M. pneumoniae nucleic acid and culture-positive rate of 160 specimens were 88.1% (141/160) and 51.3% (82/160), respectively. Almost all isolates were ML-resistant (81/82). Point mutation at position 2063 in 23S rRNA was identified in all ML-resistant isolates. The ML resistance rate of M. pneumoniae genotype 2 isolates was 97.6% (41/42). MLVA types 4/5/7/2 and 4/5/7/3 belonged to genotype 1, while type 3/5/6/2 belonged to genotype 2. The numbers of ‘AGT’ VNTR in the p1 gene from all isolates was in the range of 5–15. Conclusion: This is the first report that the two genotypes of M. pneumoniae were present in a relatively equivalent ratio, with genotype 2 slightly predominant, in paediatric patients in Weihai in 2019, and the overall ML resistance rate was close to 100%. The minimum inhibitory concentration (MIC) of erythromycin in M. pneumoniae with ML resistance mutation A2063T in Weihai was higher than previously reported.

BackgroundPrinting and copying equipment is likely to release a large amount of particulate matter, thereby endangering human health. However, there is insufficient research on the level of particulate matter released by printers in offices and its influencing factors.ObjectiveThis study is designed to investigate the usage of printing equipment in college teachers' offices and the level of indoor particulate matter during printing, and to explore the influence of printer location and indoor ventilation on the particulate matter pollution level released during printer operation.MethodsFrom 9:00 to 16:00 on January 4 to 6, 2021, 20 faculty offices in a university in Beijing were selected by convenient sampling to measure the indoor particulate matter level during printing, and to investigate the printing equipment usage of 31 users in the offices. Besides, experiments were designed to explore the influence of position and distance from a printer, ventilation, and the distance between a printer and a nearby window during ventilation on the number concentration of particulate matter released by the printers.ResultsExcept one printer being placed on the ground, the other 30 printers were placed on office desks (0.71±0.16) m above the ground. Among them, 65% of the printers (n=20) were less than 1 m away from the users horizontally, and 74% of the users (n=23) accessed the printers 1-5 times a week, printing (7.03±4.07) pages per time. The peak mass concentrations in users' offices during printing of PM10, PM2.5, and PM1 were (21.96±12.96), (7.92±5.54), and (5.77±5.00) μg·m−3, respectively, and the peak number concentration of PM0.25−0.28 was (40941±36926) P·L−1. The experiments showed that when the particle sizer was located in the front, side, and back of the printers, the peak values of PM0.25−0.28 number concentration during printing were (24257±551), (12588±1354), and (11192±249) P·L−1, respectively, and the difference among them was statistically significant (F=214.9, P

BackgroundMusculoskeletal disorders (MSDs) are critical occupational and social problems. With the improvement of production mechanization and automation, and the widespread application of computers, more occupations are exposed to static postures and load. This study explored the role of inflammation in the association between static postures exposure and MSDs.MethodsThis study adopted a prospective nested case-control design in which 66 lower back MSDs cases and 66 healthy controls were selected from a cohort study of university employees. The personal information, postural load, musculoskeletal symptoms, pressure pain thresholds (PPTs), and inflammatory cytokines were collected. Logistic and linear regressions were used to investigate the association among postural load, inflammatory cytokines, and lower back MSDs. Mediation analysis was used to calculate the mediation effect.ResultsThe results of logistic and linear regressions showed that postural load and inflammatory cytokines were positively associated with lower back MSDs (P < 0.05), and postural load was positively associated with inflammatory cytokines (P < 0.05). Further, mediation analysis showed that the mediation effect of postural load on the lower back MSDs through TNF-α was 0.073 (95%CI: 0.025–0.128), and the mediation effect of posture load on the lower back MSDs through IL-6 was 0.098 (95%CI: 0.041–0.179), respectively.ConclusionStatic postures were associated with the occurrence of MSDs through inflammatory cytokines, and low-level inflammation may be a critical early event in the generation of MSDs. This study may help bridge the gap of potential mechanisms linking static postures to increased risks of MSDs, and provide new evidence for targeted protection against the global increasing MSDs.

Campylobacter is among the four main causes of gastroenteritis worldwide. Most reported Campylobacter infections are caused by C. jejuni and C. coli. However, other emerging Campylobacter pathogens have been recognized as important pathogens in humans and animals. A novel bacterial strain, PS10T, was isolated from the gastric mucous of pigs in 2022 in Beijing, China. The cell was Gram-negative, microaerobic, motile, and negative for catalase, oxidase, and urease. Phylogenetic and phylogenomic analyses based on the 16S rRNA gene and core genome indicated that this isolate belongs to the genus Campylobacter. There were low dDDH relatedness and ANI values shared within this strain and its closest species C. mucosalis below the cut-off values generally recognized for isolates of the same species. The draft genome size of PS10T is 2,240,910 bp in length with a percentage of DNA G+C contents of 37.72%. Comparing the phenotypic and phylogenetic features among this isolate and its related organisms, strain PS10T represents a novel species within the genus Campylobacter, for which the name Campylobacter gastrosuis sp. nov. (Type strain PS10T = GDMCC 1.3686T = JCM 35849T) is proposed.

The vast majority of people with cystic fibrosis (CF) are now eligible for CF transmembrane regulator (CFTR) modulator therapy. The remaining individuals with CF harbor premature termination codons (PTCs) or rare CFTR variants with limited treatment options. Although the clinical modulator response can be reliably predicted using primary airway epithelial cells, primary cells carrying rare CFTR variants are scarce. To overcome this obstacle, cell lines can be created by overexpression of mouse Bmi-1 and human TERT (hTERT). Using this approach, we developed 2 non-CF and 6 CF airway epithelial cell lines, 3 of which were homozygous for the W1282X PTC variant. The Bmi-1/hTERT cell lines recapitulated primary cell morphology and ion transport function. The 2 F508del-CFTR cell lines responded robustly to CFTR modulators, which was mirrored in the parent primary cells and in the cell donors’ clinical response. Cereblon E3 ligase modulators targeting eukaryotic release factor 3a (eRF3a) rescued W1282X-CFTR function to approximately 20% of WT levels and, when paired with G418, rescued G542X-CFTR function to approximately 50% of WT levels. Intriguingly, eRF3a degraders also diminished epithelial sodium channel (ENaC) function. These studies demonstrate that Bmi-1/hTERT cell lines faithfully mirrored primary cell responses to CFTR modulators and illustrate a therapeutic approach to rescue CFTR nonsense mutations.

Abstract Background There are geographic variations in the genotypes of Helicobacter pylori (H. pylori) cagA, vacA, iceA, oipA and dupA. The aim of the study was to investigate the distribution of these genotypes among H. pylori strains from five regions of China and their association with clinical outcomes. Materials and methods Gastric biopsy specimens were obtained from 348 patients with different gastrointestinal diseases in the five regions of China. The regional distribution was 89 patients from Shandong, 91 from Guangxi, 57 from Hunan, 58 from Qinghai and 53 from Heilongjiang. The presence of cagA, vacA, iceA, oipA and dupA genotypes was determined by polymerase chain reaction (PCR) from H. pylori DNA. Results A total of 269 H. pylori isolates were obtained, of which 74 isolates were from Shandong, 78 from Guangxi, 46 from Hunan, 33 from Qinghai and 38 from Heilongjiang. The cagA-positive status was predominant in the five regions. The predominant vacA genotypes were s1c (73.4%), m2 (70.6%) and i1 (92.9%). In strains from Shandong, s1a and m1 were dominant. By contrast, s1c was dominant in Guangxi and i1 was dominant in Hunan and Heilongjiang. The prevalence of m2 subtype in Qinghai (78.8%) was significantly higher than that in other regions (P

Abstract Background The cytotoxin-associated gene A (cagA) is one of the most important virulence factors of Helicobacter pylori (H. pylori). There is a highly polymorphic Glu-Pro-Ile-Tyr-Ala (EPIYA) repeat region in the C-terminal of CagA protein. This repeat region is thought to play an important role in the pathogenesis of gastrointestinal diseases. The aim of this study was to investigate the diversity of cagA 3′ variable region and the amino acid polymorphisms in the EPIYA segments of the CagA C-terminal region of H. pylori, and their association with gastroduodenal diseases. Methods A total of 515 H. pylori strains from patients in 14 different geographical regions of China were collected. The genomic DNA from each strain was extracted and the cagA 3′ variable region was amplified by polymerase chain reaction (PCR). The PCR products were sequenced and analyzed using MEGA 7.0 software. Results A total of 503 (97.7%) H. pylori strains were cagA-positive and 1,587 EPIYA motifs were identified, including 12 types of EPIYA or EPIYA-like sequences. In addition to the four reported major segments, several rare segments (e.g., B′, B″ and D′) were defined and 20 different sequence types (e.g., ABD, ABC) were found in our study. A total of 481 (95.6%) strains carried the East Asian type CagA, and the ABD subtypes were most prevalent (82.1%). Only 22 strains carried the Western type CagA, which included AC, ABC, ABCC and ABCCCC subtypes. The CagA-ABD subtype had statistical difference in different geographical regions (P = 0.006). There were seven amino acid polymorphisms in the sequences surrounding the EPIYA motifs, among which amino acids 893 and 894 had a statistical difference with gastric cancer (P = 0.004). Conclusions In this study, 503 CagA sequences were studied and analyzed in depth. In Chinese population, most H. pylori strains were of the CagA-ABD subtype and its presence was associated with gastroduodenal diseases. Amino acid polymorphisms at residues 893 and 894 flanking the EPIYA motifs had a statistically significant association with gastric cancer.

At present, high-precision GNSS positioning technology is an important means to monitor the health of bridges and other structures. However, the GNSS signal of reference stations and monitoring stations used for bridge monitoring can easily be blocked by bridge towers, vehicles, or other objects, resulting in low positioning accuracy and insufficient availability of GNSS, which affects the effectiveness of bridge structural health monitoring. Therefore, according to the characteristics of bridge structure, this paper proposes to take the bridge tower monitoring station as a moving-base station to build the baselines with other monitoring stations and use the moving-base RTK-GNSS method to realize the relative positioning, so as to improve the availability of GNSS in the application of bridge structure health monitoring. In this paper, the moving-base RTK-GNSS model is derived and verified via GNSS monitoring data of the Ganzhou dedicated high-speed railway bridge. The results show that the ambiguity in the fixing rate can be improved using the moving-base RTK-GNSS method with the tower monitoring station as the reference station. The deformation and vibration characteristics of each monitoring point can be reflected, and the displacement and vibration amplitude estimation accuracy can achieve results better than 4 mm. Therefore, the moving-base RTK-GNSS method can be used as an alternative scheme when the observation environment of the base station is poor or the banded engineering monitoring is applied, so as to improve the monitoring capability of GNSS.

This study was aimed at screening potential probiotic candidates to enhance the antimicrobial activity of Artemisia argyi against foodborne pathogens. Ten LAB strains were isolated from natural Artemisia argyi fermentation liquor (AAFL) and assessed for safety and antimicrobial ability. Therein, Lactiplantibacillus plantarum WLPL01, Lacticaseibacillus casei WLCA01, WLCA02, and WLCA03, and Lactobacillus harbiness WLHA01 were further evaluated for their potential probiotic properties (gastrointestinal tolerance and adhesion capacity). The results suggested that L. plantarum WLPL01 exhibited excellent properties and was, therefore, selected as the starter for A. argyi leaves fermentation. Then, L. plantarum WLPL01-fermented AAFL (AAFL-LP) was further investigated for its antimicrobial activity against foodborne pathogens. The results demonstrated that the inhibitory effect of AAFL-LP to foodborne pathogens, such as Listeria monocytogenes CMCC54007, Salmonella Typhimurium ATCC 13311, and Candida albicans ATCC 14053, was enhanced when compared to spontaneously fermented AAFL (AAFL-spontaneous). In addition, an analysis of the whole genome of L. plantarum WLPL01 revealed the presence of 13.9 kb long and 16 plantaricin-encoding loci (pln locus), and the increased antimicrobial activities of AAFL-LP might correlate with the production of bacteriocin. Our results indicate that L. plantarum WLPL01 can be used as a starter for Artemisia argyi fermentation to enhance its antimicrobial activity against foodborne pathogens.

Objectives: The aim of this study was to investigate the biological characteristics and effect of antibiotic treatment for different Mycoplasma pneumoniae isolates co-infecting the same patient. Methods: Two throat swab specimens from a single patient, on the day of admission (Sp01) and discharge (Sp13), were liquid cultured and subcultured on agar medium to obtain M. pneumoniae monoclones. The 23S rRNA gene of 50 monoclones from specimens Sp01 and Sp13 were analysed. Real-time PCR assay was used for detection of mutations and genotyping. Two typical monoclones were isolated for antimicrobial susceptibility testing. Results: Genotype 1 monoclones accounted for 70.8% (34/48) in Sp01 and 95.7% (44/46) in Sp13. All genotype 1 monoclones were of the 4-5-7-2 multilocus variable-number tandem-repeat analysis (MLVA) type, while all genotype 2 monoclones were 3-5-6-2 MLVA type. The genotype 1 monoclone, which harboured the A2063G mutation in 23S rRNA gene, was resistant to erythromycin and azithromycin in vitro, whilst genotype 2, which did not carry the mutation, was susceptible to macrolides. The proportion of macrolide-resistant M. pneumoniae monoclones in the specimen cultures collected rose from 70.8% to 95.7% at the time of discharge. Conclusion: This is the first report on the isolation of macrolide-resistant and -susceptible strains of M. pneumoniae from the same patient. After treatment, the proportion of macrolide-resistant M. pneumoniae increased, but the patient still carried viable macrolide-susceptible strains, meaning that the macrolide-susceptible strains did not disappear completely.

Abstract In this study, neodymium and arsenic were sealed into industrial pure iron cylinders at a temperature of 1223 K for 50 h. The interaction mechanism of the Nd–Fe–As system at various atomic ratios was investigated by optical microscopy, X-ray diffractometry, and scanning electron microscopy. Binary compounds Fe12As5, NdAs, Fe2As, and Fe17Nd2 were the main products formed, with traces of NdFeAs compounds. In addition, at high temperatures, As content affected the diffusion of Fe atoms; the diffusion of Fe increased with an increase in the atomic ratio. Furthermore, the diffusion ability of Nd was weaker than that of As. The major diffusion mechanism of Nd was through the Fe atomic vacancy mechanism. As mainly bind to Fe to form Fe and As compounds. The formation of ternary compounds was confirmed by laboratory experiments and mismatch calculations.

Abstract Background Helicobacter pullorum commonly colonized in the gastrointestinal tract of poultry and caused gastroenteritis. This bacterium could be transmitted to humans through contaminated food and caused colitis and hepatitis. Currently, the genetic characteristics of the H. pullorum were not recognized enough. In this study, the genomes of 23 H. pullorum strains from different counties were comparatively analyzed. Among them, H. pullorum 2013BJHL was the first isolated and reported in China. Results The genomes of the studied strains were estimated to vary from 1.55 to 2.03 Mb, with a GC content of ~ 34%. 4064 pan genes and 1267 core genes were obtained from the core-pan genome analysis using the Roary pipeline. Core genome SNPs (cg-SNPs) were obtained using Snippy4 software. Two groups were identified with the phylogenetic analysis based on the cg-SNPs. Some adhesion-related, immune regulation, motility-related, antiphagocytosis-related, toxin-related and quorum sensing related genes were identified as virulence factors. APH(3′)-IIIa, APH(2′’)-If, and AAC(6′)-Ie-APH(2′’)-Ia were identified as antibiotic resistance genes among the H. pullorum genomes. cat, SAT-4 and tetO genes were only identified in 2013BJHL, and tet(C) was identified in MIT98-5489. MIC determination revealed that the 2013BJHL showed acquired resistance to ciprofloxacin, nalidixic acid, tetracycline, gentamicin, streptomycin and erythromycin, only sensitive to ampicillin. The antibiotic resistance genetic determinants on the 2013BJHL genome correlate well with observed antimicrobial susceptibility patterns. Two types of VI secretion system (T6SS) were identified in 52.2% (12/23) the studied strains. Conclusion In this study, we obtained the genetic characteristics of H. pullorum from different sources in the world. The comprehensive genetic characteristics of H. pullorum were first described. H. pullorum showed highly genetic diversity and two sub-types of T6SSs were first identified in H. pullorum. 2013BJHL was found to be multidrug resistant as it was resistant to at least three different antibiotic classes.

BackgroundHelicobacter pylori (H. pylori) encodes numerous outer membrane proteins (OMPs), with considerable geographic heterogeneity and related to different clinical outcomes. This study aimed to investigate the distribution characteristics of five important OMP genes (sabA, hofC, homA, homB and frpB-4) in different regions of China.Materials and methodA total of 266 strains were isolated from 348 stomach biopsy specimens in Shandong, Guangxi, Heilongjiang, Hunan, and Qinghai provinces. The presence of sabA, hofC, homA, homB and frpB-4 gene was detected by polymerase chain reaction (PCR) from H. pylori genomic DNA.ResultsAmong the strains in five regions, the prevalence of frpB-4 was 100% and that of hofC was 97.7%. The prevalence of homB in the isolates from Qinghai (45.5%) was significantly lower than that in Shandong (75.3%), Guangxi (76.9%) and Hunan (69.6%) (PConclusionThe prevalence of homA, homB, and sabA genes and the sabA "on" or "off" status have significant geographical differences among five provinces in China. The presence of homA and sabA genes may be protective factors of gastritis.

Background & AimsGastric mucosa-associated lymphoma (GML) is a mature B cell tumor related to Helicobacter pylori (H.pylori) infection. The clinical manifestations of GML are not specific, so GML is often misdiagnosed, leading to excessive treatment. The pathogenesis of H.pylori-induced GML is not well understood and there are no molecular markers for early GML diagnosis.MethodsGlycopeptidomics analyses of host cell lines (a BCG823 cell line, C823) and C823 cells infected by H. pylori isolated from patients with GML (GMALT823), gastritis (GAT823), gastric ulcer (GAU823) and gastric cancer (GAC823) were carried out to clarify the host reaction mechanism against GML and to identify potential molecular criteria for the early diagnosis of GML.ResultsThirty-three samples were analyzed and approximately 2000 proteins, 200 glycoproteins and 500 glycopeptides were detected in each sample. O-glycans were the dominant glycoforms in GMALT823 cells only. Four specific glycoforms in GMALT823 cells and 2 specific glycoforms in C823 and GMALT823 cells were identified. Eight specific glycopeptides from 7 glycoproteins were found in GMALT823 cells; of these glycopeptides, 6 and 3 specific glycopeptides had high affinity for T cell epitopes and have conformational B cell epitopes, respectively.ConclusionThe predominant glycoforms of host cells infected by MALT H. pylori isolates differ from others, and the glycoproteins, glycosylation sites and glycoforms might be closely related to the formation of GML, which provides new insights into the pathogenic mechanisms of H. pylori infection and suggests molecular indicators for the early diagnosis of GML.

Abstract In order to improve the cutting performance in broaching, the lubrication and cleaning effects offered by water-based cutting fluids with green additives need to be studied from the viewpoint of green manufacturing. Therefore, water-based solutions with castor oil, surfactant (linear alkylbenzene sulfonate, LAS), and nanographite were prepared by ultrasonic agitation and sprayed into the zone of broaching via atomization. The performances of the cutting fluids, in terms of the viscosity, specific heat, wetting angle, and droplet size, were evaluated to discuss their effects on the broaching load. Among the fluids, the addition of LAS into oil-in-water (WO-S), where its cutting fluid with 10 wt.% castor oil and 1.5 wt.% surfactant, exhibited the lowest broaching force. With regard to the lubricating and cleaning mechanisms, WO-S has good wettability and permeability, and hence, can lubricate the cutting edge of the tool to decrease the cutting load, cool the cutting edge to keep it sturdy, and clean the surface of the cutting edge to keep it sharp. The results reveal that the simultaneous addition of castor oil and LAS had remarkable effects on the lubrication and cleaning, and resulted in a broaching load reduction of more than 10% compared to commercial cutting fluids. However, the addition of nanographite could not improve the lubrication owing to its agglomeration.

Abstract Background In China mainland, most Mycoplasma pneumoniae related studies are carried out in Beijing and Shanghai, while rare studies are performed in the other regions. In this study, we analyzed the molecular biology characteristics and antimicrobial susceptibility of clinical isolates of M. pneumoniae from 5 regions between January 2017 and December 2018. Methods Genotyping was performed to 154 M. pneumoniae isolates from 5 cities using PCR and multiple-locus variable-number tandem repeat analysis (MLVA) method. Antimicrobial susceptibility test was performed to all the isolates against 4 antibiotics. Sequencing was performed to the amplification products of the 23S rRNA drug resistant gene. Results Genotype I was detected in 118 M. pneumoniae isolates (76.6%), and genotype II was identified in 36 isolates (23.4%). The majority (92.2%) of the MLVA genotypes were 4–5–7-2 and 3–5–6-2, which represented the genotype I and II, respectively. The total macrolide (ML) resistance rate was 79.7%. The minimum inhibitory concentration (MIC) of the erythromycin was in a range of 128- > 256 μg/ml, while that for the azithromycin was 2-32 μg/ml. There were mutations in the 23S rRNA in each ML resistance isolate. Jilin city showed the highest prevalence of genotype I (100%) and ML resistance rate (100%), while Jinan showed the lowest prevalence of genotype I (45.5%) and ML resistance rate (54.5%). Conclusions A large variance was identified in the M. pneumoniae genotype and ML resistance among the 5 cities. The proportion of M. pneumoniae with a genotype II genotype (3–5–6-2) showed an increased trend.

The leading cause of cystic fibrosis is the deletion of phenylalanine 508 (F508del) in the first nucleotide-binding domain (NBD1) of the cystic fibrosis transmembrane conductance regulator (CFTR). Here authors we develop nanobodies targeting NBD1 of human CFTR and demonstrate their ability to stabilize both isolated NBD1 and full-length protein.

Deep rock will be influenced by the excavation disturbances of different degrees, which seriously affects the safety production of underground mines. Considering that deep rock will be impacted by different temperatures and varied disturbance degrees, this work analyzes the effect of temperature on the dynamic properties of marble by means of the dynamic and static combined SHPB test device. The results reveal that as the temperature climbed, the diameter and height of the specimen increased and the mass and longitudinal wave velocity dropped. The variation laws of total stress–strain curves after varied high temperatures are substantially the same; the peak stress was negatively correlated with the action temperature. At 25 °C~400 °C, the failure mode of specimens is less affected by temperature. When the temperature is higher than 400 °C, the failure degree of specimens increases with the growth of temperature. At 25~400 °C, the above energy varies minimally. At 400~800 °C, with the increase in temperature, the incident energy, transmitted energy and absorption energy decrease, and the reflection energy increases gradually.

Summary: In this study, a multisite SNP genotyping and macrolide (ML) susceptibility gene test method for Mycoplasma pneumoniae (M. pneumoniae) was developed based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The detection limit of this method for nucleic acids was 102 -103 copies/reaction. Six SNP site-based genotyping and 3 ML susceptibility sites could be detected simultaneously based on multiplex PCR and mass probe. Using the method constructed in this study, 141 Chinese clinical isolates were divided into 8 SNP types. All the SNP test results for the ML susceptibility gene were in line with those of the 23S rRNA sequencing results. With this method, the multisite SNP genotyping and ML susceptibility determination of M. pneumoniae can be completed simultaneously in one test, which greatly reduces the workload and cost, improves the genotyping ability of M. pneumoniae and deserves clinical application.

In the absence of an effective treatment to alter the progressive course of cognitive decline and dementia, identification of modifiable risk factors that could promote healthy cognitive aging has become a public health research priority. This study seeks to comprehensively determine the contemporaneous associations of a broad spectrum of time-varying modifiable lifestyle factors with age-related cognitive decline in a large population-based cohort of older adults. A total of 5,711 subjects aged 50 and older from the WHO Study on global AGEing and adult health (SAGE) in Shanghai were studied. Repeated measures of lifestyle factors and cognitive performance were conducted in 2009–2010 and 2014–2015. Linear random slope models were used to evaluate the contemporaneous associations between time-varying lifestyle factors and cognitive performance. Person-mean centering method was used to disaggregate the between- and within-person effects in the time-varying lifestyle factors in the random slope models. We found that higher vegetable and fruit consumption, as well as higher level of physical activity were positively associated with all cognitive domains. Body mass index (BMI) was negatively associated with all cognitive domains, whereas waist-to-hip ratio (WHR) was negatively associated with verbal fluency score only. Sedentary time was negatively associated with digit span score but positively associated with verbal fluency score. The between-person effects seem to be more dominant than within-person effects. Overall, our findings suggest better management of multiple lifestyle factors may protect against cognitive decline in later life. Higher vegetable and fruit consumption and physical activity are protective, whereas obesity is detrimental to cognitive decline in older adults. This study underpins the development of multi-domain lifestyle recommendations to promote healthy cognitive aging.

BackgroundThe correlation between the infection of H. pylori and the occurrence of gastric MALT lymphoma (GML) has been well documented. However, the mechanism of how GML is caused by this bacterium is not well understood, although some immunologic mechanisms are thought to be involved.Materials and methodsIn this study, we performed both transcriptomic and proteomic analyses on gastric cancer cells infected by H. pylori isolates from GML patients and the gastric ulcer strain 26695 to investigate the differentially expressed molecular signatures that were induced by GML isolates.ResultsTranscriptomic analyses revealed that the differentially expressed genes (DEGs) were mainly related to binding, catalytic activity, signal transducer activity, molecular transducer activity, nucleic acid binding transcription factor activity, and molecular function regulator. Fifteen pathways, including the Wnt signaling pathway, the mTOR signaling pathway, the NOD-like receptor signaling pathway and the Hippo signaling pathway, were revealed to be related to GML isolates. Proteomic analyses results showed that there were 116 differentially expressed proteins (DEPs). Most of these DEPs were associated with cancer, and 29 have been used as biomarkers for cancer diagnosis. We also found 63 upstream regulators that can inhibit or activate the expression of the DEPs. Combining the proteomic and transcriptomic analyses revealed 12 common pathways. This study provides novel insights into H. pylori-associated GML. The DEPs we found may be good candidates for GML diagnosis and treatment.ConclusionsThis study revealed specific pathways related to GML and potential biomarkers for GML diagnosis.

Milling plays a significant role in the machining of aluminum alloy parts. However, in the milling process, the material easily adheres to the tip of the milling tool due to the high ductility and thermal deformation of the aluminum alloy; the machining efficiency and quality are hard to further improve. Hence, in order to promote the machining performances, three textures (linear, wavy, and micropitted) are prepared, respectively, on rake face of milling tools using the laser processing system. Then, milling load, top-burrs, and surface quality are chosen to discuss the machining performance of textured milling tools. In particular, the top-burrs are investigated by relative area ratio of top-burrs (RARB) which is calculated from the micrograph after binarization. The obtained results evidently show that the wavy textured milling tool reduces the milling load by an amount of 10.7% compared to the nontextured milling tool. This is due to the smaller contact area that reduces the internal friction of the tool-chip contact area and thus reduces the load. And surface roughness improves by an amount of 23.8% because the wavy texture has the largest proportion of the unit area, and it can effectively improve the storage capacity of debris. Therefore, the wavy texture proposed in this research is of great reference value for the optimization of the machining performance of the milling tool.

Abstract Reducing the dosage of chemotherapeutic drugs via enhancing the delivery efficiency using novel nanoparticles has great potential for cancer treatment. Here, we focused on improving mitoxantrone delivery by using cholesterol-substituted pullulan polymers (CHPs) and selected a suitable nano-drug size to inhibit the growth of bladder cancer cells. We synthesized three kinds of CHPs, named CHP-1, CHP-2, CHP-3. Their chemical structures were identified by NMR, and the degree of cholesterol substitution was 6.82%, 5.78%, and 2.74%, respectively. Their diameters were 86.4, 162.30, and 222.28 nm. We tested the release rate of mitoxantrone in phosphate-buffered saline for 48 h: the release rate was 38.73%, 42.35%, and 58.89% for the three CHPs. The hydrophobic substitution degree in the polymer was associated with the self-assembly process of the nanoparticles, which affected their size and therefore drug release rate. The release of the three drug-loaded nanoparticles was significantly accelerated in acid release media. The larger the nanoparticle, the greater the drug release velocity. At 24 h, the IC50 value was 0.25 M, for the best inhibition of mitoxantrone on bladder cancer cells. 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) experiments demonstrated that drug-loaded CHP-3 nanoparticles with the largest size were the most toxic to bladder cancer cells. Immunofluorescence and flow cytometry revealed that drug-loaded CHP-3 nanoparticles with the largest size had the strongest effect on promoting apoptosis of bladder cancer cells. Also, the three drug-loaded nanoparticles could all inhibit the migration of MB49 cells, with large-size CHP-3 nanoparticles having the most powerful inhibition.

Acquisition of novel resistance genes is a key driver of multidrug resistance in the nosocomial pathogen Acinetobacter baumannii. To investigate the DNA uptake ability among clinical A. baumannii strains, a planktonic salt-free transformation assay was developed. A total of 142 clinical A. baumannii isolates with divergent genetic distance were selected, and 86 of them belong to international clonal lineage II (ICL2). Using this new transformation assay, 38% of the clinical A. baumannii isolates were natural competent. Among the multidrug-resistant (MDR) isolates, the transformable isolates all belonging to the ICLs, and showed significant higher transformation frequency compared with sensitive isolates. In addition, some of the ICL2 isolates triggered competence much earlier than the sensitive isolates with similar transformation frequencies. This may give them more opportunities to obtain successful transformation in their natural environment and provides an important clue to explain the severe drug resistance and clinical successfulness of ICL2.

Some amoxicillin-resistant strains of H. pylori show a sharp decrease in amoxicillin resistance after freezing. In China, most clinical gastric mucosal specimens are frozen and transported for isolation and drug susceptibility testing for H. pylori, which may lead to an underestimation of the amoxicillin resistance. The objective of this study is to investigated reasons for the decreased amoxicillin resistance after cryopreservation. A high-level amoxicillin-resistant clone (NX24r) was obtained through amoxicillin pressure screening. After cryopreservation at −80 °C for 3 months, the minimum inhibitory concentration (MIC) of NX24r was reduced sharply. Mutations and changes of transcriptome were analyzed after amoxicillin screening and cryopreservation. Mutations in PBP1 (I370T, E428K, T556S) and HefC (M337K, L378F, D976V) were detected in NX24r, which may be the main reason for the induced amoxicillin resistance. No mutations were found in PBP1 or HefC after cryopreservation. However, transcriptome analysis showed that down-regulated genes in the cryopreserved clone were significantly enriched in plasma membrane (GO:0005886), including lepB, secD, gluP, hp0871 and hp1071. These plasma membrane genes are involved in the biosynthesis and transport function of the membrane. The decreased amoxicillin resistance after cryopreservation may be related to the down-regulation of genes involved in membrane structure and transport function.

Helicobacter pylori (H. pylori) adhesion to human gastric epithelial cells is closely linked with fucosylated glycans. Therefore, investigation of fucosylation in the interaction of gastric epithelial cells with H. pylori is critical. In this study we used lectin microarrays to detect the expression of fucosylated glycans in gastric epithelial cells (GES-1) infected with H. pylori strains isolated from patients with different diseases including chronic gastritis, duodenal ulcers, and gastric cancer (each containing two strains) at 4 h. In addition, we investigated the time-course expression of fucosyltransferase (FUT) 1–6 genes in GES-1 cells stimulated with H. pylori strains at 0.5–8 h. At 4 h post-infection, Lotus, AAA, BC2LCN, PA-IIL, CNL and ACG lectins had increased signals in H. pylori-infected GES-1 cells compared to uninfected cells. Higher expression of FUT1 and FUT2 was detected in all H. pylori-infected GES-1 cells within 2 h, regardless of the H. pylori strain. In particular, the expression of FUT2 was higher in H. pylori-infected GES-1 cells with a higher fold change in levels of BC2LCN lectin specific to α1-2 linked fucose (Fuc) at 4 h. The results suggest that the high levels of α1, 2-linked Fuc synthesized by FUT1/2, might play a role in the preliminary stage of H. pylori infection. This provides us with pivotal information to understand the adhesion of H. pylori to human gastric epithelial cells.

The preparation of Li2CO3 from brine with a high mass ratio of Mg/Li is a worldwide technology problem. Membrane separation is considered as a green and efficient method. In this paper, a comprehensive Li2CO3 preparation process, which involves electrochemical intercalation-deintercalation, nanofiltration, reverse osmosis, evaporation, and precipitation, was constructed. Concretely, the electrochemical intercalation-deintercalation method shows excellent separation performance of lithium and magnesium, and the mass ratio of Mg/Li decreased from the initial 58.5 in the brine to 0.93 in the obtained lithium-containing anolyte. Subsequently, the purification and concentration are performed based on nanofiltration and reverse osmosis technologies, which remove mass magnesium and enrich lithium, respectively. After further evaporation and purification, industrial-grade Li2CO3 can be prepared directly. The direct recovery of lithium from the high Mg/Li brine to the production of Li2CO3 can reach 68.7%, considering that most of the solutions are cycled in the system, the total recovery of lithium will be greater than 85%. In general, this new integrated lithium extraction system provides a new perspective for preparing lithium carbonate from high Mg/Li brine.

The influence of different heat preservation temperatures on the interaction in the Pr–Fe–As ternary system and the principle for generating the interaction products of the Pr–Fe–As ternary system were studied by metallographic microscopy, scanning electron microscopy, and x-ray diffraction. Results showed that the α -Fe with As (i.e., the compound formed when the solubility of As in Fe exceeds the maximum solubility), Fe _2 As, PrAs, and a small amount of Fe _17 Pr _2 were the main products when the atomic ratio of Pr: As is 1:3 and heat preservation for 20 h at 1173 K, 1223 K and 1273 K. PrAs decreased as the temperature increased, while the α -Fe with As decreased as the temperature decreased, and Fe _2 As increased gradually as α -Fe with As decreased. In the Pr–Fe–As ternary system, the diffusion of Pr is mainly short-range diffusion and double vacancies, and the PrAs develops in the margin of the penetration region, preventing the diffusion of As in Fe.

Candida krusei is a notable pathogenic fungus that causes invasive candidiasis, mainly due to its natural resistance to fluconazole. However, to date, there is limited research on the genetic population features of C. krusei. We developed a set of microsatellite markers for this organism, with a cumulative discriminatory power of 1,000. Using these microsatellite loci, 48 independent C. krusei strains of clearly known the sources, were analyzed. Furthermore, susceptibility to 9 antifungal agents was determined for each strain, by the Clinical and Laboratory Standards Institute broth microdilution method. Population structure analyses revealed that C. krusei could be separated into two clusters. The cluster with the higher genetic diversity had wider MIC ranges for six antifungal agents. Furthermore, the highest MIC values of the six antifungal agents belonged to the cluster with higher genetic diversity. The higher genetic diversity cluster might have a better adaptive capacity when C. krusei is under selection pressure from antifungal agents, and thus is more likely to develop drug resistance.

Abstract Lithium extraction from high Mg/Li ratio brine is a key technical problem in the world. Based on the principle of rocking‐chair lithium‐ion batteries, cathode material LiFePO4 is applied to extract lithium from brine, and a novel lithium‐ion battery system of LiFePO4 | NaCl solution | anion‐exchange membrane | brine | FePO4 is constructed. In this method, Li+ is selectively absorbed from the brine by FePO4 (Li+ + e + FePO4 = LiFePO4); meanwhile, Li+ is desorbed from LiFePO4 (LiFePO4 − e = Li+ + FePO4) and enriched efficiently. To treat a raw brine solution, the Mg/Li ratio decreases from the initial 134.4 in the brine to 1.2 in the obtained anolyte and 83% lithium is extracted. For the treatment of an old brine solution, the Mg/Li ratio decreases from the initial 48.4 in the brine to 0.5 and the concentration of lithium in the anolyte is accumulated about six times (from the initial 0.51 g L−1 in the brine to 3.2 g L−1 in the anolyte), with the absorption capacity of about 25 mg (Li) g (LiFePO4)−1. Additionally, it displays a great perspective on the application in light of its high selectively, good cycling performance, effective lithium enrichment, environmental friendliness, low cost, and avoidance of poisonous organic reagents and harmful acid or oxidant.

An eight-channel, high speed pyrometer for precise temperature measurement is designed and realized in this work. The addition of longer-wavelength channels sensitive at lower temperatures highly expands the measured temperature range, which covers the temperature of interest in shock physics from 1500K-10000K. The working wavelength range is 400-1700nm from visible light to near-infrared (NIR). Semiconductor detectors of Si and InGaAs are used as photoelectric devices, whose bandwidths are 50MHz and 150MHz respectively. Benefitting from the high responsivity and high speed of detectors, the time resolution of the pyrometer can be smaller than 10ns. By combining the high-transmittance beam-splitters and narrow-bandwidth filters, the peak spectrum transmissivity of each channel can be higher than 60%. The gray-body temperatures of NaI crystal under shock-loading are successfully measured by this pyrometer.