Search

The introduction of Na+ is considered as an effective way to improve the performance of Ni-rich cathode materials. However, the direct structure–property correlation for Na+ doped NCM-based cathode materials remain unclear, due to the difficulty of local and accurate structural characterization for light elements such as Li and Na. Moreover, there is the complexity of the modeling for the whole Li ion battery (LIB) system. To tackle the above-mentioned issues, we prepared Na+-doped LiNi0.6Co0.2Mn0.2O2 (Na-NCM622) material. The crystal structure change and the lattice distortion with picometers precision of the Na+-doped material is revealed by Cs-corrected scanning transmission electron microscopy (STEM). Density functional theory (DFT) and the recently proposed electrochemical model, i.e., modified Planck-Nernst-Poisson coupled Frumkin-Butler-Volmer (MPNP-FBV), has been applied to reveal correlations between the activation energy and the charge transfer resistance at multiscale. It is shown that Na+ doping can reduce the activation energy barrier from ΔG = 1.10 eV to 1.05 eV, resulting in a reduction of the interfacial resistance from 297 Ω to 134 Ω. Consequently, the Na-NCM622 cathode delivers a superior capacity retention of 90.8 % (159 mAh.g−1) after 100 cycles compared to the pristine NCM622 (67.5 %, 108 mAh. g−1). Our results demonstrate that the kinetics of Li+ diffusion and the electrochemical reaction can be enhanced by Na+ doping the cathode material.

Li-Se battery is a promising energy storage candidate owing to its high theoretical volumetric capacity and safe operating condition. In this work, for the first time, we report using the whole organic Melamine-based porous polymer networks (MPNs) as a precursor to synthesize a N, O, S co-doped hierarchically porous carbon nanobelts (HPCNBs) for both Li-ion and Li-Se battery. The N, O, S co-doping resulting in the defect-rich HPCNBs provides fast transport channels for electrolyte, electrons and ions, but also effectively relieve volume change. When used for Li-ion battery, it exhibits an advanced lithium storage performance with a capacity of 345 mAh g−1 at 500 mA g−1 after 150 cycles and a superior rate capacity of 281 mAh g−1 even at 2000 mA g−1. Further density function theory calculations reveal that the carbon atoms adjacent to the doping sites are electron-rich and more effective to anchor active species in Li-Se battery. With the hierarchically porous channels and the strong dual physical–chemical confinement for Li2Se, the Se@ HPCNBs composite delivers an ultra-stable cycle performance even at 2 C after 1000 cycles. Our work here suggests that introduce of heteroatoms and defects in graphite-like anodes is an effective way to improve the electrochemical performance.