Search

Carbon sphere@layered double hydroxides filled cellulose nanofibers (ACS@LDHs/CNF) aerogel was successfully synthesized. The removal rate of Cr(VI) using ACS@LDHs/CNFs aerogel at a solid-liquid ratio of 1 g/L was 89.4%, which was higher compared to the removal rate of 65.2% using LDHs alone. The adsorption capacity of ACS@LDHs/CNFs for Cr(VI) was determined to be 44.9 mg/g. The adsorption kinetics followed the pseudo-second-order kinetic equation, and the isotherm data showed good agreement with the Langmuir model. The adsorption mechanism of Cr(VI) onto ACS@LDHs/CNFs aerogel was also investigated. Additionally, the ACS@LDHs/CNFs aerogel demonstrated consistent high adsorption efficiency over 4 consecutive cycles of adsorption-regeneration. [ABSTRACT FROM AUTHOR]

Clarifying the mechanical characteristics of gas hydrate-bearing sediments (GHBS) from a mechanical perspective is crucial for ensuring the long-term, safe, and efficient extraction of natural gas hydrates. In this study, seabed soft clay from the northern South China Sea was utilized to prepare clayey silt samples, aligning with gradation curves related to hydrate extraction projects in the Shenhu area of the South China Sea. Utilizing the high-pressure low-temperature hydrate triaxial testing system (ETAS), twelve sets of triaxial shear tests were conducted. The results highlight that increases in hydrate saturation and confining pressure significantly enhance GHBS' strength and stiffness, with more pronounced volume expansion observed during shearing. These tests have elucidated the mechanical responses of GHBS. Subsequently, empirical formulas were developed to characterize their properties under varying conditions. Additionally, based on the experimental data, the micro-mechanisms of GHBS were analyzed, suggesting that hydrates notably contribute to the filling and cementing effects in GHBS, with these effects varying with changes in hydrate saturation and confining pressure. This study contributes to a deeper understanding of the fundamental mechanical properties of GHBS. [ABSTRACT FROM AUTHOR]

Observations of currents and temperatures from four moorings deployed around the deep slope (∼2500 m) of Caiwei Guyot in the Pacific Prime Crust Zone were utilized to investigate topographically trapped waves at low-latitude seamounts. Contrasting with commonly reported persistent diurnal seamount-trapped wave cases at middle and high latitudes, the subinertial variability in deep currents and temperatures at the slope of Caiwei Guyot was primarily characterized by two distinct lower-frequency bands (i.e., 13–24 and 3.3–4.7 days). These subinertial variabilities are interpreted as intermittent seamount-trapped waves and topographic Rossby waves (TRWs). During certain time periods, the observations include key signatures of seamount-trapped waves, such as near-opposite phases of azimuthal velocity (and temperature) on opposite flanks of the seamount, and patterns of temporal current rotation consistent with counterrotating cells of horizontal current propagating counterclockwise around the seamount. After comparing these observations to idealized seamount-trapped wave solutions, we conclude that the 13–24-day (3.3–4.7-day) energy is mainly due to radial–vertical mode 5 (3) for azimuthal wavenumber 1 (3). Sometimes the subinertial energy remained pronounced at only one flank of the seamount, primarily explained as TRWs with 192–379-m vertical trapping scale and 14–28-km wavelength. Upper-layer mesoscale perturbations might provide energy for deep seamount-trapped waves and TRWs. This study highlights the role of topographically trapped waves in modulating the deep circulation at low-latitude seamounts. [ABSTRACT FROM AUTHOR]

With the exploration, development, and research of deep‐sea resources, there is an urgent need for long‐term and continuous observation data of the deep‐sea seabed boundary layer. The traditional method of deep‐sea seabed survey and sampling based on scientific research vessels has the discontinuity of observation data in space and time scales. There are some problems in the seabed in situ observation method based on the seabed observation network for low mobility and high operation and maintenance costs, restricting the in‐depth understanding of the dynamic change process of the deep‐sea floor. To solve the above problems, an open and modular data acquisition control system was designed based on an embedded system and signal processing technology. In terms of the physical, chemical, geological, and ecosystem characteristics of the seafloor or near the seafloor boundary layer, various functional sensors and instrumentation were matched to form an independent underwater integrated measurement or experimental device, eventually realizing in situ multiparameter and long‐time series observations of the seafloor. The system data acquisition and control test were completed through laboratory experiments, which verified the feasibility of the system design. The research showed important theoretical and technical reference significance for the exploration and development of resources in the submarine boundary layer and the promotion of deep‐sea scientific research. [ABSTRACT FROM AUTHOR]