Search

The charge equilibration of laser-accelerated carbon ion beams in 2 mg/cm3 foam target was investigated experimentally. The ions were generated through target normal sheath acceleration mechanism in laser-foil interaction scheme. This allows to get the equilibrium charge state in wide energy range near Bragg peak within a single shot. By using foam, the charge equilibration measurement in density regime between gas and solid state was firstly reached out experimentally. It was found that the theoretical predictions with tabulated cross section data for gas target greatly underestimated the charge states. The experimental data are in close agreement with both semi-empirical formula as well as rate equation predictions based on ion-solid interactions. The important role of target density effects that increase the ionization probability and decrease the electron capture probability through frequent multi-collisions in foam are demonstrated. The double electron processes are shown to have little influence on the average charge states. The findings are essential for high energy density physics research where the foams are widely used, and have impacts on a broad range of applications in medical, biological and material fields. The method also provides a new approach to investigate the interaction mechanism of swift heavy ions in matter by taking advantage of the laser-accelerated short-pulse wide-energy range ions.

We report on charge state measurements of laser-accelerated carbon ions in the energy range of several MeV penetrating a dense partially ionized plasma. The plasma was generated by irradiation of a foam target with laser-induced hohlraum radiation in the soft X-ray regime. We used the tri-cellulose acetate (C$_{9}$H$_{16}$O$_{8}$) foam of 2 mg/cm$^{-3}$ density, and $1$-mm interaction length as target material. This kind of plasma is advantageous for high-precision measurements, due to good uniformity and long lifetime compared to the ion pulse length and the interaction duration. The plasma parameters were diagnosed to be T$_{e}$=17 eV and n$_{e}$=4 $\times$ 10$^{20}$ cm$^{-3}$. The average charge states passing through the plasma were observed to be higher than those predicted by the commonly-used semiempirical formula. Through solving the rate equations, we attribute the enhancement to the target density effects which will increase the ionization rates on one hand and reduce the electron capture rates on the other hand. In previsous measurement with partially ionized plasma from gas discharge and z-pinch to laser direct irradiation, no target density effects were ever demonstrated. For the first time, we were able to experimentally prove that target density effects start to play a significant role in plasma near the critical density of Nd-Glass laser radiation. The finding is important for heavy ion beam driven high energy density physics and fast ignitions., Comment: 7 pages, 4 figures, 35 conferences

Benefit from the promising features of second-order correlation, ghost imaging (GI) has received extensive attentions in recent years. Simultaneously, GI is affected by the poor trade-off between sampling rate and imaging quality. The traditional image reconstruction method in GI is to accumulate the action result of each speckle and the corresponding bucket signal. We found that the image reconstruction process of GI is very similar to the Recurrent Neural Network (RNN), which is one of the deep learning algorithm. In this paper, we proposed a novel method that effectively implements GI on the RNN architecture, called GI-RNN. The state of each layer in RNN is determined by the output of the previous layer and the input of this layer, and the output of the network is the sum of all previous states. Therefore, we take the speckle of each illumination and the corresponding bucket signal as the input of each layer, and the output of the network is the sum of all previous speckle and bucket signal, which is the image of the target. The testing results show that the proposed method can achieve image reconstruction at a very low sampling rate (0.38$\%$). Moreover, we compare GI-RNN with traditional GI algorithm and compressed sensing algorithm. The results of different targets show that GI-RNN is 6.61 dB higher than compressed sensing algorithm and 12.58 dB higher than traditional GI algorithm on average. In our view, the proposed method makes an important step to applications of GI.

Ghost imaging (GI) has been paid attention gradually because of its lens-less imaging capability, turbulence-free imaging and high detection sensitivity. However, low image quality and slow imaging speed restrict the application process of GI. In this paper, we propose a improved GI method based on Denoising Convolutional Neural Networks (DnCNN). Inspired by the corresponding between input (noisy image) and output (residual image) in DnCNN, we construct the mapping between speckles sequence and the corresponding noise distribution in GI through training. Then, the same speckles sequence is employed to illuminate unknown targets, and a de-noising target image will be obtained. The proposed method can be regarded as a general method for GI. Under two sampling rates, extensive experiments are carried out to compare with traditional GI method (basic correlation and compressed sensing) and DnCNN method on three data sets. Moreover, we set up a physical GI experiment system to verify the proposed method. The results show that the proposed method achieves promising performance.

Nowadays, target recognition technique plays an important role in many fields. However, the current target image information based methods suffer from the influence of image quality and the time cost of image reconstruction. In this paper, we propose a novel imaging-free target recognition method combining ghost imaging (GI) and generative adversarial networks (GAN). Based on the mechanism of GI, a set of random speckles sequence is employed to illuminate target, and a bucket detector without resolution is utilized to receive echo signal. The bucket signal sequence formed after continuous detections is constructed into a bucket signal array, which is regarded as the sample of GAN. Then, conditional GAN is used to map bucket signal array and target category. In practical application, the speckles sequence in training step is employed to illuminate target, and the bucket signal array is input GAN for recognition. The proposed method can improve the problems caused by conventional recognition methods that based on target image information, and provide a certain turbulence-free ability. Extensive experiments show that the proposed method achieves promising performance.