Search

AbstractThe stress state of composite rock joints has a significant impact on the overall stability of the rock mass. Studying the composite mechanism disk specimens with different matrix strengths and inclination angles under Brazilian splitting state is of great significance for improving the safety of surrounding rock. This research conducted Brazilian tests on different types of jointed composite disk specimens at different inclination angles and explored the effects of inclination angle and material strength on the mechanical properties and deformation characteristics of specimens. Clarified the failure mechanism of joint specimen. The experimental results indicate that the disk specimens under different inclination angles exhibit three typical failure modes. As the inclination angle increases, failure mode changes from Disk matrix failure (DM failure) to Disk matrix and structural failure (DMS failure), and ultimately to Disk structural failure (DS failure). Failure load, input energy, and strain energy of the specimen continue to decrease as the inclination angle increases and the matrix strength decreases. The decrease in matrix material significantly weakens the strength of the specimen, but this effect continues to decrease with the increase of inclination angle. DIC results show that as the inclination angle increases, the position of cracks exists from the loading end to the joint surface. Through theoretical analysis, it is found that as the inclination angle increases, the stress state at the center of the specimens changes from compression-shear state to shear state, and finally to tension state, corresponding to three failure modes: DM failure, DMS failure, and DS failure, respectively. [ABSTRACT FROM AUTHOR]