Search

It is well known that sliding-mode control can give good transient performance and system robustness. However, the presence of chattering may introduce problems to the actuators. Many chattering elimination methods use a finite dc gain controller which leads to a finite steady-state error. One method to ensure zero steady-state error is using a proportional plus integral (PI) controller. This paper proposes a fuzzy logic controller which combines a sliding-mode controller (SMC) and a PI controller. The advantages of the SMC and the PI controller can be combined and their disadvantages can be removed. The system stability is proved, although there is one more state variable to be considered in the PI subsystem. An illustrative example shows that good transient and steady-state responses can be obtained by applying the proposed controller. Index Terms--Combining controllers, fuzzy sliding, Lyapunov, stability.

This paper presents the design and stability analysis of a sampled-data neural-network-based control system. A continuous-time nonlinear plant and a sampled-data three-layer fully connected feedforward neural-network-based controller are connected in a closed loop to perform the control task. Stability conditions will be derived to guarantee the closed-loop system stability. Linear-matrix-inequality- and genetic-algorithm-based approaches will be employed to obtain the largest sampling period and the connection weights of the neural network subject to the considerations of the system stability and performance. An application example will be given to illustrate the design procedure and effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper presents a fuzzy controller, which involves a fuzzy combination of local fuzzy and global switching state-feed- back controllers, for nonlinear systems subject to parameter uncertainties with known bounds. The nonlinear system is represented by a fuzzy combined Takagi-Sugeno-Kang model, which is a fuzzy combination of the global and local fuzzy plant models. By combining the local fuzzy and global switching state-feedback controllers using fuzzy logic techniques, the advantages of both controllers can be retained and the undesirable chattering effect introduced by the global switching state-feedback controller can be eliminated. The steady-state error introduced by the global switching state-feedback controller when a saturation function is used can also be removed. Stability conditions, which are related to the system matrices of the local and global closed-loop systems, are derived to guarantee the closed-loop system stability. An application example will be given to demonstrate the merits of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper addresses the optimization and stabilization problems of nonlinear systems subject to parameter uncertainties. The methodology is based on a fuzzy logic approach and an improved genetic algorithm (GA). The TSK fuzzy plant. model is employed to describe the dynamics of the uncertain nonlinear plant. A. fuzzy controller is then obtained to close the feedback Loop. The stability conditions are derived. The feedback gains of the fuzzy controller and the solution for meeting the stability conditions are determined using the improved GA. In order to obtain the optimal fuzzy controller, the membership functions are further tuned by minimizing a defined fitness function using the improved GA. An application example oil stabilizing a two-link robot arm will be given. [ABSTRACT FROM AUTHOR]

Electric load forecasting is essential to improve the reliability of the ac power line data network and provide optimal load scheduling in an intelligent home system. In this paper, a short-term load forecasting realized by a neural fuzzy network (NFN) and a modified genetic algorithm (GA) is proposed. It can forecast the hourly load accurately with respect to different day types and weather information. By introducing new genetic operators, the modified GA performs better than the traditional GA under some benchmark test functions. The optimal network structure can be found by the modified GA when switches in the links of the network are introduced. The membership functions and the number of rules of the NFN can be obtained automatically. Results for a short-term load forecasting will be given. [ABSTRACT FROM AUTHOR]

Presents information on a study which described the tuning of the structure and parameters of a neural network using an improved genetic algorithm. Description of an improve genetic algorithm; Application examples; Conclusions.

Objective: Scoliosis is a spinal deformation in which the spine takes a lateral curvature, generating an angle in the coronal plane. The conventional method for detecting scoliosis is measurement of the Cobb angle in spine images obtained by anterior X-ray scanning. Ultrasound imaging of the spine is found to be less ionising than traditional radiographic modalities. For posterior ultrasound scanning, alternate indices of the spinous process angle (SPA) and ultrasound curve angle (UCA) were developed and have proven comparable to those of the traditional Cobb angle. In SPA, the measurements are made using the spinous processes as an anatomical reference, leading to an underestimation of the traditionally used Cobb angles. Alternatively, in UCA, more lateral features of the spine are employed for measurement of the main thoracic and thoracolumbar angles; however, clear identification of bony features is required. The current practice of UCA angle measurement is manual. This research attempts to automate the process so that the errors related to human intervention can be avoided and the scalability of ultrasound scoliosis diagnosis can be improved. The key objective is to develop an automatic scoliosis diagnosis system using 3-D ultrasound imaging., Methods: The novel diagnosis system is a three-step process: (i) finding the ultrasound spine image with the most visible lateral features using the convolutional RankNet algorithm; (ii) segmenting the bony features from the noisy ultrasound images using joint spine segmentation and noise removal; and (iii) calculating the UCA automatically using a newly developed centroid pairing and inscribed rectangle slope method., Results: The proposed method was evaluated on 109 patients with scoliosis of different severity. The results obtained had a good correlation with manually measured UCAs (R 2 =0.9784 for the main thoracic angle andR 2 =0.9671 for the thoracolumbar angle) and a clinically acceptable mean absolute difference of the main thoracic angle (2.82 ± 2.67°) and thoracolumbar angle (3.34 ± 2.83°)., Conclusion: The proposed method establishes a very promising approach for enabling the applications of economic 3-D ultrasound volume projection imaging for mass screening of scoliosis., Competing Interests: Conflict of Interest Y.P.Z. reports his role as a consultant to Telefield Medical Imaging Limited for the development of Scolioscan, outside the submitted work, and is the inventor of a number of patents related to 3-D ultrasound imaging for scoliosis, which has been licensed to Telefield Medical Imaging Limited through Hong Kong Polytechnic University. He is also a director and shareholder of this startup company. The remaining authors have no conflicts of interest relevant to this article., (Copyright © 2023 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

3D ultrasound imaging has become one of the common diagnosis ways to assess scoliosis since it is radiation-free, real-time, and low-cost. Spine curvature angle measurement is an important step to assess scoliosis precisely. One way to calculate the angle is using the vertebrae features of the 2-D coronal images to identify the most tilted vertebrae. To do the measurement, the segmentation of the transverse vertebrae is an important step. In this paper, we propose a dual-task ultrasound transverse vertebrae segmentation network (D-TVNet) based on U-Net. First, we arrange an auxiliary shape regularization network to learn the contour segmentation of the bones. It improves the boundary segmentation and anti-interference ability of the U-Net by fusing some of the features of the auxiliary task and the main task. Then, we introduce the atrous spatial pyramid pooling (ASPP) module to the end of the down-sampling stage of the main task stream to improve the relative feature extraction ability. To further improve the boundary segmentation, we extendedly fuse the down-sampling output features of the auxiliary network in the ASPP. The experiment results show that the proposed D-TVNet achieves the best dice score of 86.68% and the mean dice score of 86.17% based on cross-validation, which is an improvement of 5.17% over the baseline U-Net. An automatic ultrasound spine bone segmentation network with promising results has been achieved., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Identification of protein-ligand binding site is an important task in structure-based drug design and docking algorithms. In the past two decades, different approaches have been developed to predict the binding site, such as the geometric, energetic, and sequence-based methods. When scores are calculated from these methods, the algorithm for doing classification becomes very important and can affect the prediction results greatly. In this paper, the support vector machine (SVM) is used to cluster the pockets that are most likely to bind ligands with the attributes of geometric characteristics, interaction potential, offset from protein, conservation score, and properties surrounding the pockets. Our approach is compared to LIGSITE, LIGSITE(CSC), SURFNET, Fpocket, PocketFinder, Q-SiteFinder, ConCavity, and MetaPocket on the data set LigASite and 198 drug-target protein complexes. The results show that our approach improves the success rate from 60 to 80 percent at AUC measure and from 61 to 66 percent at top 1 prediction. Our method also provides more comprehensive results than the others.

This paper presents the interpretation of digits and commands using a modified neural network and the genetic algorithm. The modified neural network exhibits a node-to-node relationship which enhances its learning and generalization abilities. A digit-and-command interpreter constructed by the modified neural networks is proposed to recognize handwritten digits and commands. A genetic algorithm is employed to train the parameters of the modified neural networks of the digit-and-command interpreter. The proposed digit-and-command interpreter is successfully realized in an electronic book. Simulation and experimental results will be presented to show the applicability and merits of the proposed approach.