Search

To map the existing evidence regarding the masking ability of resin composites.The literature search was conducted electronically, based on the PRISMA Extension for Scoping Reviews-online protocol at https://osf.io/m2h67/ with no language or time restrictions. Two independent reviewers conducted the screening, and a third reviewer was consulted in case of disagreement. Studies that evaluated resin composite masking ability regardless of background, application technique, thickness, or number of layers were selected. The search found 2995 potentially eligible studies. After removal of duplicates (657), irrelevant articles (2323), 15 citations met the eligibility criteria based on title and abstract, and eight studies were included based on full text analysis (seven in vitro, and one case report). Acceptable masking ability is obtained by one layer of opaque shade resin composite or by the layering technique. A black background is masked with 1.0- to 2.0 mm-thick layers of opaque shade resin composites. Masking of the C4 background is achieved with one layer of 0.5- to 1.5 mm-thick opaque shade resin composite or by the layering technique using different combinations of enamel body and dentin shades with a final thickness of 1.5 mm.Acceptable masking of C4 shade background is achieved with one layer of opaque shade composite at least 0.5 mm-thick or by different combinations of the layering technique, with a final thickness of 1.5 mm. Acceptable masking of the black background of the oral cavity is achieved with a resin composite of at least 1.0 mm opaque shade.The thickness of the resin composite layer required to achieve adequate masking is variable and depends on the translucency/opacity of the tested resin composites and the background shade.

To evaluate the effect of layering strategy and substrate color on the masking ability of resin composites.A1-shaded specimens from Charisma Diamond and Filtek Z350XT were produced using different layering strategies. Color measurements were made by a reflectance spectrophotometer over A2, C2, A3.5, C3, C4 substrates. Color differences were calculated and interpreted by the 50%:50% perceptibility and acceptability visual thresholds. Data was analyzed by Kruskal-Wallis and Dunn post hoc test. Chi-square test was used to determine the association between masking ability, and independent variables.Color differences were significantly lower on A2 and C2 in comparison with C4 for the majority of the layering strategies. Acceptable matches were observed on most of the combinations over A2. Moderately unacceptable mismatches were observed in most of the combinations over C2 and A3.5. Clearly unacceptable mismatches were observed on the C3 and C4. The ΔEMasking ability was affected by the layering strategy and substrate color. Acceptable masking was associated with A2 and C2, and with layering strategy composed of 0.5 mm enamel opacity and 1.0 mm dentin opacity thicknesses, using the Filtek Z350XT.Resin composites-shade A1-applied by different layering strategies with a final thickness of 1.5 mm were able to mask mild and moderately discolored substrates. Severely discolored substrates were not masked effectively.

Objective To evaluate color, lightness, chroma, hue, and translucency adjustment potential of resin composites using CIEDE2000 color difference formula. Methods Three resin composites (Filtek Universal, Harmonize, and Omnichroma) were tested. Two types of specimens were prepared: an outer base shade with an inner hole filled with test shades and single-composite specimens of all shades. Spectrorradiometric reflectances measurements and subsequent CIELAB color coordinates and translucency parameter (TP) were performed. Color (CAP00 ), lightness, chroma, hue, and translucency (TAP00 ) adjustment potential using CIEDE2000 color difference were computed. Color and transparency differences among composite materials and shades were statistically tested (P Results Positive CAP00 and TAP00 values were found for majority of tested materials. CAP00 values ranged from -0.14 to 0.89, with the highest values found for Omnichroma (>0.75 in all cases). TAP00 values ranged from -0.06 to 0.86 with significant translucency differences among dual and single specimens. Omnichroma exhibited the highest adjustment potential for all color dimensions studied. Conclusions Lightness, hue, chroma, and translucency adjustment potential have been introduced using CIEDE2000 color difference formula, and have shown their usefulness to evaluate blending effect in dentistry. Color coordinates and translucency adjustment potential were dependent on dental material. Omnichroma exhibited the most pronounced blending effect. Clinical significance Resin composites with increased color and translucency adjustment may simplify shade selection, making this process easier and less time consuming. Furthermore, these materials might facilitate challenging and complex color matching situations.

As tecnologias podem ser potentes facilitadoras do processo de aprendizagem dos alunos, principalmente nas gerações atuais. Os smartphones são ferramentas rotineiramente utilizadas a qualquer momento e em qualquer lugar na busca de variadas informações. Assim, a aquisição de conhecimento por meio deste dispositivo móvel, alinhada com as perspectivas de ensino e resultados esperados para o aprendizado, parece fazer cada vez mais sentido. Neste contexto, este estudo foi proposto com o objetivo de conhecer o perfil do uso de smartphones como ferramenta de aprendizagem ativa e móvel por estudantes de Odontologia. Trata-se de um estudo transversal, realizado por meio de um questionário eletrônico, composto por perguntas objetivas e abertas, as quais avaliaram características sociodemográficas, tipo de aparelho e conexão, uso geral e para aprendizado odontológico, bem como a atitude dos alunos em relação ao uso. Do total de estudantes elegíveis ao estudo, 169 alunos responderam ao questionário (taxa de resposta de 49,1%). A maioria dos participantes eram mulheres, com faixa etária de 19 a 21 anos. Todos os estudantes afirmaram ter smartphone, com conexão à internet. Os principais usos descritos foram relacionados à comunicação, gerenciamento de tempo e educação. As vantagens relatadas foram praticidade, flexibilidade de uso, acesso a diferentes conteúdos, capacidade de pesquisar informações e de se comunicar rapidamente. Os desafios identificados incluíram distração e excesso de uso. Os resultados permitiram concluir que os estudantes utilizam os smartphones como ferramenta de aprendizagem ativa, principalmente, para acessar e-books, artigos científicos, escutar podcasts, assistir lives e visualizar publicações de conteúdos teóricos e práticos no Instagram.

SUMMARY The aim of this study was to evaluate the masking ability of a combined application of opaquers and resin composite over discolored backgrounds: A3, A3.5, C2, C3, and C4. The groups were divided according to the opaquer brand, the number of opaquer coats (one or two), and the thickness of the resin composite layer (0.5 or 1.0 mm). The color measurements were made by a reflectance spectrophotometer (SP60, EX-Rite). The color difference between the opaquer + resin composite + background and a reference background was calculated using the CIEDE2000 formula. ANOVA and Tukey’s post hoc test (α=0.05) were used to analyze the ΔE00 mean values. A bivariate analysis was used to determine the association between dependent and independent variables. The masking ability was rated by the ΔE00 visual thresholds of acceptability and perceptibility (Excellent Match: ΔE00 ≤ 0.8; Acceptable Match: 0.8 < ΔE00 ≤1.8; Moderately Unacceptable Mismatch: 1.8 < ΔE00 ≤ 3.6; Clearly Unacceptable Mismatch: 3.6 < ΔE00 ≤ 5.4; Extremely Unacceptable Mismatch: ΔE00 > 5.4). The mean ΔE00 values ranged from 0.5 to 5.52. Masking ability was affected by the opaquer brand, thickness of the resin composite layer, and background shades. Most of the combinations that achieved either excellent or acceptable masking ability were obtained with combinations composed of one or two coats of opaquer and a 1.0-mm-thick resin composite layer for all backgrounds except C4. Acceptable results were also obtained for combinations with 0.5-mm-thick resin composite over C2, A3, and A3.5 backgrounds.

Introduction Longevity and clinical success of dental restorations can be influenced by many factors during the restorative procedures. Objective This study aimed to evaluate the influence of different placement techniques on color stability and surface roughness of two resin composites. Material and method The groups of specimens (n=10) were divided according to resin composite (FiltekTM Z250 XT and FiltekTM Z350 XT) and placement technique: Mylar strip, spatula, dry brush, modeling liquid, and surface sealant. Color stability and surface roughness were accessed using a spectrophotometer (CIELab color space) and a rugosimeter (standard cutoff of 0.8 mm), respectively, after water storage. Subsequently, the specimens were immersed in coffee for 48 h and final color was measured. The data were analyzed using ANOVA and the Tukey’s post hoc test (α=5%) and the correlation between surface roughness (Ra) and color change (∆Eab) was assessed using the Pearson’s correlation coefficient. Result The different placement techniques influenced Ra and ∆Eab on both resin composites. The groups treated with surface sealant showed greater difference in ∆Eab for both resin composites. The FiltekTM Z250 XT resin showed greater color stability compared with the FiltekTM Z350 XT resin regardless of the placement technique used. Ra of each placement technique was similar among the resin composites except for the FiltekTM Z350 XT modeling liquid group, which presented lower Ra values compared with those of FiltekTM Z250 XT. A correlation between Ra and staining was identified (p=0.268). Conclusion Color stability and Ra are influenced by different placement techniques. Resumo Introdução A longevidade e o sucesso clínico das restaurações dentárias podem ser influenciados por muitos fatores durante os procedimentos restauradores. Objetivo Avaliar a influência da técnica de alisamento na estabilidade de cor e rugosidade superficial de duas resinas compostas. Material e método Os grupos de amostras (n=10) foram divididos conforme a resina composta (FiltekTM Z250 XT e FiltekTM Z350 XT) e as técnicas empregadas: tira de poliéster, espátula, pincel seco, selante de superfície. A cor e a rugosidade da superfície foram avaliadas por espectrofotômetro (espaço de cor CIELab) e rugosímetro (corte padrão de 0,8 mm), respectivamente, após o armazenamento em água. Posteriormente, as amostras foram imersas em café por 48h e a cor final foi aferida. Os dados foram analisados usando teste ANOVA e Tukey post hoc (α = 5%) e a correlação entre rugosidade da superfície (Ra) e variação de cor (∆Eab) através do coeficiente de correlação de Pearson. Resultado As técnicas de alisamento influenciaram a Ra e a ∆Eab em ambas as resinas compostas. Os grupos tratados com selante de superfície apresentaram maior diferença na ∆Eab. A resina FiltekTM Z250 XT apresentou maior estabilidade de cor comparada à FiltekTM Z350 XT, independentemente da técnica utilizada. A Ra das técnicas de alisamento foi semelhante entre os compósitos, exceto para o grupo do líquido modelador da FiltekTM Z350 XT, que apresentou os menores valores. Uma correlação entre Ra e manchamento (p = 0,268) foi identificada. Conclusão A estabilidade da cor e a Ra são influenciadas pelas técnicas de alisamento utilizadas.

Objective Evaluate the masking ability of bleach-shade resin composites applied by multilayering techniques over colored substrates. Materials and methods Disc-shaped specimens were fabricated from bleach-shade resin composites using different multilayering techniques. Substrates were produced in opaque ceramic discs simulating colored substrates (A2, A3, A3.5, C2, C3, C4) and a bleached tooth (0M1). Color coordinates were obtained using a reflectance spectrophotometer. Color difference was calculated by CIEDE2000 using coordinates of 0 M1 ceramic as standard reference. Data were analyzed by one-way ANOVA and Tukey's post-hoc test (p ≤ 0.05). Masking ability interpretation was based on perceptibility and acceptability thresholds. Results All combinations presented ΔE00 above the acceptable threshold (ΔE00 >1.8), ranging from 2.49 to 7.42, regardless of the restorative system, multilayering strategy or substrate color. Multilayering combinations placed over A2, A3 and A3.5 were moderately (1.8 5.4). Lower ΔE00 was observed for combinations with 0.5 mm extra white enamel layer (2.49), or 1.0 mm white dentin layer (2.69), over A2 and A3.5 substrates. Lightness difference showed the greatest contribution to ΔE00 . Conclusions Bleach-shade resin composite systems applied by the multilayering technique were not able to ensure effective masking ability. Clinical significance Bleach-shade resin composites applied with different combinations of the multilayering technique were not effective in masking colored substrates. Alternative strategies, techniques and dental materials should be explored to obtain acceptable masking.

SUMMARY The purpose of this study was to evaluate the ability of three resin composite systems to mask a severely discolored background by the application of a layering technique through CIELAB and CIEDE2000 analysis. Ninety 1.5-mm-thick disc specimens were produced from three different resin composite restoration systems: IPS Empress Direct (Ivoclar Vivadent), Charisma Diamond (Heraeus Kulzer), and Filtek Z350 XT (3M-ESPE). The specimens were divided into groups according to the restoration system and the resin composite shade combination used for the layering technique (enamel, body, and dentin shades). Color measurements were performed by a reflectance spectrophotometer (SP60, EX-Rite) against a C4 shade background and an inherent color background, which simulates a severely discolored background and a tooth surface with no discoloration, respectively. The total color difference between both color measurements was calculated by CIELAB (ΔE*ab) and CIEDE2000 (ΔE00) formulas. The mean ΔEab* and ΔE00 values were analyzed by analysis of variance (general linear models) and Tukey's post hoc tests (α=0.05). Three groups presented clinically acceptable color difference values (ΔE*≦3.46 and ΔE00≦2.25): 1.5 mm dentin, 1.0 mm dentin/0.5 mm body, and 1.0 mm dentin/0.5 mm enamel; ie, all the groups from the Z350 XT restoration system. The resin composite layering technique is an effective way to mask severely discolored backgrounds. The Filtek Z350 XT system was the only restoration system capable of masking the C4 background.

SUMMARY The aim of this study was to evaluate the effectiveness of the layering technique to mask a discolored background (C4) after one year of water aging. The technique was used with three resin composite restorative systems (IPS Empress Direct, Charisma Diamond, and Filtek Z350XT). Ninety 1.5-mm-thick specimens were divided into groups and subgroups according to the restorative system and resin composite shade combination used in the layering technique (enamel, body, and dentin). The color measurements were made by reflection spectrophotometer (SP60, EX-Rite) over the C4 substrate at two time points: after 24-hour water immersion (T0) and after one-year water aging (T1). The masking ability was evaluated by calculating the ΔE between an inherent color background and a C4 background at T0 and T1. CIELAB and CIEDE2000 formulas were used for comparative analysis between T0 and T1 color measurements. Analysis of variance and Turkey's post hoc test (a=0.05) were performed to analyze ΔEab and ΔE00 mean values. The Z350XT restorative system presented adequate masking ability in the combinations of 0.5 mm body + 1.0 mm dentin, 0.5 mm enamel + 1.0 mm dentin, and 1.5 mm dentin after 24-hour water immersion. The masking ability was affected negatively by water aging in most of the combinations. The IPS Empress Direct was the only system that remained stable after aging in the combinations of 0.5 mm enamel + 1.0 mm dentin and + 1.5 mm dentin (p=0.05 and p=0.47 for CIELAB; p=0.15 and p=0.51 for CIEDE2000), although it did not present adequate masking ability in both time points. None of the combinations of any system presented adequate masking ability after prolonged water aging.

The pigmentation of the resin cement at the tooth/ceramic interface compromises the esthetic and longevity of ultra-thin ceramic veneers. Aim: The aim of this study was to evaluate marginal staining of ultra-thin ceramic veneers cemented to intact enamel (non-prepared) and prepared enamel. Methods: Thirty-two (32) permanent central incisors were selected and randomly divided into two groups: intact enamel (IE) and prepared enamel (PE). The ceramic veneers of PE group were bonded to the prepared enamel and the ceramic veneers of IE group were cemented directly onto the intact enamel, with no preparation. Both preparation and cementation were standardized and performed by a single operator. Each group was subdivided into two subgroups (n = 8) with different immersion media - coffee and water. After an immersion period of 10 days, stereomicroscope images were made at 20X magnification of the mesial, distal, cervical and incisal surface of each specimen. Three blinded, trained and calibrated examiners evaluated the images of the resin cement interface of each surface. The data were subjected to Kruskal‑Wallis and Mann‑Whitney statistical analysis. Immersion media and enamel preparation influenced the marginal staining of the tooth/ceramic interface. Results: When immersed in coffee, prepared interfaces presented greater marginal staining than unprepared interfaces. When immersed in water, there was no statistically significant difference between the groups. Conclusion: The cementation of ultra-thin ceramic veneers onto intact enamel is associated with less marginal staining and, consequently, improved esthetics.

This study aims to investigate the influence of the presence, shape and depth of NCCLs on the mechanical response of a maxillary second premolar subjected to functional and non-functional occlusal loadings using 3-D finite element (FE) analysis. A three-dimensional model of a maxillary second premolar and its supporting bone was constructed based on the contours of their cross-sections. From the sound model, cervical defects having either V- or U-shapes, as found clinically, were subtracted in three different depths. The models were loaded with 105 N to simulate normal chewing forces according to a functional occlusal loading (F1) vertically applied and two non-functional loadings (F2 and F3) obliquely oriented. Two alveolar bone crest heights were tested. Ansys™ FE software was used to compute stress distributions and maximum principal stress for each of the models. The presence of a lesion had no effect on the overall stress distribution of the system, but affected local stress concentrations. Non-functional loadings exhibited tensile stresses concentrating at the cervical areas and root surfaces, while the functional loading resulted in homogeneous stress distributions within the tooth. V-shaped lesions showed higher stress levels concentrated at the zenith of the lesion, whereas in U-shaped defect stresses concentrated over a wider area. As the lesions advanced in depth, the stress was amplified at their deepest part. A trend of stress amplification was observed with decreasing bone height. These results suggest a non-linear lesion progression with time, with the progression rate increasing with patient's age (deeper lesions and lower bone support).

Introduction The development and validation of mathematical models is an important step of the methodology of finite element studies. Objective This study aims to describe the development and validation of a three-dimensional numerical model of a maxillary premolar for finite element analysis. Material and method The 3D model was based on standardized photographs of sequential slices of an intact premolar and generated with the use of SolidWorks Software (Dassault, France). In order to validate the model, compression and numerical tests were performed. The load versus displacement graphs of both tests were visually compared, the percentage of error calculated and homogeneity of regression coefficients tested. Result An accurate 3D model was developed and validated since the graphs were visually similar, the percentage error was within acceptable limits, and the straight lines were considered parallel. Conclusion The modeling procedures and validation described allows the development of accurate 3D dental models with biomechanical behavior similar to natural teeth. The methods may be applied in development and validation of new models and computer-aided simulations using FEM. Resumo Introdução O desenvolvimento e validação de modelos matemáticos é uma importante etapa da metodologia de estudos de elementos finitos. Objetivo Este estudo tem o objetivo descrever o desenvolvimento e validação de um modelo numérico tridimensional de um pré-molar superior para análise em elementos finitos. Material e método Fotografias padronizadas de cortes sequenciais de um pré-molar hígido serviram de referência para o desenvolvimento do modelo 3D, que foi construído por meio do programa SolidWorks (Dassault, França). A fim de validar o modelo testes de compressão e simulação numérica foram realizados. Os gráficos de carga versus deslocamento de ambos os ensaios foram comparados visualmente, a percentagem de erro calculada e homogeneidade dos coeficientes de regressão testada. Resultado Um modelo 3D preciso foi desenvolvido e validado, uma vez que os gráficos apresentavam-se visualmente semelhantes, o percentual de erro ficou dentro dos limites aceitáveis e as retas foram consideradas paralelas. Conclusão Os procedimentos de modelagem e validação descritos permitem o desenvolvimento de modelos dentários 3D precisos com comportamento biomecânico semelhante aos dentes naturais. Os métodos podem ser aplicados no desenvolvimento e validação de novos modelos e estudos de simulações computacionais por meio do MEF.

There are few instruments available in Brazil for obtaining data on dental erosion among adults. For this reason, the interview entitled “A Survey on Hong Kong People’s Dietary Behavior in Relations to Acid Erosion”, published in English, was considered for translation. The aim of this study was to perform a cross-cultural adaptation and content validation for the Brazilian population. After obtaining the author’s permission, the interview underwent several stages: translation, back translation, review by a bilingual person and a committee of experts, administration of the English instrument and of the Portuguese version to a bilingual group, and pretesting in a convenience sample of 50 adults. The interview was translated and adapted to the Portuguese language and the Brazilian culture. The analysis of the data revealed that the interview was easy to apply, conduct and understand; therefore, it was considered viable and capable of being used in different studies.

Background: In vitro staining methods expose the entire specimen to staining solutions. In a real clinical situation, this is not observed, since one should consider that the bonded surface is not exposed to the oral environment. Theoretically, the clinical condition would be the best simulated if the specimens were exposed to staining solutions by partial immersion. Aims: To evaluate if different immersion methods and surface treatments influence the color stability of resin-based specimens. Methodology: A stainless steel matrix was used to prepare 30 disc-shaped specimens that were randomly allocated in three groups: Without polishing, polishing with abrasive discs, and surface sealant. Half of the specimens were isolated to maintain only the upper surface exposed to staining (partial immersion) and the other half was totally immersed in coffee solution for 48 h (total immersion). The coordinates ΔE*, ΔL*, Δa*, Δb* were assessed by spectrophotometer. Statistical Analysis: Two-way ANOVA and Tukey's post hoc tests ( α =0.05). Results: Specimens submitted to partial immersion showed lower values of ΔE*, ΔL*, Δa*, Δb*, in comparison to total immersion ( P = 0.000). Specimens covered by a surface sealant presented lower ΔE* values regardless of the immersion method. Conclusions: Specimens totally immersed in staining solutions could in somehow overestimate the color change, once that in most clinical conditions not all of the restoration surfaces are exposed to the oral environment. Moreover, as the surface sealant application produces color change values that are clinically acceptable, it might be used in esthetic restorations as an adjunct treatment.

Introduction: Controlling the surface smoothness characteristics of the composite resin when performing a direct restorative technique is one of the factors involved in achieving restorative success. Objective: The purpose of this study was to evaluate the surface roughness of a nanofilled composite resin submitted to different smoothing and finishing techniques. Material and method: Fifty test specimens were made with the Z350 XT composite resin (3M ESPE) and then divided into five study groups according to the smoothing and finishing method applied, as follows: G1 (control), polyester strip; G2, composite spatula; G3, brush cleaned with absolute alcohol and dried; G4, brush cleaned with absolute alcohol, dried and moistened with Single Bond (3M ESPE); and G5, brush cleaned with absolute alcohol, dried and moistened with Natural Glaze surface sealant (DFL). After fabrication, the specimens were stored for 24 h in deionized water. The surface roughness of the specimens was measured using a profilometer. Surface roughness means were compared by analysis of variance followed by Tukey’s test at a level of significance of 5%. Result: The lowest surface roughness was observed in G1 (control group) and the highest, in G3. G5 had lower surface roughness values compared to the other test groups, and presented values similar to those of the control group. Conclusion: The smoothing and finishing techniques influenced the surface roughness of the composite resin. Application of the surface sealant by the copolymerization technique resulted in lower roughness values. The use of a clean, dry brush promoted roughness values beyond the acceptable limit, and is therefore liable to compromise the performance of composite resin restorations. Resumo Introdução: O controle da técnica restauradora direta com resina composta no que se refere às características de lisura superficial, é um dos fatores que deve ser considerado para o sucesso restaurador. Objetivo: O propósito deste estudo foi avaliar a rugosidade superficial de uma resina composta nanoparticulada submetida a diferentes técnicas de alisamento e finalização. Material e método: Cinquenta corpos de prova foram confeccionados utilizando a resina composta Z 350 XT (3M ESPE), divididos em cinco grupos sendo: G1 (controle): padrão tira de poliéster; G2: espátula para inserção de resina; G3 pincel limpo com álcool e seco; G4; pincel limpo com álcool, seco e umedecido com adesivo Single Bond (3M ESPE); e, G5: pincel limpo álcool, seco e umedecido com selante de superfície Natural Glaze (DFL). Após a confecção os corpos de prova foram estocados por 24 horas em água deionizada. A rugosidade superficial foi mensurada por meio de um rugosímetro de precisão. As médias foram comparadas por análise de variância, seguida do Teste de Tukey a 5% de significância. Resultado: A menor rugosidade superficial foi observada em G1 e a maior em G3 O grupo G5, apresentou valores de rugosidade superficial inferiores aos demais grupos testados e próximos ao grupo controle. Conclusão: As técnicas de alisamento e finalização influenciaram a rugosidade superficial da resina composta. O uso de selante resinoso, pela técnica de copolimerização, resultou em menor rugosidade e o emprego do pincel limpo e seco promoveu rugosidade, além do limite aceitável o que pode comprometer o desempenho de restaurações.