Search

Plasmonic oligomers composed of metallic nanoparticles are one class of the most promising platforms for generating Fano resonances with unprecedented optical properties for enhancing various linear and nonlinear optical processes. For efficient generation of second-harmonic emissions at multiple wavelength bands, it is critical to design a plasmonic oligomer concurrently having multiple Fano resonances spectrally matching the fundamental excitation wavelengths and multiple plasmon resonance modes coinciding with the harmonic wavelengths. Thus far, the realization of such a plasmonic oligomer remains a challenge. This study demonstrates both theoretically and experimentally that a plasmonic nonamer consisting of a gold nanocross surrounded by eight nanorods simultaneously sustains multiple polarization-independent Fano resonances in the near-infrared region and several higher-order plasmon resonances in the visible spectrum. Due to coherent amplification of the nonlinear excitation sources by the Fano resonances and efficient scattering-enhanced outcoupling by the higher-order modes, the second-harmonic emission of the nonamer is significantly increased at multiple spectral bands, and their spectral positions and radiation patterns can be flexibly manipulated by easily tuning the length of the surrounding nanorods in the nonamer. These results provide us with important implications for realizing ultrafast multichannel nonlinear optoelectronic devices.

In this paper, symmetric and asymmetric tapering on the arms of the gammadion nanostructure is proposed to enhance both local field distribution and extinction difference (ED). The asymmetric tapered gammadion with tapering fraction (TF) of 0.67 is seen to have the largest ED and spatial local field distribution, producing a large wavelength shift of more than 50 percent as compared to the untapered gammadion nanostructures when immersed in a solution of actin molecules and filaments. The optical chirality, ζ shows that the larger local field amplitudes produced by the asymmetric designs increases the rate of chiral molecules excitation. This enhanced field is strongly rotating and highly sensitive to single molecules and larger filaments. Here, we show that the ED, optical chirality, sensitivity and rate of chiral molecules excitation can be improved by incorporating asymmetric designs into chiral gammadion nanostructures through tapering.

Active plasmonics has been an interesting and important topic recently. Here we demonstrate the all-optical, polarization-insensitive tunable manipulation of a hybrid system that integrates a silver nanorod array with photoresponsive liquid crystals. The large-area plasmonic nanorod arrays are fabricated by laser interference lithography and ion milling. By covering a layer of photoresponsive liquid crystals, tunable control of plasmon resonance is achieved under an external light pump. The silver nanorod array also enables the homeotropic alignment of the liquid crystals, which makes the all-optical tuning behavior polarization-insensitive. With its advantages of cost-effective fabrication, easy integration, all-optical control, and polarization-insensitivity, the hybrid system could be valuable in many nanophotonic applications.

We demonstrate polarization-dependent plasmon-induced transparency in coupled triangle-rod arrays. The observed phenomenon is the result of the destructive interference between the bright and dark resonators in this coupled system, which is verified through the numerical simulations using the finite-difference time-domain (FDTD) method. By precisely controlling the structural parameters of the coupled triangle-rod system, the plasmon-induced transparency can be effectively manipulated. This plasmonically coupled nanostructure could be potentially useful for designing and developing artificial plasmonic molecules and metamaterials with desired functions, which may further find promising applications in biosensing, nanoparticle trapping and optical filters.

We report on a broad color tuning effect covering the visible range from a single plasmonic chip. By simply tilting the orientation of the designed plasmonic chip within a certain range, the photon-plasmon coupling interactions between the incident light and the plasmonic nanostructures on the chip can be finely tuned, resulting in an angle-dependent continuous color filtering effect. The physical mechanism of the device is investigated through the full-wave calculations, which provide important guidance for the design and optimization of the proposed devices. The broad color tuning from the demonstrated single chip will potentially benefit visualization and display technologies, and is particularly useful for the construction of reflection-based spatial light modulators.

We report significantly enhanced magnetic resonance by fluid infiltration in a free-standing metamaterial that consists of metal-dielectric-metal films on an ultrathin Si3N4 membrane patterned with etched through nanohole arrays. When different fluids are drop-casted on the structure, the magnetic resonance has high sensitivities of 282 nm per RIU in peak shift and 12% per RIU in peak intensity change, whereas the electric resonance has nearly no changes. This work shows a promising way of using fluids to actively tune the magnetic resonance of metamaterial structures by combining with micro/nano-fluidic technologies.

Noble metal and metal-dielectric-metal ultrathin films were deposited on the surfaces of ultrafine polymeric nanogratings, which were fabricated using nanoimprint lithography. Experimental results showed dramatic differences of the surface morphologies for single metal and triple metal-dielectric-metal films deposited on flat and corrugated polymeric surfaces. The effect of the surface morphology on the optical properties was hence investigated and analyzed under linearly polarized light. The surface plasmon resonances of single metal and triple metal-dielectric-metal films deposited on polymeric nanograting surfaces were also characterized based on the Kretschmann prism-coupling method. The single metal and triple metal-dielectric-metal films deposited on polymeric nanograting surfaces are important for the study of photon-plasmon interactions (i.e. couplings and conversions) at the interfaces between a nanograting and metal films.

We report holographic polymer-dispersed liquid crystal (H-PDLC) gratings driven by surface acoustic waves (SAWs). Our experiments show that upon applying SAWs, the H-PDLC grating exhibited switchable properties: The diffraction of the H-PDLC grating decreased, whereas the transmission increased. This acoustically switchable behavior is due to the acoustic streaming-induced realignment of liquid crystals as well as absorption-resulted thermal diffusion. Such SAW-driven H-PDLC gratings are potentially useful in many photonic applications, such as optical switches, spatial light modulators, and switchable add/drop filters.

Ultrafine 50 nm line and space nanogratings were fabricated using nanoimprint lithography, and were further used as an alignment layer for liquid crystals. The surface morphologies of the nanogratings were characterized and their surface energies were estimated through the measurement of the contact angles for two different liquids. Experimental results show that the surface energies of the nanogratings are anisotropic: the surface free energy towards the direction parallel to the grating lines is higher than that in the direction perpendicular to the grating lines. Electro-optical characteristics were tested from a twisted nematic liquid crystal cell, which was assembled using two identical nanogratings. Experimental results show that such a kind of nanograting is promising as an alternative to the conventional rubbing process for liquid crystal alignment.

Bridged ZnO nanorod arrays on a V-grooved Si(100) substrate were used as the photoanode of a photoelectrochemical (PEC) cell for water splitting. Photolithography followed by reactive ion etching was employed to create a V-grooved structure on a Si substrate. ZnO nanorod arrays were grown via a hydrothermal method. The light trapping and PEC properties are greatly enhanced using the bridged ZnO nanorod arrays on a V-grooved Si substrate compared with those on a flat one. Increased short circuit photocurrent density (J(SC), 0.73 mA cm(-2)) and half-life time (1500 s) are achieved. This improved J(SC) and half-life time are 4 times and 10 times, respectively, higher than those of the ZnO nanorod arrays grown on a flat substrate. The overall PEC cell performance improvement for the V-groove grown ZnO array is attributed to the reduced light reflection and enhanced light trapping effect. Moreover, V-groove ZnO showed stronger adhesion between ZnO nanorod arrays and the substrate.

The effect of surface morphology on the optical properties in a metal-dielectric-metal (MDM) thin film was investigated. Ag films were thermally evaporated at different rates to obtain different surface roughnesses and grain sizes. The reflectance spectra of the Ag/MgF(2)/Ag films show a dip due to surface-roughness-induced excitation of surface plasmon polaritons. The dip position varies from 650 to 800 nm, depending on the surface morphology of the multilayered film. An empirical relationship was found between the optical properties (i.e., the dip position and its linewidth) and the Ag film structural properties (i.e., surface roughness, grain size, and filling factor). The causes of and contributions to the shift of the dip position and the linewidth of the dip were discussed. The study is important to metal-dielectric-based structures, and the unique feature of such a MDM film could be used for color filters., (© 2011 American Chemical Society)

We report the first photoluminescence (PL) characterization of InAs nanowires (NWs). The InAs NWs were grown on GaAs(111) B and Si(111) substrates using the Au-assisted molecular beam epitaxy (MBE) growth technique or metal-organic chemical vapor deposition (MOCVD). We compared the PL response of four samples grown under different conditions using MBE or MOCVD. High-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) patterns were utilized to determine the crystal structure and growth directions of the NWs to relate PL features to NW structural parameters. We observed mainly three PL peaks which were below, near and above InAs bandgaps, respectively. Temperature and excitation intensity dependence PL measurements were also performed to help elucidate the origins of the PL peaks of NWs. Of particular interest was a band-edge emission peak that was blue-shifted due to quantization effects of the InAs NWs, as confirmed by our calculation.

This paper reports an effective method to enhance the surface plasmon resonance (SPR) on Ag films by using a thin Ni seed layer assisted deposition. Ag films with a thickness of about 50 nm were deposited by electron beam evaporation above an ultrathin Ni seed layer of approximately 2 nm on both silicon and quartz substrates. The root-mean-square (rms) surface roughness and the correlation length have been reduced from >4 nm and 28 nm for a pure Ag film to approximately 1.3 and 19 nm for Ag/Ni films, respectively. Both experimental and simulation results show that the Ag/Ni films exhibit an enhanced SPR over the pure Ag film with a narrower full width at half-maximum. Ag films with a Ge seed layer have also been prepared under the same conditions. The surface roughness can be reduced to less than 0.7 nm, but narrowing of the SPR curve is not observed due to increased absorptive damping in the Ge seed layer. Our results show that Ni acts as a roughness-diminishing growth layer for the Ag film while at the same time maintaining and enhancing the plasmonic properties of the combined structures. This points toward its use for low-loss plasmonic devices and optical metamaterials applications.

We demonstrate lasing in Metal-Insulator-Metal (MIM) waveguides filled with electrically pumped semiconductor cores, with core width dimensions below the diffraction limit. Furthermore these waveguides propagate a transverse magnetic (TM0) or so called gap plasmon mode [1-4]. Hence we show that losses in sub-wavelength MIM waveguides can be overcome to create small plasmon mode lasers at wavelengths near 1500 nm. We also give results showing room temperature lasing in MIM waveguides, with approximately 310 nm wide semiconductor cores which propagate a transverse electric mode.

By controlling local substrate temperature in a chemical vapor deposition system, we have successfully achieved spatial composition grading covering the complete composition range of ternary alloy CdSSe nanowires on a single substrate of 1.2 cm in length. Spatial photoluminescence scan along the substrate length shows peak wavelength changes continuously from approximately 500 to approximately 700 nm. Furthermore, we show that under strong optical pumping, every spot along the substrate length displays lasing behavior. Thus our nanowire chip provides a spatially continuously tunable laser with a superbroad wavelength tuning range, unmatched by any other available semiconductor-based technology.

We report the formation of a stable superhydrophobic surface via aligned carbon nanotubes (CNTs) coated with a zinc oxide (ZnO) thin film. The CNT template was synthesized by chemical vapor deposition on an Fe-N catalyst layer. The ZnO film, with a low surface energy, was deposited on the CNT template by the filtered cathodic vacuum arc technique. Contact angle measurement reveals that the surface of the ZnO-coated CNTs is superhydrophobic with water contact angle of 159 degrees . Unlike the uncoated CNTs surface, the ZnO-coated CNTs surface shows no sign of water seepage even after a prolonged period of time. The wettability of the surface can be reversibly changed from superhydrophobicity to hydrophilicity by alternation of ultraviolet (UV) irradiation and dark storage.