Search

Biological mechanisms that rely on signal integration and processing are fundamental for cell function. These types of capabilities are analogous to those found in electronic circuits where individual components perform operations on input signals. In electronics, bandpass filters are crucial components to narrow frequencies within a specified range and reject frequencies outside of that range. However, no generalizable protein-based components are currently available to mimic such processes in engineered biological systems, representing an unmet need in controllable modules. Here, we propose a rational design approach to create protein-basedchemically responsive bandpass filters(CBP) which pass chemical concentrations within a range and reject concentrations outside of that range, showing an OFF-ON-OFF regulatory pattern. The CBPs were designed using structure-based approaches where we created a heterodimeric construct which the assembly is triggered by low concentration of a small-molecule, and this interaction is inhibited at high concentrations of the drug, effectively creating a bandpass filter. The CBPs have a multidomain architecture where we used known drug-receptors, a computationally designed protein binder and small-molecule inhibitors. Owing to the modularity of the system, each domain of the CBPs can be rationally fine-tuned to optimize its performance, including bandwidth, maximum response, cutoff concentration and fold changes. These CBPs were used to regulate cell surface receptor signaling pathways showing the capability to control cellular activities in engineered cells.

Protein-based therapeutics such as monoclonal antibodies and cytokines are important therapies in various pathophysiological conditions such as oncology, auto-immune disorders, and viral infections. However, the wide application of such protein therapeutics is often hindered by dose-limiting toxicities and adverse effects, namely cytokine storm syndrome, organ failure and others. Therefore, spatiotemporal control of the activities of these proteins is crucial to further expand their application. Here, we report the design and application of small molecule-controlled switchable protein therapeutics by taking advantage of a previously engineered OFF-switch system. We used Rosetta modeling suite to computationally optimize the affinity between B-cell lymphoma 2 (Bcl-2) protein and a previously developed computationally designed protein partner (LD3) to obtain a fast and efficient heterodimer disruption upon addition of a competing drug (Venetoclax). The incorporation of the engineered OFF-switch system intoαCTLA4, anti-HER2 antibodies or an Fc-fused IL-15 cytokine demonstrated an efficient disruption in vitro, as well as fast clearance in vivo upon addition of the competing drug Venetoclax. These results provide a proof-of-concept for the rational design of controllable biologics by introducing a drug-induced OFF-switch into existing protein-based therapeutics.

De novo protein design has enabled the creation of new protein structures. However, the design of functional proteins has proved challenging, in part due to the difficulty of transplanting structurally complex functional sites to available protein structures. Here, we used a bottom-up approach to build de novo proteins tailored to accommodate structurally complex functional motifs. We applied the bottom-up strategy to successfully design five folds for four distinct binding motifs, including a bifunctionalized protein with two motifs. Crystal structures confirmed the atomic-level accuracy of the computational designs. These de novo proteins were functional as components of biosensors to monitor antibody responses and as orthogonal ligands to modulate synthetic signaling receptors in engineered mammalian cells. Our work demonstrates the potential of bottom-up approaches to accommodate complex structural motifs, which will be essential to endow de novo proteins with elaborate biochemical functions, such as molecular recognition or catalysis. [Figure not available: see fulltext.]

Cellular therapies remain constrained by the limited availability of sensors for disease markers. Here we present an integrated target-to-receptor pipeline for constructing a customizable advanced modular bispecific extracellular receptor (AMBER) that combines our generalized extracellular molecule sensor (GEMS) system with a high-throughput platform for generating designed ankyrin repeat proteins (DARPins). For proof of concept, we chose human fibrin degradation products (FDPs) as markers with high clinical relevance and screened a DARPin library for FDP binders. We built AMBERs equipped with 19 different DARPins selected from 160 hits, and found 4 of them to be functional as heterodimers with a known single-chain variable fragments binder. Tandem receptors consisting of combinations of the validated DARPins are also functional. We demonstrate applications of these AMBER receptors in vitro and in vivo by constructing designer cell lines that detect pathological concentrations of FDPs and respond with the production of a reporter and a therapeutic anti-thrombotic protein., Nature Chemical Biology, 18, ISSN:1552-4450, ISSN:1552-4469

Small-molecule responsive protein switches are crucial components to control synthetic cellular activities. However, the repertoire of small-molecule protein switches is insufficient for many applications, including those in the translational spaces, where properties such as safety, immunogenicity, drug half-life, and drug side-effects are critical. Here, we present a computational protein design strategy to repurpose drug-inhibited protein-protein interactions as OFF- and ON-switches. The designed binders and drug-receptors form chemically-disruptable heterodimers (CDH) which dissociate in the presence of small molecules. To design ON-switches, we converted the CDHs into a multi-domain architecture which we refer to as activation by inhibitor release switches (AIR) that incorporate a rationally designed drug-insensitive receptor protein. CDHs and AIRs showed excellent performance as drug responsive switches to control combinations of synthetic circuits in mammalian cells. This approach effectively expands the chemical space and logic responses in living cells and provides a blueprint to develop new ON- and OFF-switches for basic and translational applications.

Synthetic receptors control cell behavior in response to environmental stimuli for applications in basic research and cell therapy. However, the integration of synthetic receptors in unexplored contexts is cumbersome, especially for nonspecialist laboratories. Here, I provide a detailed protocol on how to use receptors of the generalized extracellular molecule sensor (GEMS) platform. GEMS is a modular receptor system that can be adapted to sense molecules of choice by using affinity domains that dimerize in response to the target. GEMS consist of an erythropoietin receptor scaffold that has been mutated to no longer bind to erythropoietin. N-terminal fusions with affinity domains, such as single chain variable fragments (scFvs), that bind to two epitopes on the same target activate the receptor. The intracellular receptor domain can be chosen from several signal transduction domains of single-pass transmembrane receptors to activate endogenous signaling pathways. As of now, GEMS have been used for sensing prostate specific antigen (PSA), the synthetic azo dye RR120, caffeine, nicotine, rapamycin, the SunTag peptide, and a de novo designed protein displaying two viral epitopes. The tested intracellular domains were derived from FGFR1, IL-6RB, and VEGFR2, and were used to drive transgene expression from reporter plasmids responsive to the endogenous transcription factors STAT3, NFAT, NF-κB, and a synthetic transcription factor activated by the MAPK pathway. In this protocol, I focus on transient transfections of HEK293T cells and include several general notes about cell handling. While the described methods are optimized for experiments with GEMS, most of the described techniques are general procedures to set up synthetic biology experiments in mammalian cell culture. I outline how to generate stable cell lines and share tips on how to adapt GEMS for new ligands. The main objective of this protocol is to make the GEMS technology accessible also to nonspecialist laboratories to facilitate the use of synthetic receptors in new research contexts.

De novo protein design has enabled the creation of novel protein structures. To design novel functional proteins, state-of-the-art approaches use natural proteins or first design protein scaffolds that subsequently serve as templates for the transplantation of functional motifs. In these approaches, the templates are function-agnostic and motifs have been limited to those with regular secondary structure. Here, we present a bottom-up approach to build de novo proteins tailored to structurally complex functional motifs. We applied a bottom-up strategy to design scaffolds for four different binding motifs, including one bi-functionalized protein with two motifs. The de novo proteins were functional as biosensors to quantify epitope-specific antibody responses and as orthogonal ligands to activate a signaling pathway in engineered mammalian cells. Altogether, we present a versatile strategy for the bottom-up design of functional proteins, applicable to a wide range of functional protein design challenges.

Strategies for expanding the sensor space of designer receptors are urgently needed to tailor cell-based therapies to respond to any type of medically relevant molecules. Here, we describe a universal approach to designing receptor scaffolds that enables antibody-specific molecular input to activate JAK/STAT, MAPK, PLCG or PI3K/Akt signaling rewired to transgene expression driven by synthetic promoters. To demonstrate its scope, we equipped the GEMS (generalized extracellular molecule sensor) platform with antibody fragments targeting a synthetic azo dye, nicotine, a peptide tag and the PSA (prostate-specific antigen) biomarker, thereby covering inputs ranging from small molecules to proteins. These four GEMS devices provided robust signaling and transgene expression with high signal-to-noise ratios in response to their specific ligands. The sensitivity of the nicotine- and PSA-specific GEMS devices matched the clinically relevant concentration ranges, and PSA-specific GEMS were able to detect pathological PSA levels in the serum of patients diagnosed with prostate cancer.

Tight control over protein degradation is a fundamental requirement for cells to respond rapidly to various stimuli and adapt to a fluctuating environment. Here we develop a versatile, easy-to-handle library of destabilizing tags (degrons) for the precise regulation of protein expression profiles in mammalian cells by modulating target protein half-lives in a predictable manner. Using the well-established tetracycline gene-regulation system as a model, we show that the dynamics of protein expression can be tuned by fusing appropriate degron tags to gene regulators. Next, we apply this degron library to tune a synthetic pulse-generating circuit in mammalian cells. With this toolbox we establish a set of pulse generators with tailored pulse lengths and magnitudes of protein expression. This methodology will prove useful in the functional roles of essential proteins, fine-tuning of gene-expression systems, and enabling a higher complexity in the design of synthetic biological systems in mammalian cells., Nature Communications, 10 (1), ISSN:2041-1723

We designed and engineered a dye production cassette encoding a heterologous pathway, including human tyrosine hydroxylase and Amanita muscaria 4,5-DOPA dioxygenase, for the biosynthesis of the betaxanthin family of plant and fungal pigments in mammalian cells. The system does not impair cell viability, and can be used as a non-protein reporter system to directly visualize the dynamics of gene expression by profiling absorbance or fluorescence in the supernatant of cell cultures, as well as for fluorescence labeling of individual cells. Pigment profiling can also be multiplexed with reporter proteins such as mCherry or the human model glycoprotein SEAP (secreted alkaline phosphatase). Furthermore, absorbance measurement with a smartphone camera using standard application software enables inexpensive, low-tech reporter quantification., Nucleic Acids Research, 48 (12), ISSN:1362-4962, ISSN:0301-5610

Mammalian synthetic biology has evolved to become a key driver of biomedical innovation in the area of cell therapy. Advances in receptor engineering, immunotherapy and cell implants promise new treatment options for complex diseases. Synthetic receptors have already found applications in cellular immunotherapy for cancer treatment, and are being introduced into the field of cell implants. Here, we discuss prospects for the next generation of engineered mammalian cells for human therapy, highlighting selected recent studies.

The ability to engineer custom cell-contact-sensing output devices into human nonimmune cells would be useful for extending the applicability of cell-based cancer therapies and for avoiding risks associated with engineered immune cells. Here we have developed a new class of synthetic T-cell receptor-like signal-transduction device that functions efficiently in human nonimmune cells and triggers release of output molecules specifically upon sensing contact with a target cell. This device employs an interleukin signaling cascade, whose OFF/ON switching is controlled by biophysical segregation of a transmembrane signal-inhibitory protein from the sensor cell-target cell interface. We further show that designer nonimmune cells equipped with this device driving expression of a membrane-penetrator/prodrug-activating enzyme construct could specifically kill target cells in the presence of the prodrug, indicating its potential usefulness for target-cell-specific, cell-based enzyme-prodrug cancer therapy. Our study also contributes to the advancement of synthetic biology by extending available design principles to transmit extracellular information to cells.

Giant unilamellar lipid vesicles (GUVs) are widely used as model membrane systems and provide an excellent basis to construct artificial cells. To construct more sophisticated artificial cells, proteins-in particular membrane proteins-need to be incorporated in GUVs. However, current methods for protein reconstitution have limited throughput or are not generally applicable for all proteins because they depend on detergent solubilization. This limitation is addressed here by introducing calcium-mediated membrane fusion to transfer proteins between negatively charged GUVs and cell-derived plasma membrane vesicles (CDVs), derived from HEK293T cells overexpressing a membrane receptor protein. Fusion conditions are optimized using large unilamellar vesicles and GUVs containing phosphatidylserines and fusogenic lipids. The approach is then applied to induce lipid mixing and subsequent transfer of the overexpressed membrane receptor from CDVs into GUVs. The membrane receptor is detected by immunofluorescence on GUVs that underwent lipid mixing with CDVs. Those GUVs also exhibit esterase activity because cytosolic esterases entrapped in the CDVs are transferred during membrane fusion. Thus, content mixing is demonstrated. Using CDVs circumvents the need to purify or solubilize proteins. Moreover, calcium-mediated fusion allows transfer of lipids, water-soluble and membrane bound proteins in one step, resulting in a semi-synthetic cell., Advanced Biosystems, 4 (11), ISSN:2366-7478