Search

Abstract Background Naturally occurring nanoparticles isolated from English ivy (Hedera helix) have previously been proposed as an alternative to metallic nanoparticles as sunscreen fillers due to their effective UV extinction property, low toxicity and potential biodegradability. Methods This study focused on analyzing the physicochemical properties of the ivy nanoparticles, specifically, those parameters which are crucial for use as sunscreen fillers, such as pH, temperature, and UV irradiation. The visual transparency and cytotoxicity of ivy nanoparticles were also investigated comparing them with other metal oxide nanoparticles. Results Results from this study demonstrated that, after treatment at 100°C, there was a clear increase in the UV extinction spectra of the ivy nanoparticles caused by the partial decomposition. In addition, the UVA extinction spectra of the ivy nanoparticles gradually reduced slightly with the decrease of pH values in solvents. Prolonged UV irradiation indicated that the influence of UV light on the stability of the ivy nanoparticle was limited and time-independent. Compared to TiO2 and ZnO nanoparticles, ivy nanoparticles showed better visual transparency. Methylthiazol tetrazolium assay demonstrated that ivy nanoparticles exhibited lower cytotoxicity than the other two types of nanoparticles. Results also suggested that protein played an important role in modulating the three-dimensional structure of the ivy nanoparticles. Conclusions Based on the results from this study it can be concluded that the ivy nanoparticles are able to maintain their UV protective capability at wide range of temperature and pH values, further demonstrating their potential as an alternative to replace currently available metal oxide nanoparticles in sunscreen applications.

Abstract Background English ivy (Hedera helix) is well known for its adhesive properties and climbing ability. Essential to its ability to adhere to vertical surfaces is the secretion of a nanocomposite adhesive containing spherical nanoparticles, 60–85 nm in diameter, produced exclusively by root hairs present on adventitious roots. These organic nanoparticles have shown promise in biomedical and cosmetic applications, and represent a safer alternative to metal oxide nanoparticles currently available. Results It was discovered that the maximum adventitious root production was achieved by a 4 h application of 1 mg/ml indole-3 butyric acid (IBA) to juvenile English ivy shoot segments cultured in custom vessels. After incubation of the shoots under continuous light at 83 μmol/m2 s at 20°C for 2 weeks, the adventitious roots were harvested from the culture system and it was possible to isolate 90 mg of dry weight nanoparticles per 12 g of roots. The nanoparticle morphology was characterized by atomic force microscopy, and found to be similar to previous studies. Conclusions An enhanced system for the production of English ivy adventitious roots and their nanoparticles by modifying GA7 Magenta boxes and identifying the optimal concentration of IBA for adventitious root growth was developed. This system is the first such platform for growing and harvesting organic nanoparticles from plants, and represents an important step in the development of plant-based nanomanufacturing. It is a significant improvement on the exploitation of plant systems for the formation of metallic nanoparticles, and represents a pathway for the generation of bulk ivy nanoparticles for translation into biomedical applications.

Abstract Background The search for naturally occurring nanocomposites with diverse properties for tissue engineering has been a major interest for biomaterial research. In this study, we investigated a nanofiber and nanoparticle based nanocomposite secreted from an insect-capturing plant, the Sundew, for cell attachment. The adhesive nanocomposite has demonstrated high biocompatibility and is ready to be used with minimal preparation. Results Atomic force microscopy (AFM) conducted on the adhesive from three species of Sundew found that a network of nanofibers and nanoparticles with various sizes existed independent of the coated surface. AFM and light microscopy confirmed that the pattern of nanofibers corresponded to Alcian Blue staining for polysaccharide. Transmission electron microscopy identified a low abundance of nanoparticles in different pattern form AFM observations. In addition, energy-dispersive X-ray spectroscopy revealed the presence of Ca, Mg, and Cl, common components of biological salts. Study of the material properties of the adhesive yielded high viscoelasticity from the liquid adhesive, with reduced elasticity observed in the dried adhesive. The ability of PC12 neuron-like cells to attach and grow on the network of nanofibers created from the dried adhesive demonstrated the potential of this network to be used in tissue engineering, and other biomedical applications. Conclusions This discovery demonstrates how a naturally occurring nanofiber and nanoparticle based nanocomposite from the adhesive of Sundew can be used for tissue engineering, and opens the possibility for further examination of natural plant adhesives for biomedical applications.

Abstract Background Over the last decade safety concerns have arisen about the use of metal-based nanoparticles in the cosmetics field. Metal-based nanoparticles have been linked to both environmental and animal toxicity in a variety of studies. Perhaps the greatest concern involves the large amounts of TiO2 nanoparticles that are used in commercial sunscreens. As an alternative to using these potentially hazardous metal-based nanoparticles, we have isolated organic nanoparticles from English ivy (Hedera helix). In this study, ivy nanoparticles were evaluated for their potential use in sunscreens based on four criteria: 1) ability to absorb and scatter ultraviolet light, 2) toxicity to mammalian cells, 3) biodegradability, and 4) potential for diffusion through skin. Results Purified ivy nanoparticles were first tested for their UV protective effects using a standard spectrophotometric assay. Next the cell toxicity of the ivy nanoparticles was compared to TiO2 nanoparticles using HeLa cells. The biodegradability of these nanoparticles was also determined through several digestion techniques. Finally, a mathematical model was developed to determine the potential for ivy nanoparticles to penetrate through human skin. The results indicated that the ivy nanoparticles were more efficient in blocking UV light, less toxic to mammalian cells, easily biodegradable, and had a limited potential to penetrate through human skin. When compared to TiO2 nanoparticles, the ivy nanoparticles showed decreased cell toxicity, and were easily degradable, indicating that they provided a safer alternative to these nanoparticles. Conclusions With the data collected from this study, we have demonstrated the great potential of ivy nanoparticles as a sunscreen protective agent, and their increased safety over commonly used metal oxide nanoparticles.

Although plants are sessile, their ubiquitous distribution, ability to harness energy from the sun, and ability to sense above and belowground signals make them ideal candidates for biosensor development. Synthetic biology has allowed scientists to reimagine biosensors as engineered devices that are focused on accomplishing novel tasks. As such, a new wave of plant-based sensors, phytosensors, are being engineered as multi-component sense-and-report devices that can alert human operators to a variety of hazards. While phytosensors are intrinsically tied to agriculture, a new generation of phytosensors has been envisioned to function in the built environment and even in austere environments, such as space. In this review, we will explore the current state of the art with regard to phytosensor engineering., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Casein forms diverse structures with functionalities tunable by complexation with surfactants, and shellac is an emerging surfactant. In the present work, molecular and mesoscopic structures of shellac and micellar casein and the underlying interactions after treatment with a pH-cycle were investigated. Dispersions with 0.5 % w/v shellac and various shellac:casein mass ratios were prepared at pH 12.0 to dissolve shellac and dissociate casein micelles, followed by neutralization to pH 7.0 to form complexes. Both covalent and non-covalent (hydrogen bonding, electrostatic, and hydrophobic) interactions contributed to the complex formation. The formed complexes had an average diameter of ~80 nm. The complexation of shellac and casein prevented the precipitation of protonated shellac during neutralization, and dispersions with casein:shellac mass ratios of 2:1 and above were absent of precipitates at pH 7.0. The formed nanocomplexes may have applications for preparing novel colloidal systems and loading lipophilic bioactive compounds., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Ozone is a potent disinfecting agent used to treat potable water and wastewater, effectively clearing protozoa such as Giardia and Cryptosporidium spp. It is unclear whether ozone treatment of water or fresh produce can reduce the spread of the emerging parasite Cyclospora cayetanensis, which causes cyclosporiasis in humans. Obtaining viable C. cayetanensis oocysts to evaluate inactivation methods is challenging because we lack the means to propagate them in vitro, because of delays in case reporting, and because health departments typically add inactivating fixatives to clinical specimens. Research in various surrogate organisms has sought to bolster understanding of the biology of C. cayetanensis. Among these surrogates is the poultry parasite Eimeria acervulina, a closely related and easily cultured parasite of economic significance. We used this surrogate to evaluate the consequences of ozone treatment, using the sporulation state as an indicator of infectious potential. Treating with ozonated water acidified with citric acid reduced sporulation ability in a dose-dependent manner; treatment with up to 4.93 mg/L initial concentration of ozone resulted in a 93% inactivation of sporulation by 7 days posttreatment. This developmental arrest was accompanied by transcriptional changes in genes involved in regulating the response to reactive oxygen species (ROS) in a time course that is consistent with the production of oxygen free radicals. This study shows that ozone is highly effective in preventing sporulation of E. acervulina, a model coccidian used as a surrogate for Cyclospora. Furthermore, ozone exposure induced molecular responses to general oxidative stress, documented with several well-characterized antioxidant enzymes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Plants and microbes communicate to collaborate to stop pests, scavenge nutrients, and react to environmental change. Microbiota consisting of thousands of species interact with each other and plants using a large chemical language that is interpreted by complex regulatory networks. In this work, we develop modular interkingdom communication channels, enabling bacteria to convey environmental stimuli to plants. We introduce a "sender device" in Pseudomonas putida and Klebsiella pneumoniae, that produces the small molecule p-coumaroyl-homoserine lactone (pC-HSL) when the output of a sensor or circuit turns on. This molecule triggers a "receiver device" in the plant to activate gene expression. We validate this system in Arabidopsis thaliana and Solanum tuberosum (potato) grown hydroponically and in soil, demonstrating its modularity by swapping bacteria that process different stimuli, including IPTG, aTc and arsenic. Programmable communication channels between bacteria and plants will enable microbial sentinels to transmit information to crops and provide the building blocks for designing artificial consortia., (© 2024. The Author(s).)

Plant metabolic engineering must take into consideration the heterogeneous cell types that play a role in metabolite production; cells do not participate equally. We posit that artificial intelligence (AI) developed for biomedical purposes can be applied to plant cell characterization to accelerate the development of metabolic engineering strategies in plants., Competing Interests: Declaration of interests No interests are declared., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Key Message: A novel plant binary expression system was developed from the compactin biosynthetic pathway 27 of Penicillium citrinum ML-236B. The system achieved >fivefold activation of gene expression in 28 transgenic tobacco. A diverse and well-characterized genetic toolset is fundamental to achieve the overall goals of plant synthetic biology. To properly coordinate expression of a multigene pathway, this toolset should include binary systems that control gene expression at the level of transcription. In plants, few highly functional, orthogonal transcriptional regulators have been identified. Here, we describe the process of developing synthetic plant transcription factors using regulatory elements from the Penicillium citrinum ML-236B (compactin) pathway. This pathway contains several genes including mlcA and mlcC that are transcriptionally regulated in a dose-dependent manner by the activator mlcR. In Nicotiana benthamiana, we first expressed mlcR with several cognate synthetic promoters driving expression of GFP. Synthetic promoters contained operator sequences from the compactin gene cluster. Following identification of the most active synthetic promoter, the DNA-binding domain from mlcR was used to generate chimeric transcription factors containing variable activation domains, including QF from the Neurospora crassa Q-system. Activity was measured at both protein and RNA levels which correlated with an R 2 value of 0.94. A synthetic transcription factor with a QF activation domain increased gene expression from its synthetic promoter up to sixfold in N. benthamiana. Two systems were characterized in transgenic tobacco plants. The QF-based plants maintained high expression in tobacco, increasing expression from the cognate synthetic promoter by fivefold. Transgenic plants and non-transgenic plants were morphologically indistinguishable. The framework of this study can easily be adopted for other putative transcription factors to continue improvement of the plant synthetic biology toolbox., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Climate-smart and sustainable crops are needed for the future. Engineering crops for tolerance of both abiotic and biotic stress is one approach. The accumulation of trehalose, controlled through trehalose-6-phosphate synthase ( TPS ) or OtsA and trehalose-6-phosphate phosphatase ( TPP ) or OtsB genes in microbes, is known to provide protection for many microbial and fungal species against abiotic stress. The effect of trehalose accumulation in plant species is less understood. Here, we studied the heterologous expression of Escherichia coli OtsB in potato ( Solanum tuberosum var. 'Desiree') with regards to stress tolerance. The performance of transgenic lines was assessed in both growth chambers and greenhouse mesocosms. Overexpressing potato OtsB lines significantly increased resilience to heat, photoperiod, herbivory, and competition when compared with wildtype plants. Most strikingly, when subjected to high temperatures, transgenic lines exhibited a significantly lower reduction in tuber yield ranging from 40% to 77%, while wildtype plants experienced a 95% decrease in tuber yield. When exposed to competitors in a selected StSP3D::OtsB line, tuber yield was 1.6 times higher than wildtype. Furthermore, transgenic lines performed significantly better under low-nutrient regimes: under competition, yield increased by 1.5-fold. Together, these results demonstrate that increased trehalose has the potential to create more resistant and stable crop plants.

Nuclear energy, already a practical solution for supplying energy on a scale similar to fossil fuels, will likely increase its footprint over the next several decades to meet current climate goals. Gamma radiation is produced during fission in existing nuclear reactors and thus the need to detect leakage from nuclear plants, and effects of such leakage on ecosystems will likely also increase. At present, gamma radiation is detected using mechanical sensors that have several drawbacks, including: (i) limited availability; (ii) reliance on power supply; and (iii) requirement of human presence in dangerous areas. To overcome these limitations, we have developed a plant biosensor (phytosensor) to detect low-dose ionizing radiation. The system utilizes synthetic biology to engineer a dosimetric switch into potato utilizing the plant's native DNA damage response (DDR) machinery to produce a fluorescent output. In this work, the radiation phytosensor was shown to respond to a wide range of gamma radiation exposure (10-80 Grey) producing a reporter signal that was detectable at >3 m. Further, a pressure test of the top radiation phytosensor in a complex mesocosm demonstrated full function of the system in a 'real world' scenario., (© 2023 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.)

Key Message: Novel episomal systems have the potential to accelerate plastid genetic engineering for application in plant synthetic biology. Plastids represent valuable subcellular compartments for genetic engineering of plants with intrinsic advantages to engineering the nucleus. The ability to perform site-specific transgene integration by homologous recombination (HR), coordination of transgene expression in operons, and high production of heterologous proteins, all make plastids an attractive target for synthetic biology. Typically, plastid engineering is performed by homologous recombination; however, episomal-replicating vectors have the potential to accelerate the design/build/test cycles for plastid engineering. By accelerating the timeline from design to validation, it will be possible to generate translational breakthroughs in fields ranging from agriculture to biopharmaceuticals. Episomal-based plastid engineering will allow precise single step metabolic engineering in plants enabling the installation of complex synthetic circuits with the ambitious goal of reaching similar efficiency and flexibility of to the state-of-the-art genetic engineering of prokaryotic systems. The prospect to design novel episomal systems for production of transplastomic marker-free plants will also improve biosafety for eventual release in agriculture., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Mammalian decomposition provides pulses of organic matter to the local ecosystem creating ephemeral hotspots of nutrient cycling. While changes to soil biogeochemistry in these hotspots have been described for C and N, patterns associated with deposition and cycling of other elements have not received the same attention. The goal of our study was to evaluate temporal changes to a broad suite of dissolved elements in soils impacted by human decomposition on the soil surface including: 1) abundant mineral elements in the human body (K, Na, S, P, Ca, and Mg), 2) trace elements in the human body (Fe, Mn, Se, Zn, Cu, Co, and B), and 3) Al which is transient in the human body but common in soils. We performed a four-month human decomposition trial at the University of Tennessee Anthropology Research Facility and quantified elemental concentrations dissolved in the soil solution, targeting the mobile and bioavailable fraction. We identified three groups of elements based on their temporal patterns. Group 1 elements appeared to be cadaver-derived (Na, K, P, S) and their persistence in soil varied based upon soluble organic forms (P), the dynamics of the soil exchange complex (Na, K), and gradual releases attributable to microbial degradation (S). Group 2 elements (Ca, Mg, Mn, Se, B) included three elements that have greater concentrations in soil than would be expected based on cadaver inputs alone, suggesting that these elements partially originate from the soil exchange (Ca, Mg), or are solubilized as a result of soil acidification (Mn). Group 3 elements (Fe, Cu, Zn, Co, Al) increased late in the decomposition process, suggesting a gradual solubilization from soil minerals under acidic pH conditions. This work presents a detailed longitudinal characterization of changes in dissolved soil elements during human decomposition furthering our understanding of elemental deposition and cycling in these environments., Competing Interests: The authors have declared no competing interests exist., (Copyright: © 2023 Taylor et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Genome-editing has enabled rapid improvement for staple food crops, such as potato, a key beneficiary of the technology. In potato, starch contained within tubers represents the primary product for use in food and non-food industries. Starch granules are produced in the plastids of tubers with plastid size correlated with the size of starch grana. The division of plastids is controlled by proteins, including the tubulin-like GTPase FtsZ1. The altered expression of FtsZ1 has been shown to disrupt plastid division, leading to the production of "macro-plastid"-containing plants. These macro-chloroplast plants are characterized by cells containing fewer and enlarged plastids. In this work, we utilize CRISPR/Cas9 to generate FtsZ1 edited potato lines to demonstrate that genome-editing can be used to increase the size of starch granules in tubers. Altered plastid morphology was comparable to the overexpression of FtsZ1 in previous work in potato and other crops. Several lines were generated with up to a 1.98-fold increase in starch granule size that was otherwise phenotypically indistinguishable from wild-type plants. Further, starch paste from one of the most promising lines showed a 2.07-fold increase in final viscosity. The advantages of enlarged starch granules and the potential of CRISPR/Cas9-based technologies for food crop improvement are further discussed.

In the rapidly expanding field of synthetic biology, chloroplasts represent attractive targets for installation of valuable genetic circuits in plant cells. Conventional methods for engineering the chloroplast genome (plastome) have relied on homologous recombination (HR) vectors for site-specific transgene integration for over 30 years. Recently, episomal-replicating vectors have emerged as valuable alternative tools for genetic engineering of chloroplasts. With regard to this technology, in this chapter we describe a method for engineering potato (Solanum tuberosum) chloroplasts to generate transgenic plants using the small synthetic plastome (mini-synplastome). In this method, the mini-synplastome is designed for Golden Gate cloning for easy assembly of chloroplast transgene operons. Mini-synplastomes have the potential to accelerate plant synthetic biology by enabling complex metabolic engineering in plants with similar flexibility of engineered microorganisms., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Delivery systems smaller than 50 nm are advantageous for cancer prevention. In this study, curcumin was dissolved in shellac micelles following co-dissolving at pH 13.0 and neutralization using glucono-delta-lactone. With 5% w/v shellac and 0.5-5 mg/mL curcumin, the loading capacity and encapsulation efficiency were up to 8.0 and 92.6%, respectively, and the nanocapsules had an average diameter of 20 nm. Differential scanning calorimetry, FTIR spectroscopy, and fluorescence spectroscopy results confirmed the encapsulation of curcumin in an amorphous state in shellac micelles. The neutral nanocapsule dispersions maintained the particle dimension and had less than 10% curcumin degradation during 4 week storage at 4 °C. Nanoencapsulating curcumin enhanced in vitro bioavailability and antiproliferation activity against colon cancer cells. After simulated digestions, ∼60% of the nanoencapsulated curcumin was not available for intestinal absorption, nanocapsules retained their structure, and nanoencapsulated curcumin remained active against colon cancer cells, indicating the potential delivery for colorectal cancer prevention.

Globally, heavy metal (HM) contamination is one of the primary causes of environmental pollution leading to decreased quality of life for those affected. In particular, HM contamination in groundwater poses a serious risk to human health and the potential for destabilization of aquatic ecosystems. At present, strategies to remove HM contamination from wastewater are inefficient, costly, laborious, and often the removal poses as much risk to the environment as the initial contamination. Phytoremediation, plant-based removal of contaminants from soil or water, has long been viewed as an economical and sustainable solution to remove toxic metals from the environment. However, to date, phytoremediation has demonstrated limited successes despite a large volume of literature supporting its potential. A key aspect for achieving robust and meaningful phytoremediation is the selection of a plant species that is well suited to the task. For the removal of pollutants from wastewater, hydrophytes, like duckweed, exhibit significant potential due to their rapid growth on nutrient-rich water, ease of collection, and ability to survive in various ecosystems. As a model for ecotoxicity studies, duckweed is an ideal candidate, as it is easy to cultivate under controlled and even sterile conditions, and the rapid growth enables multi-generational studies. Similarly, recent advances in the genetic engineering and genome-editing of duckweed will enable the transition from fundamental ecotoxicity studies to engineered solutions for phytoremediation of HMs. This review will provide insight into the suitability of duckweeds for phytoremediation of HMs and strategies for engineering next-generation duckweed to provide real-world environmental solutions., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

While the installation of complex genetic circuits in microorganisms is relatively routine, the synthetic biology toolbox is severely limited in plants. Of particular concern is the absence of combinatorial analysis of regulatory elements, the long design-build-test cycles associated with transgenic plant analysis, and a lack of naming standardization for cloning parts. Here, we use previously described plant regulatory elements to design, build, and test 91 transgene cassettes for relative expression strength. Constructs were transiently transfected into Nicotiana benthamiana leaves and expression of a fluorescent reporter was measured from plant canopies, leaves, and protoplasts isolated from transfected plants. As anticipated, a dynamic level of expression was achieved from the library, ranging from near undetectable for the weakest cassette to a ∼200-fold increase for the strongest. Analysis of expression levels in plant canopies, individual leaves, and protoplasts were correlated, indicating that any of the methods could be used to evaluate regulatory elements in plants. Through this effort, a well-curated 37-member part library of plant regulatory elements was characterized, providing the necessary data to standardize construct design for precision metabolic engineering in plants.

Phytosensors are genetically engineered plant-based sensors that feature synthetic promoters fused to reporter genes to sense and report the presence of specific biotic and abiotic stressors on plants. However, when induced reporter gene output is below detectable limits, owing to relatively weak promoters, the phytosensor may not function as intended. Here, we show modifications to the system to amplify reporter gene signal by using a synthetic transcription factor gene driven by a plant pathogen-inducible synthetic promoter. The output signal was unambiguous green fluorescence when plants were infected by pathogenic bacteria. We produced and characterized a phytosensor with improved sensing to specific bacterial pathogens with targeted detection using spectral wavelengths specific to a fluorescence reporter at 3 m standoff detection. Previous attempts to create phytosensors revealed limitations in using innate plant promoters with low-inducible activity since they are not sufficient to produce a strong detectable fluorescence signal for standoff detection. To address this, we designed a pathogen-specific phytosensor using a synthetic promoter-transcription factor system: the S-Box cis -regulatory element which has low-inducible activity as a synthetic 4xS-Box promoter, and the Q-system transcription factor as an amplifier of reporter gene expression. This promoter-transcription factor system resulted in 6-fold amplification of the fluorescence after infection with a potato pathogen, which was detectable as early as 24 h post-bacterial infection. This novel bacterial pathogen-specific phytosensor potato plant demonstrates that the Q-system may be leveraged as a powerful orthogonal tool to amplify a relatively weak synthetic inducible promoter, enabling standoff detection of a previously undetectable fluorescence signal. Pathogen-specific phytosensors would be an important asset for real-time early detection of plant pathogens prior to the display of disease symptoms on crop plants., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Persad-Russell, Mazarei, Schimel, Howe, Schmid, Kakeshpour, Barnes, Brabazon, Seaberry, Reuter, Lenaghan and Stewart.)

In the age of synthetic biology, plastid engineering requires a nimble platform to introduce novel synthetic circuits in plants. While effective for integrating relatively small constructs into the plastome, plastid engineering via homologous recombination of transgenes is over 30 years old. Here we show the design-build-test of a novel synthetic genome structure that does not disturb the native plastome: the 'mini-synplastome'. The mini-synplastome was inspired by dinoflagellate plastome organization, which is comprised of numerous minicircles residing in the plastid instead of a single organellar genome molecule. The first mini-synplastome in plants was developed in vitro to meet the following criteria: (i) episomal replication in plastids; (ii) facile cloning; (iii) predictable transgene expression in plastids; (iv) non-integration of vector sequences into the endogenous plastome; and (v) autonomous persistence in the plant over generations in the absence of exogenous selection pressure. Mini-synplastomes are anticipated to revolutionize chloroplast biotechnology, enable facile marker-free plastid engineering, and provide an unparalleled platform for one-step metabolic engineering in plants., (© 2021 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.)

With the advent of plant synthetic biology, there is an urgent need to develop plant-based systems that are able to effectively enhance the speed of design-build-test cycles to screen large numbers of synthetic constructs. Thus far, protoplasts have served to fill this need, with cell suspension cultures serving as the primary source tissue to enable high-throughput protoplast experimentation. The possibility to use low-cost food-grade enzymes for cell wall digestion along with polyethylene glycol (PEG)-mediated transfection makes protoplasts particularly suited to automation and high-throughput screening. In other systems for which synthetic biology is well established (model bacteria and yeast), libraries of components, i.e., promoters, 5' untranslated regions, 3' untranslated regions, terminators, and transcription factors, serve as the basis for the design of complex genetic circuits. In order for synthetic biology to make similar strides in plant biology, well-characterized libraries of functional genetic parts for plants are required, necessitating the need for high-throughput protoplast assays.In this chapter, we describe an optimized method for the preparation of soybean (Glycine max ) dark-grown cell suspension cultures, followed by protoplast isolation, automated transfection , and subsequent screening., (© 2022. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Abiotic stress resistance traits may be especially crucial for sustainable production of bioenergy tree crops. Here, we show the performance of a set of rationally designed osmotic-related and salt stress-inducible synthetic promoters for use in hybrid poplar. De novo motif-detecting algorithms yielded 30 water-deficit (SD) and 34 salt stress (SS) candidate DNA motifs from relevant poplar transcriptomes. We selected three conserved water-deficit stress motifs (SD18, SD13 and SD9) found in 16 co-expressed gene promoters, and we discovered a well-conserved motif for salt response (SS16). We characterized several native poplar stress-inducible promoters to enable comparisons with our synthetic promoters. Fifteen synthetic promoters were designed using various SD and SS subdomains, in which heptameric repeats of five-to-eight subdomain bases were fused to a common core promoter downstream, which, in turn, drove a green fluorescent protein (GFP) gene for reporter assays. These 15 synthetic promoters were screened by transient expression assays in poplar leaf mesophyll protoplasts and agroinfiltrated Nicotiana benthamiana leaves under osmotic stress conditions. Twelve synthetic promoters were induced in transient expression assays with a GFP readout. Of these, five promoters (SD18-1, SD9-2, SS16-1, SS16-2 and SS16-3) endowed higher inducibility under osmotic stress conditions than native promoters. These five synthetic promoters were stably transformed into Arabidopsis thaliana to study inducibility in whole plants. Herein, SD18-1 and SD9-2 were induced by water-deficit stress, whereas SS16-1, SS16-2 and SS16-3 were induced by salt stress. The synthetic biology design pipeline resulted in five synthetic promoters that outperformed endogenous promoters in transgenic plants., (© 2021 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.)

Reverse genetics approaches have revolutionized plant biology and agriculture. Phenomics has the prospect of bridging plant phenotypes with genes, including transgenes, to transform agricultural fields. Genetically encoded fluorescent proteins (FPs) have revolutionized plant biology paradigms in gene expression, protein trafficking and plant physiology. While the first instance of plant canopy imaging of green fluorescent protein (GFP) was performed over 25 years ago, modern phenomics has largely ignored fluorescence as a transgene expression device despite the burgeoning FP colour palette available to plant biologists. Here, we show a new platform for stand-off imaging of plant canopies expressing a wide variety of FP genes. The platform-the fluorescence-inducing laser projector (FILP)-uses an ultra-low-noise camera to image a scene illuminated by compact diode lasers of various colours, coupled with emission filters to resolve individual FPs, to phenotype transgenic plants expressing FP genes. Each of the 20 FPs screened in plants were imaged at >3 m using FILP in a laboratory-based laser range. We also show that pairs of co-expressed fluorescence proteins can be imaged in canopies. The FILP system enabled a rapid synthetic promoter screen: starting from 2000 synthetic promoters transfected into protoplasts to FILP-imaged agroinfiltrated Nicotiana benthamiana plants in a matter of weeks, which was useful to characterize a water stress-inducible synthetic promoter. FILP canopy imaging was also accomplished for stably transformed GFP potato and in a split-GFP assay, which illustrates the flexibility of the instrument for analysing fluorescence signals in plant canopies., (© 2020 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.)

Chloroplast biotechnology is a route for novel crop metabolic engineering. The potential bio-confinement of transgenes, the high protein expression and the possibility to organize genes into operons represent considerable advantages that make chloroplasts valuable targets in agricultural biotechnology. In the last 3 decades, chloroplast genomes from a few economically important crops have been successfully transformed. The main bottlenecks that prevent efficient transformation in a greater number of crops include the dearth of proven selectable marker gene-selection combinations and tissue culture methods for efficient regeneration of transplastomic plants. The prospects of increasing organelle size are attractive from several perspectives, including an increase in the surface area of potential targets. As a proof-of-concept, we generated Solanum tuberosum (potato) macro-chloroplast lines overexpressing the tubulin-like GTPase protein gene FtsZ1 from Arabidopsis thaliana. Macro-chloroplast lines exhibited delayed growth at anthesis; however, at the time of harvest there was no significant difference in height between macro-chloroplast and wild-type lines. Macro-chloroplasts were successfully transformed by biolistic DNA-delivery and efficiently regenerated into homoplasmic transplastomic lines. We also demonstrated that macro-chloroplasts accumulate the same amount of heterologous protein than wild-type organelles, confirming efficient usage in plastid engineering. Advantages and limitations of using enlarge compartments in chloroplast biotechnology are discussed.

Until recently, robust autoluminescence in plants has proven elusive. Two recent pioneering manuscripts (Khakhar et al. and Mitiouchkina et al.) expand our understanding of fungal bioluminescence to provide a new blueprint for engineering autoluminescence in plants. Here we discuss translating a fungal bioluminescence pathway into plants, along with potential future applications., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

In the USA, 100 000 people go missing every year. Difficulty in the rapid identification of sites of human decomposition complicates the recovery of bodies, especially in forests. We propose that spectral responses in tree and shrub canopies could act as guides to find cadavers using remote sensing platforms for societal benefit., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The wide-scale production of renewable fuels from lignocellulosic feedstocks continues to be hampered by the natural recalcitrance of biomass. Therefore, there is a need to develop robust and reliable methods to characterize and quantify components that contribute to this recalcitrance. In this study, we utilized a method that incorporates pyrolysis with successive gas chromatography and mass spectrometry (Py-GC/MS) to assess lignification in cell suspension cultures. This method was compared with other standard techniques such as acid-catalyzed hydrolysis, acetyl bromide lignin determination, and nitrobenzene oxidation for quantification of cell wall bound phenolic compounds. We found that Py-GC/MS can be conducted with about 250 µg of tissue sample and provides biologically relevant data, which constitutes a substantial advantage when compared to the 50-300 mg of tissue needed for the other methods. We show that when combined with multivariate statistical analyses, Py-GC/MS can distinguish cell wall components of switchgrass ( Panicum virgatum ) suspension cultures before and after inducing lignification. The deposition of lignin precursors on uninduced cell walls included predominantly guaiacyl-based units, 71% ferulic acid, and 5.3% p-coumaric acid. Formation of the primary and partial secondary cell wall was supported by the respective ~15× and ~1.7× increases in syringyl-based and guaiacyl-based precursors, respectively, in the induced cells. Ferulic acid was decreased by half after induction. These results provide the proof-of-concept for quick and reliable cell wall compositional analyses using Py-GC/MS and could be targeted for either translational genomics or for fundamental studies focused on understanding the molecular and physiological mechanisms regulating plant cell wall production and biomass recalcitrance., (Copyright © 2020 Kline, Voothuluru, Lenaghan, Burris, Soliman, Tetard, Stewart, Rials and Labbé.)

A primary focus of the rapidly growing field of plant synthetic biology is to develop technologies to precisely regulate gene expression and engineer complex genetic circuits into plant chassis. At present, there are few orthogonal tools available for effectively controlling gene expression in plants, with most researchers instead using a limited set of viral elements or truncated native promoters. A powerful repressible-and engineerable-binary system that has been repurposed in a variety of eukaryotic systems is the Q-system from Neurospora crassa . Here, we demonstrate the functionality of the Q-system in plants through transient expression in soybean ( Glycine max ) protoplasts and agroinfiltration in Nicotiana benthamiana leaves. Further, using functional variants of the QF transcriptional activator, it was possible to modulate the expression of reporter genes and to fully suppress the system through expression of the QS repressor. As a potential application for plant-based biosensors (phytosensors), we demonstrated the ability of the Q-system to amplify the signal from a weak promoter, enabling remote detection of a fluorescent reporter that was previously undetectable. In addition, we demonstrated that it was possible to coordinate the expression of multiple genes through the expression of a single QF activator. Based on the results from this study, the Q-system represents a powerful orthogonal tool for precise control of gene expression in plants, with envisioned applications in metabolic engineering, phytosensors, and biotic and abiotic stress tolerance., (Copyright © 2020 Persad, Reuter, Dice, Nguyen, Rigoulot, Layton, Schmid, Poindexter, Occhialini, Stewart and Lenaghan.)

CRISPR/Cas9 has been widely applied to various plant species accelerating the pace of plant genome editing and precision breeding in crops. Unintended effects beyond off-target nucleotide mutations are still somewhat unexplored. We investigated the degree and patterns of epigenetic changes after gene editing. We examined changes in DNA methylation in genome-edited promoters of naturally hypermethylated genes (AT1G72350 and AT1G09970) and hypomethylated genes (AT3G17320 and AT5G28770) from Arabidopsis . Transgenic plants were developed via Agrobacterium -mediated floral dip transformation. Homozygous edited lines were selected from segregated T 2 plants by an in vitro digestion assay using ribonucleoprotein complex. Bisulfite sequencing comparisons were made between paired groups of edited and non-edited plants to identify changes in DNA methylation of the targeted loci. We found that directed mutagenesis via CRISPR/Cas9 resulted in no unintended morphological or epigenetic alterations. Phenotypes of wild-type, transgenic empty vector, and transgenic edited plants were similar. Epigenetic profiles revealed that methylation patterns of promoter regions flanking target sequences were identical among wild-type, transgenic empty vector, and transgenic edited plants. There was no effect of mutation type on epigenetic status. We also evaluated off-target mutagenesis effects in the edited plants. Potential off-target sites containing up to 4-bp mismatch of each target were sequenced. No off-target mutations were detected in candidate sites. Our results showed that CRISPR/Cas9 did not leave an epigenetic footprint on either the immediate gene-edited DNA and flanking DNA or introduce off-target mutations., (Copyright © 2020 Lee, Mazarei, Pfotenhauer, Dorrough, Poindexter, Hewezi, Lenaghan, Graham and Stewart.)

Background: Switchgrass ( Panicum virgatum L.), a North American prairie grassland species, is a potential lignocellulosic biofuel feedstock owing to its wide adaptability and biomass production. Production and genetic manipulation of switchgrass should be useful to improve its biomass composition and production for bioenergy applications. The goal of this project was to develop a high-throughput stable switchgrass transformation method using Agrobacterium tumefaciens with subsequent plant regeneration., Results: Regenerable embryogenic cell suspension cultures were established from friable type II callus-derived inflorescences using two genotypes selected from the synthetic switchgrass variety 'Performer' tissue culture lines 32 and 605. The cell suspension cultures were composed of a heterogeneous fine mixture culture of single cells and aggregates. Agrobacterium tumefaciens strain GV3101 was optimum to transfer into cells the pANIC-10A vector with a hygromycin-selectable marker gene and a pporRFP orange fluorescent protein marker gene at an 85% transformation efficiency. Liquid cultures gave rise to embryogenic callus and then shoots, of which up to 94% formed roots. The resulting transgenic plants were phenotypically indistinguishable from the non-transgenic parent lines., Conclusion: The new cell suspension-based protocol enables high-throughput Agrobacterium -mediated transformation and regeneration of switchgrass in which plants are recovered within 6-7 months from culture establishment., Competing Interests: Competing interestsPatent pending (US2017013236A1) covering the Perf605 line and transformation method was submitted on June 2nd, 2014., (© The Author(s) 2019.)

Key Message: A novel soybean cell culture was developed, establishing a reliable and rapid promoter assay to enable high-throughput automated screening in soybean protoplasts relevant to shoot tissues in whole plants. Transient reporter gene assays can be valuable to rapidly estimate expression characteristics of heterologous promoters. The challenge for maximizing the value of such screens is to combine relevant cells or tissues with methods that can be scaled for high-throughput screening, especially for crop-rather than model species. We developed a robust and novel soybean cell suspension culture derived from leaf-derived callus for protoplast production: a platform for promoter screening. The protoplasts were transfected with promoter-reporter constructs, of which were chosen and validated against known promoter expression profiles from tissue-derived protoplasts (leaves, stems, and immature cotyledons) and gene expression data from plants. The cell culture reliably produced 2.82 ± 0.94 × 10 8 protoplasts/g fresh culture mass with a transfection efficiency of 31.06 ± 7.69% at 48 h post-incubation. The promoter-reporter gene DNA expression levels of transfected cell culture-derived protoplasts were most similar to that of leaf- and stem-derived protoplasts (correlation coefficient of 0.99 and 0.96, respectively) harboring the same constructs. Cell culture expression was also significantly correlated to endogenous promoter-gene expression in leaf tissues as measured by qRT-PCR (correlation coefficient of 0.80). Using the manual protocols that produced these results, we performed early stage experiments to automate protoplast transformation on a robotic system. After optimizing the protocol, we achieved up to 29% transformation efficiency using our robotic system. We conclude that the soybean cell culture-to-protoplast transformation screen is amenable to automate promoter and gene screens in soybean that could be used to accelerate discoveries relevant for crop improvement. Key features of the system include low-cost, facile protoplast isolation, and transformation for soybean shoot tissue-relevant molecular screening.

Plant synthetic biology is a rapidly evolving field with new tools constantly emerging to drive innovation. Of particular interest is the application of synthetic biology to chloroplast biotechnology to generate plants capable of producing new metabolites, vaccines, biofuels, and high-value chemicals. Progress made in the assembly of large DNA molecules, composing multiple transcriptional units, has significantly aided in the ability to rapidly construct novel vectors for genetic engineering. In particular, Golden Gate assembly has provided a facile molecular tool for standardized assembly of synthetic genetic elements into larger DNA constructs. In this work, a complete modular chloroplast cloning system, MoChlo, was developed and validated for fast and flexible chloroplast engineering in plants. A library of 128 standardized chloroplast-specific parts (47 promoters, 38 5' untranslated regions [5'UTRs], nine promoter:5'UTR fusions, 10 3'UTRs, 14 genes of interest, and 10 chloroplast-specific destination vectors) were mined from the literature and modified for use in MoChlo assembly, along with chloroplast-specific destination vectors. The strategy was validated by assembling synthetic operons of various sizes and determining the efficiency of assembly. This method was successfully used to generate chloroplast transformation vectors containing up to seven transcriptional units in a single vector (∼10.6-kb synthetic operon). To enable researchers with limited resources to engage in chloroplast biotechnology, and to accelerate progress in the field, the entire kit, as described, is available through Addgene at minimal cost. Thus, the MoChlo kit represents a valuable tool for fast and flexible design of heterologous metabolic pathways for plastid metabolic engineering., (© 2019 American Society of Plant Biologists. All Rights Reserved.)

Efficient plant protoplast production from cell suspension cultures, leaf, and stem tissue allows for single-cell plant biology. Since protoplasts do not have cell walls, they can be readily transformed to enable rapid assessment of regulatory elements, synthetic constructs, gene expression, and more recently genome-editing tools and approaches. Historically, enzymatic cell wall digestion has been both expensive and laborious. Protoplast production, transformation, and analysis of fluorescence have recently been automated using an integrated robotic system. Here we describe its use for bulk protoplast isolation, counting, transformation, and analysis at very low cost for high-throughput experiments.

Owing to its small size, prokaryotic-like molecular genetics, and potential for very high transgene expression, the plastid genome (plastome) is an attractive plant synthetic biology chassis for metabolic engineering. The plastome exists as a homogenous, compact, multicopy genome within multiple-specialized differentiated plastid compartments. Because of this multiplicity, transgenes can be highly expressed. For coordinated gene expression, it is the prokaryotic molecular genetics that is an especially attractive feature. Multiple genes in a metabolic pathway can be expressed in a series of operons, which are regulated at the transcriptional and translational levels with cross talk from the plant's nuclear genome. Key features of each regulatory level are reviewed, as well as some examples of plastome-enabled metabolic engineering. We also speculate about the transformative future of plastid-based synthetic biology to enable metabolic engineering in plants as well as the problems that must be solved before routine plastome-enabled synthetic circuits can be installed.

Genome editing is a powerful suite of technologies utilized in basic and applied plant research. Both nuclear and plastid genomes have been genetically engineered to alter traits in plants. While the most frequent molecular outcome of gene editing has been knockouts resulting in a simple deletion of an endogenous protein of interest from the host's proteome, new genes have been added to plant genomes and, in several instances, the sequence of endogenous genes have been targeted for a few coding changes. Targeted plant characteristics for genome editing range from single gene targets for agronomic input traits to metabolic pathways to endow novel plant function. In this paper, we review the fundamental approaches to editing nuclear and plastid genomes in plants with an emphasis on those utilizing synthetic biology. The differences between the eukaryotic-type nuclear genome and the prokaryotic-type plastid genome (plastome) in plants has profound consequences in the approaches employed to transform, edit, select transformants, and indeed, nearly all aspects of genetic engineering procedures. Thus, we will discuss the two genomes targeted for editing in plants, the toolbox used to make edits, along with strategies for future editing approaches to transform crop production and sustainability. While CRISPR/Cas9 is the current method of choice in editing nuclear genomes, the plastome is typically edited using homologous recombination approaches. A particularly promising synthetic biology approach is to replace the endogenous plastome with a 'synplastome' that is computationally designed, and synthesized and assembled in the lab, then installed into chloroplasts. The editing strategies, transformation methods, characteristics of the novel plant also affect how the genetically engineered plant may be governed and regulated. Each of these components and final products of gene editing affect the future of biotechnology and farming., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Climbing plants have unique adaptations to enable them to compete for sunlight, for which they invest minimal resources for vertical growth. Indeed, their stems bear relatively little weight, as they traverse their host substrates skyward. Climbers possess high tensile strength and flexibility, which allows them to utilize natural and manmade structures for support and growth. The climbing strategies of plants have intrigued scientists for centuries, yet our understanding about biochemical adaptations and their molecular undergirding is still in the early stages of research. Nonetheless, recent discoveries are promising, not only from a basic knowledge perspective, but also for bioinspired product development. Several adaptations, including nanoparticle and adhesive production will be reviewed, as well as practical translation of these adaptations to commercial applications. We will review the botanical literature on the modes of adaptation to climb, as well as specialized organs-and cellular innovations. Finally, recent molecular and biochemical data will be reviewed to assess the future needs and new directions for potential practical products that may be bioinspired by climbing plants.

Background: Panicum hallii Vasey (Hall's panicgrass) is a compact, perennial C 4 grass in the family Poaceae, which has potential to enable bioenergy research for switchgrass (Panicum virgatum L.). Unlike P. hallii, switchgrass has a large genome, allopolyploidy, self-incompatibility, a long life cycle, and large stature-all suboptimal traits for rapid genetics research. Herein we improved tissue culture methodologies for two inbred P. hallii populations: FIL2 and HAL2, to enable further development of P. hallii as a model C 4 plant., Results: The optimal seed-derived callus induction medium was determined to be Murashige and Skoog (MS) medium supplemented with 40 mg L -1 L-cysteine, 300 mg L -1 L-proline, 3% sucrose, 1 g L -1 casein hydrolysate, 3 mg L -1 2,4-dichlorophenoxyacetic acid (2,4-D), and 45 μg L -1 6-benzylaminopurine (BAP), which resulted in callus induction of 51 ± 29% for FIL2 and 81 ± 19% for HAL2. The optimal inflorescence-derived callus induction was observed on MP medium (MS medium supplemented with 2 g L -1 L-proline, 3% maltose, 5 mg L -1 2,4-D, and 500 μg L -1 BAP), resulting in callus induction of 100 ± 0.0% for FIL2 and 84 ± 2.4% for HAL2. Shoot regeneration rates of 11.5 ± 0.8 shoots/gram for FIL2 and 11.3 ± 0.6 shoots/gram for HAL2 were achieved using seed-induced callus, whereas shoot regeneration rates of 26.2 ± 2.6 shoots/gram for FIL2 and 29.3 ± 3.6 shoots/gram for HAL2 were achieved from inflorescence-induced callus. Further, cell suspension cultures of P. hallii were established from seed-derived callus, providing faster generation of callus tissue compared with culture using solidified media (1.41-fold increase for FIL2 and 3.00-fold increase for HAL2)., Conclusions: Aside from abbreviated tissue culture times from callus induction to plant regeneration for HAL2, we noted no apparent differences between FIL2 and HAL2 populations in tissue culture performance. For both populations, the cell suspension cultures outperformed tissue cultures on solidified media. Using the methods developed in this work, P. hallii callus was induced from seeds immediately after harvest in a shorter time and with higher frequencies than switchgrass. For clonal propagation, P. hallii callus was established from R1 inflorescences, similar to switchgrass, which further strengthens the potential of this plant as a C 4 model for genetic studies. The rapid cycling (seed-to-seed time) and ease of culture, further demonstrate the potential utility of P. hallii as a C 4 model plant.

Drug resistance of bacterial pathogens is a growing problem that can be addressed through the discovery of compounds with novel mechanisms of antibacterial activity. Natural products, including plant phenolic compounds, are one source of diverse chemical structures that could inhibit bacteria through novel mechanisms. However, evaluating novel antibacterial mechanisms of action can be difficult and is uncommon in assessments of plant phenolic compounds. With systems biology approaches, though, antibacterial mechanisms can be assessed without the bias of target-directed bioassays to enable the discovery of novel mechanism(s) of action against drug resistant microorganisms. This review article summarizes the current knowledge of antibacterial mechanisms of action of plant phenolic compounds and discusses relevant methodology.

Arundo donax L. is a promising biofuel feedstock in the Mediterranean region. Despite considerable interest in its genetic improvement, Arundo tissue culture and transformation remains arduous. The authors developed methodologies for cell- and tissue culture and genetic engineering in Arundo. A media screen was conducted, and a suspension culture was established using callus induced from stem axillary bud explants. DBAP medium, containing 9 µM 2,4-D and 4.4 µM BAP, was found to be the most effective medium among those tested for inducing cell suspension cultures, which resulted in a five-fold increase in tissue mass over 14 days. In contrast, CIM medium containing 13 µM 2,4-D, resulted in just a 1.4-fold increase in mass over the same period. Optimized suspension cultures were superior to previously-described solidified medium-based callus culture methods for tissue mass increase. Suspension cultures proved to be very effective for subsequent protoplast isolation. Protoplast electroporation resulted in a 3.3 ± 1.5% transformation efficiency. A dual fluorescent reporter gene vector enabled the direct comparison of the CAMV 35S promoter with the switchgrass ubi2 promoter in single cells of Arundo. The switchgrass ubi2 promoter resulted in noticeably higher reporter gene expression compared with that conferred by the 35S promoter in Arundo., (Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Over the last decade there has been a resurgence in the use of plant protoplasts that range from model species to crop species, for analysis of signal transduction pathways, transcriptional regulatory networks, gene expression, genome-editing, and gene-silencing. Furthermore, significant progress has been made in the regeneration of plants from protoplasts, which has generated even more interest in the use of these systems for plant genomics. In this work, a protocol has been developed for automation of protoplast isolation and transformation from a 'Bright Yellow' 2 (BY-2) tobacco suspension culture using a robotic platform. The transformation procedures were validated using an orange fluorescent protein (OFP) reporter gene (pporRFP) under the control of the Cauliflower mosaic virus 35S promoter (35S). OFP expression in protoplasts was confirmed by epifluorescence microscopy. Analyses also included protoplast production efficiency methods using propidium iodide. Finally, low-cost food-grade enzymes were used for the protoplast isolation procedure, circumventing the need for lab-grade enzymes that are cost-prohibitive in high-throughput automated protoplast isolation and analysis. Based on the protocol developed in this work, the complete procedure from protoplast isolation to transformation can be conducted in under 4 hr, without any input from the operator. While the protocol developed in this work was validated with the BY-2 cell culture, the procedures and methods should be translatable to any plant suspension culture/protoplast system, which should enable acceleration of crop genomics research.

Key Message: A switchgrass protoplast system was developed, achieving a cost reduction of ~1000-fold, a threefold increase in transformation efficiency, and a fourfold reduction in required DNA quantity compared to previous methods. In recent years, there has been a resurgence in the use of protoplast systems for rapid screening of gene silencing and genome-editing targets for siRNA, miRNA, and CRISPR technologies. In the case of switchgrass (Panicum virgatum L.), to achieve economic feasibility for biofuel production, it is necessary to develop plants with decreased cell wall recalcitrance to reduce processing costs. To achieve this goal, transgenic plants have been generated with altered cell wall chemistry; however, with limited success owing to the complexity of cell walls. Because of the considerable cost, time, and effort required to screen transgenic plants, a protoplast system that can provide data at an early stage has potential to eliminate low performing candidate genes/targets prior to the creation of transgenic plants. Despite the advantages of protoplast systems, protoplast isolation in switchgrass has proven costly, requiring expensive lab-grade enzymes and high DNA quantities. In this paper, we describe a low-cost protoplast isolation system using a mesophyll culture approach and a cell suspension culture. Results from this work show a cost reduction of ~1000-fold compared to previous methods of protoplast isolation in switchgrass, with a cost of $0.003 (USD) per reaction for mesophyll protoplasts and $0.018 for axenic cell culture-derived protoplasts. Further, the efficiency of protoplast transformation was optimized threefold over previous methods, despite a fourfold reduction in DNA quantity. The methods developed in this work remove the cost barrier previously limiting high-throughput screening of genome-editing and gene silencing targets in switchgrass, paving the way for more efficient development of transgenic plants.

Many health benefits have been associated with tea consumption. In an effort to elucidate the source of these health benefits, numerous phytochemicals have been extracted from tea infusions, some of which have demonstrated promise as clinical therapeutics for cancer therapy. Considering the advantageous properties of organic nanoparticles, the purpose of this study is to develop a method for isolating nanoparticles from tea leaves, and explore potential biomedical applications for these nanoparticles. First, an infusion-dialysis procedure for isolating tea nanoparticles (TNPs) from green tea infusions is developed. Second, atomic force microscopy and scanning electron microscopy reveal that the TNPs are spherical with diameters of 100-300 nm. Third, electrophoretic light scattering is used to determine that the TNPs have a zeta potential of -26.52 mV at pH 7.0. Finally, chemical analysis demonstrates that (-) Epigallocatechin gallate, caffeine, and theobromine are not found in the TNPs. Interestingly, the TNPs do enhance the in vitro secretion of cytokines IL-6, TNF-alpha, and G-CSF, as well as the chemokines RANTES, IP-10, MDC from mouse macrophages RAW264.7, indicating an immunostimulatory effect. As a nanocarrier, the TNPs are able to form complexes with doxorubicin (DOX) and have the potential for applications in drug delivery. Further the DOX-loaded TNPs increase the cellular DOX uptake, compared to free DOX, leading to higher cytotoxicity in the A549 human lung cancer and MCF-7 breast cancer cells. More importantly, the DOX-loaded TNPs significantly increase the DOX uptake and cytotoxicity in MCF-7/ADR multidrug resistant breast cancer cells. In this work, an infusion-dialysis procedure is developed for isolation of the TNPs from green tea, and the potential of these nanoparticles as a multifunctional nanocarrier for cancer therapy in vitro is explored.

The purpose of this study was to design and fabricate a new cyclic peptide-based nanotube (CPNT) and to explore its potential application in cancer therapy. For such a purpose, the CPNT bundles with a diameter of -10 nm and a length of -50-80 nm, self-assembled in a micro-scaled aggregate, were first prepared using a glutamic acid and a cysteine residue-containing cyclic octapeptide. In order to explore the potential application of these supramolecular structures, the CPNTs were loaded with doxorubicin (DOX), and further modified using polyethylene glycol (PEG). The PEG-modified DOX-loaded CPNTs, showing high drug encapsulation ratio, were nano-scaled dispersions with a diameter of -50 nm and a length of -200-300 nm. More importantly, compared to free DOX, the PEG-modified DOX-loaded CPNT bundles demonstrated higher cytotoxicity, increased DOX uptake and altered intracellular distribution of DOX in human breast cancer MCF-7/ADR cells in vitro. In addition, an enhanced inhibition of P-gp activity was observed in MCF-7/ADR cells by the PEG-modified DOX-loaded CPNT bundles, which shows their potential to overcome the multidrug resistance in tumor therapy. These findings indicate that using cyclic peptide-based supramolecular structures as nanocarriers is a feasible and a potential solution for drug delivery to resistant tumor cells.

In this work, a high-speed imaging platform and a resistive force theory (RFT) based model were applied to investigate multi-flagellated propulsion, using Tritrichomonas foetus as an example. We discovered that T. foetus has distinct flagellar beating motions for linear swimming and turning, similar to the 'run and tumble' strategies observed in bacteria and Chlamydomonas. Quantitative analysis of the motion of each flagellum was achieved by determining the average flagella beat motion for both linear swimming and turning, and using the velocity of the flagella as inputs into the RFT model. The experimental approach was used to calculate the curvature along the length of the flagella throughout each stroke. It was found that the curvatures of the anterior flagella do not decrease monotonically along their lengths, confirming the ciliary waveform of these flagella. Further, the stiffness of the flagella was experimentally measured using nanoindentation, allowing for calculation of the flexural rigidity of T. foetus's flagella, 1.55×10(-21) N m(2). Finally, using the RFT model, it was discovered that the propulsive force of T. foetus was similar to that of sperm and Chlamydomonas, indicating that multi-flagellated propulsion does not necessarily contribute to greater thrust generation, and may have evolved for greater manoeuvrability or sensing. The results from this study have demonstrated the highly coordinated nature of multi-flagellated propulsion and have provided significant insights into the biology of T. foetus.

Trichomonas gallinae is a ubiquitous flagellated protozoan parasite, and the most common etiologic agent of epidemic trichomonosis in columbid and passerine species. In this study, free-ranging Pacific Coast band-tailed pigeons (Patagioenas fasciata monilis) in California (USA) were found to be infected with trichomonad protozoa that were genetically and morphologically distinct from T. gallinae. In microscopic analysis, protozoa were significantly smaller in length and width than T. gallinae and were bimodal in morphology. Phylogenetic analysis of the ITS1/5.8S/ITS2, rpb1, and hydrogenosomal Fe-hydrogenase regions revealed that the protozoan shares an ancestor with Trichomonas vaginalis, the sexually-transmitted agent of trichomoniasis in humans. Clinical and pathologic features of infected birds were similar to infections with T. gallinae. Evidence presented here strongly support taxonomical distinction of this parasite, which we hereby name Trichomonas stableri n. sp. This work contributes to a growing body of evidence that T. gallinae is not the sole etiologic agent of avian trichomonosis, and that the incorporation of molecular tools is critical in the investigation of infectious causes of mortality in birds.

Bio-inspiration for novel adhesive development has drawn increasing interest in recent years with the discovery of the nanoscale morphology of the gecko footpad and mussel adhesive proteins. Similar to these animal systems, it was discovered that English ivy (Hedera helix L.) secretes a high strength adhesive containing uniform nanoparticles. Recent studies have demonstrated that the ivy nanoparticles not only contribute to the high strength of this adhesive, but also have ultraviolet (UV) protective abilities, making them ideal for sunscreen and cosmetic fillers, and may be used as nanocarriers for drug delivery. To make these applications a reality, the chemical nature of the ivy nanoparticles must be elucidated. In the current work, a method was developed to harvest bulk ivy nanoparticles from an adventitious root culture system, and the chemical composition of the nanoparticles was analysed. UV/visible spectroscopy, inductively coupled plasma mass spectrometry, Fourier transform infrared spectroscopy and electrophoresis were used in this study to identify the chemical nature of the ivy nanoparticles. Based on this analysis, we conclude that the ivy nanoparticles are proteinaceous.

The goal of this work was to analyze the propulsion of multiflagellated microorganisms, and to draw insight to the underlying physics and biology of the movement. Giardia lamblia was chosen as the model organism due to its unique ability to mechanically attach to various surfaces, its rapid movement, and its fine control over steering and navigation. In this work, a mechanics model was utilized to study the mechanics and propulsive contribution of the ventral and anterior flagella in Giardia. It was discovered that energy is supplied mainly at the proximal portion of these flagella, supporting the hypothesis that a decreasing adenosine triphosphate (ATP) gradient along the length of the flagella would not affect the motion observed. Similarly, the elasticity of the flagella allows the energy input at the proximal portion to be transferred to the distal portion, where the majority of thrust is generated. Specifically, we found that the ventral flagella are the driving force for planar propulsion and turning, while the anterior flagella are used for steering and control.