Search

Extended Reality is a revolutionary method of delivering multimedia content to users. A large contributor to its popularity is the sense of immersion and interactivity enabled by having real-world motion reflected in the virtual experience accurately and immediately. This user motion, mainly caused by head rotations, induces several technical challenges. For instance, which content is generated and transmitted depends heavily on where the user is looking. Seamless systems, taking user motion into account proactively, will therefore require accurate predictions of upcoming rotations. Training and evaluating such predictors requires vast amounts of orientational input data, which is expensive to gather, as it requires human test subjects. A more feasible approach is to gather a modest dataset through test subjects, and then extend it to a more sizeable set using synthetic data generation methods. In this work, we present a head rotation time series generator based on TimeGAN, an extension of the well-known Generative Adversarial Network, designed specifically for generating time series. This approach is able to extend a dataset of head rotations with new samples closely matching the distribution of the measured time series., Comment: Published and presented at International Conference on Multimedia 2022 (ACMMM), Workshop on Interactive eXtended Reality (IXR)

Achieving extremely high-quality and truly immersive interactive Virtual Reality (VR) is expected to require a wireless link to the cloud, providing multi-gigabit throughput and extremely low latency. A prime candidate for fulfilling these requirements is millimeter-wave (mmWave) communications, operating in the 30 to 300 GHz bands, rather than the traditional sub-6 GHz. Evaluations with first-generation mmWave Wi-Fi hardware, based on the IEEE 802.11ad standard, have so far largely remained limited to lower-layer metrics. In this work, we present the first experimental analysis of the capabilities of mmWave for streaming VR content, using a novel testbed capable of repeatably creating blockage through mobility. Using this testbed, we show that (a) motion may briefly interrupt transmission, (b) a broken line of sight may degrade throughput unpredictably, and (c) TCP-based streaming frameworks need careful tuning to behave well over mmWave., Comment: Published and presented at International Conference on Network of the Future 2022

Extended Reality (XR) enables a plethora of novel interactive shared experiences. Ideally, users are allowed to roam around freely, while audiovisual content is delivered wirelessly to their Head-Mounted Displays (HMDs). Therefore, truly immersive experiences will require massive amounts of data, in the range of tens of gigabits per second, to be delivered reliably at extremely low latencies. We identify Millimeter-Wave (mmWave) communications, at frequencies between 24 and 300 GHz, as a key enabler for such experiences. In this article, we show how the mmWave state of the art does not yet achieve sufficient performance, and identify several key active research directions expected to eventually pave the way for extremely-high-quality mmWave-enabled interactive multi-user XR., Comment: Published in IEEE Communications Magazine

This paper focuses on enhancing the energy efficiency (EE) of a cooperative network featuring a `miniature' unmanned aerial vehicle (UAV) that operates at terahertz (THz) frequencies, utilizing holographic surfaces to improve the network's performance. Unlike traditional reconfigurable intelligent surfaces (RIS) that are typically used as passive relays to adjust signal reflections, this work introduces a novel concept: Energy harvesting (EH) using reconfigurable holographic surfaces (RHS) mounted on the miniature UAV. In this system, a source node facilitates the simultaneous reception of information and energy signals by the UAV, with the harvested energy from the RHS being used by the UAV to transmit data to a specific destination. The EE optimization involves adjusting non-orthogonal multiple access (NOMA) power coefficients and the UAV's flight path, considering the peculiarities of the THz channel. The optimization problem is solved in two steps. Initially, the trajectory is refined using a successive convex approximation (SCA) method, followed by the adjustment of NOMA power coefficients through a quadratic transform technique. The effectiveness of the proposed algorithm is demonstrated through simulations, showing superior results when compared to baseline methods.

Flow-guided localization using in-body nanodevices in the bloodstream is expected to be beneficial for early disease detection, continuous monitoring of biological conditions, and targeted treatment. The nanodevices face size and power constraints that produce erroneous raw data for localization purposes. On-body anchors receive this data, and use it to derive the locations of diagnostic events of interest. Different Machine Learning (ML) approaches have been recently proposed for this task, yet they are currently restricted to a reference bloodstream of a resting patient. As such, they are unable to deal with the physical diversity of patients' bloodstreams and cannot provide continuous monitoring due to changes in individual patient's activities. Toward addressing these issues for the current State-of-the-Art (SotA) flow-guided localization approach based on Graph Neural Networks (GNNs), we propose a pipeline for GNN adaptation based on individual physiological indicators including height, weight, and heart rate. Our results indicate that the proposed adaptions are beneficial in reconciling the individual differences between bloodstreams and activities., Comment: 7 pages, 9 figures, 2 tables, 16 references, accepted at ACM NanoCom'25

Achieving high-quality wireless interactive Extended Reality (XR) will require multi-gigabit throughput at extremely low latency. The Millimeter-Wave (mmWave) frequency bands, between 24 and 300GHz, can achieve such extreme performance. However, maintaining a consistently high Quality of Experience with highly mobile users is challenging, as mmWave communications are inherently directional. In this work, we present and evaluate an end-to-end approach to such a mmWave-based mobile XR system. We perform a highly realistic simulation of the system, incorporating accurate XR data traffic, detailed mmWave propagation models and actual user motion. We evaluate the impact of the beamforming strategy and frequency on the overall performance. In addition, we provide the first system-level evaluation of the CoVRage algorithm, a proactive and spatially aware user-side beamforming approach designed specifically for highly mobile XR environments., Comment: Published and presented at IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) 2024

Advancements in nanotechnology and material science are paving the way toward nanoscale devices that combine sensing, computing, data and energy storage, and wireless communication. In precision medicine, these nanodevices show promise for disease diagnostics, treatment, and monitoring from within the patients' bloodstreams. Assigning the location of a sensed biological event with the event itself, which is the main proposition of flow-guided in-body nanoscale localization, would be immensely beneficial from the perspective of precision medicine. The nanoscale nature of the nanodevices and the challenging environment that the bloodstream represents, result in current flow-guided localization approaches being constrained in their communication and energy-related capabilities. The communication and energy constraints of the nanodevices result in different features of raw data for flow-guided localization, in turn affecting its performance. An analytical modeling of the effects of imperfect communication and constrained energy causing intermittent operation of the nanodevices on the raw data produced by the nanodevices would be beneficial. Hence, we propose an analytical model of raw data for flow-guided localization, where the raw data is modeled as a function of communication and energy-related capabilities of the nanodevice. We evaluate the model by comparing its output with the one obtained through the utilization of a simulator for objective evaluation of flow-guided localization, featuring comparably higher level of realism. Our results across a number of scenarios and heterogeneous performance metrics indicate high similarity between the model and simulator-generated raw datasets., Comment: 6 pages, 7 figures, 4 tables, 16 references. arXiv admin note: substantial text overlap with arXiv:2307.05551

This paper proposes an energy efficient resource allocation design algorithm for an intelligent reflecting surface (IRS)-assisted downlink ultra-reliable low-latency communication (URLLC) network. This setup features a multi-antenna base station (BS) transmitting data traffic to a group of URLLC users with short packet lengths. We maximize the total network's energy efficiency (EE) through the optimization of active beamformers at the BS and passive beamformers (a.k.a. phase shifts) at the IRS. The main non-convex problem is divided into two sub-problems. An alternating optimization (AO) approach is then used to solve the problem. Through the use of the successive convex approximation (SCA) with a novel iterative rank relaxation method, we construct a concave-convex objective function for each sub-problem. The first sub-problem is a fractional program that is solved using the Dinkelbach method and a penalty-based approach. The second sub-problem is then solved based on semi-definite programming (SDP) and the penalty-based approach. The iterative solution gradually approaches the rank-one for both the active beamforming and unit modulus IRS phase-shift sub-problems. Our results demonstrate the efficacy of the proposed solution compared to existing benchmarks.

Contemporary research advances in nanotechnology and material science are rooted in the emergence of nanodevices as a versatile tool that harmonizes sensing, computing, wireless communication, data storage, and energy harvesting. These devices offer novel pathways for disease diagnostics, treatment, and monitoring within the bloodstreams. Ensuring precise localization of events of diagnostic interest, which underpins the concept of flow-guided in-body nanoscale localization, would provide an added diagnostic value to the detected events. Raw data generated by the nanodevices is pivotal for this localization and consist of an event detection indicator and the time elapsed since the last passage of a nanodevice through the heart. The energy constraints of the nanodevices lead to intermittent operation and unreliable communication, intrinsically affecting this data. This posits a need for comprehensively modelling the features of this data. These imperfections also have profound implications for the viability of existing flow-guided localization approaches, which are ill-prepared to address the intricacies of the environment. Our first contribution lies in an analytical model of raw data for flow-guided localization, dissecting how communication and energy capabilities influence the nanodevices' data output. This model acts as a vital bridge, reconciling idealized assumptions with practical challenges of flow-guided localization. Toward addressing these practical challenges, we also present an integration of Graph Neural Networks (GNNs) into the flow-guided localization paradigm. GNNs excel in capturing complex dynamic interactions inherent to the localization of events sensed by the nanodevices. Our results highlight the potential of GNNs not only to enhance localization accuracy but also extend coverage to encompass the entire bloodstream., Comment: 16 pages, 16 figures, 6 tables, 45 references

Nanodevices with Terahertz (THz)-based wireless communication capabilities are providing a primer for flow-guided localization within the human bloodstreams. Such localization is allowing for assigning the locations of sensed events with the events themselves, providing benefits along the lines of early and precise diagnostics, and reduced costs and invasiveness. Flow-guided localization is still in a rudimentary phase, with only a handful of works targeting the problem. Nonetheless, the performance assessments of the proposed solutions are already carried out in a non-standardized way, usually along a single performance metric, and ignoring various aspects that are relevant at such a scale (e.g., nanodevices' limited energy) and for such a challenging environment (e.g., extreme attenuation of in-body THz propagation). As such, these assessments feature low levels of realism and cannot be compared in an objective way. Toward addressing this issue, we account for the environmental and scale-related peculiarities of the scenario and assess the performance of two state-of-the-art flow-guided localization approaches along a set of heterogeneous performance metrics such as the accuracy and reliability of localization., Comment: 6 pages, 4 figures, 2 tables, 14 references, accepted at ACM NanoCom'24

The advancement of Virtual Reality (VR) technology is focused on improving its immersiveness, supporting multiuser Virtual Experiences (VEs), and enabling users to move freely within their VEs while remaining confined to specialized VR setups through Redirected Walking (RDW). To meet their extreme data-rate and latency requirements, future VR systems will require supporting wireless networking infrastructures operating in millimeter Wave (mmWave) frequencies that leverage highly directional communication in both transmission and reception through beamforming and beamsteering. We propose the use of predictive context-awareness to optimize transmitter and receiver-side beamforming and beamsteering. By predicting users' short-term lateral movements in multiuser VR setups with Redirected Walking (RDW), transmitter-side beamforming and beamsteering can be optimized through Line-of-Sight (LoS) "tracking" in the users' directions. At the same time, predictions of short-term orientational movements can be utilized for receiver-side beamforming for coverage flexibility enhancements. We target two open problems in predicting these two context information instances: i) predicting lateral movements in multiuser VR settings with RDW, and ii) generating synthetic head rotation datasets for training orientational movements predictors. Our experimental results demonstrate that Long Short-Term Memory (LSTM) networks feature promising accuracy in predicting lateral movements, and context-awareness stemming from VEs further enhances this accuracy. Additionally, we show that a TimeGAN-based approach for orientational data generation can create synthetic samples that closely match experimentally obtained ones., Comment: 7 pages, 6 figures

Nanoscale devices with Terahertz (THz) communication capabilities are envisioned to be deployed within human bloodstreams. Such devices will enable fine-grained sensing-based applications for detecting early indications (i.e., biomarkers) of various health conditions, as well as actuation-based ones such as targeted drug delivery. Associating the locations of such events with the events themselves would provide an additional utility for precision diagnostics and treatment. This vision yielded a new class of in-body localization coined under the term "flow-guided nanoscale localization". Such localization can be piggybacked on THz communication for detecting body regions in which biological events were observed based on the duration of one circulation of a nanodevice in the bloodstream. From a decades-long research on objective benchmarking of "traditional" indoor localization, as well as its eventual standardization (e.g., ISO/IEC 18305:2016), we know that in early stages the reported performance results were often incomplete (e.g., targeting a subset of relevant performance metrics), carrying out benchmarking experiments in different evaluation environments and scenarios, and utilizing inconsistent performance indicators. To avoid such a "lock-in" in flow-guided localization, in this paper we propose a workflow for standardized performance evaluation of such localization. The workflow is implemented in the form of an open-source simulation framework that is able to jointly account for the mobility of the nanodevices, in-body THz communication between with on-body anchors, and energy-related and other technological constraints (e.g., pulse-based modulation) at the nanodevice level. Accounting for these constraints, the framework is able to generate the raw data that can be streamlined into different flow-guided localization solutions for generating standardized performance benchmarks., Comment: 10 pages, 9 figures, 34 references, code available at: https://bitbucket.org/filip_lemic/flow-guided-localization-in-ns3/src/sequential/

Wireless communications at the chip scale emerge as a interesting complement to traditional wire-based approaches thanks to their low latency, inherent broadcast nature, and capacity to bypass pin constraints. However, as current trends push towards massive and bandwidth-hungry processor architectures, there is a need for wireless chip-scale networks that exploit and share as many channels as possible. In this context, this work addresses the issue of channel sharing by exploring the design space of multi-channel Medium Access Control (MAC) protocols for chip-scale networks. Distinct channel assignment strategies for both random access and token passing are presented and evaluated under realistic traffic patterns. It is shown that, even with the improvements enabled by the multiple channels, both protocols maintain their intrinsic advantages and disadvantages., Comment: Accepted for lecture presentation at IEEE ISCAS 2023

Contemporary Virtual Reality (VR) setups often include an external source delivering content to a Head-Mounted Display (HMD). "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. The massive bandwidth of higher frequencies, such as the millimeter-wave (mmWave) band, can meet these requirements. Due to high attenuation and path loss in the mmWave frequencies, beamforming is essential. In wireless VR, where the antenna is integrated into the HMD, any head rotation also changes the antenna's orientation. As such, beamforming must adapt, in real-time, to the user's head rotations. An HMD's built-in sensors providing accurate orientation estimates may facilitate such rapid beamforming. In this work, we present coVRage, a receive-side beamforming solution tailored for VR HMDs. Using built-in orientation prediction present on modern HMDs, the algorithm estimates how the Angle of Arrival (AoA) at the HMD will change in the near future, and covers this AoA trajectory with a dynamically shaped oblong beam, synthesized using sub-arrays. We show that this solution can cover these trajectories with consistently high gain, even in light of temporally or spatially inaccurate orientational data., Comment: Published in IEEE Transactions on Wireless Communications

Full-immersive multiuser Virtual Reality (VR) envisions supporting unconstrained mobility of the users in the virtual worlds, while at the same time constraining their physical movements inside VR setups through redirected walking. For enabling delivery of high data rate video content in real-time, the supporting wireless networks will leverage highly directional communication links that will "track" the users for maintaining the Line-of-Sight (LoS) connectivity. Recurrent Neural Networks (RNNs) and in particular Long Short-Term Memory (LSTM) networks have historically presented themselves as a suitable candidate for near-term movement trajectory prediction for natural human mobility, and have also recently been shown as applicable in predicting VR users' mobility under the constraints of redirected walking. In this work, we extend these initial findings by showing that Gated Recurrent Unit (GRU) networks, another candidate from the RNN family, generally outperform the traditionally utilized LSTMs. Second, we show that context from a virtual world can enhance the accuracy of the prediction if used as an additional input feature in comparison to the more traditional utilization of solely the historical physical movements of the VR users. Finally, we show that the prediction system trained on a static number of coexisting VR users be scaled to a multi-user system without significant accuracy degradation., Comment: 7 pages, 9 figures, 2 tables

The 6th generation of wireless communication (6G) is envisioned to give rise to various technologies for improving the end-to-end communication performance, where the communication is envisioned to utilize wireless signals in the millimeter wave (mmWave) frequencies and above. Among others, these technologies comprise Intelligent Reflective Surfaces (IRSs) and Mobile Relays (MRs), whose envisaged roles include mitigating the negative effects of Non-Line-of-Sight (NLoS) connectivity, in particular at mmWave and higher frequencies. The core idea behind these technologies is to use cooperative networking where the source sends a signal to a repeater, in this case the IRS or the MR, which is upon reception forwarded to the destination. When comparing the two technologies, it is important to realize that the IRSs are primarily envisioned to be static entities attached to various objects in the environment such as walls and furniture. In contrast, the MRs will feature a higher degree of freedom, as they will be able to position themselves seamlessly in the environment. Based on the above assumptions, we derive an approach for determining the optimal position of the IRS and MR in indoor environments, i.e., the one that maximizes the end-to-end link quality between the source and the destination. We follow by capturing the communication quality indicators for both IRS- and MR-supported NLoS avoidance in indoor mmWave communication in a number of scenarios. Our results show that, from the end-to-end link quality perspective, the MRs generally outperform the IRSs, suggesting their utilization potential for throughput-optimized NLoS avoidance scenarios., Comment: 6 pages, 5 figures

Radio Environmental Maps (REMs) are a powerful tool for enhancing the performance of various communication and networked agents. However, generating REMs is a laborious undertaking, especially in complex 3-Dimensional (3D) environments, such as indoors. To address this issue, we propose a system for autonomous generation of fine-grained REMs of indoor 3D spaces. In the system, multiple small indoor Unmanned Aerial Vehicles (UAVs) are sequentially used for 3D sampling of signal quality indicators. The collected readings are streamlined to a Machine Learning (ML) system for its training and, once trained, the system is able to predict the signal quality at unknown 3D locations. The system enables automated and autonomous REM generation, and can be straightforwardly deployed in new environments. In addition, the system supports REM sampling without self-interference and is technology-agnostic, as long as the REM-sampling receivers features suitable sizes and weights to be carried by the UAVs. In the demonstration, we instantiate the system design using two UAVs and show its capability of visiting 72 waypoints and gathering thousands of Wi-Fi data samples. Our results also include an instantiation of the ML system for predicting the Received Signal Strength (RSS) of known Wi-Fi Access Points (APs) at locations not visited by the UAVs.

Terahertz (THz) communications are envisioned as a key technology of next-generation wireless systems due to its ultra-broad bandwidth. One step forward, THz integrated sensing and communication (ISAC) system can realize both unprecedented data rates and millimeter-level accurate sensing. However, THz ISAC meets stringent challenges on waveform and receiver design to fully exploit the peculiarities of THz channel and transceivers. In this work, a sensing integrated discrete Fourier transform spread orthogonal frequency division multiplexing (SI-DFT-s-OFDM) system is proposed for THz ISAC, which can provide lower peak-to-average power ratio than OFDM and is adaptive to flexible delay spread of the THz channel. Without compromising communication capabilities, the proposed SI-DFT-s-OFDM realizes millimeter-level range estimation and decimeter-per-second-level velocity estimation accuracy. In addition, the bit error rate (BER) performance is improved by 5 dB gain at the $10^{-3}$ BER level compared with OFDM. At the receiver, a deep learning based ISAC receiver with two neural networks is developed to recover transmitted data and estimate target range and velocity, while mitigating the imperfections and non-linearities of THz systems. Extensive simulation results demonstrate that the proposed deep learning methods can realize mutually enhanced performance for communication and sensing, and is robust against Doppler effects, phase noise, and multi-target estimation.

Contemporary Virtual Reality (VR) setups commonly consist of a Head-Mounted Display (HMD) tethered to a content-generating server. "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. Higher frequencies, such as the millimeter-wave (mmWave) band, can support these requirements. Due to high attenuation and path loss in the mmWave frequencies, beamforming is essential. For VR setups, beamforming must adapt in real-time to the user's head rotations, but can rely on the HMD's built-in sensors providing accurate orientation estimates. In this work, we present coVRage, a beamforming solution tailored for VR HMDs. Based on past and current head orientations, the HMD predicts how the Angle of Arrival (AoA) from the access point will change in the near future, and covers this AoA trajectory with a dynamically shaped beam, synthesized using sub-arrays. We show that this solution can cover such trajectories with consistently high gain, unlike regular single-beam solutions.

Nanoscale wireless networks are expected to revolutionize a variety of domains, with significant advances conceivable in in-body healthcare. In healthcare, these nanonetworks will consist of energy-harvesting nanodevices passively flowing through the bloodstream, taking actions at certain locations, and communicating results to more powerful Body Area Network (BAN) nodes. Assuming such a setup and electromagnetic nanocommunication in the Terahertz (THz) frequencies, we propose a network architecture that can support fine-grained localization of the energy-harvesting in-body nanonodes, as well as their two-way communication with the outside world. The main novelties of our proposal lie in the introduction of location-aware and Wake-up Radio (WuR)-based wireless nanocommunication paradigms, as well as Software-Defined Metamaterials (SDMs), to THz-operating energy-harvesting in-body nanonetworks. We argue that, on a high level, the proposed architecture can handle (and actually benefits from) a large number of nanonodes, while simultaneously dealing with a short range of THz in-body propagation and highly constrained nanonodes., Comment: 7 pages, 5 figures, 1 table

Software-Defined Metamaterials (SDMs) show a strong potential for advancing the engineered control of electromagnetic waves. As such, they are envisioned to enable a variety of exciting applications, among others in the domains of smart textiles, high-resolution structural monitoring, and sensing in challenging environments. Many of the applications envisage deformations of the SDM structures, such as their bending, stretching or rolling, which implies that the locations of metamaterial elements will be changing relative to one another. In this paper, we argue that if the metamaterial elements would be accurately localizable, this location information could potentially be utilized for enabling novel SDM applications, as well as for optimizing the control of the elements themselves. To enable their localization, we assume that these elements are controlled wirelessly through a Terahertz (THz)-operating nanonetwork. We consider the elements to be power-constrained, with their sole powering option being to harvest energy from different environmental sources. By means of simulation, we demonstrate sub-millimeter accuracy of the two-way Time of Flight (ToF)-based localization, as well as high availability of the service (i.e., consistently more than 80% of the time), which is a result of the low energy consumed in the localization process. Finally, we qualitatively characterize the latency of the proposed localization service, as well as outline several challenges and future research directions., Comment: 49 pages, 19 figures, 2 tables

The need for cables with high-fidelity Virtual Reality (VR) headsets remains a stumbling block on the path towards interactive multi-user VR. Due to strict latency constraints, designing fully wireless headsets is challenging, with the few commercially available solutions being expensive. These solutions use proprietary millimeter wave (mmWave) communications technologies, as extremely high frequencies are needed to meet the throughput and latency requirements of VR applications. In this work, we investigate whether such a system could be built using specification-compliant IEEE 802.11ad hardware, which would significantly reduce the cost of wireless mmWave VR solutions. We present a theoretical framework to calculate attainable live VR video bitrates for different IEEE 802.11ad channel access methods, using 1 or more head-mounted displays connected to a single Access Point (AP). Using the ns-3 simulator, we validate our theoretical framework, and demonstrate that a properly configured IEEE 802.11ad AP can support at least 8 headsets receiving a 4K video stream for each eye, with transmission latency under 1 millisecond., Comment: Published at 2020 IEEE Global Communications Conference (GLOBECOM)

Recent developments in nanotechnology herald nanometer-sized devices expected to bring light to a number of groundbreaking applications. Communication with and among nanodevices will be needed for unlocking the full potential of such applications. As the traditional communication approaches cannot be directly applied in nanocommunication, several alternative paradigms have emerged. Among them, electromagnetic nanocommunication in the terahertz (THz) frequency band is particularly promising, mainly due to the breakthrough of novel materials such as graphene. For this reason, numerous research efforts are nowadays targeting THz band nanocommunication and consequently nanonetworking. As it is expected that these trends will continue in the future, we see it beneficial to summarize the current status in these research domains. In this survey, we therefore aim to provide an overview of the current THz nanocommunication and nanonetworking research. Specifically, we discuss the applications envisioned to be supported by nanonetworks operating in the THz band, together with the requirements such applications pose on the underlying nanonetworks. Subsequently, we provide an overview of the current contributions on the different layers of the protocol stack, as well as the available channel models and experimentation tools. As the final contribution, we identify a number of open research challenges and outline several potential future research directions., Comment: 37 pages, 11 figures, 7 tables

Widespread adoption of indoor positioning systems based on WiFi fingerprinting is at present hindered by the large efforts required for measurements collection during the offline phase. Two approaches were recently proposed to address such issue: crowdsourcing and RSS radiomap prediction, based on either interpolation or propagation channel model fitting from a small set of measurements. RSS prediction promises better positioning accuracy when compared to crowdsourcing, but no systematic analysis of the impact of system parameters on positioning accuracy is available. This paper fills this gap by introducing ViFi, an indoor positioning system that relies on RSS prediction based on Multi-Wall Multi-Floor (MWMF) propagation model to generate a discrete RSS radiomap (virtual fingerprints). Extensive experimental results, obtained in multiple independent testbeds, show that ViFi outperforms virtual fingerprinting systems adopting simpler propagation models in terms of accuracy, and allows a sevenfold reduction in the number of measurements to be collected, while achieving the same accuracy of a traditional fingerprinting system deployed in the same environment. Finally, a set of guidelines for the implementation of ViFi in a generic environment, that saves the effort of collecting additional measurements for system testing and fine tuning, is proposed., Comment: Accepted to IEEE Transactions on Mobile Computing (March 2019)

A general theoretical framework for Fingerprinting Localization Algorithms (FPS), given their popularity, can be utilized for their performance studies. In this work, after setting up an abstract model for FPS, it is shown that fingerprinting-based localization problem can be cast as a hypothesis testing (HT) problem and therefore various results in HT literature can be used to provide insights, guidelines and performance bounds for general FPS. This framework results in characterization of scaling limits of localization reliability in terms of number of measurements and other environmental parameters. It is suggested that Kullback-Leibler (KL) divergence between probability distributions of selected feature for fingerprinting at different locations encapsulates information about both accuracy and latency and can be used as a central performance metric for studying FPS. Although developed for an arbitrary fingerprint, the framework is particularly used for studying simple Received Signal Strength (RSS)- based algorithm. The effect of various parameters on the performance of fingerprinting algorithms is discussed, which includes path loss and fading characteristics, number of measurements at each point, number of anchors and their position, and placement of training points. Representative simulations and experimentation are used to verify validity of the theoretical frameworks in realistic setups.