Search

We report a detailed quantum-chemical characterization of the electronic and optical properties of polyfluorene chains and compare them to those in copolymers containing alternating fluorene and benzothiadiazole or ethylenedioxythiophene units. The introduction of the comonomer can strongly modify the excitonic properties as well as the efficiency of charge- and energy-transfer processes. The choice of the comonomer is thus critical in targeting specific optical properties while maintaining good transport properties. [ABSTRACT FROM AUTHOR]

The charge hopping at the molecular level is explained by estimating at the quantum-chemical level the main parameters controlling the electron-transfer rate among interacting molecules. The results highlight that there is no direct relationship between the degree of spatial overlap among adjacent molecules and charge mobility.

Semiempirical Hartree-Fock techniques are applied to determine the molecular parameters governing the efficiency of photoinduced charge generation and recombination processes in donor/acceptor complexes involving a three-ring oligophenylenevinylene as donor and perylene bisimide as acceptor. The results have shown that dissociation pathways involving the lowest two Dexcited states contribute to the dynamics of the whole process and the rates are sensitive to the relative position of the donor and acceptor units.

Nanoresolved doping of polymeric semiconductors can overcome scaling limitations to create highly integrated flexible electronics, but remains a fundamental challenge due to isotropic diffusion of the dopants. Here we report a general methodology for achieving nanoscale ion-implantation-like electrochemical doping of polymeric semiconductors. This approach involves confining counterion electromigration within a glassy electrolyte composed of room-temperature ionic liquids and high-glass-transition-temperature insulating polymers. By precisely adjusting the electrolyte glass transition temperature (T g ) and the operating temperature (T), we create a highly localized electric field distribution and achieve anisotropic ion migration that is nearly vertical to the nanotip electrodes. The confined doping produces an excellent resolution of 56 nm with a lateral-extended doping length down to as little as 9.3 nm. We reveal a universal exponential dependence of the doping resolution on the temperature difference (T g  - T) that can be used to depict the doping resolution for almost infinite polymeric semiconductors. Moreover, we demonstrate its implications in a range of polymer electronic devices, including a 200% performance-enhanced organic transistor and a lateral p-n diode with seamless junction widths of <100 nm. Combined with a further demonstration in the scalability of the nanoscale doping, this concept may open up new opportunities for polymer-based nanoelectronics., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Conducting polymers are mixed ionic-electronic conductors that are emerging candidates for neuromorphic computing, bioelectronics and thermoelectrics. However, fundamental aspects of their many-body correlated electron-ion transport physics remain poorly understood. Here we show that in p-type organic electrochemical transistors it is possible to remove all of the electrons from the valence band and even access deeper bands without degradation. By adding a second, field-effect gate electrode, additional electrons or holes can be injected at set doping states. Under conditions where the counterions are unable to equilibrate in response to field-induced changes in the electronic carrier density, we observe surprising, non-equilibrium transport signatures that provide unique insights into the interaction-driven formation of a frozen, soft Coulomb gap in the density of states. Our work identifies new strategies for substantially enhancing the transport properties of conducting polymers by exploiting non-equilibrium states in the coupled system of electronic charges and counterions., (© 2024. The Author(s).)

A rapidly growing interest in organic bioelectronic applications has spurred the development of a wide variety of organic mixed ionic-electronic conductors. While these new mixed conductors have enabled the community to interface organic electronics with biological systems and efficiently transduce biological signals (ions) into electronic signals, the current materials selection does not offer sufficient selectivity towards specific ions of biological relevance without the use of auxiliary components such as ion-selective membranes. Here, we present the molecular design of an n-type (electron-transporting) perylene diimide semiconductor material decorated with pendant oligoether groups to facilitate interactions with cations such as Na+ and K+. Using the cyclic 15-crown-5 oligoether motif, we find that the resulting mixed conductor PDI-crown displays a strong dependence on the size of the electrolyte cation when tested in an organic electrochemical transistor configuration. In stark contrast to the low current response on the order of 1 µA observed with aqueous sodium chloride, a nearly 200-fold increase in current is observed with aqueous potassium chloride. We ascribe the high selectivity to extended molecular aggregation and therefore efficient charge transport in the presence of K+ due to a favourable sandwich-like structure between two adjacent 15-crown-5 motifs and the potassium ion., (© 2024 Wiley‐VCH GmbH.)

The charge-transport properties of conjugated polymers have been studied extensively for opto-electronic device applications. Some polymer semiconductors not only support the ambipolar transport of electrons and holes, but do so with comparable carrier mobilities. This opens the possibility of gaining deeper insight into the charge-transport physics of these complex materials via comparison between electron and hole dynamics while keeping other factors, such as polymer microstructure, equal. Here, we use field-induced electron spin resonance spectroscopy to compare the spin relaxation behavior of electron and hole polarons in three ambipolar conjugated polymers. Our experiments show unique relaxation regimes as a function of temperature for electrons and holes, whereby at lower temperatures electrons relax slower than holes, but at higher temperatures, in the so-called spin-shuttling regime, the trend is reversed. On the basis of theoretical simulations, we attribute this to differences in the delocalization of electron and hole wavefunctions and show that spin relaxation in the spin shuttling regimes provides a sensitive probe of the intimate coupling between charge and structural dynamics., (© 2024. The Author(s).)

Alternating copolymers are distinctly unique in comparison with other copolymers. Herein, an in-depth investigation of the oxyanionic ring-opening copolymerization of propylene oxide (PO) and allyl glycidyl ether (AGE) from benzyl alcohol (BnOH) activated with potassium acetate (KOAc) complexed by 18-crown-6 ether (18C6) is described. We demonstrate that the 18C6/KOAc complex is an efficient and benign catalytic system to promote copolymerization of both oxirane monomers, leading to well-defined polyethers with varied comonomer content and low dispersity values (Ɖ M  < 1.20). Kinetic analysis confirmed the controlled nature of the (co)polymerization process, and the determination of reactivity ratios revealed a quasi-alternating copolymerization profile, according to the Fineman-Ross method. The comparison between the quasi-alternating-type PO/AGE copolymerization and block or gradient copolymerization revealed significant differences, to confirm the different sequence incorporation in the different topological copolymers. These results highlight the great potential of 18C6/KOAc-mediated copolymerization process for the controlled sythesis of a series of copolymer topologies., (© 2023. The Author(s).)

Phenolamides are abundant specialized metabolites found in nature and consist of hydroxycinnamic acids mono- or polyconjugated with polyamines. Their participation in flower development is well-documented, and their presence in pollen raises the question of their role in pollen/pollinator interactions. The structural characterization of phenolamides is complicated by the presence of positional isomers and stereoisomers. Liquid chromatography coupled to tandem mass spectrometry in the positive ionization mode is becoming very popular in phenolamide structural characterization. However, collision-induced transamidation processes that cause the swapping of side chains have been detected, making it difficult to distinguish regioisomers with this technique. In the present report, we explore the dissociation processes undergone by the [M - H] - ions of spermidine-based phenolamides as model compounds. We describe two original competitive dissociation routes, namely, the phenolate and imidate pathways, to account for the observed fragmentation reactions undergone by collisional activated standard phenolamide anions. Whereas the phenolate pathway is regioselective at the central position for spermidine, the imidate pathway, requiring a deprotonated amide, only occurs at the extremities. Tandem mass spectrometry experiments on negatively charged phenolamide ions may then outperform their positive ionization mode counterparts for the distinction between phenolamide regioisomers and globally for the identification of phenolamides in natural extracts.

Organic semiconductors combine flexible tailoring of their optoelectronic properties by synthetic means with strong light-matter coupling, which is advantageous for organic electronic device applications. Although spatially selective deposition has been demonstrated, lateral patterning of organic films with simultaneous control of molecular and crystalline orientation is lacking as traditional lithography is not applicable. Here, a new patterning approach based on surface-localized F-centers (halide vacancies) generated by electron irradiation of alkali halides is presented, which allows structural control of molecular adlayers. Combining optical and atomic force microscopy, X-ray diffraction, and density functional theory (DFT) calculations, it is shown that dinaphthothienothiophene (DNTT) molecules adopt an upright orientation on pristine KCl surfaces, while the F-centers stabilize a recumbent orientation, and that these orientations are maintained in thicker films. This specific nucleation results also in different crystallographic morphologies, namely, densely packed islands and jagged fibers, each epitaxially aligned on the KCl surface. Spatially selective surface irradiation can also be used to create patterns of F-centers and thus laterally patterned DNTT films, which can be further transferred to any (including elastomer) substrate due to the water solubility of the alkali halide growth templates.

The charge transport of crystalline organic semiconductors is limited by dynamic disorder that tends to localize charges. It is the main hurdle to overcome in order to significantly increase charge carrier mobility. An innovative design that combines a chemical structure based on sulfur-rich thienoacene with a solid-state herringbone (HB) packing is proposed and the synthesis, physicochemical characterization, and charge transport properties of two new thienoacenes bearing a central tetrathienyl core fused with two external naphthyl rings: naphtho[2,3-b]thieno-[2''',3''':4'',5'']thieno[2″,3″:4',5']thieno[3',2'-b]naphtho[2,3-b]thiophene (DN4T) and naphtho[1,2-b]thieno-[2''',3''':4'',5'']thieno[2'',3'':4',5']thieno[3',2'-b]naphtho[1,2-b]thiophene are presented. Both compounds crystallize with a HB pattern structure and present transfer integrals ranging from 33 to 99 meV (for the former) within the HB plane of charge transport. Molecular dynamics simulations point toward an efficient resilience of the transfer integrals to the intermolecular sliding motion commonly responsible for strong variations of the electronic coupling in the crystal. Best device performances are reached with DN4T with hole mobility up to μ = 2.1 cm 2 V -1 s -1 in polycrystalline organic field effect transistors, showing the effectiveness of the electronic coupling enabled by the new aromatic core. These promising results pave the way to the design of high-performing materials based on this new thienoacene, notably through the introduction of alkyl side-chains., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Similar to biological macromolecules such as DNA and proteins, the precise control over the monomer position in sequence-defined polymers is of paramount importance for tuning their structures and properties toward achieving specific functions. Here, we apply molecular network analysis on three-dimensional structures issued from molecular dynamics simulations to decipher how the chain organization of trifunctional catalytic oligomers is influenced by the oligomer sequence and the length of oligo(ethylene oxide) spacers. Our findings demonstrate that the tuning of their primary structures is crucial for favoring cooperative interactions between the catalytic units and thus higher catalytic activities. This combined approach can assist in establishing structure-property relationships, leading to a more rational design of sequence-defined catalytic oligomers via computational chemistry.

The field of organic electronics has profited from the discovery of new conjugated semiconducting polymers that have molecular backbones which exhibit resilience to conformational fluctuations, accompanied by charge carrier mobilities that routinely cross the 1 cm 2 /Vs benchmark. One such polymer is indacenodithiophene-co-benzothiadiazole. Previously understood to be lacking in microstructural order, we show here direct evidence of nanosized domains of high order in its thin films. We also demonstrate that its device-based high-performance electrical and thermoelectric properties are not intrinsic but undergo rapid stabilization following a burst of ambient air exposure. The polymer's nanomechanical properties equilibrate on longer timescales owing to an orthogonal mechanism; the gradual sweating-out of residual low molecular weight solvent molecules from its surface. We snapshot the quasistatic temporal evolution of the electrical, thermoelectric and nanomechanical properties of this prototypical organic semiconductor and investigate the subtleties which play on competing timescales. Our study documents the untold and often overlooked story of a polymer device's dynamic evolution toward stability., (© 2022. The Author(s).)

Molecular doping-the use of redox-active small molecules as dopants for organic semiconductors-has seen a surge in research interest driven by emerging applications in sensing, bioelectronics, and thermoelectrics. However, molecular doping carries with it several intrinsic problems stemming directly from the redox-active character of these materials. A recent breakthrough was a doping technique based on ion-exchange, which separates the redox and charge compensation steps of the doping process. Here, the equilibrium and kinetics of ion exchange doping in a model system, poly(2,5-bis(3-alkylthiophen-2-yl)thieno(3,2-b)thiophene) (PBTTT) doped with FeCl 3 and an ionic liquid, is studied, reaching conductivities in excess of 1000 S cm -1 and ion exchange efficiencies above 99%. Several factors that enable such high performance, including the choice of acetonitrile as the doping solvent, which largely eliminates electrolyte association effects and dramatically increases the doping strength of FeCl 3 , are demonstrated. In this high ion exchange efficiency regime, a simple connection between electrochemical doping and ion exchange is illustrated, and it is shown that the performance and stability of highly doped PBTTT is ultimately limited by intrinsically poor stability at high redox potential., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Doped organic semiconductors are critical to emerging device applications, including thermoelectrics, bioelectronics, and neuromorphic computing devices. It is commonly assumed that low conductivities in these materials result primarily from charge trapping by the Coulomb potentials of the dopant counterions. Here, we present a combined experimental and theoretical study rebutting this belief. Using a newly developed doping technique based on ion exchange, we prepare highly doped films with several counterions of varying size and shape and characterize their carrier density, electrical conductivity, and paracrystalline disorder. In this uniquely large data set composed of several classes of high-mobility conjugated polymers, each doped with at least five different ions, we find electrical conductivity to be strongly correlated with paracrystalline disorder but poorly correlated with ionic size, suggesting that Coulomb traps do not limit transport. A general model for interacting electrons in highly doped polymers is proposed and carefully parametrized against atomistic calculations, enabling the calculation of electrical conductivity within the framework of transient localization theory. Theoretical calculations are in excellent agreement with experimental data, providing insights into the disorder-limited nature of charge transport and suggesting new strategies to further improve conductivities.

While the charge transport properties of organic semiconductors have been extensively studied over the recent years, the field of organics-based thermoelectrics is still limited by a lack of experimental data on thermal transport and of understanding of the associated structure-property relationships. To fill this gap, a comprehensive experimental and theoretical investigation of the lattice thermal conductivity in polycrystalline thin films of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (Cn-DNTT-Cn with n = 0, 8) semiconductors is reported. Strikingly, thermal conductivity appears to be much more isotropic than charge transport, which is confined to the 2D molecular layers. A direct comparison between experimental measurements (3ω-Völklein method) and theoretical estimations (approach-to-equilibrium molecular dynamics (AEMD) method) indicates that the in-plane thermal conductivity is strongly reduced in the presence of the long terminal alkyl chains. This evolution can be rationalized by the strong localization of the intermolecular vibrational modes in C8-DNTT-C8 in comparison to unsubstituted DNTT cores, as evidenced by a vibrational mode analysis. Combined with the enhanced charge transport properties of alkylated DNTT systems, this opens the possibility to decouple electron and phonon transport in these materials, which provides great potential for enhancing the thermoelectric figure of merit ZT., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

We investigate the charge transport physics of a previously unidentified class of electron-deficient conjugated polymers that do not contain any single bonds linking monomer units along the backbone but only double-bond linkages. Such polymers would be expected to behave as rigid rods, but little is known about their actual chain conformations and electronic structure. Here, we present a detailed study of the structural and charge transport properties of a family of four such polymers. By adopting a copolymer design, we achieve high electron mobilities up to 0.5 cm 2 V -1 s -1 Field-induced electron spin resonance measurements of charge dynamics provide evidence for relatively slow hopping over, however, long distances. Our work provides important insights into the factors that limit charge transport in this unique class of polymers and allows us to identify molecular design strategies for achieving even higher levels of performance., (Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

Charge transport in organic semiconductors is notoriously extremely sensitive to the presence of disorder, both internal and external (i.e., related to interactions with the dielectric layer), especially for n-type materials. Internal dynamic disorder stems from large thermal fluctuations both in intermolecular transfer integrals and (molecular) site energies in weakly interacting van der Waals solids and sources transient localization of the charge carriers. The molecular vibrations that drive transient localization typically operate at low-frequency (-1 ), which makes it difficult to assess them experimentally. Hitherto, this has prevented the identification of clear molecular design rules to control and reduce dynamic disorder. In addition, the disorder can also be external, being controlled by the gate insulator dielectric properties. Here a comprehensive study of charge transport in two closely related n-type molecular organic semiconductors using a combination of temperature-dependent inelastic neutron scattering and photoelectron spectroscopy corroborated by electrical measurements, theory, and simulations is reported. Unambiguous evidence that ad hoc molecular design enables the electron charge carriers to be freed from both internal and external disorder to ultimately reach band-like electron transport is provided., (© 2021 Wiley-VCH GmbH.)

We study by scanning thermal microscopy the nanoscale thermal conductance of films (40-400 nm thick) of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) and 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8). We demonstrate that the out-of-plane thermal conductivity is significant along the interlayer direction, larger for BTBT (0.63 ± 0.12 W m -1 K -1 ) compared to C8-BTBT-C8 (0.25 ± 0.13 W m -1 K -1 ). These results are supported by molecular dynamics calculations (approach to equilibrium molecular dynamics method) performed on the corresponding molecular crystals. The calculations point to significant thermal conductivity (3D-like) values along the 3 crystalline directions, with anisotropy factors between the crystalline directions below 1.8 for BTBT and below 2.8 for C8-BTBT-C8, in deep contrast with the charge transport properties featuring a two-dimensional character for these materials. In agreement with the experiments, the calculations yield larger values in BTBT compared to C8-BTBT-C8 (0.6-1.3 W m -1 K -1 versus 0.3-0.7 W m -1 K -1 , respectively). The weak thickness dependence of the nanoscale thermal resistance is in agreement with a simple analytical model.

The synthesis and photophysical study of two dinuclear copper(I) complexes bearing a 2-(1 H -imidazol-2-yl)pyrimidine bridging ligand are described. The tetrahedral coordination sphere of each copper center is completed through the use of a bulky bis(phosphine) ligand, either DPEphos or Xantphos. Temperature-dependent photophysical studies demonstrated emission through a combination of phosphorescence and thermally activated delayed fluorescence for both complexes, and an intense emission (Φ PL = 46%) was observed for a crystalline sample of one of the complexes reported. The photophysics of these two complexes is very sensitive to the environment. Two pseudopolymorphs of one of the dinuclear complexes were isolated, with distinct photophysics. The emission color of the crystals can be changed by grinding, and the differences in their photophysics before and after grinding are discussed.

The synthesis of 5-hydroxymethylfurfural (5-HMF) and 2-furfural (2-F) by hexoses and pentoses dehydration is considered as a promising path to produce materials from renewable resources. Low-transition-temperature mixtures (LTTMs) enable selective (>80%) dehydration of ketoses to furanic derivatives at moderate temperature (<100°C). However, aldoses dehydration generally requires higher temperatures and an isomerization catalyst. Chromium trichloride has been reported as one of the most efficient catalyst but its kinetic inertness could limit its performances below 100°C. Consequently, we investigate herein boric acid catalysis of aldoses dehydration in LTTMs based on choline halides and organic acids at 90°C. The limited activity of boric acid regarding furanic compounds synthesis (e.g., 5% 5-HMF yield and 23% glucose conversion after 1 h at 90°C with maleic acid) can be enhanced through tetrahydroxyborate esters (THBE) formation with α-hydroxyacids (e.g., 19% 5-HMF yield and 61% glucose conversion after 1 h at 90°C). THBE formation is however associated with H 3 O + generation favoring the appearance of side products (humins). We demonstrate that boric acid catalysis is not straightforward and that the use of THBE under moderate acidity should be further investigated to limit humins formation and promote furanic derivatives synthesis., (Copyright © 2020 Istasse, Lemaur, Debroux, Bockstal, Lazzaroni and Richel.)

The two-dimensional shape information yielded by ion mobility-mass spectrometry (IM-MS), usually reported as collision cross section (CCS), is often correlated to the underlying three-dimensional structures of the ions through computational chemistry. Here, we used theoretical approaches based on molecular mechanics (MM), molecular dynamics (MD), and density functional theory (DFT) to elucidate the structures of sodiated poly(ethoxy phosphate) polymer ions at different degrees of polymerization (DP) for three different charge states (1+, 2+, and 3+) by comparing computational results to experimentally obtained CCS values. From the calculated structures, we extract several key interaction distances which merge in clusters for all screened charge states and DPs, independent of the three-dimensional structures and the polymer ion structural rearrangements. These distances were also used to extract the minimum coordination numbers in poly(ethoxy phosphate) and to describe the preferred coordination geometries. When sodiated and protonated polymer ions are compared, the experimental CCS evolutions differ at small DP values and merge at higher DPs. We investigated in more depth this difference for two selected species, namely, [PEtP 5 + 2Na + ] 2+ and [PEtP 5 + 2H + ] 2+ . For the protonated ions, we explored the different protonation sites to extract three-dimensional structure candidates and rationalize the CCS behaviors.

Recent advances in molecular dynamics (MD) simulations have made it possible to examine the behavior of large charged droplets that contain analytes such as proteins or polymers, thereby providing insights into electrospray ionization (ESI) mechanisms. In the present study, we use this approach to investigate the release of polylactide (PLA) ions from water/acetonitrile ESI droplets. We found that cationized gaseous PLA ions can be formed via various competing pathways. Some MD runs showed extrusion and subsequent separation of polymer chains from the droplet, as envisioned by the chain ejection model (CEM). On other occasions the PLA chains remained inside the droplets and were released after solvent evaporation to dryness, consistent with the charge residue model (CRM). Following their release from ESI droplets, the nascent gaseous PLA ions were subjected to structural relaxation for several μs in vacuo. The MD conformations generated in this way for various PLA charge states compared favorably to experimental results obtained by ion mobility spectrometry-mass spectrometry (IMS-MS). The structures of all PLA ions evolved during relaxation in the gas phase. However, some macroion species retained features that resembled their nascent structures. For this subset of ions, the IMS-MS response appears to be strongly correlated with the ESI release mechanism (CEM vs. CRM). The former favored extended structures, whereas the latter preferentially generated compact conformers.

Peptoids are attractive substitutes for peptides in several research areas, especially when they adopt a helical structure. The chain-size evolution of the secondary structure of the widely studied ( S )- N -1-phenylethyl peptoids is here analyzed by means of the ion mobility mass spectrometry technique increasingly used as a powerful analytical tool and is further supported by theoretical modeling. We conclude that the helical shape of the peptoids prevailing in solution is lost in the gas phase by the need to screen the positive charge borne by the peptoid even though the collisional cross sections are close to the values expected for helical systems. We further illustrate that trend line analyses predicting molecular shapes from fits of the size evolution of cross sections can be very misleading since they critically depend on the range of polymerization degrees under study.

Self-healing polymeric materials that can spontaneously repair in a perpetual manner are highly appealing to address safety and restoration issues in different key applications. Usually built from reversible moieties that require to be activated using, for example, temperature, light, or pH changes, most of these self-healing materials rely on energy-demanding processes and/or external interventions to promote self-healing. In this work, we propose to exploit rapid dynamic exchanges between urea-based moieties and moisture as an alternative to promote local and spontaneous healing responses to damage using atmospheric moisture as an external stimulus. Non-hygroscopic urea-based polyurethanes with repetitive moisture-induced healing abilities at different degrees of humidity were thus designed through coupling reactions with non-hygroscopic polypropylene glycol and urea moieties. As supported by density functional theory (DFT) calculations coupled to local FTIR experimental studies, we furthermore established that the healing mechanism is ultimately related to the formation of water-urea clusters. Obviously, this work represents a platform for designing more advanced spontaneous self-healing materials beyond the present study, which hold promise for use in a wide range of technological applications.

We compare two small π-conjugated donor-bridge-acceptor organic molecules differing mainly in the number of thiophene rings in their bridging motifs (1 ring in 1; 2 rings in 2) with the aim of rationalizing the origin of the enhancement in the singlet exciton diffusion coefficient and length of 1 with respect to 2. By combining force field molecular dynamics and micro electrostatic schemes with time-dependent density functional theory and kinetic Monte Carlo simulations, we dissect the nature of the lowest electronic excitations in amorphous thin films of these molecules and model the transport of singlet excitons across their broadly disordered energy landscapes. In addition to a longer excited-state lifetime associated with a more pronounced intramolecular charge-transfer character, our calculations reveal that singlet excitons in 1 are capable of funneling through long-distance hopping percolation pathways, presumably as a result of the less anisotropic shape of the molecule, which favours long-range 3D transport.

Mass spectrometric techniques and more particularly collision-induced dissociation (CID) experiments represent a powerful method for the determination of the primary sequence of (bio)molecules. However, the knowledge of the ion fragmentation patterns say the dissociation reaction mechanisms is a prerequisite to reconstitute the sequence based on fragment ions. Previous papers proposed that protonated peptoids dissociate following an oxazolone-ring mechanism starting from the O-protonation species and leading to high mass Y sequence ions. Here we revisit this backbone cleavage mechanism by performing CID and ion mobility experiments, together with computational chemistry, on tailor-made peptoids. We demonstrated that the B/Y cleavages of collisionally activated O-protonated peptoids must involve the amide nitrogen protonated structures as the dissociating species, mimicking the CID behavior of protonated peptides. Upon the nucleophilic attack of the oxygen atom of the N-terminal adjacent carbonyl group on the carbonyl carbon atom of the protonated amide, the peptoid ions directly dissociate to form an ion-neutral complex associating an oxazolone ion to the neutral truncated peptoid residue. Dissociation of the ion/neutral complex predominantly produces Y ions due to the high proton affinity of the secondary amide function characteristic of truncated peptoids. Whereas the production of Y x ions from acetylated peptoids also involves the B/Y pathway, the observation of abundant Y x ions from non-acetylated peptoid ions is shown in the present study to arise from an A 1 -Y x mechanism. The consecutive and competitive characters of the A 1 -Y x and the B/Y mechanisms are also investigated by drift time-aligned CID experiments.

Organic semiconductors are usually polycyclic aromatic hydrocarbons and their analogs containing heteroatom substitution. Bioinspired materials chemistry of organic electronics promises new charge transport mechanism and specific molecular recognition with biomolecules. We discover organic semiconductors from deoxyribonucleic acid topoisomerase inhibitors, featuring conjugated backbone decorated with hydrogen-bonding moieties distinct from common organic semiconductors. Using ellipticine as a model compound, we find that hydrogen bonds not only guide polymorph assembly, but are also critical to forming efficient charge transport pathways along π-conjugated planes when at a low dihedral angle by shortening the end-to-end distance of adjacent π planes. In the π-π stacking and hydrogen-bonding directions, the intrinsic, short-range hole mobilities reach as high as 6.5 cm 2 V -1 s -1 and 4.2 cm 2 V -1 s -1 measured by microwave conductivity, and the long-range apparent hole mobilities are up to 1.3 × 10 -3 cm 2 V -1 s -1 and 0.4 × 10 -3 cm 2 V -1 s -1 measured in field-effect transistors. We further demonstrate printed transistor devices and chemical sensors as potential applications.

The molecular properties of [1]benzothieno[3,2-b][1]benzothiophene (BTBT) are vulnerable to structural modifications, which in turn are determined by the functionalization of the backbone. Hence versatile synthetic strategies are needed to discover the properties of this molecule. To address this, we have attempted heteroatom (oxygen) functionalization of BTBT by a concise and easily scalable synthesis. Fourfold hydroxy-substituted BTBT is the key intermediate, from which the compounds 2,3,7,8-bis(ethylenedioxy)-[1]benzothieno[3,2-b][1]benzothiophene and 2,3,7,8-bis(methylenedioxy)-[1]benzothieno[3,2-b][1]benzothiophene are synthesized. The difference in ether functionalities on the BTBT scaffold influences the ionisation potential values substantially. The crystal structure reveals the transformation of the herringbone motif in bare BTBT towards π-stacked columns in the newly synthesized derivatives. The results are further justified by the simulated HOMO levels of the model compound., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Efficient conjugated polymer optoelectronic devices benefit from concomitantly high luminescence and high charge carrier mobility. This is difficult to achieve, as interchain interactions, which are needed to ensure efficient charge transport, tend also to reduce radiative recombination and lead to solid-state quenching effects. Many studies detail strategies for reducing these interactions to increase luminescence, or modifying chain packing motifs to improve percolation charge transport; however achieving these properties together has proved elusive. Here, we show that properly designed amorphous donor-alt-acceptor conjugated polymers can circumvent this problem; combining a tuneable energy gap, fast radiative recombination rates and luminescence quantum efficiencies >15% with high carrier mobilities exceeding 2.4 cm 2 /Vs. We use photoluminescence from exciton states pinned to close-crossing points to study the interplay between mobility and luminescence. These materials show promise towards realising advanced optoelectronic devices based on conjugated polymers, including electrically-driven polymer lasers.

Several families of polymers possessing various end-groups are characterized by ion mobility mass spectrometry (IMMS). A significant contribution of the end-groups to the ion collision cross section (CCS) is observed, although their role is neglected in current fitting models described in literature. Comparing polymers prepared from different synthetic procedures might thus, be misleading with the current theoretical treatments. We show that this issue is alleviated by comparing the CCS of various polymer ions (polyesters and polyethers) as a function of the number of atoms in the macroion instead of the usual representation involving the degree of polymerization. Finally, we extract the atom number density from the spectra which gives us the possibility to evaluate the compaction of polymer ions, and by extension to discern isomeric polymers.

Unlike conventional thermally activated delayed fluorescence chromophores, boron-centered azatriangulene-like molecules combine a small excited-state singlet-triplet energy gap with high oscillator strengths and minor reorganization energies. Here, using highly correlated quantum-chemical calculations, we report this is driven by short-range reorganization of the electron density taking place upon electronic excitation of these multi-resonant structures. Based on this finding, we design a series of π-extended boron- and nitrogen-doped nanographenes as promising candidates for efficient thermally activated delayed fluorescence emitters with concomitantly decreased singlet-triplet energy gaps, improved oscillator strengths and core rigidity compared to previously reported structures, permitting both emission color purity and tunability across the visible spectrum.

Supramolecular mass spectrometry has emerged in the last decade as an orthogonal method to access, at the molecular level, the structures of noncovalent complexes extracted from the condensed phase to the rarefied gas phase using electrospray ionization. It is often considered that the soft nature of the ESI source confers to the method the capability to generate structural data comparable to those in the condensed phase. In the present paper, using the ammonium ion/cucurbituril combination as a model system, we investigate using ion mobility and computational chemistry the influence of the instrumental parameters on the topology, i.e., internal versus external association, of gaseous host/guest complex ions. MS and theoretical data are confronted to condensed phase data derived from nuclear magnetic resonance spectroscopy to assess whether the instrumental parameters can play an insidious role when trying to derive condensed phase data from mass spectrometry results. Graphical Abstract ᅟ.

Polyazaaromatic ruthenium(ii) complexes have been largely studied over the last decades, particularly in the scope of the biological applications, for the development of new diagnostic and phototherapeutic agents. In this context, Ru(ii) complexes able to react with biomolecules upon excitation are of great interest. Photo-oxidizing Ru(ii) complexes based on π-deficient ligands, such as bpz (2,2'-bypyrazine) and TAP (1,4,5,8-tetraazaphenathrene), were designed to allow a photo-induced electron transfer (PET) to take place in presence of biomolecules, thanks to their highly photo-oxidizing 3 MLCT state. This PET can occur from either a guanine moiety (G) or a tryptophan residue (Trp) to the excited complex and can ultimately lead to the formation of a photoadduct, i.e. the formation of a covalent bond between the Ru(ii) complex and the G or Trp moieties of a biomolecule. Here, we report the synthesis of two new photo-oxidizing Ru(ii) complexes, [Ru(TAP) 2 bpz] 2+ and [Ru(bpz) 2 TAP] 2+ , and the study of their photophysical and electrochemical properties. The influence of the structure of the ligand bpz/TAP on the photophysical and electrochemical properties of the four resulting complexes has been precisely determined thanks to the experimental and theoretical data obtained for to these new complexes.