Search

Maintaining the water quality is essential because of the limitation of drinking water bodies and their significant effects on life. Recently, much scientific interest has been attracted to the ecological condition assessment of water resources. Because of numerous health issues connected to water quality, the present work aimed to define the water quality status of Chahnimeh reservoirs, Sistan and Baluchistan province, Iran via the Iran Water Quality Index (IRWQISC), the National Sanitation Foundation Water Quality Index (NSFWQI), and human risk assessment. This cross-sectional descriptive work was accomplished in 4 seasons in 2020. The samples were gathered from 5 various points of Chahnimeh reservoirs. This study led to the results that the NSFWQI index was between 29.4 to 49.32, which showed “bad” quality, and the IRWQI index was between 19.27 and 39.23, which indicated “bad” and “relatively bad” quality. The best water quality based on both indexes was observed in the spring, and the worst was in the fall and summer. The highest value of HQ related to nitrate in drinking water was 1.60 in the group of children. However, according to the Monte Carlo simulation, HQ95% was estimated as 1.29. The Sobol sensitivity analysis of the first-order effect showed that daily water’s daily ingestion rate (IR) was the most sensitive input. In addition, the value of the second-order effect indicated that the interaction effect of concentration—ingestion rate was the most sensitive input parameter for HQ. Therefore, regular monitoring is necessary to ensure water safety for human consumption.

We utilize a new nanocomposite material to give a report about a new platform for wound dressing. It is worth mentioning synergistic mixing graphene quantum dots (as a type of organic dots (ODs)) and polyvinyl alcohol (PVA) are materials participating in fabrication of the nanocomposite mentioned. We brought staphylococcus aureus as a gram-positive bacterium and pseudomonas aeruginosa as a gram-negative bacterium into play to optimize their antibacterial activity. We evaluated Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) for OD/PVA nanocomposite. Our optimizations resulted as a persistent level against methicillin-resistant staphylococcus aureus (MRSA) in higher ratios of OD. Vitro studies and MTT assay were used for determination the optimum ratio of OD to PVA. We quantified burned wound infection models and the colony forming units CFUs in the burn wound which were in vivo studies by a standard colony counting method. Finally, the results show the mechanism of antibacterial activity of nanocomposite described as a contact mediated oxidative stress induction.

The slaughterhouse industry produces large amounts of highly polluted wastewater which needs to be treated before being discharged water. Thus, this work was conducted to investigate the feasibility of treating slaughterhouse wastewater using combined chemical coagulation and electro-Fenton methods. We studied the effect of process parameters such as polyaluminum chloride (PAC) concentration (25, 50, 75, 100 mg/L) for chemical coagulation and hydrogen peroxide concentration (500, 1000, 1500, 2000, 2500, 3000, 4000 mg/L), the pH of the solution (3, 5, 7, 10), and the reaction time (5, 10, 15, 30, 45, 75, 120 min) and the voltage (10, 20, 30, 40 V) on the removal of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total suspended solids (TSS), total Kjeldahl nitrogen (TKN), and fecal coliforms (FC). The optimum removal efficiency for the electro-Fenton process was obtained at PAC = 75 mg/L, reaction time = 75 min, pH = 3, H2O2 = 2500 mg/L, and V = 20 V, which resulted in the removal efficiency of 89.55% for COD, 88.88% for BOD, 91.27% for TSS, 69.23% for TKN, and 100% for FC. The findings demonstrated that combined chemical coagulation and electro-Fenton processes effectively and efficiently treat slaughterhouse wastewater. The results of this research can be used by competent authorities to increase the efficiency of slaughterhouse wastewater treatment and to protect the environment.

While a large body of literature has shown the health problems of illicit drug use, research is needed on how substance abuse impacts DNA damage and contaminants in blood, especially given Pb-contaminated opium. This pilot study aimed to evaluate the levels of lead (Pb), 8-hydroxy di-guanine (8-oxo-Gua), and malondialdehyde (MDA) in the blood serum of opium addicts and non-addict people. The current study is a case–control study with a cross-sectional design. A sample of 50 opium-addicted and non-addict adults were chosen for this study using convenience and random sampling methods. Participants were divided into two groups: addicts and non-addicts. The atomic absorption spectroscopy method was used to measure the quantity of Pb, and the Enzyme-Linked Immunosorbent Assay (ELISA) method was used to measure the amount of 8-oxo-Gua and MDA. The data were analyzed using an independent t-test. The results show that the amount of Pb in the blood serum of addicted women and men was higher than levels in non-addict men and women, for the study participants (p-value = 0.001). Blood levels were not significantly different between addicts and non-addicts for men or women for 8-oxo-Gua (p-value = 0.647 for women and p-value = 0.785 for men) and MDA (p-value = 0.867 for women and p-value = 0.995 for men). In general, addicts’ blood Pb levels were found to be substantially higher than those of normal non-addict persons in this pilot study. As a result, testing for blood Pb levels in addicts may be informative in instances when symptoms are inconclusive.

The existence of potentially toxic elements (PTEs) in water bodies has posed a menace to human health. Thus, water resources should be protected from PTEs, and their effect on the exposed population should be investigated. In the present investigation, the concentrations of PTEs such as lead (Pb), mercury (Hg), manganese (Mn), and iron(Fe) in the drinking water of Shiraz, Iran, were determined for the first time. In addition, hazard quotient, hazard index, cancer risk, and sensitivity analysis were applied to estimate the noncarcinogenic and carcinogenic impacts of Pb, Hg, Mn, and Fe on exposed children and adults through ingestion. The mean concentrations (µg/L) of Pb, Hg, Mn, and Fe were 0.36, 0.32, 2.28, and 8.72, respectively, in winter and 0.50, 0.20, 0.55, and 10.36, respectively, in summer. The results displayed that Fe concentration was more than the other PTEs. PTE concentrations were lower than the standard values of the Environment Protection Agency and World Health Organization. Values of the degree of contamination and heavy metal pollution index for lead, mercury, manganese, and iron were significantly low (

High concentrations of antibiotics have been identified in aquatic environments that have reduced water quality. These compounds are usually highly toxic, mutagenic, carcinogenic, and low biodegrad...

The application of a heterogeneous catalytic ozonation process with magnesium oxide (MgO) nanoparticles for the degradation of benzene in aqueous solutions was investigated by a Central Composite D...

Aims Resistin is secreted by adipose tissue and could be the link between diabetes and infertility. This study aimed to investigate the alteration of resistin following aerobic exercise training in diabetic rats and its possible interaction with sperm parameters. Methods & Materials In this experimental study, 30 male Wistar rats (age: 56 days, weight: 200-250g) were randomly divided equally into three groups of healthy control, diabetic control, and diabetic aerobic exercises. Diabetes was induced with a unique intraperitoneal injection (65 mg/kg body weight) of streptozotocin. Seven days after the injection and after 12 hours of fasting, the animals with blood glucose levels of ≥250 mg/dL were considered diabetic. Seven days after the induction of diabetes, the animals in the exercise group were subjected to progressive aerobic training (treadmill running for 1 h, 27 m/min, 5 d/wk). After 10 weeks of exercise, the sperm quality and resistin concentrations were measured. The obtained data were compared using Analysis of Variance (ANOVA) (P

Studies conducted in the last four years show conflicting findings on the role of the environment in the survival, stability, and transmission of SARS-CoV-2. Based on the current evidence, the factors that affect the severity of COVID-19 include host interaction, environmental stability, virus volume, stability, transmission, social interactions, and restriction measures. Moreover, the persistence of the virus depends on different environmental conditions, videlicet temperature, humidity, pH, salinity, and solar radiation. The outbreak of respiratory viruses is related mainly to temperature and humidity, and geographical locations (latitude). In SARS-CoV-2, mainly temperature and humidity seem to play a fundamental role. Moreover, studies have indicated that social health factors such as equitable health systems, hygiene, and underlying diseases have played a pivotal role in the incidence and outbreak of COVID-19. Therefore, addressing health issues associated with reducing SARS-CoV-2 outbreaks plays an essential role in global health. In contrast, the environmental stimuli of the COVID-19 outbreak are mainly unknown. Given the ongoing threat of the COVID-19 pandemic, it is important to understand the stimuli to respond quickly to emerging SARS-CoV-2 variants while implementing long-term and sustainable control strategies. This review discusses the role of environmental factors and health conditions in the outbreak of SARS-CoV-2.

Tetracycline (TCy) belongs to PPCPs is such an widely used antibacterial drug, which is discharged from urban wastewater treatment plants or agricultural efଂuents. Due to low metabolism, poor absorption, overuse, and misuse, TCy is considered as threat to environmental and its removal from waste-water is vital. In this research, a novel ionic liquid modiଁed magnetic activated carbon nanocomposite (IL@mAC) was synthesized, characterized, and the adsorption efficiency of IL@mAC for removal of TCy was investigated under different operational parameters of pH (3-11); dose of IL@mAC (0.01-0.1 g/50 mL); reaction time (30-240 min), and initial TCy concentration (50-1500 mg/L). The IL@mAC characterization was done using XRD, VSM, SEM-EDX, BET, and FTIR. Results of equilibrium experiment showed that the highest removal efficiency (~98%) was obtained using 0.06 g of IL@mAC in 135 min at pH 7 and temperature 303 K. Considering the correlation coefficients (R2) for different adsorption models, it can be deduced that adsorption of TCy onto IL@mAC is better followed by Langmuir (0.9985) in comparison to Freundlich (0.9322), and Temkin (0.9654) models. Furthermore, Langmuir adsorption capacity was observed to be 895.0 mg/g. The regeneration study showed that IL@mAC retained around 85% TCy adsorption efficiency after 6th cycle. Finally, the present study indicates that the IL@mAC is of a high applicability and has extremely high adsorbent capacity to remove TCy from water compared to most of other benchmark adsorbents reported in literature.

Tetracycline (TCy) belongs to PPCPs is such an widely used antibacterial drug, which is discharged from urban wastewater treatment plants or agricultural effluents. Due to low metabolism, poor absorption, overuse, and misuse, TCy is considered as threat to environmental and its removal from waste-water is vital. In this research, a novel ionic liquid modified magnetic activated carbon nanocomposite (IL@mAC) was synthesized, characterized, and the adsorption efficiency of IL@mAC for removal of TCy was investigated under different operational parameters of pH (3–11); dose of IL@mAC (0.01–0.1 g/50 mL); reaction time (30–240 min), and initial TCy concentration (50-1500 mg/L). The IL@mAC characterization was done using XRD, VSM, SEM-EDX, BET, and FTIR. Results of equilibrium experiment showed that the highest removal efficiency (~ 98%) was obtained using 0.06 g of IL@mAC in 135 min at pH 7 and temperature 303 K. Considering the correlation coefficients (R2) for different adsorption models, it can be deduced that adsorption of TCy onto IL@mAC is better followed by Langmuir (0.9977) in comparison to Freundlich (0.9412), and Temkin (0.9536) models. Furthermore, Langmuir adsorption capacity was observed to be 666.7 mg/g. The regeneration study showed that IL@mAC retained around 85% TCy adsorption efficiency after 6th cycle. Finally, the present study indicates that the IL@mAC is of a high applicability and has extremely high adsorbent capacity to remove TCy from water compared to most of other benchmark adsorbents reported in literature.

Background & objectives: In recent years, regarding the side effects of chemical drugs, the use of medicinal plants has increased due to their low side effects, low costs and effective compounds. The aim of this study was to investigate the anti-inflammatory, anti-nociceptive, and anti-pyretic effects of hydroalcoholic extract of Rosa canina L. fruit in male mice. Methods: In this experimental study, 120 male BALB/c mice weighing 23-30 g were used. In each test, the mice were divided into 5 groups (in each group, n=6), including control group, positive control and three experimental groups treated intraperitoneally with hydroalcoholic extract of Rosa canina L. fruit at doses of 100, 200 and 400 mg/kg respectively. The anti-inflammatory and antipyretic activities were measured using xylene-induced ear edema and brewer’s yeast-induced pyrexia tests, respectively. In addition, the antinociceptive activity was measured using the abdominal constrictions induced by acetic acid and formalin tests. The data were analyzed by SPSS statistical software and One Way ANOVA test. The level of significance was set at p

The release of dye containing effluent is a great threat to the world today. The purpose of this study is to optimize the removal of Reactive Blue 19 (RB19) dye from aqueous solutions using advanced oxidation process (AOP). Magnesium oxide nanoparticles (MgO NPs) and hydrogen peroxide (H2O2) were used as the catalyst and oxidizer, respectively. Central composite design (CCD) based on response surface methodology (RSM) was applied for optimization of the AOP process. The effects of pH (3–7), molar H2O2/MgO NPs ratio (1–3), initial concentration of RB19 (20–80 mg/L), and contact time (30–90 min) were investigated on the oxidation process. The CCD was applied to determine the interactive effects of the process parameters and their optimum conditions. One-way analysis of variance (ANOVA) was applied for statistical data analysis. A quadratic model was generated by the CCD to represent the AOP on RB19 degradation. The experimental values obtained for percentage RB19 decolorization were found to be very close to the predicted response values. Based on the design, optimum conditions of pH 3, contact time of 60 min, RB19 concentration of 80 mg/L and H2O2/MgO NPs molar ratio of 3 were obtained which resulted in 93.77% RB19 removal. High value for the coefficient of determination, R 2 (0.912) and adjusted R 2 (0.805) showed that the removal of RB19 dye using AOP can be described by the RSM. The ANOVA results showed that the quadratic model developed from the RSM was statistically significant for RB19 decolorization. From the study, it could be concluded that the RSM can be a useful tool for optimization and moderation of the process parameters to maximize RB19 dye removal from aqueous solutions and the advanced H2O2/MgO NPs oxidation process.

This study demonstrates the synthesis, characterization, and modeling of nickel ferrite nanocomposite, NiFe2O4 (NFC) as an adsorbent for the phenol contaminated aqueous environment. The characterization of the prepared NFC was performed with X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) techniques. The optimization and modeling of phenol removal using NFC was done through central composite design (CCD) and effective parameters of CCD were measured as input variables including the amount of NFC, pH, contact time and initial phenol concentration. The predicted results showed that the adsorption process using NFC as adsorbent had the maximum phenol removal (~99%) under predicted optimal conditions (pH = 7.67, NFC dosage = 0.15 g at room temperature), which also corresponded to the experimental values. In addition, a multilayer feed-forward artificial neural network (ANN) model was used to obtain a speculative phenol removal model. The network was trained for six replications after selection of the best neuron number for hidden layer. The value of MSE trained network was found to be 6.01718e-3 along with regression coefficient (R2 = 0.9934) that indicated satisfactory relationship. Isothermal modeling of phenol adsorption onto NFC was performed using well-known Temkin, Freundlich and Langmuir models and it was clear from the higher R2 value of 0.961 that the Langmuir model was significantly followed by experimental data. The maximum Langmuir adsorption capacity was found to be 274.72 mg/g at the optimal conditions. The obtained results prove that NFC could be an effective adsorbent for elimination of phenol contaminant from aqueous environment.

Introdution:Methyl paraben (MP) is an xsenoestrogen pollutant that is classified into preservatives due to its antibacterial properties. The aim of the present study was to investigate the effects of MP in female neonatal mice on puberty timing, estrus cycle, and ovarian follicle profile. Methods:In this experimental study, one-day-old Balb/c mice were randomly divided into 5 groups (n = 8), including the control, vehicle, and three groups with doses of 0.8, 4 and 20 mg/kg of methyl paraben, respectively. Subcutaneous injection was performed in the first 5 days after birth and once a day. The day of vaginal opening was considered as a sign of puberty and estrus cycle for one month. Then, the mice were sacrificed in 70 days; their serumand ovary were collected for studies of hormonal measurement and counting of follicles.Statistical analysis was performed using SPSS Inc., Chicago, IL; Version 18 and one-way analysis of variance was used for comparingthe groups. Results:The day of puberty onset advanced by 4 (p

Nitrate ions (NO3−) enter water sources through sewage and can cause (in high concentrations) methemoglobinemia, cancer of the lymphatic and blood systems. Therefore, the level of NO3− in water must be controlled and effectively reduced. In the present work, copper oxide nanoparticles (CuO NPs) were synthesized by chemical deposition method and their physicochemical properties have been determined by SEM, FTIR, XRD techniques. CuO NPs have been used as adsorbents to remove nitrate ions from synthetic effluents. The optimization of nitrate ions removal was performed using response surface modeling (RSM) with parameters (input): initial nitrate concentration (20, 45, 70 mg/L), CuO NPs concentration (0.03, 0.06, 0.08 g/L), pH (3, 7, 11) and reaction time (40, 80, 120 min). The optimum conditions found were 70 mg/L as nanoparticles dose, 0.08 g/L as NO3− concentration, pH=3, and 120 min contact time. The analysis of variance for this model confirmed that the model was fitted successfully (R2=0.9987, R2adj=0.9974). The adsorption fitted to Langmuir isotherm (R2L=0.9822) and second-order kinetics (R2s2=0.9999).

Even though we live in an age of modern technology and innovation, infectious diseases such as Malaria are among the biggest health challenges worldwide. The main drawbacks of conventional Malaria disease chemotherapy are developing multidrug resistance and targeting non-specific parasites, resulting in high dose requirements and subsequently intolerable toxicity. To combat this trend, research in nanotechnology and nanomedicine has begun to develop new biochemicals capable of incorporating drugs, contributing to Malaria disease treatment through diagnosis, control, and targeted delivery. Nanotechnology has emerged as a powerful tool to develop safe, cheap, and highly effective antiMalaria drug therapies. Metal nanoparticles fabricated via green and eco-friendly approaches have shown potential against mosquito-borne diseases. The plant extracts and extract-mediated nanoparticles have demonstrated significant bio-efficacy to combat Malaria vectors and offer a promising strategy for treating Malaria disease. Also, nano-bio sensors potential for diagnosing Malaria disease has become greater than before since they can be affordable, sensitive, and reliable applications that could substitute the conventional detection techniques in the future. Biosensors have improved the scope for Malaria diagnosis with novel biorecognition and transducer components, which allow the construction of affordable biosensor platforms with improved characteristics. Herein, we present recent studies on the plant extract-mediated fabrication of green nanoparticles and their effectiveness in treating Malaria-infected patients.

2,4-Dichlorophenol (2,4-DCP) is one of the seriously toxic chlorophenol compounds found in agricultural environments, in water disinfected by chlorine, and in outgoing effluents from the pulp and paper industries and paper manufacturing factories. This research studied the feasibility of using MgO nanoparticles (MgO-NPs) as a catalyst in the ozonation process for removing 2,4-DCP from aqueous environments under laboratory conditions. This study was conducted using a laboratory-scale semi-continuous reactor. It studied the effects of critical variables such as solution pH, ozonation time, dose of MgO-NPs and initial 2,4-DCP concentration. A statistical model of response surface model (RSM) was designed and utilized to obtain the optimum experimental conditions. Analysis of the data showed that initial concentration of 2,4-DCP and dose of MgO-NPs had the maximum effect on the response variable (percentage degradation of 2,4-DCP). Moreover, based on analysis of variance on the model, the optimum removal conditions were reaction time of 50 min, pH > 7, initial 2,4-DCP concentration of less than 50 mg/L, and an MgO-NPs dose of 0.3 mg/L. Under these optimum conditions, a removal efficiency of 99.99% was achieved. In addition, results indicated that catalytic ozonation in the presence of MgO-NPs was very efficient at removing 2,4-DCP from aqueous environments.

Background: Volatile organic compounds (VOCs) removal like toluene is an important concern for health of humans and the environment. Objectives: In this study, the efficiency of heterogeneous catalytic ozonation process (COP) with MgO nanoparticles for toluene degradation in aqueous solutions was investigated. Materials and Methods: Response surface methodology (RSM) using central composite design (CCD) was applied to study the interactions between critical operating factors and to find their optimum levels. Four independent factors namely pH, catalyst dosage, ozonation time and concentration of toluene were transformed to coded values and consequently a second order quadratic model was prepared for responses prediction. Results: The analysis of variance (ANOVA) of the toluene degradation by COP/MgO nanoparticles showed F-value of 19.53 for the quadratic model indicating that the prepared model is significant. The predicted result showed that maximum degradation of toluene (~99.99%) could be achieved at pH 12, MgO dose 0.5 g, ozonation time of 50 minutes and initial toluene concentration of 10 mg/l. The correlation coefficient (R2 = 0.9480) indicates a good correlation between the experimental and predicted values. Conclusions: According to the results, COP is an efficient and rapid method for removing of toluene from aqueous solutions.

Heavy metals pollution has become a more serious environmental problem in the last several decades as a result releasing toxic materials into the environment. Various techniques such as physical, chemical, biological, advanced oxidation and electrochemical processes were used for the treatment of domestic, industrial and agricultural effluents. The commonly used conventional biological treatments processes are not only time consuming but also need large operational area. Accordingly, it seems that these methods are not cost-effective for effluent containing toxic elements. Advanced oxidation techniques result in high treatment cost and are generally used to obtain high purity grade water. The chemical coagulation technique is slow and generates large amount of sludge. Electrocoagulation is an electrochemical technique with many applications. This process has recently attracted attention as a potential technique for treating industrial wastewater due to its versatility and environmental compatibility. This process has been applied for the treatment of many kinds of wastewater such as landfill leachate, restaurant, carwash, slaughterhouse, textile, laundry, tannery, petroleum refinery wastewater and for removal of bacteria, arsenic, fluoride, pesticides and heavy metals from aqueous environments. The objective of the present manuscript is to review the potential of electrocoagulation process for the treatment of domestic, industrial and agricultural effluents, especially removal of heavy metals from aqueous environments. About 100 published studies (1977–2016) are reviewed in this paper. It is evident from the literature survey articles that electrocoagulation are the most frequently studied for the treatment of heavy metal wastewater.

The management of dental solid waste continues to be a major challenge, particularly in most healthcare facilities of the developing world. In Iran, few studies on management of dental solid waste and its composition are available. An effort has been made through this study to evaluate the hazardous and infectious status of dental solid waste, keeping in mind its possible role in cross-infection chain. For this study, 123 private dental centres and 36 public dental centres were selected and the composition and generation rate of dental solid waste produced were measured. Dental solid waste was classified to four main categories: (i) domestic-type; (ii) potentially infectious; (iii) chemical and pharmaceutical; and (iv) toxic, which constituted 11.7, 80.3, 6.3, and 1.7%, respectively, of the total. Also, the results indicated that the dental solid waste per patient per day generation rate for total, domestic-type, potentially infectious, chemical and pharmaceutical, and toxic wastes were 169.9, 8.6, 153.3, 11.2, and 3.3 g/patient/d, respectively. Furthermore, the per day generation rates for total, domestic-type, potentially infectious, chemical and pharmaceutical, and toxic wastes were 194.5, 22.6, 156.1, 12.3, and 3.4 kg/d, respectively. According to findings of this study, for best management of dental waste it is suggested that source reduction, separation, reuse, and recycling programmes be implemented and each section of dental waste be collected and disposed of separately and in accordance with related criteria.

β-Aminocarbonyl compounds are selectively synthesized in high yields under extremely mild conditions via the condensation of aromatic aldehydes, aryl amines and ketones using catalytic amount of iron (III) phosphate under solvent free conditions. The use of readily available iron (III) phosphate as a reusable and recyclable catalyst makes this process quite simple, convenient, and environment-friendly., European Chemical Bulletin, Vol 2, No 10 (2013): European Chemical Bulletin