Search

This paper aims to derive the operational modes of a parallel double-window system that reduces cooling energy consumption and satisfies indoor comfort through natural ventilation. The parallel double-window system examined in this paper is a window system that could control indoor draft distribution and adjust the size of the opening depending on indoor and outdoor conditions. The system can be used in five ways (all close, out-open + in close, out-open+in open (tilt), out-open+in open (turn) and all open). This work verified the energy savings and indoor comfort of the existing mode experimentally, which were originally derived based on simple calculations at the time when the parallel double-window system was developed. A new operation mode, Alt 1, was derived, which addressed problems of the existing mode. In addition, in this work, the operation mode Alt 2 was derived, which simplified Alt 1 so that the actual occupant can use the system easily. By measuring these three operation modes and comparing the results with those of energy plus simulations, the work derived the amount of cooling energy savings and the level of indoor comfort through the use of an appropriate operation mode during inter-seasonal periods. Compared to when the natural ventilation operation mode was not used, cooling energy consumption was reduced by 60% when the operation mode was in use. The cooling temperature set point could have a significant impact on cooling energy consumption. [ABSTRACT FROM AUTHOR]

An adequate window system is one of the most important retrofit strategies for effective energy conservation of a building, because the U-value and solar heat gain coefficient of windows have enormous impact on the heating and cooling loads of buildings. Therefore, this paper presents methods for improving the energy efficiency of existing residences that have various window sizes and envelope insulations, through a window retrofit using optimal U-value and solar heat gain coefficient values. Furthermore, the window retrofit strategy has been standardized using analysis of the correlation between the properties of the retrofitted window and energy saving rates. The results show that the annual heating and cooling energy demand decreases by 7.9–16.7% when changing the U-value of the windows in a poorly insulated house, and that the relationship between the lower U-value and energy saving is strong for poorly insulated houses regardless of window size. However, for houses with better insulation and larger window sizes, the total energy usage decreases by 18.4–29.7% when the solar heat gain coefficient is lower, and the energy saving effect of the U-value decreases while that of the solar heat gain coefficient increases.Practical application: This study was focused on improving the energy efficiency of existing residences by applying retrofitting technology. By exploration of the contribution of the specific qualities of windows and the thermal envelope (insulation) system of buildings via simulation, it was determined that it is necessary to adjust the U-value and SHGC of retrofitted windows, in relation to the thermal performance and window-wall ratio of an existing residence, to achieve high energy efficiency. [ABSTRACT FROM AUTHOR]

Phase change materials (PCMs) absorb or release a large amount of heat when changing phase from solid to liquid or vice versa. When this characteristic of PCM is utilized, it can be employed effectively for energy conversation in buildings. To apply PCM to buildings, the thermal characteristics of PCM must be considered, such as the melting temperature and temperature range of the phase changes. In addition, the characteristics of the heating and cooling system, which influence the cycle of PCM absorbing and releasing heat, should also be taken into account. The purpose of this study was to provide guidelines for a method to apply PCM suitable for Korean residences, which use packaged air conditioners and floor radiant heating systems for cooling and heating, respectively. To accomplish this, the characteristics of cooling and heating energy reduction were analysed according to the application of PCM through simulation, taking into consideration various heating and cooling operating conditions. In addition, thermal conditions for PCM suitable for summer and winter were analysed through case studies, with the melting temperature and temperature range of phase changes as variables. [ABSTRACT FROM PUBLISHER]