Search

Introduction: Amorolfine 5% lacquer is an established topical treatment for fungal infection of the nails. The success of topical therapy for onychomycosis depends on whether the permeated drug concentration in the deep nail bed is retained above the effective antifungal minimum inhibitory concentration (MIC). We compared the penetration profile of amorolfine and a new topical formula of terbinafine in human mycotic toenails using matrix-assisted laser desorption ionization mass spectrometry imaging-Fourier transform ion cyclotron resonance (MALDI-FTICR) imaging., Methods: Amorolfine 5% lacquer and terbinafine 7.8% lacquer were applied to mycotic nails (n = 17); nail sections were prepared, and MALDI-FTICR analysis was performed. Based on the MICs of amorolfine and terbinafine needed to kill 90% (MIC 90 ) of Trichophyton rubrum, the fold differences between the MIC 90 and the antifungal concentrations in the nails (the multiplicity of the MIC 90 ) were calculated overall and for the keratin-unbound fractions., Results: Both amorolfine and terbinafine penetrated the entire thickness of the nail. The mean concentration across the entire nail section 3 h following terbinafine treatment was 1414 μg/g of tissue (equivalent to 4.9 mM) compared with 780 μg/g (2.5 mM) following amorolfine treatment (not significantly different; p = 0.878). The median multiplicity of the MIC 90 was significantly higher in amorolfine- than terbinafine-treated nails overall (191 vs. 48; p = 0.010) and for the keratin-unbound fractions only (7.4 vs. 0.8; p = 0.002)., Conclusion: In this ex vivo study, MALDI-FTICR demonstrated that, although amorolfine 5% and terbinafine 7.8% had similar distribution profiles, both penetrating from the surface to the nail bed, the concentration of amorolfine in the nail was significantly higher than that of terbinafine relative to their respective MIC 90 values. Clinical studies are required to determine whether these effects translate to a clinical difference in treatment success., (© 2024. The Author(s).)

Introduction: Onychomycosis is a fungal infection of the nails that can be challenging to treat. Here, matrix-assisted laser desorption ionization-Fourier transform ion cyclotron resonance (MALDI-FTICR) imaging was applied to the quantitative analysis of the penetration profile of the antifungal compound, amorolfine, in human mycotic toenails. The amorolfine profile was compared with those of three other antifungals, ciclopirox, naftifine, and tioconazole., Methods: Antifungal compounds (amorolfine 5% lacquer, ciclopirox 8% lacquer, naftifine 1% solution, and tioconazole 28% solution) were applied to mycotic nails (n = 42). Nail sections were prepared, and MALDI-FTICR analysis was performed on the sections at a spatial resolution of 70 μm to compare the distribution profiles. Based on the minimum inhibitory concentrations of the four test compounds needed to kill 90% (MIC 90 ) of the fungal organism, Trichophyton rubrum, the fold differences between the MIC 90 and the antifungal concentrations in the nails (termed the multiplicity of the MIC 90 ) were calculated for each., Results: The penetration profiles indicated higher concentrations of amorolfine and ciclopirox in the deeper layers of the nails 3 h after treatment, compared with naftifine and tioconazole. The mean concentrations across the entire nail sections at 3 h were significantly different among the four antifungals: amorolfine, 2.46 mM; ciclopirox, 0.95 mM; naftifine, 0.63 mM; and tioconazole, 1.36 mM (p = 0.016; n = 8 per compound). The median multiplicity of the MIC 90 at 3 h was 191-fold for amorolfine, tenfold for ciclopirox, 52-fold for naftifine, and 208-fold for tioconazole., Conclusion: In this study, MALDI-FTICR was successfully applied to the quantitative analysis of antifungal distribution in human mycotic nails. The findings suggest that amorolfine penetrates deeper layers of the nail and accumulates at concentrations far exceeding the MIC needed to exert antimycotic activity., (© 2024. The Author(s).)

Background: Lactic acid is a common active ingredient in many topical skincare products; however, measuring its delivery into the skin is challenging due to the presence of a large level of endogenous lactic acid. In this study, matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) was used to quantitatively and qualitatively measure the delivery of lactic acid into the skin from a range of topical skincare products., Materials and Methods: Porcine skin samples were treated with various skincare products containing lactic acid. After 24 h, skin samples were sectioned and treated via H&E staining or prepared for MALDI-MSI using chemical derivatization. Samples were then analyzed by MALDI-MSI imaging to obtain lactic acid distribution in the entire skin section., Results: Due to the high level of endogenous lactic acid in the skin, a "triple isotope" of lactic acid (L-Lactic acid- 13 C 3 ), was needed to provide full resolution from the skin's background signal with MALDI-MSI. With this approach, the topically delivered lactic acid could be quantitatively and qualitatively analyzed from a variety of skincare products., Conclusions: The combination of L-Lactic acid- 13 C 3 and MALDI-MSI was successfully used to quantitatively and qualitatively measure the topical delivery of lactic acid from a variety of skincare products. This approach could be used in future work to better understand the mode of action of lactic acid as an active ingredient in skincare products., (© 2023 Colgate Palmolive and The Authors. Skin Research and Technology published by John Wiley & Sons Ltd.)

As tumors are very heterogeneous, investigating the penetration and concentration of an anticancer drug in different histological regions of a tumor is key to evaluate the efficacy, to improve the pharmacokinetics/pharmacodynamics (PK/PD) relationship evaluation, and to confirm the adequacy of the dose regimen. Quantitative mass spectrometry imaging (QMSI) allows for the determination of the tissue distribution of drugs, metabolites, and biomarkers to support quick and precise evaluation of drug efficacy and safety in a single experiment. QMSI was applied in a preoperative window-of-opportunity (WoO) study of the inhibitor of apoptosis protein antagonist xevinapant (Debio 1143) in patients with resectable squamous cell carcinoma of the head and neck (SCCHN). Tumors were isolated, immediately snap-frozen, and sectioned, and then, the molecular distribution of the drug was generated by matrix-assisted laser desorption ionization (MALDI) imaging. Additionally, the different histological regions (tumor, epithelium, salivary glands, muscle, nerve, and blood vessels) were identified on stained sections adjacent to the ones used for QMSI, leading to a specific quantification integrating the biological characterization of the tumor heterogeneity. This innovative approach allowed one to highlight the high affinity of xevinapant for the tumor tissues.

Hyaluronic acid (HA) is a major component of the skin, contributing to tissue hydration and biomechanical properties. As HA content in the skin decreases with age, formulas containing HA are widely used in cosmetics and HA injections in aesthetic procedures to reduce the signs of aging. To prove the beneficial effects of these treatments, efficient quantification of HA levels in the skin is necessary, but remains difficult. A new analytical method has been developed based on matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) to quantify HA content in cross sections of human skin explants. A standardized and reproducible chemical entity (3 dimeric motifs or 6-mer) quantifiable by MALDI-MSI was produced by enzymatic hydrolysis using a specific hyaluronidase (H1136) in HA solution. This enzymatic digestion was carried out on skin sections before laser desorption, enabling the detection of HA. Histological coloration allowed us to localize the epidermis and the dermis on skin sections and, by comparison with the MALDI molecular image, to calculate the relative HA concentrations in these tissue areas. Skin explants were treated topically using a formula containing HA or its placebo, and the HA distribution profiles were compared with those obtained from untreated explants. A significant increase in HA was shown in each skin layer following topical application of the formula containing HA versus placebo and untreated samples (average of 126±40% and 92±40%, respectively). The MALDI-MSI technique enabled the quantification and localization of all HA macromolecules (endogenous and exogenous) on skin sections and could be useful for determining the efficacy of new cosmetic products designed to fight the signs of aging., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)

Mycosis fungoides (MF) is a subtype of CTCL with a low incidence and high medical need for novel treatments. The objective of this randomized, placebo-controlled, double-blinded, first-in-human study was to evaluate safety, efficacy, cutaneous and systemic pharmacokinetics (PK) of topical bimiralisib in healthy volunteers (HVs) and MF patients. In this trial, a total of 6 HVs and 19 early-stage MF patients were treated with 2.0% bimiralisib gel and/or placebo. Drug efficacy was assessed by the Composite Assessment of Index Lesion Severity (CAILS) score, supported by objective measuring methods to quantify lesion severity. PK blood samples were collected frequently and cutaneous PK was investigated in skin punch biopsies on the last day of treatment. Local distribution of bimiralisib in HVs showed a mean exposure of 2.54 µg/g in the epidermis. A systemic concentration was observed after application of a target dose of 2 mg/cm 2 on 400 cm 2 , with a mean C avg of 0.96 ng/mL. Systemic exposure of bimiralisib was reached in all treated MF patients, and normalized plasma concentrations showed a 144% increased exposure compared to HVs, with an observed mean C avg of 4.49 ng/mL and a mean cutaneous concentration of 5.3 µg/g. No difference in CAILS or objective lesion severity quantification upon 42 days of once-daily treatment was observed in the MF patient group. In general, the treatment was well tolerated in terms of local reactions as well as systemic adverse events. In conclusion, we showed that topical bimiralisib treatment leads to (i) meaningful cutaneous drug levels and (ii) well-tolerated systemic drug exposure in MF patients and (iii) a lack of clinical efficacy, in need of further exploration due to numerous unknown factors, before depreciation of topical bimiralisib as a novel therapeutic drug for CTCLs.

Hepatocellular carcinoma is the most frequent primary liver cancer. Macroautophagy/autophagy inhibitors have been extensively studied in cancer but, to date, none has reached efficacy in clinical trials. In this study, we demonstrated that GNS561, a new autophagy inhibitor, whose anticancer activity was previously linked to lysosomal cell death, displayed high liver tropism and potent antitumor activity against a panel of human cancer cell lines and in two hepatocellular carcinoma in vivo models. We showed that due to its lysosomotropic properties, GNS561 could reach and specifically inhibited its enzyme target, PPT1 (palmitoyl-protein thioesterase 1), resulting in lysosomal unbound Zn 2+ accumulation, impairment of cathepsin activity, blockage of autophagic flux, altered location of MTOR (mechanistic target of rapamycin kinase), lysosomal membrane permeabilization, caspase activation and cell death. Accordingly, GNS561, for which a global phase 1b clinical trial in liver cancers was just successfully achieved, represents a promising new drug candidate and a hopeful therapeutic strategy in cancer treatment. Abbreviations : ANXA5:annexin A5; ATCC: American type culture collection; BafA1: bafilomycin A 1 ; BSA: bovine serum albumin; CASP3: caspase 3; CASP7: caspase 7; CASP8: caspase 8; CCND1: cyclin D1; CTSB: cathepsin B; CTSD: cathepsin D; CTSL: cathepsin L; CQ: chloroquine; iCCA: intrahepatic cholangiocarcinoma; DEN: diethylnitrosamine; DMEM: Dulbelcco's modified Eagle medium; FBS: fetal bovine serum; FITC: fluorescein isothiocyanate; GAPDH: glyceraldehyde-3-phosphate dehydrogenase; HCC: hepatocellular carcinoma; HCQ: hydroxychloroquine; HDSF: hexadecylsulfonylfluoride; IC 50 : mean half-maximal inhibitory concentration; LAMP: lysosomal associated membrane protein; LC3-II: phosphatidylethanolamine-conjugated form of MAP1LC3; LMP: lysosomal membrane permeabilization; MALDI: matrix assisted laser desorption ionization; MAP1LC3/LC3: microtubule associated protein 1 light chain 3; MKI67: marker of proliferation Ki-67; MTOR: mechanistic target of rapamycin kinase; MRI: magnetic resonance imaging; NH 4 Cl: ammonium chloride; NtBuHA: N-tert-butylhydroxylamine; PARP: poly(ADP-ribose) polymerase; PBS: phosphate-buffered saline; PPT1: palmitoyl-protein thioesterase 1; SD: standard deviation; SEM: standard error mean; vs, versus; Zn 2+ : zinc ion; Z-Phe: Z-Phe-Tyt(tBu)-diazomethylketone; Z-VAD-FMK: carbobenzoxy-valyl-alanyl-aspartyl-[O-methyl]- fluoromethylketone.

Generation of skin distribution profiles and reliable determination of drug molecule concentration in the target region are crucial during the development process of topical products for treatment of skin diseases like psoriasis and atopic dermatitis. Imaging techniques like mass spectrometric imaging (MSI) offer sufficient spatial resolution to generate meaningful distribution profiles of a drug molecule across a skin section. In this study, we use matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) to generate quantitative skin distribution profiles based on tissue extinction coefficient (TEC) determinations of four different molecules in cross sections of human skin explants after topical administration. The four drug molecules: roflumilast, tofacitinib, ruxolitinib, and LEO 29102 have different physicochemical properties. In addition, tofacitinib was administrated in two different formulations. The study reveals that with MALDI-MSI, we were able to observe differences in penetration profiles for both the four drug molecules and the two formulations and thereby demonstrate its applicability as a screening tool when developing a topical drug product. Furthermore, the study reveals that the sensitivity of the MALDI-MSI techniques appears to be inversely correlated to the drug molecules' ability to bind to the surrounding tissues, which can be estimated by their Log D values. Graphical abstract.

In order to quantify small molecules at the early stage of drug discovery, we developed a quantitation approach based on mass spectrometry imaging (MSI) using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) without the use of a labeled compound. We describe a method intended to respond to the main challenges encountered in quantification through MALDI imaging dedicated to whole-body or single heterogeneous organ samples (brain, eye, liver). These include the high dependence of the detected signal on the matrix deposition, the MALDI ionization yield of specific target molecules, and lastly, the ion suppression effect on the tissue. To address these challenges, we based our approach on the use of a normalization factor called the TEC (Tissue Extinction Coefficient). This factor takes into account the ion suppression effect that is both tissue- and drug-specific. Through this protocol, the amount of drug per gram of tissue was determined, which in turn, was compared with other analytical techniques such as Liquid Chromatography-Mass spectrometry (LC-MS/MS)., (Copyright © 2012 Elsevier B.V. All rights reserved.)

We investigated in a rabbit model, the eye distribution of topically instilled benzalkonium_(BAK) chloride a commonly used preservative in eye drops using mass spectrometry imaging. Three groups of three New Zealand rabbits each were used: a control one without instillation, one receiving 0.01%BAK twice a day for 5 months and one with 0.2%BAK one drop a day for 1 month. After sacrifice, eyes were embedded and frozen in tragacanth gum. Serial cryosections were alternately deposited on glass slides for histological (hematoxylin-eosin staining) and immunohistological controls (CD45, RLA-DR and vimentin for inflammatory cell infiltration as well as vimentin for Müller glial cell activation) and ITO or stainless steel plates for MSI experiments using Matrix-assisted laser desorption ionization time-of-flight. The MSI results were confirmed by a round-robin study on several adjacent sections conducted in two different laboratories using different sample preparation methods, mass spectrometers and data analysis softwares. BAK was shown to penetrate healthy eyes even after a short duration and was not only detected on the ocular surface structures, but also in deeper tissues, especially in sensitive areas involved in glaucoma pathophysiology, such as the trabecular meshwork and the optic nerve areas, as confirmed by images with histological stainings. CD45-, RLA-DR- and vimentin-positive cells increased in treated eyes. Vimentin was found only in the inner layer of retina in normal eyes and increased in all retinal layers in treated eyes, confirming an activation response to a cell stress. This ocular toxicological study confirms the presence of BAK preservative in ocular surface structures as well as in deeper structures involved in glaucoma disease. The inflammatory cell infiltration and Müller glial cell activation confirmed the deleterious effect of BAK. Although these results were obtained in animals, they highlight the importance of the safety-first principle for the treatment of glaucoma patients.

Previously, MS was often used to analyze the composition and structure of biological molecules present in solutions. Today, technology developments enable the application of MS for the analysis of localized biomolecules on biological tissue surfaces. This technique is called MS imaging. MALDI imaging MS is a technique whereby thousands of compounds present in a tissue section are detected simultaneously without labeling. Although initially used for the detection of biomolecules such as peptides and proteins, this technology is also used today for drug detection. These characteristics make MS imaging an ideal technology that is perfectly adapted for ADME (absorption, distribution, metabolism and excretion) studies. In fact, this technology facilitates the tracking of one or several administered drugs, as well as the metabolites that result from their assimilations. In this article, we will present the various possibilities that MALDI imaging MS approaches have to offer for the study of drugs and their metabolites using MS, MS/MS, FAST-SRM and MRM modes. In this context, we investigate two studies: the distribution of olanzapine in the kidney and the overall distribution of BDM31343 in mouse whole-body section.