Search

Lithium (Li)-rich transition metal oxide cathodes with a cation disordered rock salt structure (DRX) are increasingly gaining popularity for advanced Li batteries as they offer high capacity and cost benefits over the commonly used layered Li transition metal oxide cathodes. However, the performance of DRX cathodes and their applications are limited by severe side reactions between the cathode and the state-of-the-art carbonate-based electrolytes at high voltage of 4.8 V, transition metal dissolution, and structural instability of the cathode particles. In this work, an advanced localized high-concentration electrolyte (LHCE) is developed to form a stable cathode-electrolyte interphase and mitigate structural instability of the Li1.13Mn0.66Ti0.21O2 (LMTO) DRX during electrochemical cycling. Li||LMTO half cells with the LHCE demonstrate increased capacity, cycling stability, and superior rate capability compared with cells containing a conventional carbonate electrolyte. For instance, the Li||LMTO cells cycled in LHCE show a higher initial capacity of 205.2 mAh g−1 and a better capacity retention of 72.5% after 200 cycles at a current density of 20 mA g−1 than those with the conventional electrolyte (initial capacity of 187.7 mAh g−1 and capacity retention of 19.9%). This work paves the way to the development of practical DRX cathode-based high-energy Li batteries.

Protonation of oxide cathodes triggers surface transition metal dissolution and accelerates the performance degradation of Li-ion batteries. While strategies are developed to improve cathode material surface stability, little is known about the effects of protonation on bulk phase transitions in these cathode materials or their sodium-ion battery counterparts. Here, using NaNiO2 in electrolytes with different proton-generating levels as model systems, a holistic picture of the effect of incorporated protons is presented. Protonation of lattice oxygens stimulate transition metal migration to the alkaline layer and accelerates layered-rock-salt phase transition, which leads to bulk structure disintegration and anisotropic surface reconstruction layers formation. A cathode that undergoes severe protonation reactions attains a porous architecture corresponding to its multifold performance fade. This work reveals that interactions between electrolyte and cathode that result in protonation can dominate the structural reversibility/stability of bulk cathodes, and the insight sheds light for the development of future batteries.

Cation-disordered rock-salt cathodes (DRX) are promising materials that could deliver high capacities (>250 mAh g-1) with Earth abundant elements and materials. However, their electrochemical performances, other than the capacity, should be improved to be competitive cathodes, and many strategies have been introduced to enhance DRXs. Fluorination has been shown to inhibit oxygen loss and increase power density. Nevertheless, fluorinated cation-disordered rock-salts still suffer from rapid material deterioration and low scalability which limit their practical applications. This mini-review highlights the key challenges for the commercialization of fluorinated cation-disordered rock-salts, discusses the underlying reasons behind material failure and proposes future development directions.

Exploring materials that simultaneously possess high conductivity and electrochemical stability is critical for various energy-conversion applications. In this study, our combined computations and experiments suggest the Mg-Ti-O chemical space for novel ternary oxide compounds offering high electrical conductivity and corrosion stability in acidic conditions to be potentially used as catalyst supporter of polymer electrolyte membrane fuel cells. High electrical conductivity (6.09 × 10−1 S cm−1) is achieved at room temperature by tuning the chemical composition of Mg1−xTi2+xO5 while still maintaining good corrosion stability (1.2 × 10−4 mA cm−2 after six days) in acidic conditions. Furthermore, we discover that a reducing gas environment during the synthesis increases the Ti solubility in Mg1−xTi2+xO5 with a reduced valence state of Ti, thus resulting in high conductivity.

Na-ion batteries (SIBs) require novel anode materials which have high ion storage capability and low working voltage to make SIBs competitive compared to Li-ion batteries (LIBs). From this perspective, we present the origin of improved electrochemical performances of phosphate doped hard carbon (P-HC) which can meet the two requirements mentioned above through combining experiment with the calculations of atomic/electronic structures. We disclosed that the capacity enhancement is accompanied by the changed voltage profile, which results from the introduced phosphate functional groups. The emerged redox peak turned out to be generated by the electrochemical reaction of Na ions near the phosphate-carbon environment. First-principles calculations elaborated that the phosphate introduction here generates electron holes near the Fermi level that is generally considered as evidence of p-type semiconductors to improve electronic conductivity. This expectation has been proven by comparatively measuring the electrical conductivities of pristine hard carbon and P-HC. A close investigation into charge distribution indicated that the electron hole is generated mainly by the higher reducibility of the doped phosphate than the surrounding carbon atoms in P-HC. This discovery well explains the underlying principles for the enhanced electrochemical performance of P-HC, thereby showing a way to design highly functional hard carbon structures toward higher capacity with Na ions.

Utilizing both cationic and anionic oxygen redox reactions is regarded as an important approach to exploit high-capacity layered cathode materials with earth abundant elements. It has been popular strategies to effectively elevate the oxygen redox activities by Li-doping to introduce unhybridized O 2p orbitals in Nax MnO2 -based chemistries or enabling high covalency transition metals in P2-Na0.66 Mnx TM1- x O2 (TM = Fe, Cu, Ni) materials. Here, the effect of Li doping on regulating the oxygen redox activities P2-structured Na0.66 Ni0.25 Mn0.75 O2 materials is investigated. Systematic X-ray characterizations and ab initio simulations have shown that the doped Li has uncommon behavior in modulating the density of states of the neighboring Ni, Mn, and O, leading to the suppression of the existing oxygen and Mn redox reactivities and the promotion of the Ni redox. The findings provide a complementary scenario to current oxygen redox mechanisms and shed lights on developing new routes for high-performance cathodes.

In high-capacity layered oxide cathode materials, utilization of lattice oxygen as a redox center is considered to be one of the most promising approaches to overcome the capacity limitation set by conventional transition metal redox centers. However, rapid material degradation is often associated with oxygen oxidation, leading to formidable challenges in utilizing oxygen redox. Further mechanistic understanding of the oxygen activities thus becomes critical to better control oxygen redox reactions. This review summarizes recent advances for investigating oxygen redox reactions in cathode materials from a multiscale perspective, i.e., from the atomistic level to the microstructure regime. First the mechanistic aspects of oxygen redox and the consequences of this reaction on various electrode degradation pathways during battery operation (e.g., oxygen loss, transition metal migration, irreversible phase transition), relating structural changes at the crystallographic scale to those at the macro scale, are discussed. Then recent developments based on atomic and microstructure modifications that are promising for improving the reversibility of oxygen redox reaction or mitigating the harmful processes arising from oxidation of the oxygen centers under high operating voltage are recounted. The analysis is concluded with a commentary on further research directions toward optimizing the oxygen activity for high-capacity charge storage.

Layered transition-metal oxides have attracted intensive interest for cathode materials of sodium-ion batteries. However, they are hindered by the limited capacity and inferior phase transition due to the gliding of transition-metal layers upon Na+ extraction and insertion in the cathode materials. Here, we report that the large-sized K+ is riveted in the prismatic Na+ sites of P2-Na0.612K0.056MnO2 to enable more thermodynamically favorable Na+ vacancies. The Mn-O bonds are reinforced to reduce phase transition during charge and discharge. 0.901 Na+ per formula are reversibly extracted and inserted, in which only the two-phase transition of P2 ↔ P'2 occurs at low voltages. It exhibits the highest specific capacity of 240.5 mAh g-1 and energy density of 654 Wh kg-1 based on the redox of Mn3+/Mn4+, and a capacity retention of 98.2% after 100 cycles. This investigation will shed lights on the tuneable chemical environments of transition-metal oxides for advanced cathode materials and promote the development of sodium-ion batteries.

Redox reactions of oxygen have been considered critical in controlling the electrochemical properties of lithium-excessive layered-oxide electrodes. However, conventional electrode materials without overlithiation remain the most practical. Typically, cationic redox reactions are believed to dominate the electrochemical processes in conventional electrodes. Herein, we show unambiguous evidence of reversible anionic redox reactions in LiNi1/3 Co1/3 Mn1/3 O2 . The typical involvement of oxygen through hybridization with transition metals is discussed, as well as the intrinsic oxygen redox process at high potentials, which is 75 % reversible during initial cycling and 63 % retained after 10 cycles. Our results clarify the reaction mechanism at high potentials in conventional layered electrodes involving both cationic and anionic reactions and indicate the potential of utilizing reversible oxygen redox reactions in conventional layered oxides for high-capacity lithium-ion batteries.

Redox reactions of oxygen have been considered critical in controlling the electrochemical properties of lithium-excessive layered-oxide electrodes. However, conventional electrode materials without overlithiation remain the most practical. Typically, cationic redox reactions are believed to dominate the electrochemical processes in conventional electrodes. Herein, we show unambiguous evidence of reversible anionic redox reactions in LiNi1/3 Co1/3 Mn1/3 O2 . The typical involvement of oxygen through hybridization with transition metals is discussed, as well as the intrinsic oxygen redox process at high potentials, which is 75 % reversible during initial cycling and 63 % retained after 10 cycles. Our results clarify the reaction mechanism at high potentials in conventional layered electrodes involving both cationic and anionic reactions and indicate the potential of utilizing reversible oxygen redox reactions in conventional layered oxides for high-capacity lithium-ion batteries.

Pseudocapacitors contributed by surface redox reactions can attain higher capacitances than electrical double-layer capacitors. However, their energy density cannot be fully released when the capacitance and kinetics of the positive and negative electrodes are not balanced. Herein, activated Mo, F-doped MnO2 (A-MMO) with surface cation vacancies (CVAs) and VOx coordinated with amphoteric N and P species (N,P–VOx) are designed with comparable capacitances even at high rates. For A-MMO, surface Mn and Mo vacancies generated from an Ostwald ripening process can lower the coordination number of Mn, modulate electronic structure and buffer Na+ insertion/extraction strains. Na+ ions can strongly interact with unsaturated [O] dangling bonds nearby CVAs, allowing fast redox kinetics. For N,P–VOx, the electron-donating property of P to adjacent N atoms can suppress the attraction of electrons by N atoms from V atoms in the V–N bond, which allows high electron density around V and facilitates Na+ adsorption. Theoretical calculations, ex situ Raman and XRD results reveal the critical roles of CVAs and amphoteric species in regulating the electronic structure and electrochemical activity of pseudocapacitive materials. Different from using ultrahigh mass loading in the literature, the assembled A-MMO//N,P–VOx pseudocapacitor with moderate mass loading achieves a high energy density of 15.82 mW h cm−3, superior mechanical flexibility, and stable energy output under deformations. [ABSTRACT FROM AUTHOR]

The O3‐type Li‐rich layered oxides (LLOs) are approaching industrial applications as high‐energy cathode materials for Li‐ion batteries (LIBs), however, they suffer from rapid performance decay associated with oxygen activities. The interplay between surface and bulk transformations in LLOs, especially the electrochemical behaviors of oxygen anions, remains elusive. Here, by regulating the surface of an O3‐type LLO (Li1.13Mn0.517Ni0.256Co0.097O2) using an all‐fluorinated electrolyte, an enhanced capacity retention from 57.4% to 85.3% and a suppressed voltage decay from 1.34 mV cycle−1 to 0.58 mV cycle−1 within 300 cycles are realized. The performance enhancement is attributed to the thin, uniform, robust, and compact F‐rich cathode‐electrolyte interphase (CEI), which suppresses various types of oxygen‐related surface degradation and, more importantly, stabilizes the bulk oxygen reactions. Through the combined experimental and theoretical studies, this work directly reveals the intriguing association between the surface and bulk oxygen activities and demonstrates that optimizing the interphase is an effective approach for improving the stability of high‐energy battery cathodes involving oxygen redox reactions. [ABSTRACT FROM AUTHOR]