Search

Voltage control of ferromagnetism on the nanometer scale is highly appealing for the development of novel electronic devices. Here a key challenge is to implement and combine low power consumption, high operation speed, reliable reversibility and compatibility with semiconductor technology. Hybrid structures based on the assembly of ferromagnetic and semiconducting building blocks are attractive candidates in that respect as such systems bring together the properties of the isolated constituents: They are expected to show magnetic order as a ferromagnet and to be electrically tunable as a semiconductor. Here we demonstrate the electrical control of the exchange coupling in a hybrid consisting of a ferromagnetic Co layer and a semiconductor CdTe quantum well, separated by a thin non-magnetic (Cd,Mg)Te barrier. The effective magnetic field of the exchange interaction reaches up to 2.5 Tesla and can be turned on and off by application of 1 V bias across the heterostructure. The mechanism of this electric field control is essentially different from the conventional concept, in which wavefunctions are spatially redistributed to vary the exchange interaction, requiring high field strengths. Here we address instead control of the novel exchange mechanism that is mediated by elliptically polarized phonons emitted from the ferromagnet, i.e. the phononic ac Stark effect. An essential parameter of this coupling is the splitting between heavy and light hole states in the quantum well which can be varied by the electric field induced band bending. Thereby the splitting can be tuned with respect to the magnon-phonon resonance energy in the ferromagnet, leading to maximum coupling for flat band conditions. Our results demonstrate the feasibility of electrically controlled exchange coupling in hybrid semiconductor nanostructures at quite moderate electric field strengths., Comment: 25 pages, 5 figures, supplementary material

Series connection of four quantum Hall effect (QHE) devices based on epitaxial graphene films was studied for realization of a quantum resistance standard with an up-scaled value. The tested devices showed quantum Hall plateaux RH,2 at filling factor i = 2 starting from relatively low magnetic field (between 4 T and 5 T) when temperature was 1.5 K. Precision measurements of quantized Hall resistance of four QHE devices connected by triple series connections and external bonding wires were done at B = 7 T and T = 1.5 K using a commercial precision resistance bridge with 50 microA current through the QHE device. The results showed that the deviation of the quantized Hall resistance of the series connection of four graphene-based QHE devices from the expected value of 4*RH,2 = 2h/e^2 was smaller than the relative standard uncertainty of the measurement (< 1*10^-7) limited by the used resistance bridge., Comment: 11 pages, 5 figures

Quantum Hall effect (QHE) devices based on epitaxial graphene films grown on SiC were fabricated and studied for development of the QHE resistance standard. The graphene-metal contacting area in the Hall devices has been improved and fabricated using a double metalization process. The tested devices had an initial carrier concentration of (0.6 - 10)*10^11 1/cm^2 and showed half-integer quantum Hall effect at a relatively low (3 T) magnetic field. Application of the photochemical gating method and annealing of the sample provides a convenient way for tuning the carrier density to the optimum value. Precision measurements of the quantum Hall resistance (QHR) in graphene and GaAs devices at moderate magnetic field strengths (<7 T) showed a relative agreement within 6*10^-9., Comment: 6 pages, 9 figures, 3 tables

Precision measurements of the quantum Hall resistance with alternating current (ac) in the kHz range were performed on epitaxial graphene in order to assess its suitability as a quantum standard of impedance. The quantum Hall plateaus measured with alternating current were found to be flat within one part in 10^7. This is much better than for plain GaAs quantum Hall devices and shows that the magnetic-flux-dependent capacitive ac losses of the graphene device are less critical. The observed frequency dependence of about -8x10^-8/kHz is comparable in absolute value to the positive frequency dependence of plain GaAs devices, but the negative sign is attributed to stray capacitances which we believe can be minimized by a careful design of the graphene device. Further improvements thus may lead to a simpler and more user-friendly quantum standard for both resistance and impedance.