Search

Formation obstacle avoidance is an essential attribute of the cooperative task in unmanned surface vehicle (USV) formation. In real-world scenarios involving multiple USVs, both formation obstacle avoidance and formation recovery after obstacle avoidance play a critical role in ensuring the success of collaborative missions. In this study, an Interfered Fluid Dynamic System (IFDS) algorithm was used for obstacle avoidance due to its excellent robustness, high computational efficiency and path smoothness. The algorithm can provide good local path planning for USVs. However, the use of the IFDS on USVs still has the defect of local extreme values, which has been effectively modified to obtain an enhanced IFDS (EIFDS). In formation, based on the leader–follower method, the virtual leader was used to determine the desired position of USVs in formation, and the streamlines generated by the EIFDS guided the USVs. In order to make the formation converge to the desired formation better, the vector and scalar of the EIFDS algorithm were uncoupled, and different designs were made to achieve convergence to the desired formation. The interfered residue of the IFDS is not suitable for addressing collision avoidance between USVs in practice. Therefore, the vector field method was employed to tackle the issue, with some enhancements made to optimize its performance. Subsequently, a weighted separation method was applied to combine the vector field and EIFDS, resulting in a composite field solution. Finally, the formation obstacle avoidance strategy based on composite fields was formed. The feasibility of this scheme was verified by simulation, and compared with the single IFDS formation method, the pairwise spacing of USVs behind obstacles could be increased, and the reliability of formation obstacle avoidance was increased. [ABSTRACT FROM AUTHOR]

This study presents a swarm-control algorithm to overcome the limitations inherent to single-object systems. The leader–follower swarm-control method was selected for its ease of mathematical interpretation and theoretical potential for the unlimited expansion of followers. However, a known drawback of this method is the risk of swarm collapse when the leader breaks down. To address this, a fault-coping algorithm was developed and supplemented to the leader–follower swarm-control method, which enabled the detection and responsive handling of failures, thereby ensuring mission continuity. Comprehensive data, including voltage, current, thruster speed, position, and heading angle were acquired and analyzed using sensors on unmanned surface vehicles (USVs) to monitor potential failures. In the case of a failure, such as thruster malfunction, the nearest USV seamlessly takes charge of the mission under the guidance of the fault-coping algorithm. The leader–follower swarm-control and fault-coping algorithms were successfully validated through actual sea area tests, which confirmed their operational efficacy. This study affirms the well-formed nature of the USV swarm formation and demonstrates the effectiveness of the fault-coping algorithm in ensuring normal mission performance under the virtual failure scenarios applied to the leader USV. [ABSTRACT FROM AUTHOR]

For the formation and obstacle avoidance challenges of UAVs (unmanned aerial vehicles) in complex scenarios, this paper proposes an improved collaborative strategy based on APF (artificial potential field). This strategy combines graph theory, the Leader–Follower method, and APF. Firstly, we used graph theory to design formation topology and dynamically adjust the distances between UAVs in real time. Secondly, we introduced APF to avoid obstacles in complicated environments. This algorithm innovatively integrates the Leader–Follower formation method. The design of this attractive field is replaced by the leader's attraction to the followers, overcoming the problem of unreachable targets in APF. Meanwhile, the introduced Leader–Follower mode reduces information exchange within the swarm, realizing a more efficient "few controlling many" paradigm. Afterwards, we incorporated rotational force to assist the swarm in breaking free from local minima. Ultimately, the stability of the integrated formation strategy was demonstrated using Lyapunov functions. The feasibility and effectiveness of the proposed strategy were validated across multiple platforms. [ABSTRACT FROM AUTHOR]

In the context of multi-vehicle formation, obstacle avoidance in unknown environments presents a number of challenges, including obstacles near the target, susceptibility to local minima, and dynamic obstacle avoidance. To address these issues in multi-vehicle formation control and obstacle avoidance within unknown environments, this paper uses PID control to optimize the potential field function of the artificial potential field method and conducts simulation experiments. The results demonstrate that the proposed algorithm achieves reductions of 39.7%, 41.9%, 24.8% and 32.0% in four efficiency functions (total iteration times, formation efficiency function value, energy consumption and standard deviation of iteration times) compared to other algorithms. The improved algorithm more effectively addresses the challenge of slow obstacle avoidance when vehicles approach the target and can handle unexpected situations such as local minima and dynamic obstacles. It achieves energy-efficient optimization for multi-vehicle obstacle avoidance in complex environments. [ABSTRACT FROM AUTHOR]

Formation obstacle avoidance is an essential attribute of the cooperative task in unmanned surface vehicle (USV) formation. In real-world scenarios involving multiple USVs, both formation obstacle avoidance and formation recovery after obstacle avoidance play a critical role in ensuring the success of collaborative missions. In this study, an Interfered Fluid Dynamic System (IFDS) algorithm was used for obstacle avoidance due to its excellent robustness, high computational efficiency and path smoothness. The algorithm can provide good local path planning for USVs. However, the use of the IFDS on USVs still has the defect of local extreme values, which has been effectively modified to obtain an enhanced IFDS (EIFDS). In formation, based on the leader–follower method, the virtual leader was used to determine the desired position of USVs in formation, and the streamlines generated by the EIFDS guided the USVs. In order to make the formation converge to the desired formation better, the vector and scalar of the EIFDS algorithm were uncoupled, and different designs were made to achieve convergence to the desired formation. The interfered residue of the IFDS is not suitable for addressing collision avoidance between USVs in practice. Therefore, the vector field method was employed to tackle the issue, with some enhancements made to optimize its performance. Subsequently, a weighted separation method was applied to combine the vector field and EIFDS, resulting in a composite field solution. Finally, the formation obstacle avoidance strategy based on composite fields was formed. The feasibility of this scheme was verified by simulation, and compared with the single IFDS formation method, the pairwise spacing of USVs behind obstacles could be increased, and the reliability of formation obstacle avoidance was increased.

In order to study the group cooperative control method of multiple intelligent networked vehicles, the multiple intelligent networked vehicles can move in the form of a fleet. Based on the leader–follower method, the paper optimizes the control effect of the leader–follower method by solving the error transmission phenomenon in the leader–follower method. In this paper, the modeling of the multiple intelligent connected vehicle adopts the vehicle dynamics model and the Magic Formula/Swift Magic tire model, and adopts the model predictive control (MPC) dynamics trajectory tracking controller for control. Through the CarSim–Simulink multi-vehicle dynamics co-simulation platform established in this paper, the group cooperative control experiments of multiple intelligent networked vehicles under different working conditions were carried out for simulation verification. The analysis results show that the maximum average error of the proposed method decreases from 8.802 to 0.094 in the case of straight line and 0.669 to 0.379 in the case of curve tracking, which proves that the method can effectively reduce the transmission of errors. [ABSTRACT FROM AUTHOR]

In the context of multi-vehicle formation, obstacle avoidance in unknown environments presents a number of challenges, including obstacles near the target, susceptibility to local minima, and dynamic obstacle avoidance. To address these issues in multi-vehicle formation control and obstacle avoidance within unknown environments, this paper uses PID control to optimize the potential field function of the artificial potential field method and conducts simulation experiments. The results demonstrate that the proposed algorithm achieves reductions of 39.7%, 41.9%, 24.8% and 32.0% in four efficiency functions (total iteration times, formation efficiency function value, energy consumption and standard deviation of iteration times) compared to other algorithms. The improved algorithm more effectively addresses the challenge of slow obstacle avoidance when vehicles approach the target and can handle unexpected situations such as local minima and dynamic obstacles. It achieves energy-efficient optimization for multi-vehicle obstacle avoidance in complex environments.

This study presents a swarm-control algorithm to overcome the limitations inherent to single-object systems. The leader–follower swarm-control method was selected for its ease of mathematical interpretation and theoretical potential for the unlimited expansion of followers. However, a known drawback of this method is the risk of swarm collapse when the leader breaks down. To address this, a fault-coping algorithm was developed and supplemented to the leader–follower swarm-control method, which enabled the detection and responsive handling of failures, thereby ensuring mission continuity. Comprehensive data, including voltage, current, thruster speed, position, and heading angle were acquired and analyzed using sensors on unmanned surface vehicles (USVs) to monitor potential failures. In the case of a failure, such as thruster malfunction, the nearest USV seamlessly takes charge of the mission under the guidance of the fault-coping algorithm. The leader–follower swarm-control and fault-coping algorithms were successfully validated through actual sea area tests, which confirmed their operational efficacy. This study affirms the well-formed nature of the USV swarm formation and demonstrates the effectiveness of the fault-coping algorithm in ensuring normal mission performance under the virtual failure scenarios applied to the leader USV.

For the formation and obstacle avoidance challenges of UAVs (unmanned aerial vehicles) in complex scenarios, this paper proposes an improved collaborative strategy based on APF (artificial potential field). This strategy combines graph theory, the Leader–Follower method, and APF. Firstly, we used graph theory to design formation topology and dynamically adjust the distances between UAVs in real time. Secondly, we introduced APF to avoid obstacles in complicated environments. This algorithm innovatively integrates the Leader–Follower formation method. The design of this attractive field is replaced by the leader’s attraction to the followers, overcoming the problem of unreachable targets in APF. Meanwhile, the introduced Leader–Follower mode reduces information exchange within the swarm, realizing a more efficient “few controlling many” paradigm. Afterwards, we incorporated rotational force to assist the swarm in breaking free from local minima. Ultimately, the stability of the integrated formation strategy was demonstrated using Lyapunov functions. The feasibility and effectiveness of the proposed strategy were validated across multiple platforms.

In recent years, marine engineers have increasingly relied on multiship collaborative work to complete complex tasks at sea and improve maritime transport efficiency. Ship formation significantly contributes to the maintenance of stability during multiship-coordinated operations, but establishing the formation structure while ensuring the safety of each ship remains challenging. Therefore, this study proposes an improved leader–follower-based formation algorithm as a solution to this issue. First, the fast marching square method was used for global static path planning. The leader–follower formation control method then enabled the path tracking of the follower ship to the leader ship. Finally, an improved artificial potential field method was used for local collision avoidance, and virtual obstacles were added to improve the situation in which the ship probably entered a local minimum point. The experimental results revealed that the proposed algorithm could plan a route with time, smoothness, and safety advantages for the formation leader and quickly form a stable formation. Notably, the ship can quickly initiate collision avoidance operations when it encounters an obstacle posing a collision risk.

To overcome the limitations of a single unmanned surface vehicle (USV), this study investigated the swarm control algorithms of USVs. Among various swarm control methods, a leader–follower swarm control method was selected and studied. The performance of the swarm algorithm proposed in this study was verified through an actual sea area test. A USV was designed and manufactured by dividing the power and communication parts. The power system was equipped with a coulometer to monitor the battery state in real time to protect the system through a switch linked to the coulometer in the case of abnormalities in the battery and to prevent accidents. In addition, a communication system was established to process the sensor data and camera image data of the USV in real time. Consequently, the desired swarm formation was achieved through the separately constructed swarm control algorithm. Before the actual sea area test, individual performance tests of each sensor were conducted. Finally, the performance of the swarm algorithm was verified by conducting a sea area test. The performance of the controllers was confirmed to be good, and the swarm formation was confirmed to be successful. [ABSTRACT FROM AUTHOR]

In order to study the group cooperative control method of multiple intelligent networked vehicles, the multiple intelligent networked vehicles can move in the form of a fleet. Based on the leader–follower method, the paper optimizes the control effect of the leader–follower method by solving the error transmission phenomenon in the leader–follower method. In this paper, the modeling of the multiple intelligent connected vehicle adopts the vehicle dynamics model and the Magic Formula/Swift Magic tire model, and adopts the model predictive control (MPC) dynamics trajectory tracking controller for control. Through the CarSim–Simulink multi-vehicle dynamics co-simulation platform established in this paper, the group cooperative control experiments of multiple intelligent networked vehicles under different working conditions were carried out for simulation verification. The analysis results show that the maximum average error of the proposed method decreases from 8.802 to 0.094 in the case of straight line and 0.669 to 0.379 in the case of curve tracking, which proves that the method can effectively reduce the transmission of errors.

In this paper, a novel formation control scheme is presented by integrating the dynamic surface control for multi-quadrotor subject with model uncertainties and external disturbances. First, according to requirements of formation control, the target trajectories of followers are obtained by the designed virtual quadrotors. Then, the formation control problem is transformed into the trajectory tracking control problem. Second, the saturation function and the auxiliary system are developed to make up for nonlinear terms arising from input saturation. A nonlinear extended state observer (ESO) is proposed to estimate and compensate for model uncertainties and external disturbances, and a dynamic surface controller based on the nonlinear ESO is constructed for the desired formation performance. In addition, the amount of communications between the quadrotors is decreased by the constructed distributed speed estimator. And the uniformly ultimately bounded is proved by using the Lyapunov method. Finally, the numerical example is used to demonstrate that the designed controller is effective. [ABSTRACT FROM AUTHOR]

This paper presents the system, controller, and field test results of an unmanned marine vehicle (UMV) developed to acquire real-time ocean exploration information. The system consists of an unmanned surface vehicle (USV), an unmanned underwater vehicle (UUV), and an underwater cable. The developed platform is a research platform for ocean exploration and was proposed to compensate for the shortcomings of the existing USV, UUV, and towing system. This paper describes the proposed UMV, including the design considerations such as electronics architecture, data management, sensors, and actuators and explains the path control algorithm and controller used to follow the specified path for ocean exploration. In order to confirm the performance of the developed platform and control algorithm, a way-point tracking experiment was performed, and the results are shown.

To overcome the limitations of a single unmanned surface vehicle (USV), this study investigated the swarm control algorithms of USVs. Among various swarm control methods, a leader–follower swarm control method was selected and studied. The performance of the swarm algorithm proposed in this study was verified through an actual sea area test. A USV was designed and manufactured by dividing the power and communication parts. The power system was equipped with a coulometer to monitor the battery state in real time to protect the system through a switch linked to the coulometer in the case of abnormalities in the battery and to prevent accidents. In addition, a communication system was established to process the sensor data and camera image data of the USV in real time. Consequently, the desired swarm formation was achieved through the separately constructed swarm control algorithm. Before the actual sea area test, individual performance tests of each sensor were conducted. Finally, the performance of the swarm algorithm was verified by conducting a sea area test. The performance of the controllers was confirmed to be good, and the swarm formation was confirmed to be successful.

Copyright of Journal of National University of Defense Technology / Guofang Keji Daxue Xuebao is the property of NUDT Press and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper proposes a formation control method by which multi-mining robots maintain a specified formation and follow a path. To secure the path tracking performance, a pure-pursuit algorithm is considered for each individual robot, and to minimize the deviation from the reference path, speed reduction in the steering motion is added. For the formation, in which two robots are parallel in a lateral direction, the robots track the specified path at a constant distance. In this way, the Leader-Follower method is adopted and the following robot knows the position and heading angle of the leader robot. Through the experimental test using two ground vehicle models, the performance is verified. [ABSTRACT FROM AUTHOR]