Search

A Stochastic Model for the Unit Commitment (SUC) problem of a hybrid microgrid for a short period of 24 h is presented. The microgrid considered in the problem is composed of a wind turbine (WT), a photovoltaic plant (PV), a diesel generator (DE), a microturbine (MT) and a Battery Energy Storage System (BESS). The problem is addressed in three stages. First, based on the historical data of the demanded power in the microgrid, an ARMA model is used to obtain the demand prediction. Second, the 24-h-ahead SUC problem is solved, based on generators’ constraints, renewable generation and demand forecast and the statistical distribution of the error in the demand estimation. In this problem, a spinning reserve of the dispatchable units is considered, able to cover the uncertainties in the demand estimation. In the third stage, once the SUC problem has been solved, a case study is established in real time, in which the demand estimation error in every moment is known. Therefore, the objective of this stage is to select the spinning reserve of the units in an optimal way to minimize the cost in the microgrid operation.

The optimal expansion of AC medium-voltage distribution grids for rural applications is addressed in this study from a heuristic perspective. The optimal routes of a distribution feeder are selected by applying the concept of a minimum spanning tree by limiting the number of branches that are connected to a substation (mixed-integer linear programming formulation). In order to choose the caliber of the conductors for the selected feeder routes, the maximum expected current that is absorbed by the loads is calculated, thereby defining the minimum thermal bound of the conductor caliber. With the topology and the initial selection of the conductors, a tabu search algorithm (TSA) is implemented to refine the solution with the help of a three-phase power flow simulation in MATLAB for three different load conditions, i.e., maximum, medium, and minimum consumption with values of 100%, 60%, and 30%, respectively. This helps in calculating the annual costs of the energy losses that will be summed with the investment cost in conductors for determining the final costs of the planning project. Numerical simulations in two test feeders comprising 9 and 25 nodes with one substation show the effectiveness of the proposed methodology regarding the final grid planning cost; in addition, the heuristic selection of the calibers using the minimum expected current absorbed by the loads provides at least 70% of the calibers that are contained in the final solution of the problem. This demonstrates the importance of using adequate starting points to potentiate metaheuristic optimizers such as the TSA.

Article number 1329 This paper discusses the power loss minimization problem in asymmetric distribution systems (ADS) based on phase swapping. This problem is presented using a mixed-integer nonlinear programming model, which is resolved by applying a master-slave methodology. The master stage consists of an improved version of the crow search algorithm. This stage is based on the generation of candidate solutions using a normal Gaussian probability distribution. The master stage is responsible for providing the connection settings for the system loads using integer coding. The slave stage uses a power flow for ADSs based on the three-phase version of the iterative sweep method, which is used to determine the network power losses for each load connection supplied by the master stage. Numerical results on the 8-, 25-, and 37-node test systems show the efficiency of the proposed approach when compared to the classical version of the crow search algorithm, the Chu and Beasley genetic algorithm, and the vortex search algorithm. All simulations were obtained using MATLAB and validated in the DigSILENT power system analysis software. Centro de Investigación y Desarrollo Científico de la Universidad Distrital Francisco José de Caldas 1643-12-2020 Dirección de Investigaciones de la Universidad Tecnológica de Bolívar PS2020002

The power flow problem in three-phase unbalanced distribution networks is addressed in this research using a derivative-free numerical method based on the upper-triangular matrix. The upper-triangular matrix is obtained from the topological connection among nodes of the network (i.e., through a graph-based method). The main advantage of the proposed three-phase power flow method is the possibility of working with single-, two-, and three-phase loads, including Δ- and Y-connections. The Banach fixed-point theorem for loads with Y-connection helps ensure the convergence of the upper-triangular power flow method based an impedance-like equivalent matrix. Numerical results in three-phase systems with 8, 25, and 37 nodes demonstrate the effectiveness and computational efficiency of the proposed three-phase power flow formulation compared to the classical three-phase backward/forward method and the implementation of the power flow problem in the DigSILENT software. Comparisons with the backward/forward method demonstrate that the proposed approach is 47.01%, 47.98%, and 36.96% faster in terms of processing times by employing the same number of iterations as when evaluated in the 8-, 25-, and 37-bus systems, respectively. An application of the Chu-Beasley genetic algorithm using a leader–follower optimization approach is applied to the phase-balancing problem utilizing the proposed power flow in the follower stage. Numerical results present optimal solutions with processing times lower than 5 s, which confirms its applicability in large-scale optimization problems employing embedding master–slave optimization structures.

This study deals with the minimization of the operational and investment cost in the distribution and operation of the power flow considering the installation of fixed-step capacitor banks. This issue is represented by a nonlinear mixed-integer programming mathematical model which is solved by applying the Chu and Beasley genetic algorithm (CBGA). While this algorithm is a classical method for resolving this type of optimization problem, the solutions found using this approach are better than those reported in the literature using metaheuristic techniques and the General Algebraic Modeling System (GAMS). In addition, the time required for the CBGA to get results was reduced to a few seconds to make it a more robust, efficient, and capable tool for distribution system analysis. Finally, the computational sources used in this study were developed in the MATLAB programming environment by implementing test feeders composed of 10, 33, and 69 nodes with radial and meshed configurations. Universidad Tecnológica de Bolívar

This article discusses the problem of minimizing power loss in unbalanced distribution systems through phase-balancing. This problem is represented by a mixed-integer nonlinear-programming mathematical model, which is solved by applying a discretely encoded Vortex Search Algorithm (DVSA). The numerical results of simulations performed in IEEE 8-, 25-, and 37-node test systems demonstrate the applicability of the proposed methodology when compared with the classical Cuh & Beasley genetic algorithm. In addition, the computation times required by the algorithm to find the optimal solution are in the order of seconds, which makes the proposed DVSA a robust, reliable, and efficient tool. All computational implementations have been developed in the MATLAB® programming environment, and all the results have been evaluated in DigSILENT© software to verify the effectiveness and the proposed three-phase unbalanced power-flow method. View Full-Text Universidad Tecnológica de Bolívar

Frequency in power systems is a real-time information that shows the balance between generation and demand. Good system frequency observation is vital for system security and protection. This paper analyses the system frequency response following disturbances and proposes a data-driven approach for predicting it by using machine learning techniques like Nonlinear Auto-regressive (NAR) Neural Networks (NN) and Long Short Term Memory (LSTM) networks from simulated and measured Phasor Measurement Unit (PMU) data. The proposed method uses a horizon-window that reconstructs the frequency input time-series data in order to predict the frequency features such as Nadir. Simulated scenarios are based on the gradual inertia reduction by including non-synchronous generation into the Nordic 32 test system, whereas the PMU collected data is taken from different locations in the Nordic Power System (NPS). Several horizon-windows are experimented in order to observe an adequate margin of prediction. Scenarios considering noisy signals are also evaluated in order to provide a robustness index of predictability. Results show the proper performance of the method and the adequate level of prediction based on the Root Mean Squared Error (RMSE) index. article-number: 151 ispartof: Electronics vol:10 issue:2 status: Published online

This paper deals with the problem of the optimal selection and location of batteries in DC distribution grids by proposing a new mixed-integer convex model. The exact mixed-integer nonlinear model is transformed into a mixed-integer quadratic convex model (MIQC) by approximating the product among voltages in the power balance equations as a hyperplane. The most important characteristic of our proposal is that the MIQC formulations ensure the global optimum reaching via branch &amp, bound methods and quadratic programming since each combination of the binary variables generates a node with a convex optimization subproblem. The formulation of the objective function is associated with the minimization of the energy losses for a daily operation scenario considering high renewable energy penetration. Numerical simulations show the effectiveness of the proposed MIQC model to reach the global optimum of the optimization model when compared with the exact optimization model in a 21-node test feeder. All the validations are carried out in the GAMS optimization software.

This paper deals with the problem of the optimal placement and sizing of distributed generators (DGs) in alternating current (AC) distribution networks by proposing a hybrid master&ndash, slave optimization procedure. In the master stage, the discrete version of the sine&ndash, cosine algorithm (SCA) determines the optimal location of the DGs, i.e., the nodes where these must be located, by using an integer codification. In the slave stage, the problem of the optimal sizing of the DGs is solved through the implementation of the second-order cone programming (SOCP) equivalent model to obtain solutions for the resulting optimal power flow problem. As the main advantage, the proposed approach allows converting the original mixed-integer nonlinear programming formulation into a mixed-integer SOCP equivalent. That is, each combination of nodes provided by the master level SCA algorithm to locate distributed generators brings an optimal solution in terms of its sizing, since SOCP is a convex optimization model that ensures the global optimum finding. Numerical validations of the proposed hybrid SCA-SOCP to optimal placement and sizing of DGs in AC distribution networks show its capacity to find global optimal solutions. Some classical distribution networks (33 and 69 nodes) were tested, and some comparisons were made using reported results from literature. In addition, simulation cases with unity and variable power factor are made, including the possibility of locating photovoltaic sources considering daily load and generation curves. All the simulations were carried out in the MATLAB software using the CVX optimization tool.

The increasing deployment of wind power is reducing inertia in power systems. High-voltage direct current (HVDC) technology can help to improve the stability of AC areas in which a frequency response is required. Moreover, multi-terminal DC (MTDC) networks can be optimized to distribute active power to several AC areas by droop control setting schemes that adjust converter control parameters. To this end, in this paper, particle swarm optimization (PSO) is used to improve the primary frequency response in AC areas considering several grid limitations and constraints. The frequency control uses an optimization process that minimizes the frequency nadir and the settling time in the primary frequency response. Secondly, another layer is proposed for the redistribution of active power among several AC areas, if required, without reserving wind power capacity. This method takes advantage of the MTDC topology and considers the grid code limitations at the same time. Two scenarios are defined to provide grid code-compliant frequency control. Australian Education International, Australian Government TEC2016-80242-P Ministerio de Economía y Competitividad DPI2016-75294-C2-2-R

Today's electricity paradigm requires that the notion of active distribution systems be introduced at both undergraduate and graduate curricula. This involves not only the customary theoretical foundations but also a suitable power engineering laboratory, where flexible enough and affordable resources allow students and researchers to carry out hands-on experiments reinforcing the concepts explained in the classroom. This paper describes the smart grid laboratory of the Power Engineering Group at the University of Seville, composed of a scaled-down distribution system, along with the required control and monitoring equipment, designed to help its users easily grasp the major influence that distributed generation and storage devices exert in the operation of medium-voltage distribution systems.

In the last decades, new types of generation technologies have emerged and have been gradually integrated into the existing power systems, moving their classical architectures to distributed systems. In spite of the positive features associated to this paradigm, new problems arise such as coordination and uncertainty. In this framework, microgrids (MGs) constitute an effective solution to deal with the coordination and operation of these distributed energy resources. This book chapter proposes a Genetic Algorithm (GA) to address the combined problem of Unit Commitment (UC) and Economic Dispatch (ED). With this end, a detailed model of a MG is introduced together with all the control variables and power restrictions. In order to optimally operate the MG, two operation modes are introduced, which attend to optimize economical factors and the robustness of the solution with respect power demand uncertainty. Therefore, it achieves a robust design that guarantees the power supply for different confidence levels. Finally, the algorithm is applied to an example scenario to illustrate its performance.

This paper proposes a new hybrid master–slave optimization approach to address the problem of the optimal placement and sizing of distribution static compensators (D-STATCOMs) in electrical distribution grids. The optimal location of the D-STATCOMs is identified by implementing the classical and well-known Chu and Beasley genetic algorithm, which employs an integer codification to select the nodes where these will be installed. To determine the optimal sizes of the D-STATCOMs, a second-order cone programming reformulation of the optimal power flow problem is employed with the aim of minimizing the total costs of the daily energy losses. The objective function considered in this study is the minimization of the annual operative costs associated with energy losses and installation investments in D-STATCOMs. This objective function is subject to classical power balance constraints and device capabilities, which generates a mixed-integer nonlinear programming model that is solved with the proposed genetic-convex strategy. Numerical validations in the 33-node test feeder with radial configuration show the proposed genetic-convex model’s effectiveness to minimize the annual operative costs of the grid when compared with the optimization solvers available in GAMS software. Universidad Tecnológica de Bolívar

This paper shows the equivalence of the matricial form of the classical backward/forward load flow formulation for distribution networks with the recently developed successive approximations (SA) load flow approach. Both formulations allow solving the load flow problem in meshed and radial distribution grids even if these are operated with alternating current (AC) or direct current (DC) technologies. Both load flow methods are completely described in this research to make a fair comparison between them and demonstrate their equivalence. Numerical comparisons in the 33- and 69-bus test feeder with radial topology show that both methods have the same number of iterations to find the solution with a convergence error defined as 1×10−10.

Phase balancing is a classical optimization problem in power distribution grids that involve phase swapping of the loads and generators to reduce power loss. The problem is a non-linear integer and, hence, it is usually solved using heuristic algorithms. This paper proposes a mathematical reformulation that transforms the phase-balancing problem in low-voltage distribution networks into a mixed-integer convex quadratic optimization model. To consider both conventional secondary feeders and microgrids, renewable energies and their subsequent stochastic nature are included in the model. The power flow equations are linearized, and the combinatorial part is represented using a Birkhoff polytope B3 that allows the selection of phase swapping in each node. The numerical experiments on the CIGRE low-voltage test system demonstrate the use of the proposed formulation.

In this paper, a novel model predictive control strategy, with a 24-h prediction horizon, is proposed to reduce the operational cost of microgrids. To overcome the complexity of the optimization problems arising from the operation of the microgrid at each step, an adaptive evolutionary strategy with a satisfactory trade-off between exploration and exploitation capabilities was added to the model predictive control. The proposed strategy was evaluated using a representative microgrid that includes a wind turbine, a photovoltaic plant, a microturbine, a diesel engine, and an energy storage system. The achieved results demonstrate the validity of the proposed approach, outperforming a global scheduling planner-based on a genetic algorithm by 14.2% in terms of operational cost. In addition, the proposed approach also better manages the use of the energy storage system. Ministerio de Economía y Competitividad DPI2016-75294-C2-2-R Unión Europea (Programa Horizonte 2020) 764090

A control strategy for a mid-size Permanent Magnet Synchronous Machine (PMSM) based Wind Energy Conversion System (WECS) operating under unbalanced voltages and currents is presented in this paper. The analyzed WECS is based on a PMSM connected through a non-controlled rectifier to the DC-bus. This paper proposes a new control strategy for improving the wind energy conversion efficiency based on the DC voltage regulation. In addition, in order to eliminate over-currents risk during unbalanced conditions, a control scheme has been designed to independently control positive and negative sequence currents. The proposed controller is based on the feedback linearization technique and shows an improvement in the system performance regarding 2ω ripple elimination in the DC voltage arising during AC-side imbalances and an accurate and decoupled active and reactive power tracking.