Search

Background Recently, increased attention on regenerative medicine and biological injective treatments have been proposed to restore native cartilage. Micro-fragmented adipose tissue (MFAT) has been studied for its anti-inflammatory, paracrine, and immunomodulatory effects. The long-term effects of MFAT are still poorly understood: the aim of the present study is to demonstrate how hip articular injections with autologous MFAT can have an impact on clinical outcomes. Methods Seventy-one consecutive patients affected by early hip osteoarthritis underwent an ultrasound-guided hip injection of autologous MFAT between June 2017 and December 2018. Patients were divided into four groups according to the Oxford Hip Score. All patients received 4 mL of autologous micro-fragmented adipose tissue under an ultrasound guide. A clinical evaluation was done between 29 and 41 months after the initial treatment. During this follow-up period, we recorded any new treatment the patients had done, whether that be injection or arthroplasty surgery. Results The study included 55 patients. Out of 55 patients, 28 saw benefits and were in no need of further treatment. Moreover, the score between the beginning and control increased by 6.9 points. Ten patients underwent a new articular injection: the mean time between the two injections was 635.7 ± 180 days. Seventeen patients underwent total hip replacement: the mean period between the autologous MFAT injection and the surgery was 495 days. Conclusion This study found that intra-articular injections with autologous MFAT achieve beneficial clinical results in patients affected by early to moderate hip osteoarthritis, with an OHS between 48 and 30. Furthermore, these subjects are the ideal patients for whom this treatment obtains good clinical results.

A peri-implant fracture near the volar plate of the distal radius represents a rarity and can be associated with a mechanical failure of the devices. A literature review was conducted including all fractures that occurred around a volar wrist plate, which could be associated with an ulna fracture. All articles published until December 2021 were considered according to the guidelines presented in the PRISMA Statement. The search was conducted with the PubMed electronic database, Cochrane Database of Systematic Reviews, Medline, Embase, and Google Scholar. Only nine cases of these fractures were reported in the literature. The causes could be due to delayed union/non-union of the old fracture after low energy traumas, high energy trauma in patients with poor bone quality, or hardware mechanical failure. Furthermore, the literature review of peri-implant radius fracture shows different level of radius fracture and types of implant failure. In accordance with these different cases, a new classification of peri-implant fracture of the distal radius is proposed.

In 1983, Fulkerson introduced a technique of tibial tubercle osteotomy performed according to an inclined plane with respect to frontal plane. Due to obliquity of the osteotomy plane, this procedure allows both anterior and medial transfer of the tibial tubercle. The purpose of the study was to investigate the influence of the different degrees of the oblique plane of osteotomy on anterior displacement and the contact surface area of tibial tubercle. Synthetic bones were used for the study. An osteotomy of the tibial tubercle (TT) was performed in each specimen. Specifically, 3 different degrees of osteotomy planes relative to the reference frontal plane were examined: 20°, 30° and 40°. On each sample, tibial tubercle medial transposition of 5mm, 10mm and 15mm was performed. Anterior displacement was measured with a caliper. Further, the bone contact surface was calculated for each sample and each transposition. Finally, the measured data were statistically compared with a geometric model. At 5mm of medial TT transposition, the anterior displacement (AD) was 0.1mm when the osteotomy was performed at 20°. It increased of 1.5mm and 2.7mm, respectively at 30° and 40°. At 15mm of TT transposition, the AD was 3.4mm at 20°, 7.6mm at 30° and 10.0mm at 40°. Concerning the amount of medialization, it was observed a decrease in the overall contact surface passing from 5 to 15mm of TT transposition. In addition, regarding the oblique plane of the osteotomy, it was observed an increase in the contact surface area passing from 20° to 40°. The main result of the present study is that the amount of anteriorization and medialization of the tibial tubercle could be predicted by the degrees of oblique plane of osteotomy. An increase in medialization significantly reduces the contact surface area at low degrees of osteotomy plane, potentially increasing the risk of non-union.

Anterior cruciate ligament (ACL) reconstruction represents one of the most common procedures in orthopedic surgery. It usually involves the harvest of both gracilis and semitendinosus tendons from the ipsilateral knee. Different methods of hamstring graft preparation have been proposed in recent years, to create an adequate graft diameter reducing morbidity linked to gracilis tendon harvesting procedure. More recently, the use of only 1 of the tendons (semitendinosus) in a tripled or quadrupled arrangement has been described, especially in an all-inside type of reconstruction. Having a thicker tendon with a quadrupled semitendinosus (ST), instead of double gracilis and ST enables to have a graft with enough diameter to resemble more closely the native ACL and decreases the risk of graft re-rupture. The present study aims to describe different options of hamstring graft preparing, listing and analyzing each configuration to help surgeons to choose the most suitable graft type for their patients. © 2022, Open Medical Publishing. All rights reserved.

Purpose The present study tested and compared the biomechanical properties of four different triplicate graft tendon techniques. Methods 32 tripled tendons from the common extensor muscle of bovine fingers were tested on a material testing machine, passing the end loop over a metal rod of a clevis connected to the load cell on the upper side, and fixing the lower end to a clamp. The samples were divided into four groups: (A) tripled with a free end sutured only to one of the two fixed bundles (B) tripled with a free end positioned between the two fixed strands and sutured to both (C) tripled with an S-shape and all the three strands sutured together at the upper and lower extremities of the graft (D) partially quadrupled with the free end sutured together with the other three bundles at the upper extremity. Each sample was pretensioned at 50 N for 10 min and then subjected to 1000 load control cycles between 50 and 250 N. Finally, each sample was subjected to a load to failure test. Authors also present some preliminary results on the feasibility of a non-contact and full-field Thermoelastic Stress Analysis technique, based on Infrared Thermography, to evaluate the level of stress on the whole graft, and hence on each strand, during fatigue loading. Results Eighty five percent of the samples failed at the level of the clamp. The cyclical elongation progressively decreased in all the samples and there was a simultaneous increase in stiffness. An increased stiffness was noted between Group 2 vs Group 3 and Group 2 vs Group 4 at the 500th and 1000th cycle. The failure loads were as follows: (a) 569.10 N, (b) 632.28 N, (c) 571.68 N, (d) 616.95 N. None of the parameters showed a statistically significant difference between the four groups. Conclusion This study reported similar biomechanical behavior of four different models of tripled grafts suitable for ACL reconstruction. In addition, the biomechanics of overall tripled tendon grafts seems more affected by the viscoelastic property of the tendon itself rather than the preparation method.

Background Fracture of the proximal femur is the most feared complication of osteoporosis. Given the numerous physiological functions that magnesium performs in our body, in the literature there is a correlation between osteoporosis and low serum levels of magnesium. Aim Evaluate the incidence of hypomagnesemia in patients with lateral fragility fracture of the proximal femur, the possible correlation between serum magnesium levels and fractures, and the effectiveness of supplementing Sucrosomial® magnesium associated with therapeutic exercise on the outcome of these patients. Methods We divided the study into two parts. In the first part, we assessed the preoperative incidence of hypomagnesemia in patients using a blood test. In the second part, patients with hypomagnesemia were divided, in the post-operative period, into two groups, who received, respectively, only therapeutic exercise or oral supplementation with sucrosomial magnesium associated with therapeutic exercise. Results Half of the patients with fragility femoral fracture had hypomagnesemia, with a higher incidence of the subclinical form. From the comparison between the two groups, the T1 treatment group showed a significant improvement in blood levels of magnesium (2.11 ± 0.15 vs. 1.94 ± 0.11; p p p p Conclusions More attention would be needed in the diagnosis and correction of subclinical hypomagnesemia and not just the simple and clinically evident one, including hypomagnesemia among the modifiable risk factors for osteoporosis.

A peri-implant fracture near the volar plate of distal radius represent a very rare injury. The main factor of this lesion is high energy trauma on the wrist. We report a case of a 61-year-old woman with a peri-implant fracture located just proximally to the plate and a fracture of the ulnar head that occurred after a simple fall. The patient was surgically treated by plate and screws removal. The fracture was fixed using a longer volar plate for the radial fracture and a plate for the head ulnar fracture. Different factors such as osteoporosis, BMI and screw position could influence the fracture pattern. However, considering growing use of plates for distal radius fracture fixation, the frequency of these kind of fracture will probably increase.

Aim Total knee arthroplasty represents a procedure that is successfully performed to relieve functional limitation and pain in advanced stages of osteoarthritis. In the next 20 years the number of these procedures will be increased about four times. Patient specific instrumentation (PSI) has been introduced in the past years. The aim of this study was to evaluate whether SUI are more useful in clinical, organizational and economic terms. Methods A database search about single use instrumentation (SUI) was conducted on PubMed and Google Scholar for the period 2010-2020 using the following key "total knee replacement", "total knee arthroplasty", "single use instruments", and "disposable instruments". The results of the selected studies were classified according to clinical, economic and organizational criteria. Results The main advantage of SUI has been reported to reduce costs, timely turnover of operating rooms, maximizing the operating room utilization and patient throughput, improving the number of outpatient total joint replacements. No difference has been found other than with regard to conventional instruments in terms of clinical outcome such as hip-knee-ankle angle and other radiographic parameters, Oxford Knee Score, while a decreased infection rate has been demonstrated. Regarding the economic aspect, a reduction of direct and indirect reduction of costs has been shown for the cost of instruments reprocessing, tray sterilization, 90-day infection rate. Conclusion The SUI can be an alternative to conventional instruments, but there are still few studies in the literature regarding clinical outcomes.

Purpose. This study aimed to compare the biomechanical proprieties of 4 and 5-strand- grafts. Methods. For the present study, fresh-frozen bovine common digital extensor tendons were used. Tendon grafts were prepared and sized to have a length of almost 27 cm and a cylinder 4 strand diameter of 8 mm. In half of all samples (Group A, n=12,), the graft was formed by 2 bundles duplicated around a metallic rod creating a 4-strand-tendon construct. In the other half of samples (Group B, n= 12,) 5-strand-tendon construct was created duplicating a single tendon around the rod, and tripling the other one. The grafts were preconditioned at 50 N for 10 min, followed by 1,000 cyclic loading between 50 and 250 N. Load-to-failure test was then carried out at a rate of 1 mm/s. Results. No statistically significant differences were found between two groups concern- ing cyclic elongation at the 500th cycle and at the final cycle. An increased stiffness was observed in the Group B during cyclic loads and at pull-out (p

Background Cement augmentation of internal fixation of hip fracture has reported to improve fracture stability in osteoporotic hip fractures, reducing the risk of cut-out of the sliding screw through the femoral head. The purpose of present study was to perform a systematic literature review on the effects of augmentation technique in patients with osteoporotic hip fractures. Material and methods A comprehensive literature search was systematically performed to evaluate all papers published in English language included in the literature between January 2010 and July 2020, according to the PRISMA 2009 guidelines. In vivo and in vitro studies, case reports, review articles, cadaveric studies, biomechanical studies, histological studies, oncological studies, technical notes, studies dealing with radiological classifications and studies on revision surgery were excluded. Results A total of 5 studies involving 301 patients were included. Patients had a mean age of 84.6 years and were followed up for a mean period of 11 months. The proximal femoral fractures were stabilized with implantation of the PFNA or Gamma nail and augmentation was performed with two different cements: polymethylmethacrylate (PMMA) in 4 studies and calcium phosphate (CP) in one study. Overall, 57.5% of patients reached the same or greater preoperative mobility, and postoperative Parker Mobility Score and Harris Hip Score were acceptable. No significantly complications were observed, and no additional surgery related to the implant was required. Conclusion The results of this systematic review show that cement augmentation is a safe and effectiveness method of fixation to treat trochanteric fractures.

Introduction Postoperative pain management in the total knee replacement (TKR) represent a fundamental step for a positive outcome, allowing rapid mobilization, already on the first day. Further, continuous peripheral nerve block techniques have been reported to allow effective and safe control of acute postoperative pain, ensuring the implementation and completion of an accurate and intensive joint rehabilitation program. Aim The aim of this study was to assess early mobility and compliance of patients that underwent TKR surgery using the femoral block. Methods For the study, all patients that underwent TKR from 2015 to 2018 with ASA score between II-III was evaluated. Patients underwent vital parameters monitoring and were treated initially with midazolam (0.05mg / kg) e.v. combined sciatic block + femoral perineural catheter positioning using a peripheral nerve stimulation-assisted technique. Results Intraoperatively, satisfactory analgesia was guaranteed in all patients, associated with a complete muscle relaxation of the affected limb. High patient compliance, associated with good control of acute postoperative pain was obtained in the first 24 hours after surgery (VAS 0- 1). The ROM outcomes were good in all rehabilitation stages, managing to reach 90 degrees bending on the seventh day with an average KSS score of 88-90. Patient satisfaction and impact on quality of life were assessed with the SF-36 showing average scores of 78. Conclusion Continuous femoral nerve blocking ensures good postoperative analgesia in TKR allowing an early joint mobilization, a rapid functional recovery of the knee and increasing patient compliance during the post-operative rehabilitation program.

Vohwinkel Syndrome, also known as Keratoderma Hereditarium Mutilans, is an extremely rare dominant autosomal keratosis. It typically presents with “starfish” keratoses on the knuckles, palmoplantar keratoderma (PPK), hearing impairment and mutilating digital constriction bands (pseudoainhum) that cause strangulation, often leading to autoamputation of the affected digit. Both medical and surgical treatment haven’t shown to date consistent results, in the treatment of pseudoainhum. In this study we present the case of a woman with Vohwinkel syndrome who showed constriction bands causing ischemic changes of the 5th digit of the right hand for which she was treated with surgery. We also present a review of the literature for the management of this disease.

Osteoblastoma is a relatively rare, benign, bone-forming tumor, commonly observed in the second and third decades of life. Spine and the long tubular bones are the most common sites of involvement. Osteoblastoma is infrequently seen in other sites, including the bones of hand and foot. A rare case of a 35-year-old man that presented an osteoblastoma of the cuboid bone is reported. The patient was treated with surgical resection and grafting. After the intervention, the patient recovered with no clinical and radiological evidence of recurrence after one year of follow-up. Several cases of osteoblastoma-like variant of osteosarcoma of the cuboid have been previously reported, but, to our knowledge, this is the first case of conventional and isolated osteoblastoma involving the cuboid bone reported in the literature.

Enchondroma (EC) is a benign and cartilage-forming tumor that causes intramedullary lesions. Moreover, EC is the most common bone tumor in the phalanges and metacarpal bones of the hand, deforming the structure and causing pain and functional limitation. The management of this neoplasia is the surgical treatment and the approach that is well-accepted consists in the curettage followed by the void augmentation with biological or synthetic fillers. The results from surgery are usually good and the recurrence rate is low (2-15%). In this article we report a case of EC recurrence of the proximal phalanx of the fifth finger of the hand after curettage and grafting. The patient was treated with the amputation of the fifth ray according to the Tsuge technique, obtaining a satisfying clinical result.

Background: A precise assessment of cup version after hip resurfacing is generally requested, especially in clinical trials or in case of complications. Aims: To identify which diagnostic imaging modality, between AP pelvis X-rays, the AP Pelvis CT Scout image and reduced-dose axial CT scan, is the most precise to assess cup version of an all-ceramic hip resurfacing implant in a first-in-human clinical trial. Methods: We retrospectively assessed the cup version of the first 20 patients who underwent an experimental all-ceramic hip resurfacing on AP pelvis X-rays (0.8 mSv of radiation), AP pelvis CT scout images (0.016 mSv) and axial CT slices performed using a reduced dose protocol (0.3 mSv). The intra-observer and inter-observer reliabilities were calculated. Results: Reduced dose Pelvis CT scan was the most precise imaging modality to detect cup version (Pearson Correlation Coefficient, PCC = 0.98, p < 0.001). The AP Pelvis CT Scout image was found to be sufficient to measure cup version within an acceptable margin of tolerance (mean difference ± 4.7° from pelvis CT scan) and highly correlated to axial pelvis CT scan measurements (PCC 0.97, p < 0.001). Analysis of cup version from AP X-rays poorly correlated with measurements from Pelvis CT (PCC 0.59, p = 0.006). Conclusions: Due to lower radiation exposure and highest accuracy, reduced dose CT is a valid modality to measure acetabular cup version after ceramic hip resurfacing. Plain X-rays are not accurate nor precise to measure version, whereas high agreement of measurements between AP Pelvis CT Scout and axial pelvis CT scan was found.

Introduction We aimed to evaluate the efficacy of the use of the electromagnetic distal targeting system in treating humeral shaft fracture. Methods Patients were divided in: Group 1) patients that received a distal locking screw placement following the free-hand technique; Group 2) patients in which the distal locking screw was performed using the SURESHOT device. Results No differences were noted comparing Group 1 (freehand) [71,9 range 40–135 min] to Group 2 (SURESHOT)[70, range 25–125 min]. Conclusion The use of the EM distal targeting system doesn't reduce the overall operative time of the humeral shaft fracture fixation using IMN.

Purpose: To investigate the effect of applying an additional suture to enhance the biomechanical behavior of the suture–meniscus construct used during the transtibial pull- out repair technique. Methods: A total of 20 fresh-frozen porcine tibiae with intact medial menisci were used. In one half of all speci- mens (N = 10), two non-absorbable sutures were passed directly over the meniscal root from the tibia side of the meniscus to the femoral side (2SS). In other ten specimens, three sutures were passed over the meniscal root (3SS). All specimens were subjected to cyclic loading followed by load-to-failure testing. Displacement of the construct was recorded at 100, 500, and 1000 cycles. Further, stiffness (500–1000 cycles) and ultimate load and modes of failure of the suture–meniscus construct were also recorded. Results: There was no statistically significant difference between the Group 2SS and Group 3SS at the 1st (1.6±0.7vs1.4±0.4mm)andthe100thcycle(2±0.7 vs 1.8 ± 0.4 mm). At 500 and 1000 cycles, the 2SS fixa- tion technique resulted in significantly more displacement than the 3SS fixation technique (2.8 ± 0.6 vs 2.3 ± 0.5 mm; 3.1 ± 0.7 vs 2.5 ± 0.5 mm) (p\0.05). No differences between two groups were noted concerning ultimate load to failure and stiffness (500–1000 cycles). Conclusion: Three single sutures technique provided superior biomechanical properties compared with the two single sutures technique during the conducted fatigue tests. Clinical relevance Applying three simple stitches during meniscal root repair might be beneficial for healing of the posterior meniscal root, potentially reducing the post-op- erative immobilization time.

The lateral collateral ligament complex represents the primary lateral elbow ligament stabilizers. In cases of lateral elbow instability, surgical treatment is recommended. Repair should be anatomical and should restore stability to the elbow in order to permit an early active range of motion. Anatomic repair of soft tissue avulsions from bone can be performed with trans-osseous suture or suture anchors. Reconstruction may be required in severe cases and where primary repair is not possible. This chapter describes the surgical techniques for repair and reconstruction of the lateral collateral ligament of the elbow.

The aim of the present study was to compare the biomechanical characteristics of posterior meniscal root repair of porcine and human menisci. Methods. In vitro biomechanical testing was performed using 12 porcine menisci and 12 human menisci. All menisci were sectioned at the midpoint of their circumference and mounted on an electro-mechanic testing machine. The posterior root was sutured with three single stitches using a no. 2 non-absorbable suture. All specimens were subjected to cyclic axial loading followed by load-to-failure testing. Displacements were recorded at the conclusion of cycles 1, 100, 500 and 1000. Further, load-displacement curves of each specimen were recorded and analyzed to determine the cyclic stiffness at the 500th and 1000th cycle. Results. A higher elongation of the human specimens was observed after 1, 100, 500 and 1000 loading cycles, when it was compared to porcine specimens (p < 0.05). The total displacement amount of the porcine specimens at the 1000th cycle was 2.2 mm +/- 0.1. Similarly, the total displacement amount of the human specimens at the 1000th cycle was 3 mm +/- 0.5. Higher stiffness was observed in the porcine group at the 500th and 1000th cycle. Conclusion. Three single sutures technique for meniscal root repair appears to be biomechanically effective for both human and porcine menisci.

For those patients with instability of the medial and lateral sided of the elbow, there is a place for a circumferential graft. This has the main advantage of simplifying the bone tunnel creation and graft fixation, compared to having both medial- and lateral-sided reconstructions.

Purpose: The purpose of this study was to characterize the biomechanical effect of two grasping suture techniques used during ligament reconstruction: the modified rolling-hitch (MRH) and the modified finger-trap (MFT). Methods: Flexor profundus tendons were harvested from fresh pig hind-leg trotters. Each specimen was mounted on an electro-mechanic universal testing machine (Instron 3367). In half of all tendons (15 specimens), the suture was passed around the tendon following the MRH knot (Group 1). In the remaining half of all tendons (15 specimens), the suture was passed over a distance of 30 mm according to the MFT suture technique (Group 2). As per standard intra-operative technique, a 1 cm residual tendon stub was left free from suture in all samples. All specimens were preconditioned to a load of 50 N for 10 min, followed by three cycles loading between 50 and 120 N. At this point, each sample was cyclically tensioned between 35 and 240 N, at 1 Hz for 200 cycles. Load-to-failure test was then carried out at a rate of 200 mm/min. Results: Rupture of the suture material at the knot was the mode of failure in all specimens during the loaded to failure test. Significant difference was found between Group 1 vs Group 2 for the elongation between the 0th cycle and 10th cycle, the elongation between the 10th cycle and 200th cycle, the mean stiffness at the 10th cycle, and the mean stiffness at the 190th cycle. No significant differences were noted between Group 1 and Group 2 concerning the ultimate load-to-failure. Conclusion: This study showed that both suture methods appear to be biomechanically effective in a porcine tendon model. However, the single-knot grasping technique (MRH) provided superior biomechanical properties compared with the MFT technique.

Introduction Despite good clinical outcome proposals, there has been relatively little published regarding the use of non-metallic implant for patellar fracture fixation. The purpose of the study was to perform a systematic literature review to summarize and evaluate the clinical studies that described techniques for treating patella fractures using non-metallic implants. Methods A comprehensive literature search was systematically performed to evaluate all studies included in the literature until November 2015. The following search terms were used: patellar fracture, patella suture, patella absorbable, patella screw, patella cerclage. Two investigators independently reviewed all abstracts and the selection of these abstracts was then performed based on inclusion and/or exclusion criteria. Results A total of 9 studies involving 123 patients were included. Patients had a mean age of 33.7 years and were followed up for a mean of 18.9 months. The most common method for fracture fixations included the use of suture material. Good clinical outcomes were reported among all studies. Thirteen patients (10.5%) presented complications, while 4 patients (3.2%) required additional surgery for implant removal. Conclusion There is a paucity of literature focused on the use of non-metallic implant for patellar fracture fixation. However, this systematic review showed that non-metallic implants are able to deliver good clinical outcomes reducing the rate of surgical complications and re-operation. These results may assist surgeons in choosing to use alternative material such as sutures to incorporate into their routine practice or to consider it, in order to reduce the rate of re-operation.

Self-inflicted fractures simulating traffic accident represent a new social fraud opportunity for criminality. Recognising scams through an increase of awareness of existence of self-inflicted arm fractures for insurance fraud could help community health workers to report these injuries to the competent authorities. In this article, authors have recognised an unusual but consistent pattern of upper and lower limb fractures whose incidence does not coincide in numerical terms with what is reported in literature. The aim of the present study is to describe fracture patterns observed over the past 2 years. Further, authors describe clinical presentations of these fractures and attempt to define a possible mechanism of these types of injuries.

Background The aim of this study is to evaluate a possible correlation between specific anthropometric parameters and sizes of knee tendons commonly used for ACL reconstruction. We hypothesized that specific clinical and radiological knee measurements could be better tendon sizes predictors than age, gender, height and weight. Materials and methods 100 consecutive patients were enrolled and 77 patients met the inclusion criteria of the study. All patients underwent a MRI of the knee with a 1.5 T super conducting MR System. For each patient, anthropometric data such as gender, height, weight, body mass index (BMI) and knee circumference were recorded. Specific MRI knee measurements were performed on each study: patellar tendon (PT) thickness and length, quadriceps tendon (QT) thickness, semitendinosus tendon (ST) diameter, gracilis tendon (GR) diameter, the largest patella and intercondylar width. Results The mean ST diameter, QT thickness and PT thickness were higher in males than in females. No significant differences were noted between males and females concerning GT diameter and the knee circumference. In addition, male knees had greater patellar and intercondylar width than female knees. Significant, but only weak correlations were found between patient anthropometric data and hamstrings diameter, PT length, and QT and PT thickness. Intercondylar and patellar width present a moderate correlation between PT thickness, PT length and ST diameter. Conclusion The intercondylar and patellar width presented a moderate correlation with PT thickness, PT length and ST diameter. Further, weak correlations were found between patient anthropometric data (gender, weight, height, BMI) and GR and ST diameter, PT length, and QT and PT thickness. This results may help surgeons during preoperative planning, specifically regarding graft choice and size. Level of evidence III.

Introduction We conduct a systematic and qualitative review of the current literature to evaluate studies that described bilateral ruptures of the extensor mechanism of the knee. Methods A comprehensive literature search was performed to evaluate all studies included in the literature until September 2016. Results Fourteen studies with a total of 44 patients met the inclusion criteria. There were 14 patients with CRF (61%), 6 patients were affected by diabetes mellitus (14%) while other 6 patients were obese patients (14%). Conclusion CRF represents the most frequent comorbidity in patients with bilateral quadriceps/patellar tendon ruptures.

The medial and lateral collateral ligament complexes represent primary elbow ligament stabilizers. Injury to these structures may occur because of an elbow dislocation or due to a severe varus or valgus force. Most elbow dislocations are stable once reduced and may be treated conservatively. However, if the elbow remains unstable surgical treatment is recommended. Repair should be anatomical and should restore stability to the elbow in order to permit an early active range of motion. Reconstruction may be required in severe cases and where primary repair is not possible. Depending on the degree of instability, either one or both of the collateral ligament complexes may need to be repaired or reconstructed. This review describes the pathoanatomy of the unstable elbow and outlines the surgical techniques for repair and reconstruction of both collateral ligaments.

Background: The purpose of the present study was to compare the operative time for graft prepa- ration using different techniques for graft sutur- ing. Material and methods: Flexor profundus tendons were harvested from fresh pig hind-leg trotters. Three different suture techniques were investigat- ed: the Krackow stitch (K), the Whipstitch (W), and the Modified Finger-Trap suture (MFT). Ten- dons were sutured starting at 10 mm from the dis- tal free end of the tendon. The suture configura- tions of the Krackow stitch and Whipstitch were completed with five suture throws. According to the MFT technique, the suture was wrapped five times around the tendon over a distance of 30 mm. The time required to perform a complete su- ture on each tendon was measured. Five indepen- dent examiners of different levels of training mea- sured the time required for graft preparation dur- ing 3 separate occasions to determine intraob- server repeatability and interobserver reproduci- bility. Results: The mean time required for graft prepa- ration following the Krackow technique was 69.1 seconds ± 18.3 SD (range 31.8-120). The Whip- stitch technique took an average of 59.9 seconds ± 21.2 SD (range 27-93). The MFT suture required a mean of 29.3 seconds ± 11.4 SD for completing the suture (range 21.6-33). In all examiners the time required to complete the MFT suture was significantly less than the other suture tech- niques (p < 0.05). Intraobserver intraclass correla- tion coefficients for each examiner ranged from 0.72 to 0.83. Conclusion: Low graft preparation time is re- quired to complete a MFT suture in a porcine ten- don model. Further, time required for graft prepa- ration using the MFT was shorter than other su- turing techniques such as the Krackow and Whip- stitch techniques. Clinical relevance: The MFT suture could be used for graft set-up with the main advantage of reduc- ing the time required in comparison with other su- ture techniques.

Purpose A suture passed along the part of the graft that will be inserted into the femoral tunnel is widely used by surgeons, because it could prevent the graft sliding on the femoral fixation device during pulling from the tibial side. The aim of this study was to evaluate the biomechanical effects of suturing the intratunnel femoral part of the graft during an anterior cruciate ligament (ACL) reconstruction. Methods Bovine digital extensor tendons and tibias were harvested from 20 fresh-frozen mature bovine knees ranging in age from 18 to 24 months. Quadruple-strand bovine tendons were passed through the tibial tunnel and secured distally with a bioabsorbable interference screw. In one half of all grafts (N = 10), the looped-over part of the graft was sutured in a whipstitch technique over a distance of 30 mm (Group 1). In one half of all grafts (N = 10), the looped-over part was left free from any suture (Group 2). The grafts were preconditioned at 50 N for 10 min, fol- lowed by cyclic loading at 1 Hz between 50 N and 250 N for 1,000 cycles. Load-to-failure test was then carried out at a rate of 1 mm/s. Results There was no statistically significant difference between mean stiffness at pullout and yield load between the two groups. In all specimens on Group 1, failure occurred following to partial breaking and then slipping of the tendons between the screw and the tunnel. Concerning Group 2, in six cases failure occurred as described for Group 1 specimens. In the remaining four cases, failure occurred entirely through the ligament mid-substance. Conclusions Suturing in a whipstitch fashion the femoral portion of the graft doesn’t affect the mechanical proprie- ties of the ACL graft. When suspension fixation device is used, suturing the looped-over part of the graft could be helpful in order to provide equal tension in all of the strands of the graft at time of tibial fixation.

We evaluated the relationship between motor and neuropsychological deficits in subjects affected by amnestic Mild Cognitive Impairment (aMCI) and early Alzheimer’s Disease (AD). Kinematics of goal-directed movement of aMCI and AD subjects were compared to those of age-matched control subjects. AD showed a slowing down of motor performance compared to aMCI and controls. No relationships were found between motor and cognitive performances in both AD and aMCI. Our results suggest that the different motor behaviour between AD and aMCI cannot be related to memory deficits, probably reflecting the initial degeneration of parietal-frontal circuits for movement planning. The onset of motor dysfunction in early AD could represent the transition from aMCI to AD.

Background The subtalar dislocation (SD) of the foot is an uncommon injury characterized by a simultaneous dislocation of talocalcaneal and talonavicular joints without involvement of the tibiotalar and calcaneocuboid joints. Purposes The purpose of this study was to evaluate the clinical and radiological outcome in a consecutive series of close SD. Methods We retrospectively evaluated a case series of patients who presented a close SD. Thirteen patients were selected for this study. There were 9 patients with a medial SD, 3 patients with a lateral dislocation and 1 patient with a posterior subtalar dislocation. Results The most frequent symptoms observed in our study included transient mild pain, swelling and decreased ankle ROM, which did not restrict patients’ daily activities. However, lower AOFAS scores were observed on patients with associate peritalar osseous injuries. Conclusion The results of the present study suggest that detecting and treating any associate peritalar fractures are the keys to a successful long-term outcome.

While scapula fractures are often treated nonoperatively, there are a number of displaced fractures in which surgical treatment can be considered. When necessary, open reduction and internal fixation with plates is the accepted method for stabilization. However, there are limited options of commercially available plates for fixation of the scapula. The authors describe 2 cases of scapula fracture and 1 scapula osteotomy that were managed with internal fixation using low-profile mesh plates. The mesh plate is a stainless steel lattice that can be molded and trimmed to create a plate that matches the unusual 3-dimensional anatomy of the scapula. It accepts 2.4/2.7 mm cortical and variable angle locking screws which can be varied up to 15 degrees. We present our experience managing these complex cases, and how the use of the mesh plates facilitated the procedure. No complications were recorded and at final follow-up patients regained satisfactory shoulder function

During the past decade, total knee arthroplasty (TKA) has been markedly increased. Recently, patient-specific custom cutting guides have been commercially introduced in order to achieve an accurate component alignment during TKA. In fact, these cutting blocks are specific to a patient’s knee anatomy and should help the surgeons to perform bone cuts, reducing the complexity of conventional alignment and sizing tools. Nevertheless, there are critical arguments against patient-specific cutting guides for routine use, such as poor evidence and higher costs. Additionally, there are still no mild and long-term results available that describe the clinical outcomes following patient-specific instrumentation of TKR, cost-effectiveness and lower revision rates. Aim of the current manuscript was to describe the recent improvements of the surgical technique and instrumentation of TKA, reviewing the recent literature concerning the PSI technology.

Patellar fractures are relatively uncommon, accounting for approximately 1% of all fractures. Non-operative treatment represents the best choice for undisplaced patellar fractures. However, surgery becomes necessary when fractures are displaced by more than 2 mm, and may include open reduction and internal fixation. Accurate reduction and rigid fixation are required in order to allow early knee mobilization and to obtain a better clinical outcome. Several techniques have been described for patellar fracture fixation, such as tension band wiring, interfragmentary screw fixation, and the combination of screw fixation and cerclage. In this article up-to-date diagnosis, classification and treatment of patellar fractures are discussed. Furthermore, the authors briefly describe their preferred methods for the management of patellar fractures using non-absorbable suture.