Search

Epitaxially-fused superlattices of colloidal quantum dots (QD epi-SLs) may exhibit electronic minibands and high-mobility charge transport, but electrical measurements of epi-SLs have been limited to large-area, polycrystalline samples in which superlattice grain boundaries and intragrain defects suppress/obscure miniband effects. Systematic measurements of charge transport in individual, highly-ordered epi-SL grains would facilitate the study of minibands in QD films. Here, we demonstrate the air-free fabrication of microscale field-effect transistors (μ-FETs) with channels consisting of single PbSe QD epi-SL grains (2-7 μm channel dimensions) and analyze charge transport in these single-grain devices. The eight devices studied show p-channel or ambipolar transport with a hole mobility as high as 3.5 cm2 V-1 s-1 at 290 K and 6.5 cm2 V-1 s-1 at 170-220 K, one order of magnitude larger than that of previous QD solids. The mobility peaks at 150-220 K, but device hysteresis at higher temperatures makes the true mobility-temperature curve uncertain and evidence for miniband transport inconclusive.

Highly ordered epitaxially fused colloidal quantum dot (QD) superlattices (epi-SLs) promise to combine the size-tunable photophysics of QDs with the efficient charge transport of bulk semiconductors. However, current epi-SL fabrication methods are crude and result in structurally and chemically inhomogeneous samples with high concentrations of extended defects that localize carriers and prevent the emergence of electronic mini-bands. Needed fabrication improvements are hampered by inadequate understanding of the ligand chemistry that causes epi-SL conversion from the unfused parent SL. Here we show that epi-SL formation by the conventional method of amine injection into an ethylene glycol subphase under a floating QD film occurs by deprotonation of glycol by the amine and subsequent exchange of oleate by glycoxide on the QD surface. By replacing the amine with hydroxide ion, we demonstrate that any Brønsted-Lowry base that creates a sufficient dose of glycoxide can produce the epi-SL. We then introduce an epi-SL fabrication method that replaces point injection of a base with contactless and uniform illumination of a dissolved photobase. Quantitative mapping of multilayer (3D) films shows that our photobase-made epi-SLs are chemically and structurally uniform and have much lower concentrations of bulk defects compared to the highly inhomogeneous and defect-rich epi-SLs produced by amine point injection. The structural-chemical uniformity and structural perfection of photobase-made epi-SLs make them leading candidates for achieving emergent mini-band charge transport in a self-assembled mesoscale solid.

Quantum coupling in arrayed nanostructures can produce novel mesoscale properties such as electronic minibands to improve the performance of optoelectronic devices, including ultra-efficient solar cells and infrared photodetectors. Colloidal PbSe quantum dots (QDs) that self-assemble into epitaxially-fused superlattices (epi-SLs) are predicted to exhibit such collective phenomena. Here, we show the emergence of distinct local electronic states induced by crystalline necks that connect individual PbSe QDs and modulate the bandgap energy across the epi-SL. Multi-probe scanning tunneling spectroscopy shows bandgap modulation from 0.7 eV in the QDs to 1.1 eV at their necks. Complementary monochromated electron energy-loss spectroscopy demonstrates bandgap modulation in spectral mapping, confirming the presence of these distinct energy states from necking. The results show the modification of the electronic structure of a precision-made nanoscale superlattice, which may be leveraged in new optoelectronic applications.

The efficiency of nanoparticle (NP) solar cells has grown impressively in recent years, exceeding 16%. However, the carrier mobility in NP solar cells, and in other optoelectronic applications remains low, thus critically limiting their performance. Therefore, carrier transport in NP solids needs to be better understood to further improve the overall efficiency of NP solar cell technology. However, it is technically challenging to simulate experimental scale samples, as physical processes from atomic to mesoscopic scales all crucially impact transport. To rise to this challenge, here we report the development of TRIDENS: the Transport in Defected Nanoparticle Solids Simulator, that adds three more hierarchical layers to our previously developed HINTS code for nanoparticle solar cells. In TRIDENS, we first introduced planar defects, such as twin planes and grain boundaries into individual NP SLs superlattices (SLs) that comprised the order of 103 NPs. Then we used HINTS to simulate the transport across tens of thousands of defected NP SLs, and constructed the distribution of the NP SL mobilities with planar defects. Second, the defected NP SLs were assembled into a resistor network with more than 104 NP SLs, thus representing about 107 individual NPs. Finally, the TRIDENS results were analyzed by finite size scaling to explore whether the percolation transition, separating the phase where the low mobility defected NP SLs percolate, from the phase where the high mobility undefected NP SLs percolate drives a low-mobility-to-highmobility transport crossover that can be extrapolated to genuinely macroscopic length scales. For the theoretical description, we adapted the Efros-Shklovskii bimodal mobility distribution percolation model. We demonstrated that the ES bimodal theory's two-variable scaling function is an effective tool to quantitatively characterize this low-mobility-to-high-mobility transport crossover.

The authors regret the following minor errors in the published article: In Section 2.1 (Materials), two chemicals, lead iodide and ethanol, were accidentally omitted from the list. The revised text should read:

The emerging technology of colloidal quantum dot electronics provides an opportunity for combining the advantages of well-understood inorganic semiconductors with the chemical processability of molecular systems. So far, most research on quantum dot electronic devices has focused on materials based on Pb- and Cd chalcogenides. In addition to environmental concerns associated with the presence of toxic metals, these quantum dots are not well suited for applications in CMOS circuits due to difficulties in integrating complementary n- and p-channel transistors in a common quantum dot active layer. Here, we demonstrate that by using heavy-metal-free CuInSe2 quantum dots, we can address the problem of toxicity and simultaneously achieve straightforward integration of complimentary devices to prepare functional CMOS circuits. Specifically, utilizing the same spin-coated layer of CuInSe2 quantum dots, we realize both p- and n-channel transistors and demonstrate well-behaved integrated logic circuits with low switching voltages compatible with standard CMOS electronics.

Three dimensional epitaxially-fused colloidal quantum dot (QD) superlattices (epi-SLs) feature exceptional electronic coupling and spatial order and are promising systems for studying the emergence of delocalized states and mini-band charge transport in self-assembled solids. However, energy disorder arising from structural defects and aperiodicity has so far resulted in charge carrier localization and slow hopping transport. Detailed 3D structural characterization is critical for rationally improving epi-SL structural perfection to trigger the formation of mini-bands. Here, we analyze the 3D structure of a 120 × 38 nm disc-shaped region of a PbSe QD epi-SL using full-tilt high-angle annular dark-field electron tomography. The high spatial resolution of the tomographic reconstruction (0.65 nm) enables determination of the center-of-mass coordinates of all 1846 QDs in the sample as well as the size and shape of the thousands of epitaxial connections (necks) between the QDs. The tomogram reveals the detailed crystallography and internal positional disorder of the three SL grains that constitute this sample. A map of the neck network is used to quantify relationships between neck number (the number of necks each QD possesses), average neck diameter, QD location in the film, and the nearest neighbor inter-QD distance and distance distribution. We find a strong positive correlation between neck number and local spatial order, suggesting that future improvements in neck connectivity are likely to simultaneously enhance the overall structural perfection of the epi-SLs. A kinetic Monte Carlo model is employed to estimate the electron mobility of the tomography sample and assess the impact of grain boundaries on charge transport. Our electron tomography study establishes a baseline for the quantitative statistical analysis of structural defects in 3D QD epi-SLs.

Oriented attachment of nanocrystals is an important route to constructing epitaxially-connected nanocrystal superlattices for various applications. During oriented attachment of semiconductor nanocrystals, neck can be formed between nanocrystals and it strongly influences the properties of the resulting superlattice. However, the neck formation mechanism is poorly understood. Here, we use in situ liquid cell transmission electron microscopy to directly observe the initiation and growth of homoepitaxial necks between PbSe nanocrystals with atomic details. We find that neck initiation occurs slowly (~ 10 s) when two nanocrystals approach to each other within an edge-to-edge distance of 0.6 nm. During neck initiation, Pb and Se atoms defuse from other facets into the gap, forming “dynamic reversible” filaments. Once the filament (neck) width is larger than a critical size of 0.9 nm, it gradually (15 s) widens into a 3-nm-wide neck. The atomic structure of the neck is further obtained using ex situ aberration-corrected scanning TEM imaging. Neck initiation and growth mechanisms are elucidated with density functional theory calculations. Our direct unveiling of the atomic pathways of neck formation during oriented attachment shed light into the fabrication of nanocrystal superlattices with improved structural order and electronic properties. [Figure not available: see fulltext.].

The behavior of individual nanocrystals during superlattice phase transitions can profoundly affect the structural perfection and electronic properties of the resulting superlattices. However, details of nanocrystal morphological changes during superlattice phase transitions are largely unknown due to the lack of direct observation. Here, we report the dynamic deformability of PbSe semiconductor nanocrystals during superlattice phase transitions that are driven by ligand displacement. Real-time high-resolution imaging with liquid-phase transmission electron microscopy reveals that following ligand removal, the individual PbSe nanocrystals experience drastic directional shape deformation when the spacing between nanocrystals reaches 2 to 4 nm. The deformation can be completely recovered when two nanocrystals move apart or it can be retained when they attach. The large deformation, which is responsible for the structural defects in the epitaxially fused nanocrystal superlattice, may arise from internanocrystal dipole-dipole interactions.

Meaningful action on climate change requires affective engagement with the human impacts of the problem. The Last Hurrah (and The Long Haul) project was developed using theatrical storytelling as a tool to provoke thought and empathy about the lived experience of climate change. Over a period of 3 years, a company of Acting students and their lecturer worked with faculty and students from a Geography department to explore climate change stories and the physical and human geographies that shape their impacts. This paper reflects on the process, highlighting opportunities and challenges for Geographers to become involved in interdisciplinary teaching and creative engagement as part of a more holistic approach to wicked problems, and explores the impact of the learning experience with the students involved. We conclude that storytelling is profoundly suited to overcoming the psychological barriers that can stand in the way of appreciating and empathizing with the implications for everyday life of an altered climate system. Recommendations are made for future interdisciplinary education projects using creative arts to address global challenges.

We report on synthesis and investigation of nanocrystalline cobalt-iron-pyrites with an emphasis on nanocrystal structure, morphology and magnetic behavior. The nanocrystals (NCs) were 5-25 nm in diameter as characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). With an increase in Fe fraction, X-ray diffraction and small-angle-X-ray scattering (SAXS) showed a systematic decrease in lattice constant, primary grain/NC size (15 to 7 nm), and nanoparticle (NP) size (70 to 20 nm), respectively. The temperature dependence of the DC magnetization and AC susceptibility versus frequency revealed a number of magnetic phases in Co x Fe1-xS2. Samples with x = 1 and x = 0.875-0.625 showed evidence of superspin glass (SSG) behavior with embedded ferromagnetic (FM) clusters of NPs. For x = 0.5, samples retained their mixed phases, but showed superparamagnetic (SPM) behavior with antiferromagnetic clusters suppressing magnetic dipolar interactions. Below x = 0.5, the pyrites show increasing paramagnetic character. We construct a phase diagram, which can be understood in terms of competition between the various dipolar, exchange, inter- and intracluster interactions. Our results suggest that NC size and shape can be tuned to engineer spin-polarized ferromagnetism of n-doped iron pyrite.

We report on synthesis and investigation of nanocrystalline cobalt-iron-pyrites with an emphasis on nanocrystal structure, morphology and magnetic behavior. The nanocrystals (NCs) were 5-25 nm in diameter as characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). With an increase in Fe fraction, X-ray diffraction and small-angle-X-ray scattering (SAXS) showed a systematic decrease in lattice constant, primary grain/NC size (15 to 7 nm), and nanoparticle (NP) size (70 to 20 nm), respectively. The temperature dependence of the DC magnetization and AC susceptibility versus frequency revealed a number of magnetic phases in Co x Fe1-xS2. Samples with x = 1 and x = 0.875-0.625 showed evidence of superspin glass (SSG) behavior with embedded ferromagnetic (FM) clusters of NPs. For x = 0.5, samples retained their mixed phases, but showed superparamagnetic (SPM) behavior with antiferromagnetic clusters suppressing magnetic dipolar interactions. Below x = 0.5, the pyrites show increasing paramagnetic character. We construct a phase diagram, which can be understood in terms of competition between the various dipolar, exchange, inter- and intracluster interactions. Our results suggest that NC size and shape can be tuned to engineer spin-polarized ferromagnetism of n-doped iron pyrite.

Field-effect transistors (FETs) made from colloidal quantum dot (QD) solids commonly suffer from current–voltage hysteresis caused by the bias-stress effect (BSE), which complicates fundamental studies of charge transport in QD solids and the use of QD FETs in electronics. Here, we show that the BSE can be eliminated in n-channel PbSe QD FETs by first removing the QD ligands with a dose of H2S gas and then infilling the QD films with alumina by atomic layer deposition (ALD). The H2S-treated, alumina-infilled FETs have stable, hysteresis-free device characteristics (total short-term stability), indefinite air stability (total long-term stability), and a high electron mobility of up to 14 cm2 V−1 s−1, making them attractive for QD circuitry and optoelectronic devices. The BSE-free devices are utilized to conclusively establish the dependence of the electron mobility on temperature and QD diameter. We demonstrate that the BSE in these devices is caused by both electron trapping at the QD surface and proton drift within the film. The H2S/alumina chemistry produces ligand-free PbSe/PbS/Al2O3 interfaces that lack the traps that cause the electronic part of the BSE, while full alumina infilling stops the proton motion responsible for the ionic part of the BSE. Our matrix engineering approach should aid efforts to eliminate the BSE, boost carrier mobilities, and improve charge transport in other types of nanocrystal solids. [ABSTRACT FROM AUTHOR]

The structure of macromolecules and their complexes dictate their biological function. In "footprinting", the solvent accessibility of the residues that constitute proteins, DNA and RNA can be determined from their reactivity to an exogenous reagent such as the hydroxyl radical (·OH). While ·OH generation for protein footprinting is achieved by radiolysis, photolysis and electrochemistry, we present a simpler solution. A thin film of pyrite (cubic FeS2) nanocrystals deposited onto a shape memory polymer (commodity shrink-wrap film) generates sufficient ·OH via Fenton chemistry for oxidative footprinting analysis of proteins. We demonstrate that varying either time or H2O2 concentration yields the required ·OH dose-oxidation response relationship. A simple and scalable sample handling protocol is enabled by thermoforming the "pyrite shrink-wrap laminate" into a standard microtiter plate format. The low cost and malleability of the laminate facilitates its integration into high throughput screening and microfluidic devices.

Carrier multiplication, the generation of multiple electron-hole pairs by a single photon, is of great interest for solar cells as it may enhance their photocurrent. This process has been shown to occur efficiently in colloidal quantum dots, however, harvesting of the generated multiple charges has proved difficult. Here we show that by tuning the charge-carrier mobility in quantum-dot films, carrier multiplication can be optimized and may show an efficiency as high as in colloidal dispersion. Our results are explained quantitatively by the competition between dissociation of multiple electron-hole pairs and Auger recombination. Above a mobility of ~1 cm(2) V(-1) s(-1), all charges escape Auger recombination and are quantitatively converted to free charges, offering the prospect of cheap quantum-dot solar cells with efficiencies in excess of the Shockley-Queisser limit. In addition, we show that the threshold energy for carrier multiplication is reduced to twice the band gap of the quantum dots.

The article focuses on six principles of crisis and emergency risk communication (CERC) which can be applied by occupational safety and health (OSH) professionals that can use for successful risk communication to mitigate harm to people, property and the environment. It states that the COVID-19 pandemic highlighted challenges in risk communication including the role of social media, the promulgation of misinformation, and addressing psychological and mental health in an emergency.

The construction and performance of dye-sensitized solar cells (DSCs) based on arrays of ZnO nanowires coated with thin shells of amorphous Al2O3 or anatase Tio2 by atomic layer deposition is described. Results reveal that alumina shells of all thicknesses act as insulating barriers that improve cell open-circuit voltage only at expense of a larger decrease in short-circuit current density.