Search

Recent theoretical and experimental findings suggest that the long-known but not well understood low temperature resistance plateau of SmB6 may originate from protected surface states arising from a topologically non-trivial bulk band structure having strong Kondo hybridization. Yet other studies have ascribed this feature to impurity phases, sample vacancies, and surface reconstructions. Given the typical methods used to prepare SmB6 single crystals, the flux and floating zone procedures, these ascriptions should not be taken lightly. Here, we demonstrate how compositional variations and observable amounts of impurity phases in SmB6 crystals grown by floating zone and flux affect the physical properties. From neutron diffraction and X-ray computed tomography experiments, we observe that a 154Sm11B6 crystal prepared using aluminum flux contains co-crystallized, epitaxial aluminum. A large, nearly stoichiometric crystal of SmB6 was successfully grown using the float-zone technique; upon continuing the zone melting, samarium vacancies are introduced. These samarium vacancies drastically alter the resistance and plateauing magnitude of the low temperature resistance compared to stoichiometric SmB6. These results highlight that small presences of impurity phases and compositional variations must be considered when collecting and analyzing physical property data of SmB6. Finally, a more accurate samarium-154 coherent neutron scattering length value, 8.9(1) fm, is reported.

The variation of remotely sensed neutron count rates is measured as a function of cratercentric distance using data from the Lunar Prospector Neutron Spectrometer. The count rate, stacked over many craters, peaks over the crater centre, has a minimum near the crater rim, and at larger distances, it increases to a mean value that is up to 1% lower than the mean count rate observed over the crater. A simple model is presented, based upon an analytical topographical profile for the stacked craters fitted to data from the Lunar Orbiter Laser Altimeter (LOLA). The effect of topography coupled with neutron beaming from the surface largely reproduces the observed count rate profiles. However, a model that better fits the observations can be found by including the additional freedom to increase the neutron emissivity of the crater area by ~0.35% relative to the unperturbed surface. It is unclear what might give rise to this effect, but it may relate to additional surface roughness in the vicinities of craters. The amplitude of the crater-related signal in the neutron count rate is small, but not too small to demand consideration when inferring water-equivalent hydrogen (WEH) weight percentages in polar permanently shaded regions (PSRs). If the crater-wide count rate excess is concentrated into a much smaller PSR, then it can lead to a significantly biased inferred WEH weight percentage. For instance, it may increase the inferred WEH for Cabeus crater at the Moon's South Pole from ~1% to ~4%., Comment: 14 pages, 13 figures, minor changes to match published version

It is generally accepted that the main cause of ultracold neutron (UCN) losses in storage traps is the upscattering to the thermal energy range by hydrogen adsorbed on the surface of the trap walls. However, the data on which this conclusion is based are poor and contradictory. Here, we report a measurement, performed at the Los Alamos National Laboratory UCN source, of the average energy of the flux of upscattered neutrons after the interaction of UCN with hydrogen bound in semicrystalline polymer PMP (tradename TPX), [C$_{6}$H$_{12}$]$_n$. Our analysis, performed with the MCNP code based on the application of the neutron scattering law to UCN upscattered by bound hydrogen in semicrystalline polyethylene, [C$_{2}$H$_{4}$]$_n$, leads us to a flux average energy value of 26$\pm3$ meV in contradiction with previously reported experimental values of 10 to 13 meV and in agreement with the theoretical models of neutron heating implemented in the MCNP code.

Using neutron scattering, we investigate the static and dynamic structure functions $S(Q,\omega)$ of 3 distinct solid phases (using powder average techniques), and characterize the corresponding modes of energy excitation, focusing primarily on the dynamics of spin interaction. With the $S(Q,\omega)$ maps, we extract the temperature dependent production rate and upscattering cross section, that are relevant for understanding experimental data on ultracold neutron production in solid oxygen at the saturated vapor pressure., Comment: 11 pages, 12 figures

We present experimental data on ultracold neutron (UCN) production in solid oxygen from 5 K to 50 K. The experiment used 3 cells of different dimensions in order to study the excess UCN elastic scattering in s-O$_2$ due to source density non-uniformities. We present a combined $\chi^2$ analysis with the aid of Monte-Carlo simulations which contain the detailed physics of UCN transport as well as cold neutron attenuation. The results validate the UCN production and upscattering cross-sections extracted from the dynamic structure function derived from inelastic neutron scattering, and illustrate the role of magnetic scattering in enhancing UCN production in s-O$_2$., Comment: 5 pages, 5 figures

This paper presents a calculation of the neutron cross-sections in solid materials (used in practical neutron sources) with a large coherent scattering contribution. In particular, the dynamic structure function S(Q, $\omega$) of polycrystalline ortho-D$_2$ is evaluated using a Monte-Carlo calculation that performs an average over scattering angles relative to crystal axes in random orientations. This method uses an analytical dispersion function with force constants derived from neutron scattering data of single crystal D$_2$ in the framework of an axially symmetric force tensor. The resulting two dimensional map of S(Q, $\omega$) captures details of the phonon branches as well as the molecular rotations, that can be compared directly to data from inelastic neutron scattering on polycrystalline D$_2$. This high resolution information is used to calculate the absolute cross-sections of production and upscattering loss of ultracold neutron (UCN). The resulting scattering cross-sections are significantly different, especially for UCN upscattering, from the previous predictions using the approach centered on the incoherent approximation.

We present the results of an Ultracold neutron (UCN) production experiment in a pulsed neutron beam line at the Los Alamos Neutron Scattering Center. The experimental apparatus allows for a comprehensive set of measurements of UCN production as a function of target temperature, incident neutron energy, target volume, and applied magnetic field. However, the low counting statistics of the UCN signal expected can be overwhelmed by the large background associated with the scattering of the primary cold neutron flux that is required for UCN production. We have developed a background subtraction technique that takes advantage of the very different time-of-flight profiles between the UCN and the cold neutrons, in the pulsed beam. Using the unique timing structure, we can reliably extract the UCN signal. Solid ortho-D$_2$ is used to calibrate UCN transmission through the apparatus, which is designed primarily for studies of UCN production in solid O$_2$. In addition to setting the overall detection efficiency in the apparatus, UCN production data using solid D$_2$ suggest that the UCN upscattering cross-section is smaller than previous estimates, indicating the deficiency of the incoherent approximation widely used to estimate inelastic cross-sections in the thermal and cold regimes.

The Low Energy Neutron Source (LENS) is an accelerator-based pulsed cold neutron facility under construction at the Indiana University Cyclotron Facility (IUCF). The idea behind LENS is to produce pulsed cold neutron beams starting with ~MeV neutrons from (p,n) reactions in Be which are moderated to meV energies and extracted from a small solid angle for use in neutron instruments which can operate efficiently with relatively broad (~1 msec) neutron pulse widths. Although the combination of the features and operating parameters of this source is unique at present, the neutronic design possesses several features similar to those envisioned for future neutron facilities such as long-pulsed spallation sources (LPSS) and very cold neutron (VCN) sources. We describe the underlying ideas and design details of the target/moderator/reflector system (TMR) and compare measurements of its brightness, energy spectrum, and emission time distribution under different moderator configurations with MCNP simulations. Brightness measurements using an ambient temperature water moderator agree with MCNP simulations within the 20% accuracy of the measurement. The measured neutron emission time distribution from a solid methane moderator is in agreement with simulation and the cold neutron flux is sufficient for neutron scattering studies of materials. We describe some possible modifications to the existing design which would increase the cold neutron brightness with negligible effect on the emission time distribution., Comment: This is a preprint version of an article which has been published in Nuclear Instruments and Methods in Physics Research A 587 (2008) 324-341. http://dx.doi.org/10.1016/j.nima.2007.12.044