Search

Grapes’ infection with the fungi Botrytis cinerea is one of the major causes of economic loss in the winemaking sector worldwide. The laccase activity of grapes is considered an appropriate indicator of this type of fungal infection, and enzymatic activity higher than 3 U/mL indicates a high risk of irreversibly damaged grape must due to enzymatic browning. This work describes a fast test for the measurement of laccase activity based on a dual optical and electrochemical detection method. A paper sensor impregnated with the enzymatic substrate dye 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) provides a semi-quantitative optical measurement. While the paper sensor can be used independently, when combined with a screen-printed electrode and amperometry measurements, it enables the quantitative detection of laccase activities down to 0.4 U/mL in only 5 min. The method was applied for monitoring the artificial infection of white, rosé, and red grapes with different strains of Botrytis cinerea. The results were confirmed by parallel analysis using the spectrophotometric method of laccase activity determination based on syringaldazine. The influence of the fungal strain and type of grape on laccase activity levels is reported. The demonstrated robustness, simplicity, and versatility of the developed method make it ideal for application on-site in the vineyard or at grape processing points. Financial support provided by the Romanian Executive Agency for Higher Education, Research, Development and Innovation (UEFISCDI), ERANET-MANUNET-III-WINBIOTOOL-2, contract 151/9.03.2020 grant (for A.V), contract150/9.03.2020 (for P.E) and contract 152/9.03.2020 (for C.P. (Catalina Pantazi), E.B., and M.I.); the Romanian Academy grant RO1567-IBB05/2021 (for R.R. and C.P. (Cristina Purcarea)); the Basque Government and the European Union through the European regional development fund 2014–2020 (FEDER) (ZL-2020/00532 and ZL-2021/00340); and the Diputación Foral de Álava (ALAVA INNOVA program—INNOEM-2020/00045) for Bodegas de los Herederos del Marqués de Riscal; and the Diputación Foral de Álava (ALAVA INNOVA program— INNOEM-2020/00045) for Bodegas de los Herederos del Marqués de Risca is gratefully acknowledged.

The establishment of a sustainable circular bioeconomy requires the effective material recycling from biomass and biowaste beyond composting/fertilizer or anaerobic digestion/bioenergy. Recently, volatile fatty acids attracted much attention due to their potential application as carbon source for the microbial production of high added-value products. Their low-cost production from different types of wastes through dark fermentation is a key aspect, which will potentially lead to the sustainable production of fuels, materials or chemicals, while diminishing the waste volume. This article reviews the utilization of a volatile fatty acid platform for the microbial production of polyhydroxyalkanoates, single cell oil and omega-3 fatty acids, giving emphasis on the fermentation challenges for the efficient implementation of the bioprocess and how they were addressed. These challenges were addressed through a research project funded by the European Commission under the Horizon 2020 programme entitled 'VOLATILE-Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks'., This work was supported by the European project 'Volatile-Biowaste-derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks' and has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 720777.

The present study focuses on the effects of heat and neutralization treatments on solubility, water vapour permeability and antimicrobial activity of chitosan (Ch) and chitosan/chitooligosaccharide (ChO)-based films. ChO films showed stronger antimicrobial activity against Escherichia coli, Bacillus cereus, Staphylococcus aureus, Serratia liquefaciens and Lactobacillus plantarum than Ch films, indicating that this effect is attributed to the presence of chitooligosaccharides (COS) in the films. Heat and neutralization treatments decreased significantly the solubility of chitosan films and gave rise to a sharp loss in their antimicrobial activity. The incorporation of COS in chitosan films increased the inhibitory effect against the studied microorganisms without affecting significantly the water vapour permeability of the films. Thus, it is possible to get a more insoluble chitosan film with high antimicrobial activity by means of incorporation of COS combined with heat or neutralization treatments. MINECO, project (MAT2010-21621-C02-01)

Volatile Fatty Acids (VFA) are small organic compounds that have attracted much attention lately, due to their use as a carbon source for microorganisms involved in the production of bioactive compounds, biodegradable materials and energy. Low cost production of VFA from different types of waste streams can occur via dark fermentation, offering a promising approach for the production of biofuels and biochemicals with simultaneous reduction of waste volume. VFA can be subsequently utilized in fermentation processes and efficiently transformed into bioactive compounds that can be used in the food and nutraceutical industry for the development of functional foods with scientifically sustained claims. Microalgae are oleaginous microorganisms that are able to grow in heterotrophic cultures supported by VFA as a carbon source and accumulate high amounts of valuable products, such as omega-3 fatty acids and exopolysaccharides. This article reviews the different types of waste streams in concert with their potential to produce VFA, the possible factors that affect the VFA production process and the utilization of the resulting VFA in microalgae fermentation processes. The biology of VFA utilization, the potential products and the downstream processes are discussed in detail. VOLATILE, a project funded by the European Union’s Horizon 2020 research and innovation program, under the grant agreement no. 720777. The Greek State Scholarships (Postdoc-Research Scholarships IKY). The Hellenic Foundation of Research and Innovation (ELIDEK) financial support (ELIDEK Scholarships for Ph.D. Students).

The continuously growing number of short-life electronics equipment inherently results in a massive amount of problematic waste, which poses risks of environmental pollution, endangers human health, and causes socioeconomic problems. Hence, to mitigate these negative impacts, it is our common interest to substitute conventional materials (polymers and metals) used in electronics devices with their environmentally benign renewable counterparts, wherever possible, while considering the aspects of functionality, manufacturability, and cost. To support such an effort, in this study, we explore the use of biodegradable bioplastics, such as polylactic acid (PLA), its blends with polyhydroxybutyrate (PHB) and composites with pyrolyzed lignin (PL), and multiwalled carbon nanotubes (MWCNTs), in conjunction with processes typical in the fabrication of electronics components, including plasma treatment, dip coating, inkjet and screen printing, as well as hot mixing, extrusion, and molding. We show that after a short argon plasma treatment of the surface of hot-blown PLA-PHB blend films, percolating networks of single-walled carbon nanotubes (SWCNTs) having sheet resistance well below 1 kω/□ can be deposited by dip coating to make electrode plates of capacitive touch sensors. We also demonstrate that the bioplastic films, as flexible dielectric substrates, are suitable for depositing conductive micropatterns of SWCNTs and Ag (1 kω/□ and 1 ω/□, respectively) by means of inkjet and screen printing, with potential in printed circuit board applications. In addition, we exemplify compounded and molded composites of PLA with PL and MWCNTs as excellent candidates for electromagnetic interference shielding materials in the K-band radio frequencies (18.0-26.5 GHz) with shielding effectiveness of up to 40 and 46 dB, respectively. Business Finland (project 1212/31/2020, All green structural electronics), EU Horizon 2020 BBI JU (project 792261, NewPack), and EU Interreg Nord Lapin liitto (project 20201468, Flexible transparent conductive f ilms as electrodes) and Academy of Finland (project 316825, Nigella).