Search

Nanoparticulate metal solfides such as ZnS can influence the transport and bioavailability of pollutant metals in anaerobic environments. The aim of this work was to investigate how the composition of dissolved natural organic matter (NOM) influences the stability of zinc sulfide nanopartides as they nucleate and aggregate in water with dissolved NOM. We compared NOM fractions that were isolated from several surface waters and represented a range of characteristics including molecular weight, type of carbon, and ligand density. Dynamic light scattering was employed to monitor the growth and aggregation of Zn— S —NOM nanoparticles in supersaturated solutions containing dissolved aquatic humic substances. The NOM was observed to reduce particle growth rates, depending on solution variables such as type and concentration of NOM, monovalent electrolyte concentration, and pH. The rates of growth increased with increasing ionic strength, indicating that observed growth rates primarily represented aggregation of charged Zn —S —NOM particles. Furthermore, the observed rates decreased with increasing molecular weight and aromatic content of the NOM fractions, while carboxylate and reduced sulfur content had little effect. Differences between NOM were likely due to properties that increased electrosteric hindrances for aggregation. Overall, results of this study suggest that the composition and source of NOM are key factors that contribute to the stabilization and persistence of zinc sulfide nanoparticles in the aquatic environment. [ABSTRACT FROM AUTHOR]

This review summarizes the literature related to agricultural wastes published during 2008. This review is divided into the following sections: waste characterization, waste management and pollution minimization, waste treatment, and waste recycle and reuse. [ABSTRACT FROM AUTHOR]

As the final barrier before consumption, properly designed and operated point-of-use water treatment systems like carbon block filters are useful in protecting public health. This article evaluates the relative importance of adsorptive filtration, straining filtration, and cake filtration in the removal of nominal test dust (NTD) and latex microspheres, the latter being a Cryptosporidium oocyst surrogate, by carbon block filtration. Three different carbon blocks were tested, and only one of these was able to pass a National Sanitation Foundation (NSF) certification test. Surface charge characteristics can explain why two carbon blocks failed the test; however, they cannot explain why one carbon block passed the test. Scanning electron microscopy and energy dispersive X-ray spectroscopy results together with the use of particle size distributions confirmed a lack of NTD penetration into the successful carbon block and suggest that cake filtration was the dominant NTD removal mechanism in this carbon block. Particle size analysis revealed that D15 appears to be one of the determining factors in the passing the NSF certification test. [ABSTRACT FROM AUTHOR]

Rational optimization of nanoparticle (NP) surfaces is essential for successful conjugation of proteins to NPs for numerous applications. Using surface-roughened NPs (SRNPs) and quasi-spherical NPs (QSNPs) as two model nanostructures, we examined the effects of local surface curvature on protein conformation and interfacial behaviors by circular dichroism (CD) spectroscopy, fluorescence emission spectroscopy (FES), and isothermal titration calorimetry (ITC). The surface of SRNPs consisted of a mixture of undercoordinated and close-packed surface atoms at the highly curved and locally flat surface regions, respectively, whereas QSNPs were primarily enclosed by {100} and {111} facets covered with close-packed surface atoms. Our findings demonstrated that: 1) SRNPs possess higher tendency to denature BSA and accommodate a higher number of BSA molecules on the surface and 2) the aggregation of AuNP-BSA complexes, likely induced by either denatured BSA or reduced electrostatic repulsion between complexes, is dependent on both the BSA concentration and the NP surface curvature. This study also indicated that NP local surface curvature could potentially be used as a design strategy to preserve the biological function of proteins., Competing Interests: Declaration of Competing Interest There are no conflicts to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

To maintain osmotic balance, cells usually produce neutral solutes (i.e., osmolytes), together with charged species to cope with salinity stress. Osmolytes are known to be important in stabilizing/destabilizing macromolecules (e.g., proteins) via depletion /accumulation around their surfaces. To better understand the physiological fate of nanoparticles (NPs), we investigated the effect of osmolytes [(urea and trimethylamine N-oxide (TMAO)] and specific anions (NO 3 - and F - ) on the interactions between NPs and supported lipid bilayers (SLBs). Carboxylated polystyrene NPs (60 nm) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were chosen as model NPs and lipid. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to quantify NP deposition dynamics. Microscale thermophoresis (MST) was used to characterize the affinity between DOPC vesicles (or NPs) and osmolytes. Our results show that osmolytes are capable of protecting SLBs from NP-induced disruption. Upon NP deposition onto supported vesicle layers (SVLs), the leakage of encapsulated dyes decreased with the addition of osmolytes. The combination of kosmotropes (TMAO and F - ) are more efficient than that of chaotropes (urea and NO 3 - ) in weakening the hydrophobic interaction between NPs and SLBs by preferential binding to NPs and/or SLBs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Background: Nanomaterials (NMs) are often exposed to a broad range of biomolecules of different abundances. Biomolecule sorption driven by various interfacial forces determines the surface structure and composition of NMs, subsequently governs their functionality and the reactivity of the adsorbed biomolecules. Isothermal titration calorimetry (ITC) is a nondestructive technique that quantifies thermodynamic parameters through in-situ measurement of the heat absorption or release associated with an interaction., Scope of Review: This review highlights the recent applications of ITC in understanding the thermodynamics of interactions between various nanoparticles (NPs) and biomolecules. Different aspects of a typical ITC experiment that are crucial for obtaining accurate and meaningful data, as well as the strengths, weaknesses, and challenges of ITC applications to NP research were discussed., Major Conclusions: ITC reveals the driving forces behind biomolecule-NP interactions and the effects of the physicochemical properties of both NPs and biomolecules by quantifying the crucial thermodynamics parameters (e.g., binding stoichiometry, ΔH, ΔS, and ΔG). Complimentary techniques would strengthen the interpretation of ITC results for a more holistic understanding of biomolecule-NP interactions., General Significance: The thermodynamic information revealed by ITC and its complimentary characterizations is important for understanding biomolecule-NP interactions that are fundamental to the biomedical and environmental applications of NMs and their toxicological effects., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Bacteria are essential components of all natural and many engineered systems. The most active fractions of bacteria are now recognized to occur as biofilms, where cells are attached and surrounded by a secreted matrix of "sticky" extracellular polymeric substances. Recent investigations have established that significant accumulation of nanoparticles (NPs) occurs in aquatic biofilms. These studies point to the emerging roles of biofilms for influencing partitioning and possibly transformations of NPs in both natural and engineered systems. While attached biofilms are efficient "sponges" for NPs, efforts to elucidate the fundamental mechanisms guiding interactions between NPs and biofilms have just begun. In this mini review, special attention is focused on NP-biofilm interactions within the aquatic environment. We highlight key physical, chemical, and biological processes that affect interactions and accumulation of NPs by bacterial biofilms. We posit that these biofilm processes present the likely possibility for unique biological and chemical transformations of NPs. Ultimately, the environmental fate of NPs is influenced by biofilms, and therefore requires a more in-depth understanding of their fundamental properties.

Silver nanoparticles (AgNPs)-alginate composite beads were synthesized using three different approaches as filler materials of packed columns for simultaneous filtration-disinfection as an alternative portable water treatment process. The prepared composite beads were packed into a column through which Escherichia coli containing water was filtered to evaluate the disinfection efficacy. Excellent disinfection performance (no detectable viable colony) was achieved with a hydraulic retention time (HRT) as short as 1 min (the shortest tested) with the SGR (Simultaneous-Gelation-Reduction) and AR (Adsorption-Reduction) beads that were prepared using in situ reduction of Ag(+). Comparatively, the SGR beads released significantly less Ag(+)/AgNPs than the AR beads did within the same HRT. From the results of this study it was identified that SGR may be the best choice among all three different synthesis approaches in that the SGR beads can achieve satisfactory bactericidal performance with a relatively low material consumption rate., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Soluble in the extracellular matrix experience a crowded environment. However, most of the biophysical studies performed to date have focused on concentrations within the dilute regime (well below the mM range). Here, we systematically studied the interaction of model cell membrane systems (giant unilamellar vesicles and supported bilayers) with soluble globular , bovine serum albumin, and lysozyme at physiologically relevant concentrations. To mimic the extracellular environment more closely, we also used fetal bovine serum as a good representative of a biomimetic mixture. We found that regardless of the used (and thus of their biological function), the interactions between a model cell membrane and these are determined by their physico-chemical characteristics, mainly their dipolar character (or charged patches). In this paper we discuss the specificity and reversibility of these interactions and their potential implications on the living cells. In particular, we report initial evidence for an additional role of in cell membranes: that of reducing the effects of non-specific of soluble on the cell membrane.

The presence of waterborne enteric pathogens in municipal water supplies contributes risk to public health. To evaluate the removal of these pathogens in drinking water treatment processes, previous researchers have spiked raw waters with up to 10(6) pathogens/L in order to reliably detect the pathogens in treated water. These spike doses are 6-8 orders of magnitude higher than pathogen concentrations routinely observed in practice. In the present study, experiments were conducted with different sampling methods (i.e., grab versus continuous sampling) and initial pathogen concentrations ranging from 10(1) to 10(6) pathogens/L. Results showed that Cryptosporidium oocyst and Giardia cyst removal across conventional treatment were dependent on initial pathogen concentrations, with lower pathogen removals observed when lower initial pathogen spike doses were used. In addition, higher raw water turbidity appeared to result in higher log removal for both Cryptosporidium oocysts and Giardia cysts.