Search

In response to the imperative for sustainable iron production with reduced CO2 emissions, this study delves into the intricate role of TiO2 in the direct reduction of iron oxide pellets. The TiO2-dependent reducibility of iron oxide pellets utilizing H2 and CO gas across varied temperatures and gas compositions is thoroughly investigated. Our findings unveil the nuanced nature of the TiO2 effect, underscored by its concentration-dependent behavior, revealing an optimal range between 1 and 1.5 pct TiO2, where a neutral or positive impact on reduction kinetics and diffusion coefficient is observed. Notably, the synergistic interplay of CO and H2 at 1000 °C emerges as particularly efficacious, suggesting complementary effects on the reduction process. The introduction of H2 into the reducing atmosphere regulated by CO not only extends the transition range but also markedly expedites the rate of reduction. Furthermore, our study highlights the temperature sensitivity of the TiO2 effect, with higher TiO2 content correlating with prolonged reduction time in a 100 pct H2 atmosphere at 900 °C. In a 100 pct H2 atmosphere, the non-contributory role of TiO2 stems from the water-gas shift reaction. Conversely, introducing H2 into a CO-controlled reducing atmosphere with TiO2 enhances the transition range and expedites the reduction rate. Additionally, our findings underscore the role of total iron content, revealing a direct correlation with the reduction process. [ABSTRACT FROM AUTHOR]

The thermo-mechanical behavior of nanosized Al2O3 particles reinforcing aluminum was analyzed in the present paper. The material was prepared by spark plasma sintering and friction stir welding. The thermal stresses affecting the composite behavior during welding were modeled through COMSOL MultiPhysics, and the results were validated by the analyses of the composites' mechanical properties. The spark-plasma-sintered materials presented limited porosity, which was taken into account during the modeling phase. Both model and experiments revealed that higher heat input is related to better material mixing during welding and sound mechanical properties. Thermal stresses lead to residual stresses close to 300 MPa in the thermo-mechanically affected zone for processing conditions of 1900 RPM and 37 mm/min. This leads to an increase in hardness up to 72 HV. [ABSTRACT FROM AUTHOR]

The article deals with the H2 consumption for different processing conditions and the composition of the processed pellets during the direct reduction process. The experiments are carried out at 600–1300 °C, with gas pressures of 1–5 bar, gas flow rates of 1–5 L min−1, and basicity indices of 0 to 2.15. Pellets with different compositions of TiO2, Al2O3, CaO, and SiO2 are analyzed. The gas flow rate is crucial, with 0–10 L min−1 leading to an H2 consumption of 0–5.1 kg H2/kg pellet. The gas pressure (0–10 bar) increases the H2 consumption from 0 to 5.1 kg H2/kg pellet. Higher temperatures (600–1300 °C) reduce H2 consumption from 5.1 to 0 kg H2/kg pellet, most efficiently at 950–1050 °C, where it decreases from 0.22 to 0.10 kg H2/kg pellet. An increase in TiO2 content from 0% to 0.92% lowers H2 consumption from 0.22 to 0.10 kg H2/kg pellet, while a higher Fe content (61–67.5%) also reduces it. An increase in SiO2 content from 0% to 3% increases H2 consumption from 0 to 5.1 kg H2/kg pellet. Porosity structure influences H2 consumption, with the average pore size decreasing from 2.83 to 0.436 mm with increasing TiO2 content, suggesting that micropores increase H2 consumption and macropores decrease it. [ABSTRACT FROM AUTHOR]