Search

An on-chip optical humidity sensor using Nano-anatase TiO2 coating is presented here. The coating material was prepared so that the result is in solution form, making the fabrication process quick and simple. Then, the solution was effortlessly spin-coated on an SU8 straight channel waveguide. Investigating the sensitivity and performance (response time) of the device revealed a great linearity in the wide range (35% to 98%) of relative humidity (RH). In addition, a variation of more than 14 dB in transmitted optical power was observed, with a response time of only ~0.7 s. The effect of coating concentration and UV treatment was examined on the performance and repeatability of the sensor. Interesting observations were found, and the attributed mechanisms were described. In addition, the proposed sensor was extensively compared with other state-of-the-art proposed counterparts from the literature and remarkable advantages were found. Since a high sensitivity of ~0.21 dB/%RH and high dynamic performances were demonstrated, this sensor is proposed for use in biomedical applications.

Ge2Sb2Se4Te1 (GSST) exhibits unprecedented broadband transparency over the infrared wavelength range and has emerged as a promising functional material in photonic applications that operate in the optical fiber telecommunication wavelength band. In this work, GSST and graphene oxide (GO) are integrated into an optical fiber link to achieve all-fiber non-volatile multilevel photonic memory. The GSST and GO (GSST-GO) duo-layer hybrid structure is sandwiched between two optical fiber ferrules, where the GO acts as a localized heat source to initiate the phase transition of GSST upon optical excitation. The GSST-GO-coated fiber exhibits a low insertion loss of 0.8 dB and a maximum readout contrast of about 32%, with at least five distinguished memory states. The response time of the device is measured in the range between 2.5 and 9.5 μs. This work serves as a proof of concept on implementing the GSST-GO duo-layer hybrid structure in optical fiber platform to realize all-fiber non-volatile multi-bit channel control or data storage. [ABSTRACT FROM AUTHOR]

Stimulated Brillouin scattering (SBS) offers optically tunable, narrowband gain and loss resonances, which makes it ideal for optical filtering and signal processing applications. However, broadband filters utilizing Brillouin scattering typically necessitate multiple pump sources or linear frequency modulated waveforms, which necessitate the use of overall high pump powers to achieve broadband and multi-band filter configurations. To overcome the trade-off between bandwidth and power consumption, we introduce an on-chip broadband bandpass filter scheme leveraging the SBS response and the concept of radio frequency interference. We present the MHz to GHz reconfigurable microwave photonic filters on a chip. The bandwidth is tunable from 30 MHz to 1.2 GHz at a total pump power of only 15 dBm, corresponding to a figure of merit (maximum bandwidth/pump power) improvement of a factor of 25 compared to previously reported work. Furthermore, the filter exhibits frequency tuning capabilities ranging from 10 to 40 GHz (X to Ka-band) and can be configured from single- to multi-bandpass filter responses and switched from bandpass to bandstop. [ABSTRACT FROM AUTHOR]

Surface acoustic wave devices are ubiquitously used for signal processing and filtering, as well as mechanical, chemical, and biological sensing and show promise as quantum transducers. While surface acoustic waves (SAWs) are primarily excited and driven using electromechanical coupling and interdigital transducers, there is a strong desire for novel methods that enable the coherent excitation and detection of SAWs all-optically interfacing with photonic integrated circuits. In this work, we numerically model and experimentally demonstrate SAW excitation in integrated photonic waveguides made from GeAsSe glass via backward stimulated Brillouin scattering (SBS). We measure a Brillouin gain coefficient of 203 W−1 m−1 for the surface acoustic resonance at 3.81 GHz, with a linewidth narrowed to 20 MHz. Experimental access to this new regime of SBS not only opens up opportunities for novel on-chip sensing applications by harnessing the waveguide surface but also paves the way for strong Brillouin interactions in materials lacking sufficient acoustic guidance in the waveguide core, as well as the excitation of SAWs in non-piezoelectric materials. [ABSTRACT FROM AUTHOR]

On‐chip stimulated Brillouin scattering (SBS) in arsenic trisulfide (As2S3) planar waveguides lead to a range of outstanding demonstrations in microwave photonics signal generation and processing. However, the lack of other integrated functionalities, high back reflections, and large in‐ and out‐fiber coupling losses in high index contrast waveguides cause a number of serious impairments and lessen the applicability of microwave photonic devices. In this report, a hybrid integration scheme is demonstrated where As2S3 waveguides optimized for SBS gain are coupled with very low losses via a vertical taper to a high index contrast and versatile germanosilicate (Ge:SiO2) platform. The Ge:SiO2 waveguide is optimally mode‐matched to commercially available high numerical aperture optical fiber to achieve very low coupling losses. The structure has very low back reflection due to the adiabatic nature of the taper and negligible refractive index difference across the fiber‐chip interface. The hybrid architecture exhibits a similar Brillouin gain coefficient to its monolithic counterpart but with an improvement of >3 dB/facet fiber‐to‐chip loss and >20 dB reduction in facet reflectivity. The hybrid structures demonstrated will bring chalcogenide‐based chip scale SBS devices closer to practical application. [ABSTRACT FROM AUTHOR]

An on-chip optical humidity sensor using Nano-anatase TiO2 coating is presented here. The coating material was prepared so that the result is in solution form, making the fabrication process quick and simple. Then, the solution was effortlessly spin-coated on an SU8 straight channel waveguide. Investigating the sensitivity and performance (response time) of the device revealed a great linearity in the wide range (35% to 98%) of relative humidity (RH). In addition, a variation of more than 14 dB in transmitted optical power was observed, with a response time of only ~0.7 s. The effect of coating concentration and UV treatment was examined on the performance and repeatability of the sensor. Interesting observations were found, and the attributed mechanisms were described. In addition, the proposed sensor was extensively compared with other state-of-the-art proposed counterparts from the literature and remarkable advantages were found. Since a high sensitivity of ~0.21 dB/%RH and high dynamic performances were demonstrated, this sensor is proposed for use in biomedical applications. [ABSTRACT FROM AUTHOR]