Search

This article describes the significant roles of process parameters in the deposition of graphene films via cobalt-catalyzed decomposition of methane diluted in hydrogen using plasma-enhanced chemical vapor deposition (PECVD). The influence of growth temperature (700-850 °C), molar concentration of methane (2%-20%), growth time (30-90 s), and microwave power (300-400 W) on graphene thickness and defect density is investigated using Taguchi method which enables reaching the optimal parameter settings by performing reduced number of experiments. Growth temperature is found to be the most influential parameter in minimizing the number of graphene layers, whereas microwave power has the second largest effect on crystalline quality and minor role on thickness of graphene films. The structural properties of PECVD graphene obtained with optimized synthesis conditions are investigated with Raman spectroscopy and corroborated with atomic-scale characterization performed by high-resolution transmission electron microscopy and scanning tunneling microscopy, which reveals formation of continuous film consisting of 2-7 high quality graphene layers. [ABSTRACT FROM AUTHOR]

We demonstrate the capability to build zero and one-dimensional electroactive molecular nanostructures ordered over a macroscopic scale and stable under ambient conditions. To realize these arrays, we use the selective grafting of functionalized thiols (juglon and terthiophene based) on a self-organized metallic template. The nanoscale patterning of the molecular conductance is demonstrated and analyzed by scanning tunneling spectroscopy. Finally, the influence of the nanostructuring on electro-chemical properties is measured, paving the way to an all-bottom-up fabrication of nanostructured templates for nanosciences. [ABSTRACT FROM AUTHOR]

The structural and magnetic properties of self-organized CoxPt1−x nanostructures grown by codeposition at room temperature on Au(1 1 1) are reported. The samples have been imaged by scanning tunnelling microscopy and characterized by x-ray magnetic circular dichroism in the same ultra-high vacuum setup. We observe that the ordered growth is preserved for a large range of Pt concentrations. The magnetization cycles as functions of the magnetic field angle and the temperature are well reproduced by a simple model, giving a good estimation of the magnetic anisotropy distributions in these assemblies of nanostructures. The initially out-of-plane anisotropy for pure Co nanostructures strongly decreases until it lies in-plane for a 40% Pt concentration. This spin reorientation transition and the measured broadening of the switching field distribution with x are discussed using a phenomenological pair model that reproduces well the main magnetic properties of CoxPt1−x epitaxial nanostructures. [ABSTRACT FROM AUTHOR]

STM investigations on the adsorption of submonolayers of large organic molecules smaller than 6 nm were carried out on copper surfaces to compare two different deposition methods: the thermal sublimation and the pulse-injection. The blue lander, a member of the lander family, could be deposited intact with the thermal procedure, therefore it was used to test the performances of the pulse-injection. On the contrary, the bis-porphyrin, which was decomposed by the thermal procedure, was deposited intact with the pulse injection. [ABSTRACT FROM AUTHOR]

Order-disorder transition of the epitaxial surface alloy of bulk immiscible elements Au1-x Fex on Ru(0001) is studied using complementary experiments of scanning tunneling microscopy and grazing incidence x-ray diffraction. For x ≃ 1/3, we evidence an apparent continuous transition towards disorder with increasing temperature from 550 to 700 K. An ordered Au2 Fe two-dimensional alloy is found to be composed of nanometer size domains of the three variants that switch to a two-dimensional solid solution with temperature. A two-levels model is developed to analyze those results which conducts to interpret this phase transition as the result of an order-disorder transition within two dimensional uncorrelated grains, or domains, with nearly fixed size. This system is a good candidate in order to study two-dimensional phase transitions of surface alloy, a largely unexplored domain but crucial to understanding thermal stability of bimetallic nanoparticles. [ABSTRACT FROM AUTHOR]

We investigate the combination of nitrogen doping and vacancies in highly ordered pyrolytic graphite (HOPG), to engineer defect sites with adjustable electronic properties. We combine scanning tunneling microscopy and spectroscopy and density functional theory calculations to reveal the synergistic effects of nitrogen and vacancies in HOPG. Our findings reveal a remarkable shift of the vacancy-induced resonance peak from an unoccupied state in pristine HOPG to an occupied state in nitrogen-doped HOPG. This shift directly correlates with the shift of the charge neutrality point resulting from the n-doping induced by substitutional nitrogen. These results open new avenues for defect engineering in graphite or graphene and achieving novel functionalities for chemical activity or electronic properties., (© 2024 Wiley-VCH GmbH.)

Due to its diverse allotropes and intriguing properties, 2D phosphorus, also known as phosphorene, is a material of great interest. Here, the successful growth of flat hexagonal 2D phosphorus on Au(111) is reported. Starting from phosphorus linear chains at low coverage, a porous network and finally an extended 2D flat hexagonal (HexP) layer while increasing phosphorus deposition is formed. Using scanning tunneling microscopy/spectroscopy combined with ab initio calculations, the structure and electronic properties of the as-grown phosphorus structures are followed. The progressive formation of a phosphorus electronic band in the conduction band region is followed. More strikingly, a partial flatband that appears only on the HexP phase characterized by a sharp peak in the electronic spectrum is observed. These bands arise from the hybridization of phosphorus and gold atoms. This novel phosphorus-based structure exhibits remarkable electronic properties due to gold mediated phosphorus-phosphorus electronic coupling. This work paves the way for new interface material developments with attractive electronic properties., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

Monolayer transition metal dichalcogenide VTe 2 exhibits multiple charge density wave (CDW) phases, mainly (4 × 4) and (4 × 1). Here we report facile dynamic and tens-of-nanometer scale switching between these CDW phases with gentle bias pulses in scanning tunneling microscopy. Bias pulses purposely stimulate a reversible random CDW symmetry change between the isotropic (4 × 4) and anisotropic (4 × 1) CDWs, as well as CDW phase slips and rotation. The switching threshold of ∼1.0 V is independent of bias polarity, and the switching rate varies linearly with the tunneling current. Density functional theory calculations indicate that a coherent CDW phase switching incurs an energy barrier of ∼2.0-3.0 eV per (4 × 4) unit cell. While there is a challenge in understanding the observed large-area CDW random fluttering, we provide some possible explanations. The ability to manipulate electronic CDW phases sheds new light on tailoring CDW properties on demand.

It has recently been demonstrated how the nitrogen dopant concentration in graphene can be controlled spatially on the nano-meter scale using a molecular mask. This technique may be used to create ballistic electron optics-like structures of high/low doping regions; for example, to focus electron beams, harnessing the quantum wave nature of the electronic propagation. Here, we employ large-scale Greens function transport calculations based on a tight-binding approach. We first benchmark different tight-binding models of nitrogen in graphene with parameters based on density functional theory (DFT) and the virtual crystal approximation (VCA). Then, we study theoretically how the random distribution within the masked regions and the discreteness of the nitrogen scattering centers impact the transport behavior of sharp n-p and n-n' interfaces formed by different, realistic nitrogen concentrations. We investigate how constrictions for the current can be realized by patterned high/low doping regions with experimentally feasible nitrogen concentrations. The constrictions can guide the electronic current, while the quantized conductance is significantly washed out due to the nitrogen scattering. The implications for device design is that a p-n junction with nitrogen corrugation should still be viable for current focusing. Furthermore, a guiding channel with less nitrogen in the conducting canal preserves more features of quantized conductance and, therefore, its low-noise regime.

Spin-crossover molecules present the unique property of having two spin states that can be controlled by light excitation at low temperature. Here, we report on the photoexcitation of [Fe II ((3, 5-(CH 3 ) 2 Pz) 3 BH) 2 ] (Pz = pyrazolyl) ultrathin films, with thicknesses ranging from 0.9 to 5.3 monolayers, adsorbed on Cu(111) substrate. Using X-ray absorption spectroscopy measurements, we confirm the anomalous light-induced spin-state switching observed for sub-monolayer coverage and demonstrate that it is confined to the first molecular layer in contact with the metallic substrate. For higher coverages, the well-known light-induced excited spin-state trapping effect is recovered. Combining continuous light excitation with thermal cycling, we demonstrate that at low temperature light-induced thermal hysteresis is measured for the thicker films, while for sub-monolayer coverage, the light enables extension of the thermal conversion over a large temperature range. Mechanoelastic simulations underline that, due to the intermolecular interactions, opposite behaviors are observed in the different layers composing the films.

We demonstrate, based on low-temperature scanning tunneling microscopy (STM) and spectroscopy, a pronounced negative differential resistance (NDR) in spin-crossover (SCO) molecular devices, where a Fe II SCO molecule is deposited on surfaces. The STM measurements reveal that the NDR is robust with respect to substrate materials, temperature, and the number of SCO layers. This indicates that the NDR is intrinsically related to the electronic structure of the SCO molecule. Experimental results are supported by density functional theory (DFT) with nonequilibrium Green's function (NEGF) calculations and a generic theoretical model. While the DFT+NEGF calculations reproduce NDR for a special atomically sharp STM tip, the effect is attributed to the energy-dependent tip density of states rather than the molecule itself. We, therefore, propose a Coulomb blockade model involving three molecular orbitals with very different spatial localization as suggested by the molecular electronic structure.

We identify and manipulate commonly occurring defects in black phosphorus, combining scanning tunneling microscopy experiments with density functional theory calculations. A ubiquitous defect, imaged at negative bias as a bright dumbbell extending over several nanometers, is shown to arise from a substitutional Sn impurity in the second sublayer. Another frequently observed defect type is identified as arising from an interstitial Sn atom; this defect can be switched to a more stable configuration consisting of a Sn substitutional defect + P adatom, by application of an electrical pulse via the STM tip. DFT calculations show that this pulse-induced structural transition switches the system from a non-magnetic configuration to a magnetic one. We introduce States Projected Onto Individual Layers (SPOIL) quantities which provide information about atom-wise and orbital-wise contributions to bias-dependent features observed in STM images.