Search

We study a mid-order wavefront sensor (MOWFS) to address fine cophasing errors in exoplanet imaging with future large segmented aperture space telescopes. Observing Earth analogs around Sun-like stars requires contrasts down to $10^{-10}$ in visible light. One promising solution consists of producing a high-contrast dark zone in the image of an observed star. In a space observatory, this dark region will be altered by several effects, and among them, the small misalignments of the telescope mirror segments due to fine thermo-mechanical drifts. To correct for these errors in real time, we investigate a wavefront control loop based on a MOWFS with a Zernike sensor. Such a MOWFS was installed on the high-contrast imager for complex aperture telescopes (HiCAT) testbed in Baltimore in June 2023. The bench uses a 37-segment Iris-AO deformable mirror to mimic telescope segmentation and some wavefront control strategies to produce a dark zone with such an aperture. In this contribution, we first use the MOWFS to characterize the Iris-AO segment discretization steps. For the central segment, we find a minimal step of 125 $\pm$ 31 pm. This result will help us to assess the contribution of the Iris-AO DM on the contrast in HiCAT. We then determine the detection limits of the MOWFS, estimating wavefront error amplitudes of 119 and 102 pm for 10 s and 1 min exposure time with a SNR of 3. These values inform us about the measurement capabilities of our wavefront sensor on the testbed. These preliminary results will be useful to provide insights on metrology and stability for exo-Earth observations with the Habitable Worlds Observatory., Comment: 9 pages, 6 figures

Wavefront sensing and control (WFSC) will play a key role in improving the stability of future large segmented space telescopes while relaxing the thermo-mechanical constraints on the observatory structure. Coupled with a coronagraph to reject the light of an observed bright star, WFSC enables the generation and stabilisation of a dark hole (DH) in the star image to perform planet observations. While WFSC traditionally relies on a single wavefront sensor (WFS) input to measure wavefront errors, the next generation of instruments will require several WFSs to address aberrations with different sets of spatial and temporal frequency contents. The multiple measurements produced in such a way will then have to be combined and converted to commands for deformable mirrors (DMs) to modify the wavefront subsequently. We asynchronously operate a loop controlling the high-order modes digging a DH and a control loop that uses the rejected light by a Lyot coronagraph with a Zernike wavefront sensor to stabilize the low-order aberrations. Using the HiCAT testbed with a segmented telescope aperture, we implement concurrent operations and quantify the expected cross-talk between the two controllers. We then present experiments that alternate high-order and low-order control loops to identify and estimate their respective contributions. We show an efficient combination of the high-order and low-order control loops, keeping a DH contrast better than 5 x 10-8 over a 30 min experiment and stability improvement by a factor of 1.5. In particular, we show a contrast gain of 1.5 at separations close to the DH inner working angle, thanks to the low-order controller contribution. Concurrently digging a DH and using the light rejected by a Lyot coronagraph to stabilize the wavefront is a promising path towards exoplanet imaging and spectroscopy with future large space observatories.

Combining large segmented space telescopes, coronagraphy and wavefront control methods is a promising solution to produce a dark hole (DH) region in the coronagraphic image of an observed star and study planetary companions. The thermal and mechanical evolution of such a high-contrast facility leads to wavefront drifts that degrade the DH contrast during the observing time, thus limiting the ability to retrieve planetary signals. Lyot-style coronagraphs are starlight suppression systems that remove the central part of the image for an unresolved observed star, the point spread function, with an opaque focal plane mask (FPM). When implemented with a flat mirror containing an etched pinhole, the mask rejects part of the starlight through the pinhole which can be used to retrieve information about low-order aberrations. We propose an active control scheme using a Zernike wavefront sensor (ZWFS) to analyze the light rejected by the FPM, control low-order aberrations, and stabilize the DH contrast. The concept formalism is first presented before characterizing the sensor behavior in simulations and in laboratory. We then perform experimental tests to validate a wavefront control loop using a ZWFS on the HiCAT testbed. By controlling the first 11 Zernike modes, we show a decrease in wavefront error standard deviation by a factor of up to 9 between open- and closed-loop operations using the ZWFS. In the presence of wavefront perturbations, we show the ability of this control loop to stabilize a DH contrast around 7x10^-8 with a standard deviation of 7x10^-9. Active control with a ZWFS proves a promising solution in Lyot coronagraphs with an FPM-filtered beam to control and stabilize low-order wavefront aberrations and DH contrast for exoplanet imaging with future space missions.

Photometric monitoring of Beta Pictoris in 1981 showed anomalous fluctuations of up to 4% over several days, consistent with foreground material transiting the stellar disk. The subsequent discovery of the gas giant planet Beta Pictoris b and the predicted transit of its Hill sphere to within 0.1 au projected distance of the planet provided an opportunity to search for the transit of a circumplanetary disk in this $21\pm 4$ Myr-old planetary system. Continuous broadband photometric monitoring of Beta Pictoris requires ground-based observatories at multiple longitudes to provide redundancy and to provide triggers for rapid spectroscopic followup. These observatories include the dedicated Beta Pictoris monitoring observatory bRing at Sutherland and Siding Springs, the ASTEP400 telescope at Concordia, and observations from the space observatories BRITE and Hubble Space Telescope. We search the combined light curves for evidence of short period transient events caused by rings and for longer term photometric variability due to diffuse circumplanetary material. We find no photometric event that matches with the event seen in November 1981, and there is no systematic photometric dimming of the star as a function of the Hill sphere radius. We conclude that the 1981 event was not caused by the transit of a circumplanetary disk around Beta Pictoris b. The upper limit on the long term variability of Beta Pictoris places an upper limit of $1.8\times 10^{22}$ g of dust within the Hill sphere. Circumplanetary material is either condensed into a non-transiting disk, is condensed into a disk with moons that has a small obliquity, or is below our detection threshold. This is the first time that a dedicated international campaign has mapped the Hill sphere transit of a gas giant extrasolar planet at 10 au., Comment: 12 pages, 9 figures, 1 table, accepted for publication in A&A. Reduced data and reduction scripts on GitHub at https://github.com/mkenworthy/beta_pic_b_hill_sphere_transit

Aims. We describe the design and first light observations from the $\beta$ Pictoris b Ring ("bRing") project. The primary goal is to detect photometric variability from the young star $\beta$ Pictoris due to circumplanetary material surrounding the directly imaged young extrasolar gas giant planet \bpb. Methods. Over a nine month period centred on September 2017, the Hill sphere of the planet will cross in front of the star, providing a unique opportunity to directly probe the circumplanetary environment of a directly imaged planet through photometric and spectroscopic variations. We have built and installed the first of two bRing monitoring stations (one in South Africa and the other in Australia) that will measure the flux of $\beta$ Pictoris, with a photometric precision of $0.5\%$ over 5 minutes. Each station uses two wide field cameras to cover the declination of the star at all elevations. Detection of photometric fluctuations will trigger spectroscopic observations with large aperture telescopes in order to determine the gas and dust composition in a system at the end of the planet-forming era. Results. The first three months of operation demonstrate that bRing can obtain better than 0.5\% photometry on $\beta$ Pictoris in five minutes and is sensitive to nightly trends enabling the detection of any transiting material within the Hill sphere of the exoplanet.