Search

Insensitive high explosive materials (IHE) such as 3-nitro-1,2,4-triazol-5-one (NTO) and 2,4-dinitroanisole (DNAN) are increasingly being used in formulations of insensitive munitions alongside 1,3,5-trinitroperhydro-1,3,5-triazine (RDX). Load, assembly and packing (LAP) facilities that process munitions produce wastewater contaminated with IHE which must be treated before discharge. Some facilities can produce as much as 90,000 L of contaminated wastewater per day. In this review, methods of wastewater treatment are assessed in terms of their strengths, weaknesses, opportunities and threats for their use in production of IHE munitions including their limitations and how they could be applied to industrial scale LAP facilities. Adsorption is identified as a suitable treatment method, however the high solubility of NTO, up to 16.6 g.L -1 which is 180 times higher that of TNT, has the potential to exceed the adsorptive capacity of carbon adsorption systems. The key properties of the adsorptive materials along the selection of adsorption models are highlighted and recommendations on how the limitations of carbon adsorption systems for IHE wastewater can be overcome are offered, including the modification of carbons to increase adsorptive capacity or reduce costs., Competing Interests: The authors declare no conflict of interest., (© 2021 Published by Elsevier Ltd.)

Insensitive high explosives are increasingly being used to replace more sensitive formulations, however large quantities of environmentally hazardous wastewater are generated from loading, assembling and packing processes. Currently, there is limited literature regarding the treatment of wastewater contaminated with these hazardous insensitive high explosive materials such as 1,3,5-trinitroperhydro- 1,3,5-triazine (RDX), 2,4-dinitoranisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO). The preferred method of explosive wastewater treatment is adsorption by activated carbon, usually through treatment columns or fluidised beds that are simple to operate and cost effective. The aim of this research was to assess whether commercially available activated carbons would be suitable and economically viable to treat explosive wastewater containing RDX, DNAN and NTO. Bottle point tests were used to determine adsorption capacity and adsorption kinetics for the individual insensitive high explosives with three different activated carbons. Equilibrium data were fitted to the Langmuir, Freundlich and Temkin isotherms to determine the mechanisms of adsorption. Six hour bottle point tests for a mixture of the three insensitive high explosive constituents were used to consider possible preferential adsorption. As expected, RDX and DNAN were adsorbed at concentrations up to 40 mg.L-1 and 150 mg.L-1 respectively by the activated carbons tested, demonstrating the viability of treatment by adsorption. However, at the high concentrations of NTO expected in wastewater (1400 mg.L-1) activated carbons were rapidly saturated, suggesting that treatment of NTO contaminated wastewater would require prohibitively large quantities of activated carbon compared to RDX and DNAN., Competing Interests: Declaration of competing interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

The environmental risks from explosive manufacturing and testing activities are usually evaluated using a qualitative process such as environmental impact prioritisation as recommended by legislation and guidance. However, standard environmental management system (EMS) guidance rarely provides detailed information on how to objectively assess the significance of the environmental impacts based on a rational scientific evidence. Quantitative exposure and eco-toxicity assessments are frequently used in combination with environmental threshold limit guidelines, but these omit important environmental impacts such as physical damage to land, nuisance and contribution to climate change. These impacts are particularly relevant to the explosives industry where noise nuisance and physical damage are given high priority. In addition, contamination from explosive compositions may comprise mixtures of multiple legacy and new generation explosives such as 1,3,5-trinitro-1,3,5-triazinane (RDX), 2,4,6-trinitrotoluene (TNT), 5-nitro-1,2,4-triazol-3-one (NTO), 2,4-dinitroanisole (DNAN) and nitroguandine (NQ), which may have combined impacts not captured by conventional eco-toxicity assessments. Further, threshold limits for energetic materials in soil and water have not been established for most nations. Additionally, in the explosive industry wider concerns such as legislative compliance and stakeholder concerns may help to provide a more broadly applicable assessment of environmental impact. Therefore in this study a novel decision framework was developed to integrate empirical data with business risks to enable rational decision making for the environmental management of explosive manufacturing facilities. The application of the framework was illustrated using three case studies from the explosive manufacturing industry to demonstrate how the framework can be used to justify environmental management decision making. By linking the environmental impacts to business risks, we demonstrate that manufacturers are able to assess a wide spectrum of issues that might not be identified in the initial environmental assessment such as non-toxic pollution incidents, breaches in legislation and stakeholder perceptions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Polymer-bonded explosives (PBX) fulfil the need for insensitive munitions. However, the environmental impacts of PBX are unclear, even though it is likely that PBX residues from low-order detonations and unexploded ordnance are deposited on military training ranges. The release of high explosives from the polymer matrix into the environment has not been studied in detail, although as polymers degrade slowly in the environment we anticipate high explosives to be released into the environment. In this study, PBXN-109 (nominally 64% RDX) samples were exposed to variable UK climatic conditions reproduced in the laboratory to determine the effects of temperature, UV irradiation and rainfall on the release of RDX from the polymer binder. The most extreme conditions for spring, summer and winter in the UK were artificially reproduced. We found that up to 0.03% of RDX was consistently released from PBXN-109. The rate of RDX release was highest in samples exposed to the summer simulation, which had the lowest rainfall, but the highest temperatures and longest UV exposure. This was confirmed by additional experiments simulating an extreme summer month with consistently high temperatures and long periods of sunlight. These results probably reflect the combination of polymer swelling and degradation when samples are exposed to higher temperatures and prolonged UV irradiation., (Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.)

Formazan-based colorimetric cytotoxicity assays, such as the MTT assay, are typically used to assess cell viability with only metabolically active cells reducing tetrazolium salts into the formazans, which is then quantified by absorbance. Fluorescence offers several advantages compared to colorimetric assays and would enable techniques such as flow cytometry and confocal microscopy to be used for analysis. Here, fluorescent formazans 10, 11 and 12, and their corresponding tetrazolium salts 13, 16 and 24, respectively, were synthesised by incorporation of a known fluorophore backbone (coumarin, fluorescein and rhodol) with disruption of the conjugated system preventing or reducing fluorescence of the tetrazolium salts. These tetrazolium salts were successfully reduced to the fluorescent formazans with cells and offer a step forward in the development of fluorescent cytotoxicity assays.