Search

This study investigated cellobionate production from a lignocellulosic substrate using Neurospora crassa HL10. Utilizing NaOH-pretreated wheat straw as the substrate obviated the need for an exogenous redox mediator addition, as lignin contained in the pretreated wheat served as a natural mediator. The low laccase production by N. crassa HL10 on pretreated wheat straw caused slow cellobionate production, and exogenous laccase addition accelerated the process. Cycloheximide induced substantial laccase production in N. crassa HL10, enabling the strain to yield approximately 57 mM cellobionate from pretreated wheat straw (equivalent to 20 g/L cellulose), shortening the conversion time from 8 to 6 days. About 92% of the cellulose contained in the pretreated wheat straw is converted to cellobionate. In contrast to existing methods requiring pure cellobiose or cellulase enzymes, this process efficiently converts a low-cost feedstock into cellobionate at a high yield without enzyme or redox mediator supplementation.

Laccases from white-rot fungi catalyze lignin depolymerization, a critical first step to upgrading lignin to valuable biodiesel fuels and chemicals. In this study, a wildtype laccase from the basidiomycete Fomitiporia mediterranea (Fom_lac) and a variant engineered to have a carbohydrate-binding module (Fom_CBM) were studied for their ability to catalyze cleavage of β-O-4 ether and C-C bonds in phenolic and non-phenolic lignin dimers using a nanostructure-initiator mass spectrometry-based assay. Fom_lac and Fom_CBM catalyze β-O-4 ether and C-C bond breaking, with higher activity under acidic conditions (pH < 6). The potential of Fom_lac and Fom_CBM to enhance saccharification yields from untreated and ionic liquid pretreated pine was also investigated. Adding Fom_CBM to mixtures of cellulases and hemicellulases improved sugar yields by 140% on untreated pine and 32% on cholinium lysinate pretreated pine when compared to the inclusion of Fom_lac to the same mixtures. Adding either Fom_lac or Fom_CBM to mixtures of cellulases and hemicellulases effectively accelerates enzymatic hydrolysis, demonstrating its potential applications for lignocellulose valorization. We postulate that additional increases in sugar yields for the Fom_CBM enzyme mixtures were due to Fom_CBM being brought more proximal to lignin through binding to either cellulose or lignin itself.

Laccase immobilization is an effective way to realize the industrial application of laccase, but the loss of immobilized laccase activity is serious, which is an urgent problem to be solved. In this study, a novel laccase immobilization material was prepared by mixing waste Mn–Cu-loaded activated carbon with cellulose solution and regenerated in hydrochloric acid solution, which significantly improved the immobilized laccase activity. The optimum immobilization conditions (T, pH and initial laccase concentration) of Mn–Cu-AC/cellulose beads (Mn–Cu-ACC) for laccase were studied by the response surface method. Under the optimum conditions (T = 43 °C, pH = 4.0 and c = 6.8 g L−1), immobilized laccase (Laccase@Mn–Cu-ACC) showed excellent performance in terms of pH stability, thermostability and storage stability. And the enzyme activity of the laccase immobilized on the Mn–Cu-ACC carrier remarkably increased by 29.6% compared to that of the ACC. At last, the Laccase@Mn–Cu-ACC was used for the degradation of bisphenol A (BPA). Under the optimum conditions (t = 5.5 h, T = 45 °C, pH = 4.0 and initial cBPA = 70 mg L−1), the removal rate of BPA reached 72.3% in the first cycle, and after 5 cycles of reusing the immobilized laccase, the relative removal rate of BPA was retained at 53.2% of the initial removal rate. This study developed a new type of immobilized laccase carrier and provided a new path for the application of waste heavy metal loaded activated carbon. [ABSTRACT FROM AUTHOR]

Laccase is an enzyme known for its eco-friendly uses in environmental cleanup and biotechnology. However, it has limitations such as low stability, high cost, and complex recycling. So, there is a need for laccase mimics that can effectively imitate its properties. Herein, we created copper formate–lysine nanoparticles (Cuf-Lys) that mimic laccase's activity. The developed Cuf-Lys demonstrated remarkable polyphenol oxidase-like activity, stability, and recyclability, making them suitable for the fabrication of efficient colorimetric sensors for the detection of epinephrine. These sensors had a specific response and could accurately measure epinephrine concentrations ranging from 2.5 to 50 μM, with a detection limit as low as 1 μM. Furthermore, the biosensor demonstrated high sensitivity and selectivity when applied to the detection of rutin. The limit of detection for rutin was determined to be 0.16 μM while in the linear concentration range of 0.25 to 150.0 μM. We believe that Cuf-Lys provide a new route for the design of laccase mimics, showing potential applications for biomedical diagnosis and environmental monitoring. [ABSTRACT FROM AUTHOR]

Objective: The purpose of this experiment was to explore the effect of adding cellulase and laccase on fermentation quality and microbial community in mixed silage of corn stover and wet brewer's grains. Try to a new approach for the proper preservation and utilization of the agro-industrial by-products (corn stover and wet brewer's grains). Methods: The experiment was divided into four groups: CK (control), C (cellulase, 120 U/g fresh matter [FM]), L (laccase, 50 U/g FM), CL (cellulase 120 U/g FW and laccase 50 U/g FM), and the chemical composition, fermentation quality, microbial population and microbial community in mixed silage of corn stover and wet brewer's grains after 30 day's fermentation were determined. Results: Compared to control, the addition of cellulase significantly increased crude protein (CP), water-soluble carbohydrate (WSC), lactic acid bacteria (LAB) counts, while significantly decreased the neutral detergent fiber (NDF), acid detergent fiber (ADF) content (P < 0.05). Adding laccase significantly decreased the acid detergent lignin (ADL) content (P < 0.05). Combined application of cellulase and laccase significantly increased the CP, WSC content and LAB counts, while significantly decreased pH value, NDF, ADF and ADL content (P < 0.05), thereby improving fermentation quality. In addition, the application of cellulase and laccase increased the abundance of Firmicutes and LAB genera, and decreased microbial diversity level of the sample. Conclusion: The combined application of cellulase and laccase further improved fermentation quality and microbial community in mixed silage of corn stover and wet brewer's grains. [ABSTRACT FROM AUTHOR]

Enzymes secreted by white-rot fungi, such as laccase, offer a promising solution for treating xenobiotic compounds dangerous to the environment and human health. This study aimed to perform a comprehensive analysis of the tolerance of Pleurotus pulmonarius LBM 105 and its laccase activity toward the pesticides 2,4-D and chlorpyrifos both in vitro and in silico. The fungal strain was able to grow in different concentrations of the pesticides, showing evident morphological alterations. Laccase activity and a 53 kDa electromorph were present in all treatments, showing significant stability with peak activity achieved at a pH of 5.6 and within a temperature range of 50–60 °C. Three laccase genes were mapped, annotated, and characterized from the genome. PplacI obtained better structural validation and affinity energy of − 5.05 and − 7.65 kcal mol−1 with 2,4-D and chlorpyrifos, respectively. The Molecular Mechanics/Poisson-Boltzmann Surface Area analysis at 250 ns confirmed the docking results, revealing the existence of stronger hydrophobic interactions between laccase and chlorpyrifos and highlighting the importance of the Phe341 residue in stabilizing both complexes. Understanding the impact of pesticides on laccase's catalytic function is key to formulating and applying future biotechnological strategies with this enzyme. [ABSTRACT FROM AUTHOR]

Laccase is an enzyme that plays an important role in fungi, including lignin degradation, stress defense, and formation of fruiting bodies. Auricularia auricula-judae is a white-rot fungus in the Basidiomycota phylum, capable of delignifying wood. In this study, seven genes belonging to the laccase family were identified through de novo sequencing, containing Cu-Oxidase, Cu-Oxidase_2, and Cu-Oxidase_3 domains. Subsequently, the physical characteristics, phylogenetic relationships, protein secondary structure, and tertiary structure of the laccase family (AaLac1–AaLac7) were analyzed. Prediction of N-glycosylation sites identified 2 to 10 sites in the laccase family, with AaLac7 having the highest number of sites at 10. Sequence alignment and analysis of the laccase family showed high consistency in signature sequences. Phylogenetic analysis confirmed the relationship among laccases within the family, with AaLac3–AaLac4 and AaLac5–AaLac6 being closely positioned on the tree, exhibiting high similarity in tertiary structure predictions. This study identified and analyzed laccase family genes in Auricularia auricula-judae using de novo sequencing, offering a simple method for identifying and analyzing the laccase family in organisms with unknown genetic information. [ABSTRACT FROM AUTHOR]

Spent mushroom compost (SMC) is a waste byproduct generated by the mushroom industry, with the current disposal methods involving landfills or incineration, causing environmental problems. This study introduces a cascading valorization based on circular economy. A water-washing pretreatment is suggested to reduce the ash content and improve the calorific value. Furthermore, an oxidative torrefaction is proposed to enhance the physicochemical properties and evaluate the residence time, temperature, and initial weight effects. The investigation revealed that the calorific value increased by 49.46% in the best water washing scenario and the SMC contains laccase. During SMC torrefaction, mass and energy yields exceeded 80%, and the calorific value was improved. Finally, torrefaction in situ CO2 capture was achieved by forming CaCO3, with a mass fraction increase of up to 7.4%. The study describes the cascading innovation use of this residue on a TRL4 higher than previously reported studies, thereby contributing to gaining an understanding of sustainable industrial mushroom production. [ABSTRACT FROM AUTHOR]

Lignin is a phenolic polymer that is a major source of biomass. Oxidative enzymes, such as laccase and peroxidase, are required for lignin polymerisation. Laccase is a member of the multicopper oxidase family and has a high amino acid sequence similarity with ascorbate oxidase. However, the process of functional differentiation between the two enzymes remains poorly understood. In this study, the common ancestry sequence of laccase and ascorbate oxidase (AncMCO) was predicted via phylogenetic reconstruction, and its in vivo effect on lignin biosynthesis in Arabidopsis thaliana was assessed. The estimated AncMCO sequence conserved key residues that coordinate with copper ions, implying that the electron transfer system is likely to be conserved in AncMCO. However, multiple insertions/deletions corresponding to protein surface structures have been found between laccase, ascorbate oxidase, and AncMCO. The overexpression of canonical laccase (AtLAC4) and ascorbate oxidase (AtAAO1) in A. thaliana resulted in notable increases of syringyl/guaiacyl lignin unit ratio in stems, whereas, in contrast, the overexpression of AncMCO did not show any detectable change in lignin deposition. Transcriptomic analysis revealed that the AtAAO1-overexpressing line exhibited significant changes in the expression of a wide range of cell wall biosynthesis genes. These results highlight the importance of the molecular evolution of multicopper oxidase, which drives lignin biosynthesis during plant evolution. [ABSTRACT FROM AUTHOR]

The development of a cost-effective and environment-friendly conversion method to overcome the recalcitrance of biomass is a challenging task for enhancing the value-added potential of lignocellulosic compounds. In this study, a photo-enzyme composite catalyst by immobilizing laccase on Fe 3 O 4 /TiO 2 (denoted as LC-Fe 3 O 4 /TiO 2) was applied to the pretreatment and enzymatic saccharification of Spartina alterniflora Loisel (SAL) under the action of alternating light/dark cycles. The effect of the pretreatment temperature, pretreatment time, LC-Fe 3 O 4 /TiO 2 concentration, mass concentration of straw particles, and hydrolysis time on delignification efficiency and reducing sugar yield was investigated by a central composite design (CCD). Under the selected conditions (48 ℃, pretreatment time of 70 min, LC-Fe 3 O 4 /TiO 2 concentration of 4.9 mg/mL, mass concentration of straw particles of 22 % (w/v), hydrolysis time of 55 h), 92.53 % delignification and 129.85 mg/g reducing sugar yield were achieved. The enzymatic hydrolysis efficiency was higher compared to conventional methods. Moreover, the LC-Fe 3 O 4 /TiO 2 showed good recyclability and reusability. Developed LC-Fe 3 O 4 /TiO 2 particles have a high potential for use in biomass utilization. [Display omitted] • Laccase-Fe 3 O 4 /TiO 2 integrated catalyst (LC-Fe 3 O 4 /TiO 2) is first synthesized. • Effects of LC-Fe 3 O 4 /TiO 2 on pretreatment and saccharification is studied. • LC-Fe 3 O 4 /TiO 2 can enhance sugar yield under the alternation of light and dark. • LC-Fe 3 O 4 /TiO 2 could be efficiently reused up to 3 cycles. [ABSTRACT FROM AUTHOR]

This study aimed to develop a nano-biosystem by covalently binding recombinant laccase from Bacillus licheniformis (rLAC BL) to PEGylated silica-coated magnetic nanoparticles (EMNPs-PEG) and evaluate its cytotoxicity and anti-inflammatory properties on a pro-monocytic cell line. The active rLAC BL was purified from the bacterial culture with a yield of approximately 14 mg/L and purity of about 91 %. The physicochemical characteristics of EMNP-PEG-rLAC BL were confirmed using DLS, UV-Vis spectrum, FTIR, EDS, and SEM. The immobilized rLAC BL exhibited improved kinetic parameters compared to the bare enzyme. The IC 50 value for EMNP-PEG-rLAC BL (58.7 μg/mL) was lower than that of the bare enzyme after 48 hours of treatment on U937 cells. Both EMNP-PEG-rLAC BL and rLAC BL significantly decreased the expression levels of key cytokines (TNF-α, IL-6, IL-17, and IL-23) in LPS-stimulated cells, indicating promising anti-inflammatory properties of rLAC BL. Given the association between chronic inflammation and cancer, this newly developed enzyme-based nanobiomedicine holds potential as a therapeutic option for inflammatory conditions and malignant diseases. However, further research is needed to validate these findings and fully assess the therapeutic potential of LACs before clinical translation can be considered. [Display omitted] • Recombinant laccase (rLAC BL) was produced from Bacillus licheniformis. • The rLAC B was immobilized on PEGylated silica-coated magnetic nanoparticles. • Immobilization of rLAC BL notably enhanced enzyme affinity for its substrate. • Immobilized rLAC BL exhibited anti-inflammatory effects on the U937 cell line. [ABSTRACT FROM AUTHOR]

Laccases are enzymes that catalyse oxidation of various aromatic compounds, with potential industrial and environmental applications. Here, a novel laccase, Cb Laccase, was purified to homogeneity from the medicinal wild mushroom Coriolus brevis using standard chromatographic procedures. The overall yield was approximately 11 %. Gel filtration and sodium dodecyl sulphate–polyacrylamide gel electrophoresis revealed that Cb Laccase is a monomer with a molecular mass of 51 kDa. The optimal reaction pH with 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) as a substrate was low (pH 2.5), and the optimal reaction temperature was relatively high (70 °C). The enzyme exhibited very low K m (0.02 mM) and high catalytic efficiency (7.2 × 106) with syringaldazine, and its substrate specificity followed the order: syringaldazine > o -dianisidine > 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) > 2,6-dimethoxyphenol > catechol. Addition of 1 mM Cu2+ enhanced the enzymatic activity, whereas dithiothreitol, sodium azide, and diethyldithiocarbamic acid significantly inhibited it. The enzyme was highly stable at high temperatures, over a wide range of pH values, and in the presence of various detergents. These findings suggest that Cb Laccase is distinct from laccases previously purified from other sources and may be useful for the degradation of environmental pollutants. [Display omitted] • Cb Laccase was purified from Coriolus brevis and then characterized. • It was a 51-kDa monomeric enzyme with varying specificities across substrates. • It was stable at high temperatures, over a wide pH range, and in detergents. • It could potentially be applicable in environmental pollutant degradation studies. [ABSTRACT FROM AUTHOR]

The rise in industrial establishments all around the globe has also enhanced the demand of enzymes for usage in processes. Laccases are one of the dominant enzymes which have been employed in industrial processes over the years. They are a type of multi-copper oxidases (MCOs) which is a category of enzymes having diverse substrate selectivity and varying biological activity. All multi-copper oxidases can convert oxygen into water without creating unwanted products owing to the existence of cupredoxin-like domains. This review article details up-to-date knowledge about laccases, their structures and various sources, the laccase mediator system, mechanism of action and applications of laccases in numerous biotechnological processes such as in food industry for wine and beer stabilization, synthesis of cosmetics and pharmaceutically important compounds, dye detoxification in industrial effluents, xenobiotic degradation, paper and pulp bleaching, biofuel cells and biosensor development for detection for various chemical compounds. [ABSTRACT FROM AUTHOR]

An intense black pigmented halotolerant yeast GUBPC1, was obtained from the solar salterns of Nerul, Goa-India. The isolate could tolerate 0 to 20 % NaCl. FE-SEM analysis revealed its polymorphic nature, exhibiting oval cells at higher salt concentrations and filamentous spindle like shapes at lower concentrations. Initially, the cells appear oval, yeast like in shape but gradually after 15 days of incubation, it becomes elongated and undergoes budding, exhibiting various budding patterns, from single polar bud to bipolar buds with annellidic ring, to lateral buds and eventually forming filamentous hyphae. The intracellular black pigment was identified as melanin based on ultraviolet–visible spectroscopy analysis. The molecular identification of the culture showed closest similarity with Hortaea werneckii. Plant polymer-degrading enzymatic activities such as cellulase, laccase, chitinase, xylanase, pectinase, amylase and protease were exhibited by the isolate GUBPC1. To further understand and explore its biotechnological potential, we performed whole-genome sequencing and analysis. The obtained genome size was 26.93 Mb with 686 contigs and a GC content of 53.24 %. We identified 9383 protein-coding genes, and their functional annotation revealed the presence of 435 CAZyme genes and 16 functional genes involved in secondary metabolite synthesis, thus providing a basis for its potential value in various biotechnological applications. [ABSTRACT FROM AUTHOR]

Ganoderma, a well-known genus in the Ganodermataceae family, has caused the extinction of several tree species due to its pathogenicity. This study explored the pathogenic effect of a newly identified Ganoderma species on trees and its competitive efficiency against Trichoderma species. Ganoderma camelum sp. nov. is characterized by small sessile basidiomata and a velvety, soft, camelbrown pileus. Phylogenetic analysis and ITS rDNA sequences indicated that the species were Trichoderma and Ganoderma camelum. Both fungal species competed antagonistically by secreting laccase. The laccase activity of G. camelum, with a value of 8.3 ± 4.0 U/mL, demonstrated the highest competitive activity against Trichoderma species. The laccase produced by T. atroviride (2.62 U/mL) was most effective in countering the pathogenic action of the novel G. camelum. The molecular weights of laccase were determined using SDSPAGE (62.0 kDa for G. camelum and 57.0 kDa for T. atroviride). Due to the white rot induced by this Ganoderma species in the host tree, G. camelum showed the highest percentage inhibition of radial growth (76.3%) compared to T. atroviride (28.7%). This study aimed to evaluate the competitive antagonistic activity of Ganoderma and Trichoderma on malt extract agar media in the context of white rot disease in the host tree. This study concluded that the laccase from G. camelum caused weight loss in rubber wood blocks through laccase action, indicating tissue injury in the host species. Therefore, it was also concluded that G. camelum was more effective in pathogenic action of the host and resisted the biological action of T. atroviride. In principal components analysis (PCA), all the species associated with laccase exhibited a very strong influence on the variability of the system. The PIRG rate (percentage inhibition of radial growth) was strongly and positively correlated with laccase activity. [ABSTRACT FROM AUTHOR]

Nanozymes based on metal-organic frameworks (MOFs) have been concentrated on due to their naturally high-disperse metal active sites and the adjustable coordination chemistry. In this work, an N-rich melamine (Mel) was introduced into the Cu-MOF composed of copper(II) nitrate and 2-aminoterephthalic acid (Cu-NH2-BDC-Mel) to mimic the laccase, which enzyme-like activities were assessed and applied in sensing analyses toward several phenols and amines. Compared to unmodified Cu-NH2-BDC, the resulting Cu-NH2-BDC-Mel exhibits enhanced laccase-like activity, superior stability and catalytic kinetics. It is demonstrated that melamine-doping has increased nitrogen content as well as the surface area, as a result, exhibits a lower Michaelis–Menten constant (Km) (0.1877 mM) and higher maximum reaction rate (Vmax) (1.7933 × 10−3 mM·min−1) in comparison with that of natural laccase. Based on that, an efficient colorimetric sensing strategy for several phenols and amines was built up with excellent selectivity and anti-interference by using the laccase-like Cu-NH2-BDC-Mel, the detection limits are 3.51 µM of adrenaline and 4.41 µM of dopamine. The work broadens the prospect development of bio-colorimetric sensing based on the ligand-modified Cu-MOFs nanozymes catalysis. [ABSTRACT FROM AUTHOR]

A variety of important agricultural crops host fungi from the Aspergillus genus can produce cancerogenic secondary metabolites such as aflatoxins. Consequently, novel strategies for detoxification and their removal from food and feed chains are required. Here, detoxification of Aflatoxin B1 (AFB1) by the Bacillus subtilis multi-copper oxidase CotA (BsCotA) was investigated. This laccase was recombinantly produced in E. coli while codon optimization led to duplication of the amount of active protein obtained. CuCl2 was added to the cultivation medium leading to a 25-fold increase of Vmax corresponding to improved incorporation of Cu2+ into the enzyme protein which is essential for the catalytic reaction. To avoid potential cytotoxicity of Cu2+, cultivation was performed at microaerobic conditions indeed leading to 100x more functional protein when compared to standard aerobic conditions. This was indicated by an increase of Vmax from 0.30 ± 0.02 to 33.56 ± 2.02 U/mg. Degradation kinetics of AFB1 using HPLC with fluorescence detection (HPLC-FLD) analysis indicated a theoretical substrate saturation above solubility in water. At a relatively high concentration of 500 μg/L, AFB1 was decomposed at 10.75 μg/Lh (0.17 nmol*min−1*mg−1) at a dosage of 0.2 μM BsCotA. AFQ1 and epi-AFQ1 were identified as the initial oxidation products according to mass spectrometry (i.e., HPLC-MS, HPLC-QTOF). None of these molecules were substrates for laccase but both decomposed in buffer. However, decomposition does not seem to be due to hydration of the vinyl ether in the terminal furan ring. Genotoxicity of the formed AFB1 was assessed in several dilutions based on the de-repression of the bacterial SOS response to DNA damage indicating about 80-times reduction in toxicity when compared to AFQ1. The results of this study indicate that BsCotA has high potential for the biological detoxification of aflatoxin B1. [ABSTRACT FROM AUTHOR]

Laccase, the selectively lignin degrader, vital to the initiation of lignocellulosic deconstruction was immobilized onto activated agarose beads to increase its reuse potential. Laccase cross-linked beads (~ 3.42 mm) recorded a specific activity of 23 Umg− 1, retaining about 80.43% enzyme activity after 45 days of storage. The immobilization yield and efficiency were 89% and 97% respectively. The equilibrium data fitted the Freundlich equation (R2 = 0.9987) demonstrating multilayer adsorption and the presence of Cu, Fe, and S in the elemental analysis of immobilized beads established effective binding between activated agarose beads and the laccase protein. Characterization studies of the immobilized laccase-treated crop residues revealed significant differences in the lignin polymer after each treatment cycle. An increase in digestibility of 26.21% and 7.62% was observed in paddy and finger millet-treated straws respectively, over the controls corroborating efficient lignin depolymerization. The propitious performance of laccase beads authenticated in the batch enzymatic reactor to treat crop residues paves headway as a sustainable green technology in the deconstruction of crop residues for use as ruminant feed, augmenting productivity. [ABSTRACT FROM AUTHOR]

AbstractOwing to the production of lignin-modifying enzymes (LMEs), white-rot fungi (WRF) such as polypores are potent organisms in the biodegradation of xenobiotic pollutants. The nonspecific function of LMEs including laccase and manganese peroxidase (MnP), has enabled the use of WRF in biotechnological applications, particularly in bioremediation. In this study, 12 strains from nine white-rot basidiomycete genera viz., Ganoderma, Inocutis, Irpex, Lentinus, Lenzites, Oxyporus, Peniophora, Sanghuangporus, and Trametes were isolated from Iran and identified using morphological and molecular tools. The enzyme activity of laccase and manganese peroxidase that directly correlated with the biodegradation were determined, and the strains with the highest enzyme activities were evaluated for their ability to degrade 400 mg/L of anthracene over 28 days. Gas chromatography with flame ionization detector (GC-FID) revealed that four polypores viz., Trametes versicolor v21te, T. versicolor v22da, T. hirsuta, and Oxyporus sp. degraded 64%, 52%, 34%, and 20% of the anthracene, respectively. According to our analysis, the examined indigenous WRF are potentially useful candidates for the development of new mycoremediation techniques to degrade polycyclic aromatic hydrocarbons (PAHs). [ABSTRACT FROM AUTHOR]

Laccase, a multi‐copper oxidase, is limited by its optimal temperature range and isolation costs. To overcome these challenges, we synthesized copper‐doped zeolitic imidazolate framework‐67 (Cu‐doped ZIF‐67) with 16 mol % Cu as an artificial laccase catalyst. The introduced Cu site acts as the phenol oxidation site, and Co‐based ZIF‐67 is the four‐electron oxygen reduction site. Laccase also employs this division of oxidation and reduction sites. Cu‐doped ZIF‐67 demonstrated significant catalytic activity, superior to natural laccase, especially at elevated temperatures, and maintained stability across multiple reaction cycles. These findings suggest that Cu‐doped ZIF‐67 is a robust, reusable alternative for industrial applications requiring high thermal stability and efficient catalysis. [ABSTRACT FROM AUTHOR]

In the current investigation, crude laccase was utilized to decolorize the leather azo dyes (AB 113 and AB 52). The crude laccase was extracted from Penicillium chrysogenum strain TSV1 pH 5.5, temp. at 32°C for 7 days in a liquid culture medium, and shows maximum enzyme activity of 7.92 U/mL. The crude laccase has been applied and achieved maximum decolorization efficiency up to 83% and 69% respectively for AB 113 and AB 52 within 48-h duration. Furthermore, the addition of 1 mM HOBT mediator has enhanced the dye decolorization rate up to 98% and 85% within 24-h duration respectively for both dyes. Furthermore, the decolorization was confirmed by UV-Vis spectra analysis and has showed peaks at 570 nm and 580 nm which corresponded to chromophores respectively for both dyes and disappeared after decolorization. The bands were observed at the bending region from 1561 to 1494 cm−1 and from 1344 to 1031 cm−1 by FTIR analysis corresponding to an aromatic ring of AB 113. Similarly, the peaks observed at 1589cm−1 and 1451cm−1 corresponded to the aromatic region of AB 52 and indicated the presence of -N=N-. These bands disappeared and new bands appeared after decolorization. The UPLC analysis has shown different peaks at various retention times for both dyes and these peaks disappeared after decolorization. Furthermore, the COD (86.5 ± 5% and 83.52 ± 3%) and TOC (87.86% and 83.82%) have been reduced for both dyes. The toxicity of the dyes also has been reduced after decolorization. The laccase was a more potential enzyme for the decolorization of azo dyes. [ABSTRACT FROM AUTHOR]

Podaxis pistillaris is neutraceutically, cosmoceutically and medicinally recognised macrofungus. During this research work, this edible mushroom was systematically characterised. Its culturability, laccase production, and dye decolorisation potential were evaluated and optimised. Among the different media tested, PDA proved as most efficient medium for culturability of P. pistillaris. Conditions for laccase production were optimised in submerged state fermentation. Maximum laccase secretion was noted after 14th day of Incubation at 35 °C with 130 rpm and 5 pH of medium. Fructose and ammonium-phosphate was found as best carbon and nitrogen source, while wheat straw revealed as good ligno-cellulosic source for strengthening laccase production. Congo-red dye decolorisation capability by crude laccase enzyme was evaluated and found maximum decolorisation potential (92.2%) after 288h of incubation. From this pilot study, it was confirmed that this edible macrofungus has culturability, laccase production and dye decolorisation attributes that will further contribute in delignification, biosorption and bioremediation. [ABSTRACT FROM AUTHOR]

Background: Hazardous synthetic dye wastes have become a growing threat to the environment and public health. Fungal enzymes are eco-friendly, compatible and cost-effective approach for diversity of applications. Therefore, this study aimed to screen, optimize fermentation conditions, and characterize laccase from fungal endophyte with elucidating its ability to decolorize several wastewater dyes. Results: A new fungal endophyte capable of laccase-producing was firstly isolated from cladodes of Opuntia ficus-indica and identified as T. harzianum AUMC14897 using ITS-rRNA sequencing analysis. Furthermore, the response surface methodology (RSM) was utilized to optimize several fermentation parameters that increase laccase production. The isolated laccase was purified to 13.79-fold. GFC, SDS-PAGE revealed laccase molecular weight at 72 kDa and zymogram analysis elucidated a single band without any isozymes. The peak activity of the pure laccase was detected at 50 °C, pH 4.5, with thermal stability up to 50 °C and half life span for 4 h even after 24 h retained 30% of its activity. The Km and Vmax values were 0.1 mM, 22.22 µmol/min and activation energy (Ea) equal to 5.71 kcal/mol. Furthermore, the purified laccase effectively decolorized various synthetic and real wastewater dyes. Conclusion: Subsequently, the new endophytic strain produces high laccase activity that possesses a unique characteristic, it could be an appealing candidate for both environmental and industrial applications. [ABSTRACT FROM AUTHOR]

Fungal infection in agricultural grains is a global problem, particularly if it is accompanied by mycotoxin production. In this study, the degradation of mycotoxins by laccase and manganese peroxidase was investigated. Aspergillus flavus, Aspergillus fumigatus, and Fusarium graminearum were recorded in infected maize grains. Aflatoxin B1 (AF B1) was detected (from 3.38 to 2.60 ppm) on the infected samples by fungi compared to other detected aflatoxins. Trichothecene (T-2) toxin and deoxynivalenol (DON) were recorded with concentrations ranging from 0.464 to 0.184 ppm and 0.370 to 0.214 ppm, respectively. The addition of laccase and manganese peroxidase to the inoculated medium with A. flavus and F. graminearum individually degraded the produced AF B1, B2, G1, G2, T-2 toxin, and DON from 5.0, 1.33, 0.76, 0.61, 0.63, and 0.38 ppm to 2.77, 0.66, 0.37, 0.15, 0.45, and 0.38 ppm using laccase, to 3.08, 1.25, 0.61, 0.39, 0.55, and 0.36 ppm using manganese peroxidase. The computational technique (docking) demonstrated the laccase and manganese peroxidase activities on aflatoxin and DON degradation. Consequently, the results suggested that laccase (PDB ID: 1HFU) and manganese peroxidase (PDB ID: 1MNP) promise innovative activity toward aflatoxin degradation, while 1HFU has more effect than 1MNP on DON degradation. [ABSTRACT FROM AUTHOR]

The laccase activity of a low-temperature strain of Volvariella brumalis was studied using different lignocellulosic biomasses for liquid fermentation. The results showed that the laccase activity induced by wheat bran or pressed rapeseed residue was higher than the other auxiliary cultivation substrates. Compared to other primary cultivation substrates, Quercus acutissima sawdust and rice straw not only stimulated V. brumalis to produce more laccase in liquid fermentation, but also promoted better mycelial growth in solid-state fermentation. Therefore, these agricultural and forestry wastes should be prioritized as culturing materials of V. brumalis for laccase high-secretion and hyphal growth to increase production of V. brumalis. [ABSTRACT FROM AUTHOR]

Analysis of the structure of two-domain laccase ScaSL from Streptomyces carpinensis VKM Ac-1300 (with a middle-redox potential) revealed determinants that could affect the increased potential of ScaSL. Site-directed mutagenesis of the ScaSL laccase was carried out, and mutants H286A, H286T, H286W, and F232Y/F233Y were obtained. Replacement of His 286 with Ala led to a decrease in redox potential (0.45 V) and an increase in stability at pH 9 and 11; replacement with Thr led to an increase in redox potential (0.51 V) but to a decrease in the thermal stability of the protein; replacement with Trp did not affect the enzyme properties. Replacement of Phe residues 232 and 233 with Tyr led to a shift in enzyme activity to the acidic pH range without changing the redox potential and a decrease in the thermostability and pH stability of the enzyme. All mutants more efficiently oxidized phenolic substrate 2,6-DMP and were able to participate in direct electron transfer (DET) with MWCNT-modified electrodes. The F232Y/F233/Y mutant was unable to degrade triphenylmethane dyes without a mediator but showed a greater degree of decolorization of azo dyes in the presence of the mediator. The crystal structure of laccase with the highest potential was determined with high resolution. [ABSTRACT FROM AUTHOR]

Laccase is a copper‐containing polyphenol oxidase that can oxidize phenolic and non‐phenolic organic substrates. In the past decades, laccases had received considerable attention because of the ability to degrade various organic substances. Based on the codon preference of the Pichia pastoris expression system, this study optimized the gene structure of the laccase gene Lcc1 from Coprius cinerea through synthetic biology methods. A new gene Lcc1I was synthesized and heterologously expressed in P. pastoris. After 3 days of cultivation in a shake flask at 30°C, the transformants produced at a yield of 890 mg L−1protein. The highest production level of the recombinant laccase was 2760 U L−1. The molecular mass of the recombinant laccase was estimated at 60 kDa. The enzyme showed highest activity at pH 3.4 and 45°C. It possessed better stability at higher pH and lower temperature condition. Using 2,2'‐azino‐bis‐(3‐ethylbenzothiazoline)−6‐sulphonate (ABTS) as the substrate, the Km and Vmax values were 0.136 mM and 9778 μM min−1 mg−1, respectively. The recombinant laccase could directly oxidize some triphenylmethane dyes like leuco‐crystal violet (LCV) and leuco‐malachite green (LMG). With the help of ABTS mediator, it could oxidize and degrade 77.7% crystal violet (CV) and 79.2% malachite green (MG) within 1 h. Our results indicate that optimization of the laccase gene achieves good expression results in the host system. The dye degradation model constructed in this study may also be applied to the degradation of other organic pollutants and toxic substances, providing new solutions for environmental remediation against the increasingly severe environmental pollution. Summary: This study optimized the gene structure of the laccase gene Lcc1 from Coprius cinerea using synthetic biology methods, which could be successfully expressed in Pichia pastoris.The recombinant laccase possessed better substrate affinity, reaction rate and capable of efficient degradation of triphenylmethane dyes.In the current context of increasingly severe organic pollution, the degradation model of dyes constructed in this study can be widely applied to environmental remediation dealing with various pollutantsCompared with traditional methods, the advantages including higher efficiency, lower cost, easier operation, and without secondary pollution, providing a new solution for environmental pollution. [ABSTRACT FROM AUTHOR]

Laccase, a copper-containing oxidoreductase, has close links with secondary metabolite biosynthesis in plants. Its activity can affect the synthesis and accumulation of secondary metabolites, thereby influencing plant growth, development, and stress resistance. This study aims to identify the grape laccases (VviLAC) gene family members in grape (Vitis vinifera L.) and explore the transcriptional regulatory network in berry development. Here, 115 VviLACs were identified and divided into seven (Type I–VII) classes. These were distributed on 17 chromosomes and out of 47 VviLACs on chromosome 18, 34 (72.34%) were involved in tandem duplication events. VviLAC1, VviLAC2, VviLAC3, and VviLAC62 were highly expressed before fruit color development, while VviLAC4, VviLAC12, VviLAC16, VviLAC18, VviLAC20, VviLAC53, VviLAC60 and VviLAC105 were highly expressed after fruit color transformation. Notably, VviLAC105 showed a significant positive correlation with important metabolites including resveratrol, resveratrol dimer, and peonidin-3-glucoside. Analysis of the transcriptional regulatory network predicted that the 12 different transcription factors target VviLACs genes. Specifically, WRKY and ERF were identified as potential transcriptional regulatory factors for VviLAC105, while Dof and MYB were identified as potential transcriptional regulatory factors for VviLAC51. This study identifies and provides basic information on the grape LAC gene family members and, in combination with transcriptome and metabolome data, predicts the upstream transcriptional regulatory network of VviLACs. [ABSTRACT FROM AUTHOR]

Laccases are extracellular multicopper oxidases that react with a broad range of aromatic substrates and are used for many biotechnological applications. Recently, microalgal laccases were discovered and started to be characterized in some Chlorophyceae (Tetracystis aeria and a few other species). A volumetric activity of maximum 27 U L-1 could be reached with Chlamydomonas moewusii, which is largely insufficient to compete with fungi and heterologous expression systems. Here, the acidophilic green microalga Chlamydomonas pitschmannii was shown to be a new promising source of laccase competing with fungi in terms of secretion yields. By modulating culture pH and CO2 supply, laccase volumetric activity in the supernatant could be increased from 12 to 459 U L-1. Laccase-containing supernatants were found to oxidize many phenolic and non-phenolic substrates with an efficiency that was pH-dependent. 1D SDS-PAGE was achieved and lighted up that C. pitschmannii laccase is a glycosylated protein. Functional measurements pointed out the participation of glycosylation in functional enzymatic regulation and integrity. Two bands of about 50 and 45 kD were detected that presumably corresponded to laccase. In agreement with previous studies in T. aeria, we hypothesize that C. pitschmannii laccase is a heterodimer, a feature that denotes with most known laccases, essentially monomeric. Altogether, those results demonstrate that efforts of discovery and characterization of microalgal laccases must be continued with regards to the amazing potential they offer for biotechnological applications. [ABSTRACT FROM AUTHOR]

Synthetic dyes such as azo dyes are significant pollutants in the wastewater released from various textile industries. The low biodegradability and production from synthetic sources with high shelf life make azo dyes a challenging material for degradation. This study used chemically mutated Aspergillus terrus in the laccase production under solid-state fermentation using sugarcane bagasse. Initially, the wild-type strain produced a laccase activity of 4.12 U/mL. Later, the alkaline pretreatment of sugarcane bagasse showed a significant increase in laccase activity by 38.9%. Further, random mutagenesis treatment with 100 mM EMS generated a hyper laccase-producing strain with a 2.3-fold increment in laccase activity compared to the wild-type strain. The enzyme displayed optimal activity at pH 6.5 and 35 °C. The metal ions such as Fe3+ (29.4 U/mL), Fe2+ (20.8 U/mL) and Cu2+ (18.05 U/mL) showed positive effects on laccase activity. The crude laccase was used to bioremediate Congo red, a prominent azo dye used in textile and pharmaceutical industries. The preliminary studies with a crude enzyme displayed 68.86% dye decolourization after 24 h of incubation. Additionally, with Taguchi orthogonal array optimization experiments, the maximal dye decolorization of 78.24% was achieved by maintaining crude enzyme concentration (20 U), dye concentration (25 mg/L) and pH 4.5. [ABSTRACT FROM AUTHOR]

Bisphenols as an important industrial raw material has endocrine disruption, reproductive toxicity, and neurotoxicity. Laccase (Lac) has demonstrated excellent catalytic oxidation performance for phenolic compounds. Micro-nano bubbles (MNB) have been extensively used in wastewater treatment, and the high efficiency of MNB-assisted laccase (MNB-Lac) as a hybrid technique for removing bisphenols from water has been established. In this study, MNB-Lac system was used to degrade bisphenols including bisphenol A (BPA), bisphenol B (BPB), bisphenol C (BPC), bisphenol E (BPE), and bisphenol F (BPF). A comparative analysis was conducted to evaluate the degradation of individual and mixed bisphenols by MNB-Lac. The results indicated that the degradation effect on all individual bisphenols was superior. Notably, BPC consistently demonstrated higher selectivity in the mixed degradation process. In the mixed bisphenol degradation process, a distinct degradation sequence between BPE and BPF was observed. The affinity order of BPA and BPE was found to be inconsistent with their individual degradation order, and the degradation reaction was found to conform to second-order kinetics. By gas chromatography mass spectrometry detection, it was found that the degraded products of BPA, BPB, BPC, BPE, and BPF were ring and chain compounds, and the degradation pathways of the five substances were also maintenance ring structure and direct ring opening. The possible transformation relationship of mixed bisphenols during degradation by MNB-Lac was proposed. Moreover, the industrial application of MNB-Lac was evaluated by increasing the wastewater volume of BPA. [ABSTRACT FROM AUTHOR]

Laccases act as green catalysts for oxidative cross-coupling of phenolic antioxidnt compounds, but low stability and non-recyclability limit its application. To address that, metal–organic frameworks Cu-BTC and Cr-MOF were synthesized as supports to immobilize the efficient laccase from Cerrena sp. HYB07. The Brunauer–Emmett–Teller surface area of Cu-BTC and Cr-MOF were 1213.2 and 907.1 m2/g, respectively. The two carriers respectively presented pore diameters of 1.2–10 nm and 1.4–12 nm as octahedron, indicating nano-scale mesoporosity. These Cu-BTC and Cr-MOF carriers could adsorb laccase with enzyme loading of 1933.2 and 1564.4 U/g carrier, respectively. The stability and organic solvent tolerance of Cu-BTC-laccase and Cr-MOF-laccase were both obviously improved compared to free laccase. Thermal inactivation kinetics showed that both the two immobilized laccases displayed lower thermal inactivation rate constants. Importantly, the Cu-BTC-laccase and Cr-MOF-laccase both showed much higher activity for cross-coupling of ethyl ferulate than free laccase, which had 2.5-fold higher cross-coupling efficiency than that by free laccase. The ethyl ferulate coupling product was also analyzed by mass spectroscopy and the synthesis pathway of ethyl ferulate dimer was proposed. The cross coupling of ethyl ferulate required the formation of radical intermediates of ethyl ferulate generated by laccase mediated oxidation. This work paved the way for MOFs immobilized laccase for cross coupling of antioxidant phenols. [ABSTRACT FROM AUTHOR]

Polyethylene, one of the most used petroleum-derived polymers, causes serious environmental pollution. The ability of Pleurotus ostreatus to degrade UV-treated and untreated recycled and unused (new) low-density polyethylene (LDPE) films was studied. We determined the fungal biomass production, enzyme production, and enzyme yield. Changes in the chemical structure and surface morphology of the LDPE after fungal growth were analyzed using FTIR spectroscopy and SEM. Functional group indices and contact angles were also evaluated. In general, the highest Lac (6013 U/L), LiP (2432 U/L), MnP (995 U/L) and UP (6671 U/L) activities were observed in irradiated recycled LDPE (IrRPE). The contact angle of all samples was negatively correlated with fermentation time; the smaller the contact angle, the longer the fermentation time, indicating effective biodegradation. The IrRPE samples exhibited the smallest contact angle (49°) at 4 weeks, and the samples were fragmented (into two pieces) at 5 weeks. This fungus could degrade unused (new) LDPE significantly within 6 weeks. The biodegradation of LDPE proceeded faster in recycled than in unused samples, which can be enhanced by exposing LDPE to UV radiation. Enzymatic production during fungal growth suggest that LDPE degradation is initiated by laccase (Lac) followed by lignin peroxidase (LiP), whereas manganese peroxidase (MnP) and unspecific peroxygenase (UP) are involved in the final degradation process. This is the first experimental study on the fungal growth and its main enzymes involved in LDPE biodegradation. This fungus has great promise as a safe, efficient, and environmentally friendly organism capable of degrading LDPE. [ABSTRACT FROM AUTHOR]

Laccases are enzymes with low substrate specificity that in certain cases require the presence of a mediator in order to work properly. Therefore, this paper investigated the degradation of Orange G, Ponceau 4 R and Methyl Red in the presence of laccase isolated from Trametes versicolor and laccase-ABTS system. Laccase, in high concentration, was able to oxidize only Orange G and Ponceau 4 R, with a degree of decolorization less than 10 % in 20 min. In the presence of laccase-ABTS system, the reaction is much faster, and at least 40 % of dyes were degraded in 15 min. A kinetic model accounting for enzymatic oxidation of all dyes, including a step for enzyme operational inactivation, was proposed. This study proves that we can use a single kinetic model for the oxidation of all dyes in the laccase-ABTS system. [Display omitted] • Kinetics of Orange G, Ponceau 4 R, and Methyl Red oxidation by laccase and laccase-ABTS system was studied. • Operational inactivation of laccase was highlighted for all systems. • Kinetic models for dye degradation by laccase, and laccase-ABTS system were proposed. • The dyes oxidation can be attributed both to the oxidation by a complex between laccase and ABTS, and by ABTS ∙ + . [ABSTRACT FROM AUTHOR]

This study explores the Laccase gene (AaLac) family along with AaLac1 expression in hairy roots of A. annua. 42 AaLacs were identified by detecting three conserved domains: Cu-oxidase, Cu oxidase-2, and Cu oxidase-3. The physicochemical properties show that AaLacs are proteins with 541–1075 amino acids. These proteins are stable, with an instability index less than 40. Phylogenetic and motif studies have shown structural variants in AaLacs, suggesting functional divergence. 22 AaLac cis-regulatory elements were selected for their roles in drought stress, metabolic modulations, defense, and stress responses. A comparison of AtLac and AaLac proteins showed that 11 AtLacs mitigates stress reactions. In silico expression, analysis of 11 AtLacs showed that AtLac84 may function under osmotic stress. Thus, the Homolog AaLac1 was selected by expression profiling. The real-time PCR results showed that AaLac1 enhances osmotic stress tolerance in shoot and root samples. It was also used to analyze AaLac1, ADS, and CYP71AV1 gene expression in hairy roots via induction. The transformed hairy roots exhibited a greater capacity for PEG-induced osmotic stress tolerance in contrast to the untransformed roots. The gene expression analysis also depicted a significant increment in expression of AaLac1, ADS, and CYP71AV1 genes to 3.8, 6.9, and 3.1 folds respectively. The transformed hairy roots exhibited a significant increase of 2.2 and 1.4 fold in flavonoid and phenolic content respectively. Also, lignin content and artemisinin content increased by 7.05 folds and 95.6% with respect to the control. Thus, transformed hairy roots of A. annua under PEG-induced osmotic stress demonstrate the involvement of the AaLac1 gene in stress responses, lignin biosynthesis, and secondary metabolism production. [ABSTRACT FROM AUTHOR]

This study investigated the decolorization and detoxification of a dye originating from a feather-dyeing house using the laccase enzyme. Efficient decolorization was achieved under a wide range of environmental conditions, including pH, temperature, enzyme loading, and dye concentration. The decolorization rate reached up to 98% within 10 min when the mediator acetosyringone was present. Decolorization was attributed to the degradation of the dye by laccase, as analyzed using liquid chromatography-mass spectrometry (LC–MS). At least three dominant intermediates (m/z 167.993, 194.475, 118.040) were identified, deriving from the original dye (m/z 521.044). Compared to the non-decolorized dye solution, the decolorized dye ones at various concentrations exhibited lower toxicity towards aerobic activated sludge (AS). This was evident from the significantly higher respiratory intensity of AS, with an O₂ uptake of 35 mg for the decolorized solution versus 11 mg for the non-decolorized solution after 12 h at a 100 mg/L dye concentration. The results suggest that laccase-catalyzed decolorization could serve as an effective pretreatment method for traditional activated sludge (AS)-based processes, thereby enhancing the overall treatment performance of dye wastewater. [ABSTRACT FROM AUTHOR]

Laccases are multi‐copper oxidases (MCOs) that oxidize a broad range of substrates while reducing molecular oxygen to water. Although much effort has been made to elucidate the catalytic mechanism of laccases, information about reactive catalytic intermediates during catalysis is not yet fully understood. Herein, hydroquinone (HQ) polymerization catalyzed by prokaryotic small laccase (SLAC) was investigated by electron paramagnetic resonance (EPR) spectroscopy to provide more information on the catalytic mechanism. Briefly, free radical intermediates during the catalysis were investigated by real‐time in situ EPR measurement to monitor the formation and transformation of free radicals. A paramagnetic species was identified which was attributed to a copolymer formed by hydroquinone, benzoquinone, and semiquinone radical. In addition, the low‐temperature EPR spectrum of the trinuclear copper center during catalysis not only revealed tentative rotational motion of the histidine imidazole rings coordinating the TNC upon electron uptake but also provided evidence of the formation of oxygen bridge at TNC during the reaction, represented by the observation of a new type 2 copper component featured larger g// values and smaller A// values. Together, EPR spectroscopic insights into the catalytic intermediates during enzymatic hydroquinone polymerization have extended the knowledge of the biophysical characteristics and catalytic mechanism of SLAC. [ABSTRACT FROM AUTHOR]

Chemoselective arylation of 5-aminopyrazoles was performed through oxidative formation of orthoquinones from catechols catalyzed by Myceliophthora thermophila laccase (Novozym 51003), and subsequently nucleophilic attack of 5-aminopyrazole to the catechol intermediates. The C-4 arylated products were obtained under extremely mild conditions without the need for amine protection or halogenation of the substrates. From this method, 10 derivatives with moderate to good efficiency (42–94%) were prepared. [ABSTRACT FROM AUTHOR]

Laccase is a multicopper enzyme that plays a unique role in bioremediation of environmental pollutants. Bacteria were isolated from hospital wastewater and screened for laccase production. The laccase production process condition was optimised, and the laccase obtained was characterised. The 16S rRNA molecular analysis conducted on the best laccase producer revealed a Bacillus sp. NU2 identified. The process conditions: pH5, 45°C, 100 rpm, 5% inoculum, and growth constituents viz: tangerine peel and wheat bran agro-wastes, beef extract, ammonium persulfate, glucose, galactose, xylose, sorbitol, fructose carbon sources; and 4-aminophenol inducer optimally stimulated laccase production. The Bacillus sp. NU2 laccase was optimal at pH and temperature conditions of 8.0°C and 60°C, with a noteworthy pH and thermal stability observed. Furthermore, NU2 laccase showed a moderate/high tolerance and relative activity effect on various chemical inhibitors, halides and surfactant of triton x-100 (105 ± 0.92%), PMSF (107 ± 0.81%), and NaCl (94 ± 0.81%) at 1, 3, and 6 (mM) concentration. Additionally, NU2 laccase maintained a relative activity of 101%, 104%, and 102% for Mg2+, Zn2+, and Fe3+ at 1, 3, and 6 mM respectively. Acetone and propanol significantly upregulated laccase activity at 114 ± 0.0008% and 118.24 ± 0.35 and also at 30 and 20 (%) concentrations. Conclusively, the tolerant effect of Bacillus sp. NU2 laccase in pH, temperature, inhibitors and organic solvents suggests its potential for biotechnological application and promotion of a greener environment. [ABSTRACT FROM AUTHOR]

Continuous industrialization has raised daunting environmental concerns, and there is an urgent need to develop a sustainable strategy to tackle the contamination issues. Here, we report a supramolecular photoenzyme ensemble enabling the harvest of solar energy to remove contaminations in water. The well-sourced oxidoreductase, laccase, is confined into a photoactive hydrogen-bonded organic framework (PHOF) through an in situ encapsulation method. The direct electron migration between the oxidation center in a PHOF and the reduction center in laccase facilitates synergistic photoenzyme-coupled catalysis, showing two orders of magnitude higher activity than free laccase for pollutant degradation under visible light, without the need for sacrificial agents or costly co-mediators. Such high decontamination efficiency also surpasses the reported catalysts. The structure and decontamination function of this supramolecular photoenzyme ensemble remain highly stable in complex environment matrices, presenting desirable reusability and almost 100% conversion efficiency of pollutants for real sewage samples. Our conceptual photoenzyme hybrid catalyst offers important insights into green and sustainable water decontamination. [ABSTRACT FROM AUTHOR]

In this work, bovine serum albumin (BSA) and Aspergillus sp. laccase (LC) were encapsulated in situ within two lanthanide-based MOFs (TbBTC and GdBTC) through a green one-pot synthesis (almost neutral aqueous solution, T = 25 °C, and atmospheric pressure) in about 1 h. Pristine MOFs and protein-encapsulated MOFs were characterized through wide angle X-ray scattering, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared and Raman spectroscopies. The location of immobilized BSA molecules, used as a model protein, was investigated through small angle X-ray scattering. BSA occurs both on the inner and on the outer surface of the MOFs. LC@TbBTC, and LC@GdBTC samples were also characterized in terms of specific activity, kinetic parameters, and storage stability both in water and acetate buffer. The specific activity of LC@TbBTC was almost twice that of LC@GdBTC (10.8 μmol min-1 mg-1vs. 6.6 μmol min-1 mg-1). Both biocatalysts showed similar storage stabilities retaining -60% of their initial activity after 7 days and -20% after 21 days. LC@TbBTC dispersed in acetate buffer exhibited a higher storage stability than LC@GdBTC. Additionally, terbium-based MOFs showed interesting luminescent properties. Together, these findings suggest that TbBTC and GdBTC are promising supports for the in situ immobilization of proteins and enzymes. [ABSTRACT FROM AUTHOR]

Background: Laccases can oxidize a broad spectrum of substrates, offering promising applications in various sectors, such as bioremediation, biomass fractionation in future biorefineries, and synthesis of biochemicals and biopolymers. However, laccase discovery and optimization with a desirable pH optimum remains a challenge due to the labor-intensive and time-consuming nature of the traditional laboratory methods. Results: This study presents a machine learning (ML)-integrated approach for predicting pH optima of basidiomycete fungal laccases, utilizing a small, curated dataset against a vast metagenomic data. Comparative computational analyses unveiled the structural and pH-dependent solubility differences between acidic and neutral-alkaline laccases, helping us understand the molecular bases of enzyme pH optimum. The pH profiling of the two ML-predicted alkaline laccase candidates from the basidiomycete fungus Lepista nuda further validated our computational approach, showing the accuracy of this comprehensive method. Conclusions: This study uncovers the efficacy of ML in the prediction of enzyme pH optimum from minimal datasets, marking a significant step towards harnessing computational tools for systematic screening of enzymes for biotechnology applications. [ABSTRACT FROM AUTHOR]

BsCotA laccase is a promising candidate for industrial application due to its excellent thermal stability. In this research, our objective was to enhance the catalytic efficiency of BsCotA by modifying the active site pocket. We utilized a strategy combining the diversity design of the active site pocket with molecular docking screening, which resulted in selecting five variants for characterization. All five variants proved functional, with four demonstrating improved turnover rates. The most effective variants exhibited a remarkable 7.7-fold increase in catalytic efficiency, evolved from 1.54 × 105 M−1 s−1 to 1.18 × 106 M−1 s−1, without any stability loss. To investigate the underlying molecular mechanisms, we conducted a comprehensive structural analysis of our variants. The analysis suggested that substituting Leu386 with aromatic residues could enhance BsCotA's ability to accommodate the 2,2′-azino-di-(3-ethylbenzothiazoline)-6-sulfonate (ABTS) substrate. However, the inclusion of charged residues, G323D and G417H, into the active site pocket reduced kcat. Ultimately, our research contributes to a deeper understanding of the role played by residues in the laccases' active site pocket, while successfully demonstrating a method to lift the catalytic efficiency of BsCotA. Key points: • Active site pocket design that enhanced BsCotA laccase efficiency • 7.7-fold improved in catalytic rate • All tested variants retain thermal stability [ABSTRACT FROM AUTHOR]

With the development of industry and modern manufacturing, nondegradable low-density polyethylene (LDPE) has been widely used, posing a rising environmental hazard to natural ecosystems and public health. In this study, we isolated a series of LDPE-degrading fungi from landfill sites and carried out LDPE degradation experiments by combining highly efficient degrading fungi in pairs. The results showed that the mixed microorganisms composed of Alternaria sp. CPEF-1 and Trametes sp. PE2F-4 (H-3 group) had a greater degradation effect on heat-treated LDPE (T-LDPE). After 30 days of inoculation with combination strain H-3, the weight loss rate of the T-LDPE film was approximately 154% higher than that of the untreated LDPE (U-LDPE) film, and the weight loss rate reached 0.66 ± 0.06%. Environmental scanning electron microscopy (ESEM) and Fourier transform infrared spectroscopy (FTIR) were used to further investigate the biodegradation impacts of T-LDPE, including the changes on the surface and depolymerization of the LDPE films during the fungal degradation process. Our findings revealed that the combined fungal treatment is more effective at degrading T-LDPE than the single strain treatment, and it is expected that properly altering the composition of the microbial community can help lessen the detrimental impact of plastics on the environment. [ABSTRACT FROM AUTHOR]

Taste and odor (T&O) compounds have emerged as crucial parameters for assessing water quality. Therefore, identifying effective methodologies for the removal of these compounds is imperative. In this study, an effective approach utilizing laccase assisted by a micro-electric field was developed for the degradation of 2-methylisoborneol (2-MIB). For this purpose, the optimal conditions for the laccase-catalyzed degradation of 2-MIB were determined, and they were pH 4.0, 25 °C, 150 rpm, 0.1 U/mL of laccase, and 200 ng/L of 2-MIB. Under these specified conditions, the degradation efficiency of 2-MIB was approximately 78% after a 4 h reaction period. Subsequently, the introduction of an electric field yielded a synergistic effect with the enzyme for 2-MIB degradation. At an electric current intensity of 0.04 A over a 4 h duration, the degradation efficiency increased to 90.78%. An analysis using SPME-GC/MS provided information on the degradation intermediates of 2-MIB resulting from laccase-catalyzed degradation, electrocatalytic degradation, and micro-electric-assisted laccase degradation. The potential degradation pathways of 2-MIB illustrated that these three methods result in common degradation products, such as capric aldehyde, nonylaldehyde, and 2-ethylhexanol, and their final products include 3-pentanone, acetone, and 2-butanone. This study provides an enzyme–electrochemical method for the efficient and rapid degradation and removal of 2-MIB. The strategy of laccase catalysis assisted by a micro-electric field has good potential for the removal of pollutants from the natural environment. [ABSTRACT FROM AUTHOR]

Oyster mushroom spherical virus (OMSV) is a mycovirus that inhibits mycelial growth, induces malformation symptoms, and decreases the yield of fruiting bodies in Pleurotus ostreatus. However, the pathogenic mechanism of OMSV infection in P. ostreatus is poorly understood. In this study, RNA sequencing (RNA-seq) was conducted, identifying 354 differentially expressed genes (DEGs) in the mycelium of P. ostreatus during OMSV infection. Verifying the RNA-seq data through quantitative real-time polymerase chain reaction on 15 DEGs confirmed the consistency of gene expression trends. Both Gene Ontology and Kyoto Encyclopedia of Genes and Genomes analyses highlighted the pivotal role of primary metabolic pathways in OMSV infection. Additionally, significant changes were noted in the gene expression levels of carbohydrate-active enzymes (CAZymes), which are crucial for providing the carbohydrates needed for fungal growth, development, and reproduction by degrading renewable lignocellulose. The activities of carboxymethyl cellulase, laccase, and amylase decreased, whereas chitinase activity increased, suggesting a potential mechanism by which OMSV influenced mycelial growth through modulating CAZyme activities. Therefore, this study provided insights into the pathogenic mechanisms triggered by OMSV in P. ostreatus. [ABSTRACT FROM AUTHOR]

Tomato waste (TW) is a plentiful lignocellulosic resource, mainly composed of seeds and skins, that can be converted into high-value compounds. This study explored the enhancement of TW enzymatic and fungal biovalorization using novel ecofriendly approaches, including advanced technology, pulsed electric fields (PEF). Crude laccase first produced on TW was used for enzymatic treatment, and the white rot fungus Trametes versicolor K1 was used in fungal treatment under SmF (submerged) or SSF (semi-solid) fermentation conditions. The physical PEF treatment had increased tenfold sugar extraction yield (83.4 mg/g) and twofold polyphenol extraction yield (4.43 g/g), with respect to the control. PEF–laccase innovative combination, reported for the first time, has enhanced significantly sugar extraction yield (100.6 mg/g), twofold higher than those released from TW after laccase treatment alone. However, the PEF treatment had no effect on polyphenol extraction yield when combined to laccase or fungal treatments. The treated TW was subjected to polysaccharide enzymatic hydrolysis. The combination of PEF with laccase or fungal treatment did not impact sugar yields; however, it allowed polyphenol liberation. During fungal treatment (i.e., T. versicolor K1 grown on TW), comparable maximal laccase activities of 2574.28 U/L and 2577.06 U/L were measured in the culture supernatants, in SmF and SSF conditions, respectively. The findings demonstrate the high potential of PEF for recovering phenols and sugars. When combined to fungal treatment, it offers high yields of valuable products, making it a potential cost-effective approach, providing new prospects for TW valorization. [ABSTRACT FROM AUTHOR]

Enzymatic modification of polysaccharides is an efficient and environmentally friendly method to enhance their bioactivities. Immobilized enzymes represent a technology that enables the reuse of enzymes and increase their stability. In this study, laccases from Trametes versicolor were covalently immobilized on CIMmultus® CDI monolithic column, which was employed to graft gallic acid (GA) onto the backbone of T40 dextran. 1.43 mg laccases were successfully immobilized, yielding a mass conversion rate of 32.17 %. The kinetic parameters of free and immobilized laccases were respectively 0.0056 and 0.1770 U for Vmax and 0.0121 and 0.7510 mmol·l−1 for Km. Remarkably, 91.29 % of the enzymatic activity of immobilized laccases was preserved after catalyzing 1200 ml of reactant. A central composite design was carried out to investigate the influence of T40 dextran concentration and flow rate on the phenolization. Response surface methodology was used for predicting the optimal conditions, showed that a 2.07 % mass ratio of phenolization could be achieved with 2 % dextran and a flow rate of 0.89 ml·min−1. The GA-dextran conjugate, produced under the best conditions, revealed a DPPH radical inhibition activity of 63.97 % and an IC 50 of 73.39 µg·ml−1. This work describes a new IMER for ecofriendly producing phenolized polysaccharides. [Display omitted] • Laccases were covalently immobilized on CDI CIMmultus® monolithic column. • Immobilized laccases reactor was used to add phenol groups to T40 dextran. • The effects of flow rate and substrate concentration on phenolization were explored. • Response surface methodology (RSM) was used to predict optimal operation parameters. • The GA-dextran conjugate exhibited antioxidant activity. [ABSTRACT FROM AUTHOR]

[Display omitted] The industrial applications of enzymes are usually hindered by the high production cost, intricate reusability, and low stability in terms of thermal, pH, salt, and storage. Therefore, the de novo design of nanozymes that possess the enzyme mimicking biocatalytic functions sheds new light on this field. Here, we propose a facile one-pot synthesis approach to construct Cu-chelated polydopamine nanozymes (PDA-Cu NPs) that can not only catalyze the chromogenic reaction of 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP), but also present enhanced photothermal catalytic degradation for typical textile dyes. Compared with natural laccase, the designed mimic has higher affinity to the substrate of 2,4-DP with K m of 0.13 mM. Interestingly, PDA-Cu nanoparticles are stable under extreme conditions (temperature, ionic strength, storage), are reusable for 6 cycles with 97 % activity, and exhibit superior substrate universality. Furthermore, PDA-Cu nanozymes show a remarkable acceleration of the catalytic degradation of dyes, malachite green (MG) and methylene blue (MB), under near-infrared (NIR) laser irradiation. These findings offer a promising paradigm on developing novel nanozymes for biomedicine, catalysis, and environmental engineering. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Chinese Institute of Food Science & Technology / Zhongguo Shipin Xuebao is the property of Journal of Chinese Institute of Food Science & Technology Periodical Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)