Search

This article provides a review of published literature on the concentration levels of potentially toxic elements (PTEs) in asbestos minerals like chrysotile, actinolite, amosite (asbestiform grunerite), anthophyllite, crocidolite (asbestiform riebeckite) and tremolite and their potential to release PTEs into groundwaters worldwide. A large number of PTEs, such as Fe, Cr, Ni, Mn, Co and Zn, may be hosted by asbestos minerals, and their release in the lung environment can cause different health problems as well as their intake via drinking water. The review highlights that amosite is the phase with the highest PTEs content, followed by crocidolite, actinolite, anthophyllite, tremolite and chrysotile. Chrysotile, tremolite, and anthophyllite contain higher levels of Cr, Ni, and Co, while Fe and Mn are more enriched in amosite and crocidolite. Actinolite contains a high concentration of all considered PTEs. High levels of Cr, Fe, Zn, Mn, and Ni were also detected in groundwater interacting with ophiolite rocks containing asbestos minerals. The three main recognized hydro-geochemical facies (Mg-HCO 3 , Ca-HCO 3 and Ca-OH), characterizing the ophiolite aquifers, show high levels of Cr and Ni, with values sometimes above the World health Organization (WHO) thresholds for drinking waters, which can cause adverse health effects in short and long term. The knowledge emerging from this work is a significant contribution to the already wide frame of understanding asbestos-related diseases and provide a strong scientific basis for further mineralogical and geochemical studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Health risks are often overlooked when the short-term consequences are not immediately apparent. During restoration work, cleaning actions can generate particles that pose health risks to workers through inhalation. This is particularly true in the case of asbestos fibres that might be spread out from the laser cleaning of buildings or heritage artifacts made of stone, such as serpentinite and other ultramafic rocks, that have a high probability of containing asbestos (e.g., chrysotile, tremolite asbestos, actinolite asbestos). To show workers the importance of wearing proper protection to prevent health injuries, several serpentinite samples, ascertained to contain asbestos minerals by specific investigations, have been laser ablated using ad hoc modified equipment in order to collocate a HEPA filter prone to collect all dust emitted during ablation. The powder deposited on the surface of these filters after laser ablation was analyzed, by Powder X -ray Diffraction (PXRD), Transmission Electron Microscopy combined with Energy Dispersive Spectroscopy (TEM/EDS), micro-Raman spectroscopy (μ-Raman) and Fourier-transform infrared spectroscopy (FTIR/ATR). The results confirmed the presence of asbestos fibres during the laser ablation of rocks containing Naturally Occurring Asbestos (NOA), emphasizing the importance of wearing appropriate personal protective equipment (PPE) during these procedures. Noteworthy, approximately 33 % of the analyzed fibres met the WHO criteria in size for respirable fibres. Furthermore, through our experiments, we also demonstrated that using tools that integrate filters into working tools would definitively further decrease the risk of fibres inhalation to workers., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Most of the artworks stored in museums are often kept in inappropriate climatic and environmental conditions that facilitate the formation and growth of microorganisms, such as fungi, which are responsible for many types of biodegradation phenomena. To mitigate and prevent these deteriorative processes, functionalized packaging materials can be used for the storage and handling of artworks. The aim of this study was to develop a potential anti-biodeterioration coating suitable for packaging purposes. TiO 2 and ZnO doped with different amounts of Ag (0.5 wt%, 1 wt%, and 3 wt%) were synthesized and dispersed in polyvinyl alcohol (PVA) and acrylic resin (Paraloid B72), then applied on different types of packaging materials (cellulose and the high-density spunbound polyethylene fiber Tyvek ® , materials that are frequently used as packaging in museums). Analytical investigations (SEM/EDS, Raman, FTIR, and XRD) were employed to assess dispersion on the packaging material. Furthermore, resistance against biodeteriogens was assessed using Cladosporium sp., a bioluminometer, to define the biocidal efficacy.

The main conservation problem of p-PVC artworks is phthalate-based plasticizer migration. Phthalate migration from the bulk to the surface of the materials leads to the formation of a glossy and oily film on the outer layers, ultimately reducing the flexibility of the material. This study aimed to develop a removable coating for the preservation of contemporary artworks and design objects made of plasticized polyvinyl chloride (p-PVC). Several coatings incorporating chitosan, collagen, and cellulose ethers were assessed as potential barriers to inhibiting plasticizer migration. Analytical techniques including optical microscopy (OM), ultraviolet/visible/near-infrared spectroscopy (UV/Vis/NIR), Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), and scanning electron microscopy (SEM) were utilized to evaluate the optical and chemical stability of selected coating formulations applied to laboratory p-PVC sheet specimens. Subsequently, formulations were tested on a real tangible example of a design object, ©Barbie doll, characterized by the prevalent issue of plasticizer migration. Furthermore, the results obtained with the tested formulations were evaluated by a group of conservators using a tailored survey. Finally, a suitable coating formulation capable of safeguarding plastic substrates was suggested.

Modern society and industrial development rely heavily on the availability of freshwater and minerals. Seawater reverse osmosis (SWRO) has been widely adopted for freshwater supply, although many questions have arisen about its environmental sustainability owing to the disposal of hypersaline rejected solutions (brine). This scenario has accelerated significant developments towards the hybridization of SWRO with membrane distillation-crystallization (MD-MCr), which can extract water and minerals from spent brine. Nevertheless, the substantial specific energy consumption associated with MD-MCr remains a significant limitation. In this work, energy harvesting was secured from renewables by hotspots embodied in the membranes, implementing the revolutionary approach of brine mining via photothermal membrane crystallization (PhMCr). This method employs self-heating nanostructured interfaces under solar radiation to enhance water evaporation, creating a carefully controlled supersaturated environment responsible for the extraction of minerals. Photothermal mixed matrix photothermal membranes (MMMs) were developed by incorporating graphene oxide (GO) or carbon black (CB) into polyvinylidene fluoride (PVDF) solubilized in an eco-friendly solvent (i.e., triethyl phosphate (TEP)). MMMs were prepared using non-solvent-induced phase separation (NIPS). The effect of GO or GB on the morphology of MMMs and the photothermal behavior was examined. Light-to-heat conversion was used in PhMCr experiments to facilitate the evaporation of water from the SWRO brine to supersaturation, leading to sodium chloride (NaCl) nucleation and crystallization. Overall, the results indicate exciting perspectives of PhMCr in brine valorization for a sustainable desalination industry.

Copper alloys objects can deteriorate their conservation state through irreversible corrosion. Since in the cultural heritage field every artefact is unique and any loss irreplaceable, solutions for conservation are needed. Hence, there is the necessity to stop the corrosion process with a suitable cleaning and conservation process to avoid further degradation processes without changing its morphological aspect. Chelating solutions are commonly used in chemical cleaning, mainly sodium salts of ethylenediaminetetraacetic acid (EDTA). However, it is resistant to water purification procedures and is not biodegradable. The goal of this study was to see if applying an ecologically friendly chelating agent as an alternative to EDTA cleaning procedures for cultural heritage was suitable. In this study were chosen six natural-based chelators that could be a new green non-toxic alternative to EDTA in corrosion-inhibiting properties. They were tested for cleaning copper artefacts exposed to atmospheric environment in polluted areas. The study considered four amino acids, a glucoheptonate (CSA) and an industrial green chelator (GLDA). The effectiveness was tested on corrosion copper compounds and on laboratory corroded copper sheets. Finally, the cleaning efficacy was tested on four Roman coins and a modern copper painting. To define the cleaning efficacy, surface analytical investigations have been carried out by means ICP-OES, UV-VIS, µ-Raman, spectro-colorimetry, XRD and FTIR. Among the amino acids, alanine was the most effective, showing an unaltered noble patina and a good effective copper recovery from corrosion patinas.

Over the centuries, humans have developed different systems to protect surfaces from the influence of environmental factors. Protective paints are the most used ones. They have undergone considerable development over the years, especially at the turn of the 19th and 20th centuries. Indeed, between the two centuries, new binders and pigments have been introduced in the constituent materials of paints. The years in which these compounds have been introduced and spread in the paint market allow them to be defined as markers for the dating of paints and painted artifacts. The present work is focused on the study of the paints of two vehicles of the Frankfurt Museum of Communication, i.e., a carriage and a cart, that was designed for the German Postal and Telecommunications Service roughly between 1880 and 1920. The characterization of the paints was performed through in situ non-invasive techniques, i.e., portable optical microscopy and multispectral imaging, and laboratory non-destructive techniques, i.e., FT-IR ATR spectroscopy and SEM-EDS. The analytical investigation and the comparison with the data reported in the literature allowed us to determine the historicity of the paints, which are all dated before the 1950s.

In the present study, a diagnostic approach was used to analyze the wall painting in the apse of the Sotterra church at Paola, in the province of Cosenza, Italy. The Sotterra church is nowadays located 6 m under the ground level. The presbytery area houses valuable pictorial evidence attributable to different phases. The oldest painting, visible in the apse area, dates back to the 11th-12th centuries, and it represents the subject of the present study, while the later decorations are placed in a chronological range from the 14th to the 15th centuries. Due to the peculiar environmental conditions, the conservation of subterranean sites represents a debated issue and must be properly investigated. For this reason, in this research, noninvasive analysis and laboratory-based methods were planned to obtain information about both the composition of original materials and the mechanisms and causes of alterations affecting the wall painting in the apse. Simultaneously, an environmental monitoring campaign of the indoor climate for the duration of nine months was conducted. The results highlighted the use of natural mineral pigments such as ochres and earths. The analysis of the painting stratigraphy revealed that the mural painting consists of two plaster layers characterized by lime-based binder. Moreover, the presence of a high amount of calcium sulfate has been discovered; this latter result, combined with the monitoring of the microclimate, allowed for the establishment of the crystallization and the condensation risks which occur on the investigated surfaces.

Mattel's Barbie dolls are the most famous and iconic dolls since 1959. Today, they are being collected by individuals and often conserved in museum environments due to their cultural and historical significance reflecting everyday life and historical events. However, just like most museum objects made of plastics, both historical and more recent Barbies show evident degradation phenomena. Firstly, Barbies were made of plasticized polyvinyl chloride (PVC), affected by the migration of additives-mostly the plasticizers-from the bulk phase to the outermost layer, appearing as a tacky and glossy exudate. Over the years, Barbies' polymeric constituents were replaced with more stable ones, whose additives migration is limited compared to PVC, even though still occurring. Multispectral photography in visible (VIS) and ultraviolet (UV) light, microscopical observations in VIS and UV light, and Fourier Transform Infrared spectroscopy in the Attenuated Total Reflectance mode (FT-IR ATR) were performed to characterize the constituent materials of 15 Barbies produced between 1959 and 1976, bridging the information gap on their processing over the years. The micro-invasive multi-analytical approach also allowed for the characterization of the degradation products, permitting the reference of the exudated compound to the specific bulk polymer.

Biodegradation is among the most common issues affecting Cultural Heritage stone materials in outdoor environments. In recent years, the application of chemical agents with biocidal activity has been the most usual practice when dealing with biofilm removal. In outdoor environments, the use of these biocides is not effective enough, since the materials are constantly exposed to environmental agents and atmospheric pollutants. Thus, it becomes necessary to protect the surface of Cultural Heritage works with antimicrobial coatings to either prevent or at least limit future colonization. In this study, innovative biocides-both natural and synthetic-were applied on a Roman mosaic located in the Archaeological Park of Ostia Antica to compare their effectiveness in removing the biological degradation affecting it. In addition, an antimicrobial coating called "SI-QUAT" was applied and analyzed in situ. SI-QUAT has recently entered the market for its prevention activity against biocolonization. The biocidal activity of these products was tested and monitored using different analytical portable instruments, such as the multispectral system, the spectrocolorimeter, and the bioluminometer. The analyses showed that promising results can be obtained using the combination of the biocide and the protective effect of Preventol ® RI50 and SI-QUAT.

In this study, the investigation of the oil painting on canvas I Tesori del Mare made by Plinio Nomellini in 1901 is presented. The aim of the research was threefold: the examination of the state of conservation in view of the restoration treatment, together with the identification of the causes of degradation and the study of the artistic technique. During the years, the artwork underwent several cleaning and fixing interventions, resulting in a patchy appearance of the surface. Nevertheless, the presence of consistent liftings persists, while the protective coating shows uneven chromatic alteration, both requiring further analysis. Multispectral imaging allowed for better visualization of the figuration's structure and the restored areas. The combined use of Raman spectroscopy, Fourier Transform Infrared spectroscopy in the Attenuated Total Reflection mode (FT-IR ATR), and Scanning Electron Microscopy coupled with an Energy Dispersive Spectroscopy (SEM/EDS) enabled better understanding of the stratigraphy through the identification of some pigments, the binder, and the aged varnish layer on the top. SEM/EDS highlighted the presence of zinc in both the ground layer and the paint layers. Furthermore, FT-IR ATR spectroscopy showed peaks related to metal soaps such as zinc stearate, which are known to cause severe delamination of the paint layers, explaining the recurring lifting issues. Eventually, the varnish layer was found to be acrylic resin, presumably mixed with varnishes applied in past restoration treatments.

Biodeterioration is an increasingly widespread process of degradation in the context of the conservation of cultural heritage, which involves a combination of physical and chemical damages together with an aesthetic alteration of materials. For biological damage on monuments caused by pathogens, macro- and microorganisms, chemical treatments are generally used, most of the time dangerous for the environment and for the operator. In this context, new eco-friendly products represent necessary tools for the treatment of biologically deteriorated stone surfaces and represent a new challenge in the field of restoration and conservation of materials of cultural interest. A relatively new class of unconventional green solvents are deep eutectic solvents (DESs), which have peculiar chemical-physical characteristics such as being non-toxic, ecological, biodegradable, non-flammable, and stable in the presence of water. Furthermore, many DESs known in the literature have also been shown to have a biocidal action. All these characteristics make DESs very advantageous and safe, and they could be used as biocidal agents for the treatment of biodegraded surfaces of cultural heritage, being non-toxic for the environment and for the operator. So far, they are used in various fields, but they still represent a novel frontier in the cultural heritage sector. The present research aims at testing five different DESs for the first time in cultural heritage. In particular, DESs are applied to a mosaic located in the Ostia Antica Archaeological Park (Rome), and their efficiency is compared with a biocide product currently used in the restoration field, namely, Preventol RI50, through luminescence, bio-luminometry, and spectrocolorimetry analysis. The preliminary results achieved show the different behaviors of each DESs, highlighting the possibility of employing them in the field of cultural heritage. Further studies have been planned, some of which are already underway, to investigate the properties of DESs and indicate any improvements to make them more effective, both as solvents and as biocides, and easy to apply to various types of materials. The results obtained from this first study are very promising for the use of DES as a new green strategy for cleaning and conservation treatments of materials in the field of cultural heritage.

A major challenge in coronavirus vaccination and treatment is to counteract rapid viral evolution and mutations. Here we demonstrate that CRISPR-Cas13d offers a broad-spectrum antiviral (BSA) to inhibit many SARS-CoV-2 variants and diverse human coronavirus strains with >99% reduction of the viral titer. We show that Cas13d-mediated coronavirus inhibition is dependent on the crRNA cellular spatial colocalization with Cas13d and target viral RNA. Cas13d can significantly enhance the therapeutic effects of diverse small molecule drugs against coronaviruses for prophylaxis or treatment purposes, and the best combination reduced viral titer by over four orders of magnitude. Using lipid nanoparticle-mediated RNA delivery, we demonstrate that the Cas13d system can effectively treat infection from multiple variants of coronavirus, including Omicron SARS-CoV-2, in human primary airway epithelium air-liquid interface (ALI) cultures. Our study establishes CRISPR-Cas13 as a BSA which is highly complementary to existing vaccination and antiviral treatment strategies., (© 2022. The Author(s).)

A multi-analytical approach was employed to study wall paintings located in the Sotterra church at Paola, in the province of Cosenza, Italy. The site is an underground church (hence the name of Sotterra, which means "under the earth") rediscovered in the second half of the 19th century, during the building works of the Madonna del Carmine church on the same area. This underground church preserves valuable mural paintings having different styles. The construction's dating and overlapped modifications made until the site was abandoned is also debated. A wall painting, depicting "The Virgin" as part of the "Annunciation and the Archangel Gabriel" present on the opposite side of the apse, was selected and investigated using both in situ and laboratory-based analysis. Preliminarily, the non-destructive investigations involved several analytical techniques (IR imaging, UV-Induced Visible Fluorescence, and X-ray Fluorescence analyses) that provided mapping and characterization of pictorial layers and first data about deterioration phenomena. On the basis of this information, a more in-depth study was conducted on micro-fragments aimed at characterizing the stratigraphy and to identify the artist's technique. Cross-sections were analysed using polarized optical microscopy and electron scanning microscopy coupled with energy-dispersive X-ray spectroscopy to obtain morphological and chemical information on the selected pictorial micro-fragments of the wall painting. The results allowed to characterize the pigments and provide better readability of the whole figure, revealing details that are not visible to the naked eye, important for future historical-artistic and conservative studies. The results represent the first step of a systematic archaeometric research aimed at supporting the ongoing historical-stylistic studies to distinguish the different building phases hypothesized for this religious site which remained buried for three centuries.

This research has focused on the assessment of the compositional features and mechanical and antifouling performances of two different mortars formulated for an underwater setting, and which contain Mg(OH) 2 as an antifouling agent. Regarding the mechanical characterization, the uniaxial compressive strength and flexural strength were measured. The composition of the materials was explored by differential thermal/thermogravimetric analysis (DTA-TG), X-ray diffraction analysis (XRPD), and scanning electronic microscopy (SEM) coupled with EDS microanalysis. The assessment of the biological colonization was evaluated with colorimetric analysis and image analysis. The results suggest that both mortars have good mechanical resistance once set underwater. Moreover, the adding of Mg(OH) 2 improves the resistance toward biofouling; this was observed both in laboratory and sea-exposed specimens.

Bio-colonization is a dynamic and multiphasic process headed by microorganisms. Conventional treatments to process affected stone materials include chemical biocides, whose formulations are mainly composed of quaternary ammonium salts(QAs), reported to be toxic for human health, dangerous for the environment, and not biodegradable. Accordingly, novel green and eco-friendly products are a promising alternative to treat stone materials deteriorated by microorganism colonization. In this study, the efficacy of pure essential oils (EOs) and a mix of EOs was assessed in situ and compared to a conventional biocide based on QAs, and two commercially green products based on EOs, which were taken as references, through application on a mosaic located at the Archaeological Park of Ostia Antica (Rome). The EO biocide efficacy was analyzed by ultraviolet induced luminescence, spectro-colorimetry and bio-luminometry analyses while the possibility of their permanence on simulated substrate was studied by FTIR spectroscopy. It was observed by FTIR analysis, that EOs considered volatile can leave a residue after the application; typical fingerprint bands at about 2926, 1510, and 1455 cm -1 were recorded in the EO spectra. Every tested oil was confirmed to have a biocide action although minimal in relation to the most conventional products based on QAs. The synergy of the essential oils revealed positive results, showing a stronger biocide efficacy. Further investigation should be carried out to develop the method of application and study of essential oils on cultural heritage.

In this study, a multimethodological analysis involving optical and physical/chemical diagnostic techniques and 3D photogrammetric survey was successfully applied, for the first time, on the large oil on canvas St. Michael defeating Evil painting by Mattia Preti, located inside the Church of the Immaculate Conception of Sarria (Floriana) in Malta. Pigmenting agents, binder media, and raw materials were first characterized, both at elemental and molecular scales, through X-ray fluorescence spectroscopy (XRF), optical stereo microscopy (SM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectroscopy (FT-IR), and gas chromatography coupled with mass spectrometry (GC-MS). The main goal was to properly identify the execution technique of this famous painter, the artist's palette, and possible nondocumented interventions. The 3D photogrammetric survey, on the other side, allowed us to noninvasively evaluate the extension of the areas that experienced restorations, and to properly map the domains of the different canvasses observed. The joints between canvasses suggested that the painting was folded and rolled up. In addition, the employment of a thermal camera gave evidence of the different consolidating material injection points used during the restoration to strengthen the painting. The obtained results offer useful information for the development of optimized restoration and conservation strategies to be applied and provide, at the same time, answers to open questions related to provenance and dating of the investigated artwork., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Urban art is a form of artistic visual expression and communication that is created in the street and generally in the public dimension of urban spaces. Often these kinds of artworks are in outdoor environments, and they usually suffer from atmospheric weathering and anthropic vandalism. Recently, several strategies have been used to limit or remove the effects of such vandalism. Currently, the use of quartz paints is growing among artists; such paints after setting are more porous and rough on the surface with respect to regular paints. The aim of the study is to assess the performance of anti-graffiti coatings on quartz artworks paints. Two anti-graffiti products were chosen, and their behaviors were assessed in the laboratory by means of contact angle measurement, water capillary test, colorimetric analysis, and optical and electron microscopy. Results showed good water repellence efficacy of the tested products, demonstrating that they are suitable for the protection of urban art, but at least two applications on the surface are needed to achieve good performance.

Antarctica represents a unique natural laboratory for ecotoxicological studies as it is characterized by low internal pollutants emissions but high external contamination levels. Indeed, warm temperatures promote pollutant evaporation (low latitudes), while cool temperatures (high latitudes) promote its deposition from the atmosphere on land/water. Metals are the most important pollutants in ecosystems and represent a serious and global threat to aquatic and terrestrial organisms. Since 2000, the risks posed by metals have led many States to ratify protocols aimed at reducing their emissions. Endemic Antarctic organisms represent excellent bioindicators in order to evaluate the efficacy of global measures adopted to mitigate pollutants release into the environment. In this study (supported by PNRA18-00133), we estimated the metals contamination levels and the metallothionein-1 expression in liver samples of two Antarctic fish species, the icefish Chionodraco hamatus and the red-blooded Trematomus bernacchii , collected in the same area during 2002 and 2014. The chosen area is located in the Ross Sea, a unique area as it is also isolated from the rest of the Southern Ocean. The analysis of contamination trends throughout this period showed, in both species, a significant increase over time of metals bioaccumulation and metallothionein-1 expression. In addition, our result clearly indicated that the detoxifying ability of the two organisms analyzed greatly differs, probably due to haemoglobin presence/absence. Our work represents an important early step to obtain valuable information in conservation strategies for both Antarctic and non-Antarctic ecosystems., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Marrone, La Russa, Brunelli, Santovito, La Russa, Barca and Pellegrino.)

Bloodstains found at crime scenes represent a crucial source of information for investigative purposes. However, in forensic practice, no technique is currently used to estimate the time from deposition of bloodstains. This preliminary study focuses on the age estimation of bloodstains by exploiting the color variations over time due to the oxidation of the blood. For this purpose, we used a colorimetric methodology in order to easily obtain objective, univocal and reproducible results. We developed two bloodstain age prediction algorithms: a short-term and a long-term useful model for the first 24h and 60 days, respectively. Both models showed high levels of classification accuracy, particularly for the long-term model. Although a small-scale study, these results improve the potential application of colorimetric analysis in the time-line reconstruction of violent criminal events.

Plastic is everywhere-increasing evidence suggests that plastic pollution is ubiquitous and persistent in ecosystems worldwide. Microplastic pollution in marine environments is particularly insidious, as small fragmentation can increase interaction with biota and food chain access. Of particular concern is the Mediterranean Sea, which has become a large area of accumulation of plastic debris, including microplastics, whose polymeric composition is still largely unknown. In this study, we analyzed the polymeric composition, particle size distribution, shape, and color of small plastic particles (ranging from 50 to 5000 µm) collected from the sea surface in six stations at the center of the Mediterranean Sea. We also described, for the first time, the different distribution of microplastics from coastal areas up to 12 nautical miles offshore. The microplastic density was 0.13 ± 0.19 particles/m 2 , with a marked prevalence of smaller particles (73% < 3 mm) and a peak between 1 and 2 mm (34.74%). Microplastics composition analysis showed that the most abundant material was polyethylene (69%), followed by polypropylene (24%). Moreover, we reported a comparison of the two Calabrian coasts providing the first characterization of a great difference in microplastic concentration between the Tyrrhenian and Ionian sides (87% vs. 13%, respectively), probably due to the complex marine and atmospheric circulation, which make the Tyrrhenian side an area of accumulation of materials originating even from faraway places. We demonstrate, for the first time, a great difference in microplastic concentration between Tyrrhenian and Ionian Calabrian coasts, providing a full characterization and highlighting that microplastic pollution is affected by both local release and hydrography of the areas.

In the last decades, many researchers investigated the relation between environmental pollution and the degradation phenomena on the built heritage, because of their rapid increase and growing harmfulness. Consequently, the identification of the main pollution sources has become essential to define mitigation actions against degradation and alteration phenomena of the stone materials. In this way, the present paper is focused on the study of the effect of air pollution on archaeological buildings in Historic Cairo. A multi-methodological approach was used to obtain information about the chemical composition of examined black crusts and to clarify their correlation with the air pollution, specifically the heavy metals and the carbonaceous fraction, their main sources, and their impact on the state of conservation of the studied sites. All specimens were characterized by polarized optical microscopy (POM), X-Ray Diffraction (XRD), Electron Probe Micro Analyser coupled with energy dispersive X-ray spectrometry (EPMA-EDS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and Thermo-gravimetric analysis (TGA). The study conducted on heavy metals and carbonaceous fraction showed that the greatest contribution of the accumulation of pollutants is attributable to vehicular traffic and industrial activities, the main polluting sources in Cairo city. Furthermore, the comparison with other studies conducted on the carbonaceous fraction in the black crusts coming from both European and non-European cities, has allowed to discriminate the contribution of the primary and secondary polluting sources. Finally, the correlation of the data obtained on the heavy metals and the carbonaceous fraction allowed to formulate important hypothesis about the processes of sulphation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The coronavirus disease 2019 (COVID-19) pandemic, caused by the SARS-CoV-2 virus, has highlighted the need for antiviral approaches that can target emerging viruses with no effective vaccines or pharmaceuticals. Here, we demonstrate a CRISPR-Cas13-based strategy, PAC-MAN (prophylactic antiviral CRISPR in human cells), for viral inhibition that can effectively degrade RNA from SARS-CoV-2 sequences and live influenza A virus (IAV) in human lung epithelial cells. We designed and screened CRISPR RNAs (crRNAs) targeting conserved viral regions and identified functional crRNAs targeting SARS-CoV-2. This approach effectively reduced H1N1 IAV load in respiratory epithelial cells. Our bioinformatic analysis showed that a group of only six crRNAs can target more than 90% of all coronaviruses. With the development of a safe and effective system for respiratory tract delivery, PAC-MAN has the potential to become an important pan-coronavirus inhibition strategy., Competing Interests: Declaration of Interests The authors have filed provisional patents via Stanford University related to this work., (Copyright © 2020 Elsevier Inc. All rights reserved.)

The Tomb of the Diver has been subject for many decades of fierce debate among archaeologists and classicists. Since its discovery in 1968, some scholars have considered it a unique example of the lost tradition of Greek painting, others have emphasized Etruscan or Italic parallels. More recently, a possible local production has been suggested. With the aim of trying to solve the archaeological question, an archaeometric comparison among this well-known artwork and several frescoed tombs coming from Hellenistic and Lucan necropolis was carried out. The multi-analytical study was focused on the identification of peculiar features of executive techniques and raw materials since the first period of the archaeological site. The analytical investigation has been preliminary based on a non-destructive approach, performed in-situ by portable equipment including imaging diagnostics and compositional spectroscopic techniques for identifying pigments and the conservation state of original painted surface; subsequently, a further deepening by using destructive techniques was performed in-lab for the mortar-based supports characterization. Archaeometric study suggested that technological choices slightly changed in a time span of about two centuries, highlighting important markers that allow clustering the contemporary artistic productions. Moreover, a comparison with mortars from temples decorations was provided to better understand the whole artistic context. The archaeometric data showed that the Tomb of the Diver could be traced back to a local artisanal tradition and therefore is neither Etruscan nor Greek, but the first and foremost an expression of the local elite culture of Paestum., Competing Interests: The authors have declared that no competing interests exist. The commercial affiliations do not alter our adherence to PLOS ONE policies on sharing data and materials.

Structural analysis of marble statues, carried out by non-invasive and in situ methods, is crucial to define the state of conservation of the artworks and to identify the deterioration phenomena that can affect them. In this work, we combined in situ non-destructive techniques, ultrasonic tomography (US), ultraviolet-induced visible fluorescence (UV-IF) and X-ray fluorescence (XRF) to study the bass-relief 'Madonna con Bambino' (Gorizia, Italy). The US revealed the presence of some metallic pivots, associated with areas of high sound velocity; moreover, a more degraded area has been identified in the lower part of the bass-relief. The acquired UV-IF image confirmed the presence of surface degradation, allowing a preliminary evaluation of the extension of a fracture, from surface to bulk. In addition, the different materials (both original and/or integrations) that compose the studied surface have been identified. The XRF has contributed to define the nature of the inorganic materials applied during undocumented previous restoration works on the surface as filler for lacunae.

This study examines the deterioration of geomaterials used throughout history that today may be found lying on the ocean floor. Submerged archaeological sites including cargoes from shipwrecks or ancient city ruins have been a topic of interest from a perspective of in situ musealization, as a way of making underwater cultural heritage accessible to the public. In an experimental study conducted at an underwater archaeological site in the Bay of Cádiz (SW Spain), we subjected two types of marble (Carrara and Macael) to three conditions to which submerged archaeological objects are often exposed: full exposure to the water column, natural processes of burial and unearthing, or permanent burial. After an 18-month study period, the factor found to mostly affect these materials was their biological colonization. This factor was assessed by estimating total surface biocover and the rate of surface biocolonization, and also through the identification of skeletons and associated alteration forms by light microscopy, and scanning electron microscopy (SEM). Biofouling and bioerosion were the main causes of biodeterioration and dependent on the position of the marble specimens in the seawater. The response of both materials was similar, though dolomite crystals in the Carrara marble acted as a protective barrier against actively penetrating microorganisms. These investigations have allowed the study of tracers left by epilithic encrusting organisms and endolithic bioeroders on marbles intentionally exposed to seawater, providing new insights to the understanding of the biodeterioration processes occurring in cultural heritage stones, with significant implications when they are part of underwater archaeological remains., (Copyright © 2017 Elsevier B.V. All rights reserved.)

This paper deals with the analysis of black crust coming from the statue of Oceanus belonging to the Fontana di Trevi (Rome). This monument is undoubtedly one of the main touristic attractions of Rome. During the restoration held between 2014 and 2015, some diagnostic analyses had been carried out. It has been highlighted that the sheltered surfaces suffer the formation of black crust, especially on the marble statues. The possibility to sample those degradation products, together with the unaltered substrate, represented an excellent opportunity to characterize the marble itself, to assess the impact of the urban air pollution on the stone material, and to detect the pollutant on a precise timescale. In fact, it is known that the previous restoration of the fountain had been carried out between 1989 and 1991 then, information about the air pollution over the last 25years can be highlighted, because it has been proved that black crusts act as passive samplers of pollution. In order to fully characterize those samples, several techniques were used, including optical and scanning electron microscopy, X-ray diffraction, laser ablation inductively coupled plasma mass spectrometry, infrared spectroscopy and ion chromatography. Furthermore, a new methodology based on CHN (Carbon, Hydrogen, Nitrogen) analysis has been developed for the quantification of the two main constituents of the carbonaceous fraction present in the black crusts, i.e. OC (organic carbon) and EC (elemental carbon). This integrated approach proposed in the present study allowed us to gain information about the mineralogical phases and the elements within the crusts and at the crust-substrate interface, giving the possibility to identify the pollution sources causing the stone decay within the monument., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In order to avoid both natural and artificial stone decay, mainly due to the interaction with atmospheric pollutants (both gases such as NOx and SO2 and particulate matter), polymeric materials have been widely studied as protective coatings enable to limit the penetration of fluids into the bulk material. In the current work, an air hardening calcic lime mortar (ALM) and a natural hydraulic lime mortar (HLM) were used as substrates, and commercially available Si-based resins (Alpha®SI30 and Silres®BS16) were adopted as protective agents to give hydrophobicity features to the artificial stones. Surface properties of coatings and their performance as hydrophobic agents were studied using different techniques such as contact angle measurements, capillary absorption test, mercury intrusion porosimetry, surface free energy, colorimetric measurements and water vapour permeability tests. Finally, some exposure tests to UV radiation and to real polluted atmospheric environments (a city centre and an urban background site) were carried out during a wintertime period (when the concentrations of the main atmospheric pollutants are higher) in order to study the durability of the coating systems applied. The effectiveness of the two commercial resins in reducing salt formation (sulphate and nitrate), induced by the interaction of the mortars with the atmospheric pollutants, was demonstrated in the case of the HLM mortar. Graphical Abstract ᅟ.

CRISPR-Cas9 technology has rapidly changed the landscape for how biologists and bioengineers study and manipulate the genome. Derived from the bacterial adaptive immune system, CRISPR-Cas9 has been coopted and repurposed for a variety of new functions, including the activation or repression of gene expression (termed CRISPRa or CRISPRi, respectively). This represents an exciting alternative to previously used repression or activation technologies such as RNA interference (RNAi) or the use of gene overexpression vectors. We have only just begun exploring the possibilities that CRISPR technology offers for gene regulation and the control of cell identity and behavior. In this review, we describe the recent advances of CRISPR-Cas9 technology for gene regulation and outline advantages and disadvantages of CRISPRa and CRISPRi (CRISPRa/i) relative to alternative technologies., (Copyright © 2015, American Society for Microbiology. All Rights Reserved.)

The Cathedral of Seville is one of the most important buildings in the whole of southern Spain. It suffers, like most of the historical buildings located in urban environments, from several degradation phenomena related to the high pollution level. Undoubtedly, the formation of black crusts plays a crucial role in the decay of the stone materials belonging to the church. Their formation occurs mainly on carbonate building materials, whose interaction with a sulfur oxide-enriched atmosphere leads to the transformation of calcium carbonate (calcite) into calcium sulfate dihydrate (gypsum) which, together with embedded carbonaceous particles, forms the black crusts on the stone surface. To better understand the composition and the formation dynamics of this degradation product and to identify the pollutant sources and evaluate their impact on the stone material, an analytical study was carried out on the black crust samples collected from different areas of the building. For a complete characterization of the black crusts, several techniques were used, including laser ablation inductively coupled plasma mass spectrometry, Fourier transform infrared spectroscopy, micro infrared spectroscopy, optical and scanning electron microscopy. This battery of tests provided information about the nature and distribution of the mineralogical phases and the elements within the crusts and the crust-substrate interface, contributing to the identification of the major pollution sources responsible for the deterioration of the monument over time. In addition, the results revealed a relation among the height of sampling, the surface exposure and the concentration of heavy metals. Finally, information has been provided about the origin of the concentration gradients of some metals., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Black crusts are recognized to have been, up to now, one of the major deterioration forms affecting the built heritage in urban areas. Their formation is demonstrated to occur mainly on carbonate building materials, whose interaction with an SO2-loaded atmosphere leads to the transformation of calcium carbonate (calcite) into calcium sulfate dihydrate (gypsum) which, together with embedded carbonaceous particles, consequently forms the black crusts on the stone surface. An analytical study was carried out on black crust samples collected from limestone monumental buildings and churches belonging to the European built Heritage, i.e., the Corner Palace in Venice (Italy), the Cathedral of St. Rombouts in Mechelen (Belgium), and the Church of St. Eustache in Paris (France). For a complete characterization of the black crusts, an approach integrating different and complementary techniques was used, including laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), Fourier transform infrared spectroscopy, optical and scanning electron microscopy. In particular, the application of LA-ICP-MS permitted to obtain a complete geochemical characterization in terms of trace elements of the black crusts from the inner parts to the external layers contributing to the identification of the major combustion sources responsible for the deterioration over time of the monuments under study. In addition, the obtained results revealed a relation between the height of sampling and the concentration of heavy metals and proved that the crust composition can be a marker to evaluate the variation of the fuels used over time.

Introduction: In this work, we propose an innovative application of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) as a methodological approach for the chemical characterisation of black crusts on stone monuments, associated with traditional micro-morphological (optical and scanning electron microscopy) and infrared spectroscopic techniques (FTIR)., Methods: This new approach was tested on black crusts developing on two marble substrates, one, the columns of the San Cosimato cloister in Rome, and the other, a sculpture representing an angel, located in Pessano con Bornago, a small industrial town near Milan., Discussion: The main aim of this study was to develop and test the reliability of the LA-ICP-MS analytical method on black crusts and to explore the idea that trace element concentrations in black crusts can be applied to investigate their origin and the relations between concentrations of polluting elements in black crusts and environmental conditions., Conclusion: The results obtained by applying traditional techniques find considerable support in the innovative method used here, which could determine the concentrations of a large number of trace elements (including heavy metals) in the black crusts examined, and thus could also be used as a reliable indicator of environmental pollution.