Search

Purpose. This study evaluated the effects of different dowel space (DS) diameters on pull-out bond strength of a cylindrical post, of threaded steel, to dentin. Materials and methods. Forty-five extracted human teeth were divided in 3 groups with DSs, with the same depth (6 mm), differing for the diameter (i.e. 1.5 mm, Group 1; 1.75 mm, Group 2; 2.00 mm, Group 3). Both the diameter of the post (1.3 mm) and the composite resin cement (Panavia 21) were the same for all the samples. The samples were submitted to pull-out test by means an Universal Testing Machine (Mod. 1193, Instron) (1KN load cell, crosshead speed 0.5 mm/min). Results. The mean values of the bond strength (BS) were: Group 1, 442±128.3N; Group 2, 411.3±111N; Group 3, 448.7±142.29N. While the calculated average shear bond strengths (SBSs) were: Group 1, 14.7±4.27MPa; Group 2, 11.6±3.14MPa; Group 3, 11±3.5MPa. ANOVA test showed not significative differences, among the groups, concerning the BS: Group 1 vs Group 2 (p = 0.490); Group 1 vs Group 3 (p = 0.894); Group 2 vs Group 3 (p = 0.431). Significative differences were observed, among the groups, concerning the SBS for Group 1 vs Group 2 (p = 0.032) and Group 1 vs Group 3 (p = 0.014). While a not significative difference was found, concerning this parameter, for Group 2 vs Group 3 (p = 0.641). Conclusion. The cement thickness can influence the SBS of the adhesively luted posts, in our setting, the best values were obtained with a thickness of 100 µm. [ABSTRACT FROM AUTHOR]

Objective: BUZZ is a workshop designed to enhance communication between patients and health care providers (HCPs) and results to date will be described. Background: A study of HIV patients interviewed about their treatment, identified several barriers to communication with their health care teams. Another study called BEAHIV, demonstrated low levels of agreement between patients and HCPs surrounding bothersome symptoms of ARV treatment. With a grant from Janssen, a workshop was designed by a faculty of HIV clinicians from across Canada, in conjunction with a behavioural specialist. The workshop covered several topics: identifying barriers to communication for HIV patients, learning about one's own preferred communication style, how to determine a patient's communication style, and ways to uncover issues associated with the patient's treatment, such as ARV‐associated side effects. To date, 15 workshops have been conducted across the country. Results: At the end of the workshop, 85% of participants said they would start or continue to identify barriers to communication. At the start of each workshop, several before/after questions were asked. Only 45% of HCPs felt comfortable in adapting their communication towards patients with different behavioural styles prior to participating in the workshop. This increased to 84% after the workshop. Prior to the workshop, 68% of HCPs said they currently engage patients in proactive discussions surrounding ARV‐associated side effects, increasing to 82% post‐workshop. Prior to the workshop, 60% proactively engaged patients on the impact of ARV side effects on quality of life, which increased to 80% post‐workshop. Several weeks after each workshop, a follow up with participants was conducted and it was found that many implemented changes in their practices as a result of what they learned. Conclusion: A workshop designed to enhance communication may have a beneficial effect on reducing communication barriers and enhancing HIV patient care., References Sequeira et al. Presented at the 6th Annual Canadian HIV/AIDS Skills Building Symposium, Montreal, Canada, 2010. Rachlis et al. Presented at the 19th Annual Canadian Conference on HIV Research, [...]

Purpose. The Authors analyzed the effect of spherical glass mega fillers (SGMF) on reducing contraction stress in dental composite resins, by means of a cavity model simulating the cuspal deflection which occurs on filled tooth cavity walls in clinical condition. Materials and methods. 20 stylized MOD cavities (C-factor = 0.83) were performed in acrylic resin. The inner surface of each cavity was sand blasted and adhesively treated in order to ensure a valid bond with the composite resin. Three different diameter of SGMF were used (i.e. 1, 1,5, 2 mm). The samples were divided in 4 groups of 5 each: Group 1 samples filled with the composite only; Group 2 samples filled with composite added with SGMFs, Ø1mm (16 spheres for each sample); Group 3 samples filled with composite added with SGMFs, Ø1,5 mm (5 spheres for each sample); Group 4 samples filled with composite added with SGMFs, Ø2 mm (2 spheres for each sample). Digital pictures were taken, in standardized settings, before and immediately after the polymerization of the composite material, placed into the cavities. With a digital image analysis software the distances from the coronal reference points of the cavity walls were measured. Then the difference between the first and second measurement was calculated. The data were analyzed by means of the ANOVA test. Results. A significative reduction on cavity walls deflection, when the composite resin is used in addiction with the SGMFs was observed. The SGMFs of smallest diameter (1mm) showed the better outcome. Conclusion. The SGMFs are reliable in reducing contraction stress in dental composite resins. [ABSTRACT FROM AUTHOR]

Purpose. Evaluate how the spherical glass mega fillers (SGMFs) can positively interfere with light diffusion when incorporated in a composite restoration. Materials and methods. 30 samples (Ss) were performed, applying 2 composite layers of 3 mm each: 6 were made with composite only; 6 with a layer of SGMFs of Ø1.5mm within the first layer of composite; 6 with 2 overlapping layers of SGMFs of Ø1.5mm; 6 with a layer of SGMFs of Ø2mm; 6 with 2 overlapping layers of SGMFs of Ø2mm. The curing time was set at 40s for the first layer, and 120s for the second layer, transilluminated through the first layer. Digital pictures were taken, in standardized settings, during the transillumination, and the light intensity was measured with a digital image analysis software. Results. From a lateral view the Ss with a single layer of SGMFs of Ø1.5mm and Ø2mm, the relative increments of light intensity, were of 24.37% and 33.33% respectively. Concerning the Ss made with 2 layers of SGMFs, the relative increments were of 67.99% and 66.4% respectively. In front view has emerged a relative increase rate of light intensity of 53.66% and 79.58%, in the Ss with a single layer of SGMFs of Ø1.5mm and of Ø2mm respectively. Furthermore, in the Ss with two layers of SGMFs of Ø1.5mm and Ø2mm the relative increments were of 267.53 and 319.63% respectively. Conclusion. The SGMFs are reliable in facilitating light diffusion within the light-curing composite resins. [ABSTRACT FROM AUTHOR]

Purpose. The aim of this paper was to evaluate the histological and histomorphometric outcome of Preformed Titanium Foil (PTF) to perform Guided Bone Regeneration (GBR) in posterior mandibular atrophies. Materials and methods. 10 subjects (1 male; 9 females; mean age 58±11.37 years), with distal mandibular atrophies were selected to perform GBR by means of PTF, using a moldable allograft paste as graft material. The devices, made of a 0,2 mm thick pure titanium foil, were pre-shaped using stereolithographic models obtained from CT-scan of the patients' recipient site. In the second stage, performed at 6.7±2.33 months, 18 cylindrical two-piece implants were placed and the devices removed, at the same time bone biopsies were harvested. At 4 months, the implants were exposed and submitted to progressive prosthetic load for a span of 4 months. The cases were finalized by means of metal-ceramic cementable restorations. The post finalization follow-up was at 12 months. Results. Survival rate (i.e. SVR) was 100% since none fixtures were lost. At the one-year follow up the clinical appearance of the soft tissues was optimal and not pathological signs on probing were recorded. The success rate (i.e. SCR) was 88.2% and the average peri-implant bone reabsorption was 1.17±0.41 mm. The average rate of graft contraction was 19.4±10.55%. The mean percentage occupied by mineralized bone was 48.03±5.93%, while the bone marrow and graft material were 36.1±2.81% and 15.87±4.87 %, respectively. Conclusion. The results suggest good potentialities of the method for GBR in distal mandibular atrophies, allowing to maximize the outcome and simplifying the surgical phase. [ABSTRACT FROM AUTHOR]

Purpose. In this article the Authors describe a procedure aimed to restore under endoscopic control, the continuity, of the Schneiderian membrane (SM) incidentally teared during a sinus lift with transcrestal approach. Materials e methods. In a 44-year-old male, due to aforementioned complication, the SM was gently detached via transcrestal approach, with a customized small ball burnisher, in order to facilitate the placement of a collagen sponge, to close the communication with the sinus, followed by the subsequent insertion of a graft material. All the procedure was endoscopically controlled and, considering the successful grafted area elevation, was simultaneously followed by implant placement. After 6 months the second stage was performed always under endoscopic control. Results. The endoscopic view of the grafted area showed a dome-shaped elevation sited on the top of the implant, the SM was apparently normal with no signs of inflammation, the antrum was empty and normally functioning. Periapical X-rays were performed: immediately after the surgery; at both 14 days and 6 months post-operative; at 6 months post prosthetic finalization. The volume of the grafted area progressively decreased over the time while its radiopacity, on the contrary, gradually increased, as expected after graft integration and remodelling. The implant was submitted to no functional load for 4 months by means of a temporary screwable acrylic crown inserted on a peek abutment and then finalized with a cementable metal-ceramic crown on a preformed titanium abutment. Conclusion. The Authors recommend the use of endoscope to repair the SM incidentally teared during transcrestal sinus lift. [ABSTRACT FROM AUTHOR]

Purpose. The aim of this article is to make a comparative assessment between the modification of the soft-tissue profile, around the healing cap screws (HCSs), following both the traditional flapless surgery (TFS) and a new modified flapless surgery, named Modified Connective Tissue Punch (MCTP) technique. Materials and methods. 8 patients (3M and 5F) (mean age 54.25±11.247years) were enrolled in this study. Sixteen twopiece implants were placed on upper jaws, 2 for each patient, 8 with TFS and 8 with MCTP technique. In each patient the implants were placed in edentulous areas, of 2 or 3 adjacent teeth long. MCTP technique was performed on the front implant site (FIS) while the TFS was performed on the rear implant site (RIS). All implants were inserted and covered with healing cap screws (HCSs). Alginate impressions were carried out at the moment of the surgery, at 1 month and 4 months post-operative. Plaster models were poured and subsequently digitally scanned, in order to measure the distance between the gingival outline and the free margin of the HCS. The recorded values were analyzed with the ANOVA test. Results. The use of MTCP technique, in comparison to TFS, showed a significative better outcome, in terms of vertical increments, of gingiva, on the VS toward the HCSs, during the entire observation period (p = 0.000 for all). Conclusion. The Authors recommend the use of MCTP technique for a better vestibular soft tissue outcome in flapless implant surgery. [ABSTRACT FROM AUTHOR]

Purpose. In the context of the transcrestal maxillary sinus lift a wide variety of biomaterials have been used to fill the subantral space over the years. In this study, two types of biomaterials were used in order to fill the maxillary sinus: a nanocrystallized hydroxyapatite in an aqueous solution and a micronized heterologous bone in a collagen matrix. Materials and methods. The surgical procedures were designed and carried out using computer-guided surgery. The filling volume obtained was measured with a comparative software program. Results. A ≥ 6 millimeter augmentation of osseous volume was obtained. This result is comparable to those obtained in lifts where conventional techniques were applied. The technique used was very precise and the difference between the projected and clinical outcome of the implant position had an average of less than 0.3 millimeters. Conclusions. This technique allows for the surgery to be performed in a way which is both minimally traumatic and invasive, and represents a viable alternative to those surgical techniques for crestal sinus lift currently in use. [ABSTRACT FROM AUTHOR]

Purpose. In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants, in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors present a case series of full-arch rehabilitations performed with this procedure named: Tilted Implant Expansion Osteotomy (TIEO). Materials and methods. 12 patients (5 males and 7 females, average age 58.5 ± 8.1 years) with totally or partially edentulous maxilla were enrolled in this study. For each patient 4 implants were placed, the anterior implants in the area of lateral incisors or canines while, the posterior implants, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 48 cylindrical two-piece implants were placed, 24 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 6 months, the second stage surgery was performed. The cases were finalized by means of a hybrid metal-acrylic prosthesis. The post finalization follow-up was at 12 months. Results. Survival rate was 100% since none fixtures were lost. At the one-year follow up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. Conclusion. TIEO is a promising surgical procedure for full-arch rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques. [ABSTRACT FROM AUTHOR]

Purpose. In this article the Authors show a safe and predictable technique to remove displaced implants from the maxillary sinus. Materials and methods. A 49-year-old female was referred, to this centre by a general dentist, for the retrieval of the ectopic dental implant. After a preliminary clinical and radiological evaluation of the case the surgical procedure was performed. A loco-regional anesthesia was carried out and then the Maxillary Sinus Retrieval Device (MSRD), proposed in this study, was inserted in the canine fossa, via a circular antrostomy 5,5mm wide, previous execution of a mucoperiosteal flap. The MSRD is a trocar, modified with a funnel-shaped cannula in order to allow the easy access of both an endoscope and a suction cannula or, in alternative, a straight forceps. The implant was easily found end retrieved thanks to the endoscopic control. The postoperative was uneventful and no nasal bleeding was reported by the patient. Conclusion. The Authors recommend the use of the MSRD in order to minimize the biological sacrifice consequent to the implant retrieval in the maxillary sinus. [ABSTRACT FROM AUTHOR]

The prevention of hospital-acquired pressure injuries (HAPIs) in children undergoing long-duration surgical procedures is of critical importance due to the potential for catastrophic sequelae of these generally preventable injuries for the child and their family. Long-duration surgical procedures in children have the potential to result in high rates of HAPI due to physiological factors and the difficulty or impossibility of repositioning these patients intraoperatively. We developed and implemented a multi-modal, multi-disciplinary translational HAPI prevention quality improvement program at a large European Paediatric University Teaching Hospital. The intervention comprised the establishment of wound prevention teams, modified HAPI risk assessment tools, specific education, and the use of prophylactic dressings and fluidized positioners during long-duration surgical procedures. As part of the evaluation of the effectiveness of the program in reducing intraoperative HAPI, we conducted a prospective cohort study of 200 children undergoing long-duration surgical procedures and compared their outcomes with a matched historical cohort of 200 children who had undergone similar surgery the previous year. The findings demonstrated a reduction in HAPI in the intervention cohort of 80% (p < 0.01) compared to the comparator group when controlling for age, pathology, comorbidity, and surgical duration. We believe that the findings demonstrate that it is possible to significantly decrease HAPI incidence in these highly vulnerable children by using an evidence-based, multi-modal, multidisciplinary HAPI prevention strategy., (© 2022 The Authors. International Wound Journal published by Medicalhelplines.com Inc (3M) and John Wiley & Sons Ltd.)

The use of minimally invasive surgical techniques undoubtedly represents a huge advantage for both the clinician and the patient. This case report shows the possibility of making an implant-prosthetic rehabilitation in an upper jaw in a patient who presented dental elements 1.3 and 2.3 in bone inclusion. The use of computer-guided surgery offers us the possibility to carry out this type of implant rehabilitation without performing the extraction of the above-mentioned dental elements combined with the bone regeneration of the extraction sockets. Consequently, surgery invasiveness and post-surgery complications are reduced to a minimum. Additionally, the predictability of the methodology is evaluated with specific software that enables a comparison between what is virtually planned and what occurs in clinical practice.

The aim of this study is to determine in an experimental way through mechanical tests the static, fatigue and torque resistance of two types of implant/abutment connectors with diameters of 3.4–5.2 mm.

Purpose: The Authors analyzed the effect of spherical glass mega fillers (SGMF) on reducing contraction stress in dental composite resins, by means of a cavity model simulating the cuspal deflection which occurs on filled tooth cavity walls in clinical condition., Materials and Methods: 20 stylized MOD cavities (C-factor = 0.83) were performed in acrylic resin. The inner surface of each cavity was sand blasted and adhesively treated in order to ensure a valid bond with the composite resin. Three different diameter of SGMF were used (i.e. 1, 1,5, 2 mm). The samples were divided in 4 groups of 5 each: Group 1 samples filled with the composite only; Group 2 samples filled with composite added with SGMFs, Ø1mm (16 spheres for each sample); Group 3 samples filled with composite added with SGMFs, Ø1,5 mm (5 spheres for each sample); Group 4 samples filled with composite added with SGMFs, Ø2 mm (2 spheres for each sample). Digital pictures were taken, in standardized settings, before and immediately after the polymerization of the composite material, placed into the cavities. With a digital image analysis software the distances from the coronal reference points of the cavity walls were measured. Then the difference between the first and second measurement was calculated. The data were analyzed by means of the ANOVA test., Results: A significative reduction on cavity walls deflection, when the composite resin is used in addiction with the SGMFs was observed. The SGMFs of smallest diameter (1mm) showed the better outcome., Conclusion: The SGMFs are reliable in reducing contraction stress in dental composite resins.

Purpose: Evaluate how the spherical glass mega fillers (SGMFs) can positively interfere with light diffusion when incorporated in a composite restoration., Materials and Methods: 30 samples (Ss) were performed, applying 2 composite layers of 3 mm each: 6 were made with composite only; 6 with a layer of SGMFs of O1.5mm within the first layer of composite; 6 with 2 overlapping layers of SGMFs of O1.5mm; 6 with a layer of SGMFs of O2mm; 6 with 2 overlapping layers of SGMFs of O2mm. The curing time was set at 40s for the first layer, and 120s for the second layer, transilluminated through the first layer. Digital pictures were taken, in standardized settings, during the transillumination, and the light intensity was measured with a digital image analysis software., Results: From a lateral view the Ss with a single layer of SGMFs of O1.5mm and O2mm, the relative increments of light intensity, were of 24.37% and 33.33% respectively. Concerning the Ss made with 2 layers of SGMFs, the relative increments were of 67.99% and 66.4% respectively. In front view has emerged a relative increase rate of light intensity of 53.66% and 79.58%, in the Ss with a single layer of SGMFs of O1.5mm and of O2mm respectively. Furthermore, in the Ss with two layers of SGMFs of O1.5mm and O2mm the relative increments were of 267.53 and 319.63% respectively., Conclusion: The SGMFs are reliable in facilitating light diffusion within the light-curing composite resins.

Purpose: The aim of this study was to evaluate the progression of the light through a series of translucent posts available on the market (D.T. Light-post, R.T.D.)., Materials & Methods: nine D.T. Light-posts (DTLPs) were analyzed, 3 for each available measure. Each post was trans-illuminated both in vertical trans-ilumination (VTI) and oblique trans-illumination (OTI), via a light curing unit (LCU) (V.I.P., Bisco), in complete darkness conditions, and the resulting image of the post, was digitally acquired with a 1:1 ratio. The images were then analyzed using digital image analysis software (Image Pro plus 4.1, Media Cybernetics) previously performing the light intensity calibration, of the LCU, by means a radiometer (Curing Radiometer model 100, Demetron Corp.). The evaluation of the progression of the light through the posts was conducted for each post along its longitudinal axis., Results: no significant differences concerning VTI vs OTI for DTLP n.1 (p = 0.341) and DTLP n. 3 (p = 0.115), while for DTLP n.2 a significant difference was observed (p = 0.041); Conclusion: The results demonstrate that the greater the section of the post, the greater its ability to transmit light at a distance; also the vertical Trans-illumination of the post is to be preferred to the oblique one.

Purpose: In this article the Authors describe a procedure aimed to restore under endoscopic control, the continuity, of the Schneiderian membrane (SM) incidentally teared during a sinus lift with transcrestal approach., Materials E Methods: In a 44-year-old male, due to aforementioned complication, the SM was gently detached via transcrestal approach, with a customized small ball burnisher, in order to facilitate the placement of a collagen sponge, to close the communication with the sinus, followed by the subsequent insertion of a graft material. All the procedure was endoscopically controlled and, considering the successful grafted area elevation, was simultaneously followed by implant placement. After 6 months the second stage was performed always under endoscopic control., Results: The endoscopic view of the grafted area showed a dome-shaped elevation sited on the top of the implant, the SM was apparently normal with no signs of inflammation, the antrum was empty and normally functioning. Periapical X-rays were performed: immediately after the surgery; at both 14 days and 6 months post-operative; at 6 months post prosthetic finalization. The volume of the grafted area progressively decreased over the time while its radiopacity, on the contrary, gradually increased, as expected after graft integration and remodelling. The implant was submitted to no functional load for 4 months by means of a temporary screwable acrylic crown inserted on a peek abutment and then finalized with a cementable metal-ceramic crown on a preformed titanium abutment., Conclusion: The Authors recommend the use of endoscope to repair the SM incidentally teared during transcrestal sinus lift.