Search

Generating and manipulating magnetic skyrmions at ultrafast time scales is essential for future skyrmion-based racetrack memory and logic gate applications. Using the atomistic spin dynamics simulations, we demonstrate the nucleation of ultra-small field-free magnetic skyrmions in amorphous GdFeCo at picosecond time scales by femtosecond laser heating. The ultrafast nature of laser heating and subsequent cooling from a high-temperature state is crucial for forming magnetic skyrmion. The magnon localization and magnon coalescence are the key driving mechanisms responsible for stabilizing the magnetic skyrmions at zero-field conditions. The polarization and, hence, the topological charge can be switched by exploiting the all-optical switching observed in GdFeCo. The skyrmion sizes and numbers can be controlled by varying pulse width and fluence of incident laser pulses. Applying an external magnetic field provides an additional degree of freedom to tune the skyrmion radius during the ultrafast optical creation of magnetic skyrmions. Our results provide a detailed understanding of the ultrafast creation of magnetic skyrmions using femtosecond laser pulses, a vital step in advancing next-generation skyrmion-based memory technologies. [ABSTRACT FROM AUTHOR]

The development of various nanomaterials production technologies has led to the possibility of producing nanoparticles (NPs) and nanostructures, which can find a wide range of applications, from the fabrication of microelectronic devices to the improvement of material properties and the treatment of cancer. The unique characteristics of nanoparticles are primarily due to their small size, which makes size control important in their preparation. Modification of nanoparticles by laser irradiation and obtaining desired nanoparticle properties is a promising approach because of its ease of implementation. The purpose of this review is to analyze the works devoted to the study of laser-induced heating and melting of nanoparticles, to collect information and evaluate the results of using this method for functionalization and modification of metallic nanoparticles, and to discuss promising directions for the use of this technique. [ABSTRACT FROM AUTHOR]

This study investigates the spheroidization of titanium Ti-6Al-4V powder particles using numerical models developed in Abaqus and OpenFOAM. Spherical particles are crucial in powder-based additive manufacturing due to their superior flowability, packing density, and mechanical properties, enhancing printing precision and the quality of final products. While conventional techniques such as gas atomization and plasma spheroidization have been extensively researched, the potential of laser spheroidization remains underexplored. To address this gap, detailed numerical analyses of laser spheroidization were conducted, modeling heat transfer from the laser to powder particles using a transient uncoupled heat transfer method with latent heat considerations, while particle deformation was simulated with a phase-fraction-based interface-capturing approach integrated with Navier-Stokes equations. The results, validated against analytical models, indicate that particles within the 20–80 μm range experience optimal spheroidization within a 0.005-second residence time under laser heating, with particles smaller than 30 μm reaching evaporation temperatures of 5,000°C, while larger particles reshape without evaporating under a typical heat flux of 94 MW/m2 (1.8 kW laser power). This study demonstrates that laser spheroidization of Ti-6Al-4V powder can potentially increase powder yield by 10%, offering higher power density and shorter melting times compared to plasma spheroidization, thus presenting a more efficient alternative for achieving spherical particles of specific sizes. [ABSTRACT FROM AUTHOR]

Laser-assisted turning (LAT) involves locally heating a rotating workpiece using a focused laser beam before the removal of material. A key aspect in optimising productivity with laser-assisted turning is understanding the thermal relationship between laser heating, the improved material removal rate, and machinability. Consequently, in this paper, a thermal heating and laser-assisted turning finite element model and experiments were conducted to assess the machinability of an Al/SiC p MMC workpiece, considering the circumferential location of the laser beam from the cutting point. The results confirm that laser power and cutting velocity influence the temperature profile from the laser spot to the tool point and the heat-affected depth. Positioning the cutting tool closer to the laser spot effectively reduces the Von Mises stress during cutting at higher cutting temperatures. At the same time, the experiment indicates an increased risk of directly heating the tool, which can affect the integrity of the cutting tool. The work further reveals that at specified cutting velocities, lower specific cutting energy improves the tool condition and surface quality of the machined parts. Based on a range of material removal rates and laser-specific energy density, a new criterion for optimal laser-tool circumferential distance was determined. Establishing this distance can act as a guide for the laser-assisted turning of Al/SiC p metal matrix composites and potentially other materials. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is the formation and growth of nanoscale intermetallic compounds (IMCs) when laser is used as a heat source to form solder joints. Design/methodology/approach: This study investigates the Sn/Cu and Sn-0.1AlN/Cu structure using laser soldering under different laser power: (200, 225 and 250 W) and heating time: (2, 3 and 4 s). Findings: The results show clearly that the formation of nano-Cu6Sn5 films is feasible in the laser heating (200 W and 2 s) with Sn/Cu and Sn-0.1AlN/Cu system. The nano-Cu6Sn5 films with thickness of 500 nm and grains with 700 nm are generally parallel to the Cu surface with Sn-0.1AlN. Both IMC films thickness of Sn/Cu and Sn-0.1AlN/Cu solder joints gradually increased from 524.2 to 2025.8 nm as the laser heating time and the laser power extended. Nevertheless, doping AlN nanoparticles can slow down the growth rate of Cu6Sn5 films in Sn solder joints due to its adsorption. Originality/value: The formation of nano-Cu6Sn5 films using laser heating can provide a new method for nanofilm development to realize the metallurgical interconnection in electronic packaging. [ABSTRACT FROM AUTHOR]

The fabrication of high‐performance microbial fuel cells requires the evaluation of the activity of electrochemically active bacteria. However, this is challenging because of the time‐consuming nature of biofilm formation and the invasive nature of labeling. To address this issue, we developed a fast, label‐free, single‐cell Raman spectroscopic method. This method involves investigating the “pure” linear Stark effect of endogenous CO in the silent region of biological samples, which allows for probing the intrinsic electric field in the outer‐membrane cytochromes of live bacterial cells. We found that reduced outer‐membrane cytochromes can generate an additional intrinsic electric field equivalent to an applied potential of +0.29 V. We also found that the higher the electrical activity of the cell, the larger the generated electric field. This was also reflected in the output current of the constructed microbial fuel cells. Raman spectroscopy was employed to facilitate the assessment of electrochemical activity at the single‐cell level in highly‐diluted bacterial samples. After analysis, inactive bacteria were ablated by laser heating, and 20 active cells were cultured for further testing. The rapid and high‐throughput probing of the intrinsic electric field offers a promising platform for high‐efficiency screening of electrochemically active bacterial cells for bioenergetic and photosynthetic research. [ABSTRACT FROM AUTHOR]

Smooth metal microspheres with uniform sizes are ideal for constructing particle-arrayed anisotropic conductive films (ACF), but synthesis is hindered by challenges in controlling anisotropic metal growth. Here, we present a positioned transient-emulsion self-assembly and laser-irradiation strategy to fabricate pure gold microsphere arrays with smooth surfaces and uniform sizes. The fabrication involves assembling gold nanoparticles into uniform colloidosomes within a pre-designed microhole array, followed by rapid transformation into well-defined microspheres through laser heating. The gold nanoparticles melt and merge in a layer-by-layer manner due to the finite skin depth of the laser, leading to a localized photothermal effect. This strategy circumvents anisotropic growth, enables tunable control of microsphere size and positioning, and is compatible with conventional lithography. Importantly, these pure gold microspheres exhibit stable conductivity under deep compression, offering promising applications in soldering micro-sized chips onto integrated circuits. The authors present a simple and rapid way for fabricating gold microsphere arrays through a laser-irradiated ripening strategy. These gold microspheres are suitable for reliable high-resolution bonding applications due to their stable conductivity. [ABSTRACT FROM AUTHOR]

Recent progress has seen multiple Ta2O5 polymorphs generated by different synthesis techniques. However, discrepancies arise when these polymorphs are produced in widely varying thermodynamic conditions and characterized using different techniques. This work aimed to characterize and compare Ta2O5 particles formed at high and low temperatures using nanosecond pulsed laser ablation (PLA) and continuous wave (CW) laser heating of a local area of tantalum in either air or an 18O2 atmosphere. Scanning electron microscopy (SEM) and Raman spectroscopy of the micrometer-sized particles generated by PLA were consistent with either a localized amorphous Ta2O5 phase or a similar, but not identical, crystalline β-Ta2O5 phase. The Raman spectrum of the material formed at the point of CW laser impingement was in good agreement with the previously established ceramic "H-Ta2O5" phase. TEM and electron diffraction analysis of these particles indicated the phase structure matched an oxygen-vacated superstructure of monoclinic H-Ta2O5. Further from the point of laser impingement, CW heating produced particles with a Raman spectrum that matched β-Ta2O5. We confirmed that the high-temperature ceramic phase characterized in previous work by Raman spectroscopy was the same monoclinic phase characterized in different work by TEM and could be produced by direct laser heating of metal in air. [ABSTRACT FROM AUTHOR]

"MightyLev," a new multi-emitter ultrasonic acoustic levitation device capable of extremely stable levitation of materials of density up to at least 11.3 g cm−3, is described. The exceptional stability of medium- to high-density samples levitated in MightyLev makes the device highly suitable for chemical and structural analysis using micro-focused spectroscopic and x-ray scattering techniques. In combination with mid-infrared laser heating, MightyLev is capable of levitating metallic and oxide materials during high-temperature cycling and melting above 1500 K. Instabilities in particle confinement during heating were investigated by directly visualizing the acoustic field using schlieren imaging. The results reveal jets of hot-air directed along the anti-nodes of the acoustic field. The reaction force on the sample from the jet, coupled with the restoring force of the acoustic trap, generates a parametric lateral oscillation of the sample. This result provides valuable insight for future optimization and wider application of acoustic levitation for high-temperature containerless material processing. [ABSTRACT FROM AUTHOR]

This study explores the modeling, design, simulation, and testing of a new composite material designed for high-strength and high-temperature resistance in in-space optical mining, examining its properties at both the polymer and atomic/molecular levels. At the polymer level, the investigation includes mechanical and thermal performance analyses using COMSOL Multiphysics 6.1, employing layerwise theory, equivalent single layer (ESL) theory, and a multiple-model approach for mechanical modeling, alongside virtual thermal experiments simulating laser heating. Experimentally, porous Polyaniline (PANI) films are fabricated via electrochemical polymerization, with variations in voltage and deposition time, to study their morphology, optical performance, and electrochemical behavior. At the atomic and molecular levels, this study involves modeling the composite material, composed of Nomex, Kevlar, and Spirooxazine-Doped PANI, and simulating its behavior. The significance of this work lies in developing a novel composite material for in-space optical mining, integrating it into optical mining systems, and introducing innovative thermal management solutions, which contribute to future space exploration by improving resource efficiency and sustainability, while also enhancing the understanding of PANI film properties for in-space applications. [ABSTRACT FROM AUTHOR]

Ultrafast manipulation of the Néel vector in metallic antiferromagnets most commonly occurs by generation of spin-orbit (SOT) or spin-transfer (STT) torques. Here, we predict another possibility for antiferromagnetic domain switching by using novel laser optical torques (LOTs). We present results of atomistic spin dynamics simulations from the application of LOTs for all-optical switching of the Néel vector in the antiferromagnet Mn2Au. The driving mechanism takes advantage of the sizeable exchange enhancement, characteristic of antiferromagnetic dynamics, allowing for picosecond 90 and 180-degree precessional toggle switching of the Néel vector with laser fluences on the order of mJ/cm2. A special symmetry of these novel torques greatly minimises the over-shooting effect common to precessional spin switching by SOT and STT methods. We demonstrate the opportunity for LOTs to produce deterministic, non-toggle switching of single antiferromagnetic domains. Lastly, we show that even with sizeable ultrafast heating by laser in metallic systems, there exist a large interval of laser parameters where the LOT-assisted toggle and preferential switchings in magnetic grains have probabilities close to one. The proposed protocol could be used on its own for all-optical control of antiferromagnets for computing or memory storage, or in combination with other switching methods to lower energy barriers and/or to prevent over-shooting of the Néel vector. [ABSTRACT FROM AUTHOR]

Currently, there is limited research on the in situ forming process of thermoplastic prepreg tape winding, and the unclear impact of process parameters on mechanical properties during manufacturing is becoming increasingly prominent. The study aimed to investigate the influence of process parameters on the mechanical properties of thermoplastic composite materials (CFRP) using laser-assisted CF/PPS winding forming technology. The melting point and decomposition temperature of CF/PPS materials were determined using DSC and TGA instruments, and based on the operating parameters of the laser-assisted winding equipment, the process parameter range for this fabrication technology was designed. A numerical model for the temperature of laser-heated CF/PPS prepreg was established, and based on the filament winding process setup, the heating temperature and tensile strength were simulated and tested. The effects of process parameters on the heating temperature of the prepreg and the tensile strength of NOL rings were then analyzed. The non-dominated sorting genetic algorithm (NSGA-II) was employed to globally optimize the process parameters, aiming to maximize winding rate and tensile strength. The results indicated that core mold temperature, winding rate, laser power, and their interactions significantly affected mechanical properties. The optimal settings were 90 °C, 418.6 mm/s, and 525 W, achieving a maximum tensile strength of 2571.51 MPa. This study provides valuable insights into enhancing the forming efficiency of CF/PPS-reinforced high-performance engineering thermoplastic composites. [ABSTRACT FROM AUTHOR]

Despite recent advancements, artificial muscles have not yet been able to strike the right balance between exceptional mechanical properties and dexterous actuation abilities that are found in biological systems. Here, we present an artificial magnetic muscle that exhibits multiple remarkable mechanical properties and demonstrates comprehensive actuating performance, surpassing those of biological muscles. This artificial muscle utilizes a composite configuration, integrating a phase-change polymer and ferromagnetic particles, enabling active control over mechanical properties and complex actuating motions through remote laser heating and magnetic field manipulation. Consequently, the magnetic composite muscle can dynamically adjust its stiffness as needed, achieving a switching ratio exceeding 2.7 × 10³. This remarkable adaptability facilitates substantial load-bearing capacity, with specific load capacities of up to 1000 and 3690 for tensile and compressive stresses, respectively. Moreover, it demonstrates reversible extension, contraction, bending, and twisting, with stretchability exceeding 800%. We leverage these distinctive attributes to showcase the versatility of this composite muscle as a soft continuum robotic manipulator. It adeptly executes various programmable responses and performs complex tasks while minimizing mechanical vibrations. Furthermore, we demonstrate that this composite muscle excels across multiple mechanical and actuation aspects compared to existing actuators. Artificial muscles often struggle to match the performance of biological systems. Here, the authors report an artificial magnetic muscle that shows remarkable mechanical and actuating capabilities, comparable to natural muscles. [ABSTRACT FROM AUTHOR]

The temperature coefficient of resistivity (θ T) of carbon-based materials is a critical property that directly determines their electrical response upon thermal impulses. It could have metal- (positive) or semiconductor-like (negative) behavior, depending on the combined temperature dependence of electron density and electron scattering. Its distribution in space is very difficult to measure and is rarely studied. Here, for the first time, we report that carbon-based micro/nanoscale structures have a strong non-uniform spatial distribution of θ T. This distribution is probed by measuring the transient electro-thermal response of the material under extremely localized step laser heating and scanning, which magnifies the local θ T effect in the measured transient voltage evolution. For carbon microfibers (CMFs), after electrical current annealing, θ T varies from negative to positive from the sample end to the center with a magnitude change of >130% over <1 mm. This θ T sign change is confirmed by directly testing smaller segments from different regions of an annealed CMF. For micro-thick carbon nanotube bundles, θ T is found to have a relative change of >125% within a length of ∼2 mm, uncovering strong metallic to semiconductive behavior change in space. Our θ T scanning technique can be readily extended to nm-thick samples with μm scanning resolution to explore the distribution of θ T and provide a deep insight into the local electron conduction. [ABSTRACT FROM AUTHOR]

Fused filament fabrication (FFF) has become the preferred method for 3D printing of thermoplastic polymer parts due to its cost-effectiveness in comparison with powder- or resin-based 3D printing methods in both machines and materials. It also holds the potential to replace injection molding for small batch production, due to significantly reduced tooling costs, lead time, and the ability to create complex structures. However, the mechanical strength of polymer parts fabricated using this method is significantly lower than those produced using injection molding; this issue is worse in printed polymer composites due to undesirable rheological behaviors of infills during the filament extrusion process. This study investigates the use of an in-process orbiting laser pre-deposition heating technique aimed to enhance the mechanical strength of carbon fiber–reinforced filament in FFF. In this work, the mechanical strength, strain, and fracture behavior are investigated. This innovative technology increases tensile strength from 17.4 to 34.9 MPa at 0.45 W laser power and increases strain from 0.028 to 0.084. Moreover, the laser-treated samples exhibit marked differences in fracture surface characteristics when compared to control samples. The adoption of this approach can provide a solution to the main barrier to the adoption of FFF 3D for engineering and industrial applications. [ABSTRACT FROM AUTHOR]

The continuous development and application of laser technology, and the increasing energy and power of laser output have promoted the development of various types of laser optical systems. The optical components based on quartz materials are key components of high-power laser systems, and their quality directly affects the load capacity of the system. Due to the photothermal effect when the laser interacts with the quartz material and generates extremely high temperatures in a short period of time, it is impossible to experimentally solve the phenomena and physical mechanisms under extreme conditions. Therefore, it is very important to select a suitable method to investigate the thermal effect of intense laser interaction with quartz materials and explain the related physical mechanism. In this study, a three-dimensional quarter-symmetric laser heating quartz material geometry model by using nonlinear transient finite element method was established, and its transient temperature field distribution of the quartz material after being heated by a 1,064 nm continuous laser was investigated. In addition, the influence of different laser parameters (laser spot radius, heat flux and irradiation time), material parameters (material thickness, material absorption rate of laser) on the thermal effect of heating quartz material were also studied. When the laser heat flux is 20 W/cm2, the diameter of the laser spot is 10 cm, the irradiation time is 600 s and the thickness is 4 cm, the temperature after laser heating can reach 940.18°C, which is far lower than the melting point. In addition, the temperature maximum probes were set at the overall model, spot edge and rear surface respectively, and their temperature rise curves with time were obtained. It is also found that there is a significant hysteresis period for the rear surface temperature change of the quartz material compared with the overall temperature change due to heat conduction. Finally, the method proposed can also be applied to the laser heating of other non-transparent materials. [ABSTRACT FROM AUTHOR]

The present study assumes that the material properties of the fin vary by a force rule in the axial direction, with the exception of the thermal relaxation coefficient, which is assumed to be constant. The temperature distribution in the longitudinal fin with homogeneous cross-section exposed to the laser heat source is numerically investigated. This is because these constraints lead to a linear differential equation with partial solutions that cannot be analytically resolved using conventional methods, except for a few elementary order functions. Consequently, a linear or nonlinear system of equations as a function of time is obtained by transforming a differential equation attained with one or more independent factors using the highly efficient, potent, and practical semianalytical method known as the Chebyshev pseudospectral method. Temperature distributions in the fin are then examined in terms of different homogeneity factors and timevarying heat source capacity. Furthermore, the numerical solutions’ convergence is emphasised, and the results are confirmed using homogeneous solutions from the literature. [ABSTRACT FROM AUTHOR]

The thermo-mechanical coupled behavior of biological tissues excited by a transient heating has been studied in this paper, in which the temperature-dependent physical properties are considered. A non-linear bio-thermo-mechanical coupled model with variable physical parameters has been proposed firstly in the context of the generalized theory with the dual-phase relaxation mechanism. An effective procedure constructed on an explicit finite difference scheme is then implemented to solve this non-linear model numerically. On this basis the thermo-mechanical coupled response and relative thermal damage within a skin tissue irradiated by a pulse laser has been explored. The temporal and spatial distributions of each physical field resulting from various cases have been obtained and illustrated. The results stated that the thermo-mechanical interaction induced by a laser heating would be inhibited by temperature-dependent physical parameters and this inhibition is more significant on the tissue displacement and normal stresses than tissue temperature. The thermal damage is also inhibited when the temperature dependence is considered and the time that healthy tissues can be tolerated would be a larger extension for its accumulative effect with tissue temperature. [ABSTRACT FROM AUTHOR]

This work reveals the rules of using figures of merit on selecting efficient plasmonic nanoheaters. Here, a size dependence of plasmonic nanoparticle optical heating was disclosed. The continuous laser heating of gold nanospheres is evaluated exploring a theoretical approach and thermal lens spectroscopy, which allowed identifying micro-degree temperature changes of laser heated colloidal gold nanospheres of varying sizes. Our findings indicate that the temperature of photoheating colloidal particles rises according to the Joule number values. The optimal gold nanospheres diameter for efficient colloidal laser heating was identified to be 50 nm. Moreover, we demonstrated that long-time domain measurements of colloidal sample enable the identification of single-particle intermediate steady-state temperature. Considering a single particle, nanospheres with diameter larger than 80 nm exhibit superior heating performance than smaller particles, revealing that the optimal particle size for single-particle optical heating applications is different from the optimal particle size for collective heating of nanoparticles. Our results pave the way for the rational use of plasmonic nanoheaters in photothermal applications. [ABSTRACT FROM AUTHOR]

This study employs neutron diffraction to investigate the relationship between residual stress and coating thickness in cold sprayed 304L austenitic stainless steel. Results show that shot peening predominantly impacts the residual stress profile, leading to substantial in-plane compressive force. The impact of laser heating, a widely used method to alter cold spray's microstructural properties, on the coating's residual stress is also analyzed. The findings indicate that the maximum compressive residual stress in the in-plane component is mainly independent of coating thickness, which suggests that the material properties determine the maximum residual stress. The cold sprayed deposits possessed compressive, nearly biaxial strain and stresses. After laser heating, these stresses were replaced by tensile residual stresses. Two analytical models, the Tsui and Clyne and the Boruah models, for predicting residual stresses are also evaluated, and both models provide reasonable fits to the experimental data. At this point, the deviations between the experimental results and the models are principally caused by the inability of the current models to address plastic deformation and relaxation, and the residual stresses generated by thermal gradients. [ABSTRACT FROM AUTHOR]

Laser therapy has been widely used to treat port-wine stains (PWS) and other cutaneous vascular lesions via selective photothermolysis. Animal models are a valuable tool for investigating thermal responses beneath the skin. However, in previous animal experiments, such as the dorsal skin chamber model, one side of the skin was removed, resulting in the loss of mechanical support for the target blood vessel. In this study, the optical clearing technique was applied to the dorsal skin, allowing direct observation of real thermal responses within the tissue without removing the covering skin. The target blood vessels were irradiated with a pulsed 1064 nm Nd: YAG laser. The corresponding thermal responses were recorded using a CCD camera. Additionally, variations in skin reflectance spectra were measured before and after laser irradiation. Due to the optical clearing and reflectance spectra measurement, vessel responses such as contraction, reperfusion, and full occlusion were correlated with specific variation patterns in reflectance spectral signals. [ABSTRACT FROM AUTHOR]

Hyperdoped germanium (Ge) has demonstrated increased sub-bandgap absorption, offering potential applications in the short-wavelength-infrared spectrum (1.0–3.0 μm). This study employs ion implantation to introduce a high concentration of selenium (Se) into Ge and investigates the effects of post-implantation annealing techniques on the recovery of implantation damage and alterations in optical properties. We identify optimal conditions for two distinct annealing techniques: rapid thermal annealing (RTA) at a temperature of 650 °C and ultrafast laser heating (ULH) at a fluence of 6 mJ/cm2. The optimized ULH process outperforms the RTA method in preserving high doping profiles and achieving a fourfold increase in sub-bandgap absorption. However, RTA leads to regrowth of single crystalline Ge, while ULH most likely leads to polycrystalline Ge. The study offers valuable insights into the hyperdoping processes in Ge for the development of advanced optoelectronic devices. [ABSTRACT FROM AUTHOR]

The article presents the estimation of temperature and emissivities of niobium and 100c6 steel around their melting points using techniques based on the minimization of the least squares norm or on Bayesian inference. Two models were considered for the spectral emissivity, including a linear variation with respect to the wavelength and independent spectral values. The measured data used for the solution of the parameter estimation problem were radiative fluxes collected from a five-wavelength pyrometer. The experimental apparatus used in this work was designed for the characterization of metal samples with sizes of few millimeters at high temperatures, combining aerodynamic levitation and laser heating. The use of the linear spectral emissivity model provided quite consistent results with the ordinary least squares estimator and with stochastic simulations using the Metropolis-Hastings algorithm. Similarly, the model of independent spectral emissivities resulted in accurate emissivities, but it required an informative prior for temperature, such as the known melting point of the metal sample. Therefore, whatever the inverse method used, a priori supplementary information in terms of emissivities or temperatures are needed due to the temperature-emissivity correlation and the unknow emissivity behavior. [ABSTRACT FROM AUTHOR]

Single-crystal germanium, as an excellent infrared optical material, has been widely applied in X-ray monochromators, night vision systems, and gamma radiation detectors. However, how to obtain high-quality optical lenses on their surfaces still faces challenges due to their hard and brittle properties. To this end, this paper proposes the in situ laser-assisted diamond turning (ILADT) process, which is the combination of a laser heating technique and a single-point diamond turning process. The in situ laser heating technique is employed to enhance the surface quality of the workpiece material, while the single-point diamond turning process is utilized to fabricate optical lenses. Experimental results showed that optical lenses with high surface quality were successfully machined. The profile error is 0.135 μm, indicating the high machining accuracy. The surface roughness Sa of the aspheric lens is 0.909 nm, indicating the high machining quality achieved by the proposed ILADT process. Therefore, this study provides an effective approach for producing high-quality optical lenses on single-crystal germanium surfaces, which holds great promise for future applications in the manufacturing of optical lenses with exceptional quality. [ABSTRACT FROM AUTHOR]

According to experiments, the initial martensitic structure with inherent carbon content is most suitable for high-speed laser hardening during preliminary volumetric heat treatment, releasing a suitable amount and dispersion of carbides during tempering. When choosing a volumetric heat treatment mode, it is necessary to consider that the α→γ transformation during laser heating occurs via a shear mechanism with the hereditary transfer of carbon atoms and alloying elements, as well as defects in the crystal structure, to austenite from the original martensite. High-temperature laser-hardened austenite has a fragmented structure with subgrains 200–300 nm in size. This feature is due to the dynamic polygonization of austenite, which occurs because of the superposition of dynamic thermostrictive effects in the laser processing zones on phase hardening during the α→γ transition. After high-speed cooling, the irradiated zones contain hereditary fine-needle martensite with high-strength properties, a certain amount of textured residual austenite, and a carbide phase. It has been established that the strengthening of irradiated steel, which occurs under conditions of thermal deformation of laser radiation, is associated, among other things, with the formation of nanosized zones at the carbide steel matrix composition interface, which have a dispersed structure and increased hardness (10–12 GPa). Metallophysical and urometric studies showed that the maximum hardness of laser-hardened steels is achieved if dispersed carbides occupy more than 40% of the irradiated area and have dimensions of 0.5–1.5 μm. A reasonable choice of the initial steel structure and laser processing mode enabled obtaining a structural state of surface layers on the working surfaces of products having high and predictable performance properties. [ABSTRACT FROM AUTHOR]

The thermal conductivity of bridgmanite, the primary constituent of the Earth's lower mantle, has been investigated using diamond anvil cells at pressures up to 85 GPa and temperatures up to 3,100 K. We report the results of time‐domain optical laser flash heating and X‐ray Free Electron Laser heating experiments from a variety of bridgmanite samples with different Al and Fe contents. The results demonstrate that Fe or Fe,Al incorporation in bridgmanite reduces thermal conductivity by about 50% in comparison to end‐member MgSiO3 at the pressure‐temperature conditions of Earth's lower mantle. The effect of temperature on the thermal conductivity at 28–60 GPa is moderate, well described as k=k300(300/T)a ${k={k}_{300}(300/T)}^{a}$, where a is 0.2–0.5. The results yield thermal conductivity of 7.5–15 W/(m × K) in the thermal boundary layer of the lowermost mantle composed of Fe,Al‐bearing bridgmanite. Plain Language Summary: Heat transport from the Earth's core and mantle to the surface drives plate tectonics and is crucial for sustaining the magnetic field which shields the surface from the solar wind. To quantify the heat transport process across the core‐mantle boundary layer, it is important to know thermal conductivity of major constituent minerals of the lower mantle in the region. Bridgmanite, which was called silicate perovskite, is the most abundant mineral in the lower mantle. Here we measured thermal conductivity on lab‐grown bridgmanite with different Fe and Al compositions compressed at the tips of two opposing diamonds to reproduce relevant pressures in the mantle. To obtain thermal conductivity, we applied optical and X‐ray Free Electron Lasers combined with optical spectroscopy and X‐ray diffraction to heat and measure time‐dependent temperature distributions of the sample. Our study provides relevant high pressure‐temperature data sets to better constrain the heat flux across the core‐mantle boundary. Key Points: We measured thermal conductivity of Fe,Al‐bearing bridgmanite, the most abundant mineral in the Earth's lower mantle, up to 85 GPa and 3,100 KFinite‐element calculations to temperatures obtained from laser flash and X‐ray Free Electron Laser heating measurements are fitted to evaluate temperature effect on conductivityWe assessed pressure, temperature, composition effects on thermal conductivity of bridgmanite at the thermal boundary layer of the lowermost mantle [ABSTRACT FROM AUTHOR]

Laser irradiation can induce local modulations of functional material properties, such as a decreased resistivity or a variation in reflectance. Recent studies investigated the laser-induced phase separation of 4 H-SiC into carbon and silicon on top of regrown SiC to customize its electrical conductivity for the application in electronic devices. To understand the physical processes leading to the laser-induced phase separation, time-resolved pump-probe measurements represent a suitable tool. This study advances the state of the art by characterizing the transient reflectance changes in 4 H-SiC upon irradiation by spatially resolved pump-probe reflectometry. Since the laser heating alters the reflectance of the sample, the spatially resolved measurement enables to observe the heat conduction from the irradiated to the non-irradiated areas, which sustains for several milliseconds. Numerical simulations of the temperature evolution reveal a restricted one-dimensional heat conduction into depth due to the broad lateral extent of the irradiated area. The associated sustained increased temperature within the irradiated area most certainly abets the feasibility of the phase separation. These findings offer practical insights for optimizing the applied laser parameters to tailor the material properties via phase separation. [ABSTRACT FROM AUTHOR]

Nanometre- to micrometre-sized solid dust particles play a vital role in star and planet formations. Despite of their importance, however, our understanding of physical and chemical properties of dust particles is still provisional. We have conducted a condensation experiment of the vapour generated from a solid starting material having nearly cosmic proportions in elements. A laser flash heating and subsequent cooling has produced a diverse type of nanoparticles simultaneously. Here we introduce four types of nanoparticles as potential dust particles in space: amorphous silicate nanoparticles (type S); core/mantle nanoparticles with iron or hydrogenized iron core and amorphous silicate mantle (type IS); silicon oxycarbide nanoparticles and hydrogenized silicon oxycarbide nanoparticles (type SiOC); and carbon nanoparticles (type C), all produced in a single heating–cooling event. Type IS and SiOC nanoparticles are new for potential astrophysical dust. The nanoparticles are aggregated to a wide variety of structures: compact, fluffy, and networked. A simultaneous formation of these nanoparticles, which are diverse in chemistry, shape, and structure, prompts a re-evaluation of astrophysical dust particles. [ABSTRACT FROM AUTHOR]

Multilayer core–shell microparticles with a liquid core and a polycomposite light-absorbing shell (microcapsules) are important components of modern bio- and medical technologies. Opening of the microcapsule shell and payload release can be realized by optical radiation. The photophoretic force is due to the radiation-stimulated thermal gradient and arises from the temperature inhomogeneity of the microparticle. Photophoretic forces, as well as radiation pressure forces, are inherently mechanical forces and can cause microcapsules to move during the opening cycle. We numerically simulate the microcapsule photophoretic motion when illuminated by an intense laser pulse. Numerical calculations of the temperature field in a spherical microcapsule are carried out using the finite element method, taking into account the auxiliary nanoparticles, which are randomly distributed around the capsule and serve to enhance the heating of the capsule under short pulse exposure. The spatial distribution of the absorbed optical power as well as the temporal dynamics of microcapsule heating depending of its size are investigated in detail. We show, for the first time to our knowledge, that under the joint action of light pressure and photophoretic forces, the microcapsule can move along the laser incidence direction both forward and backward at the distance of several tens of nanometers depending on the particle size and conditions of optical absorption. [ABSTRACT FROM AUTHOR]

A reliable initiation of oblique detonation is critical in oblique detonation engines, especially for oblique detonation engines under extreme conditions such as a high altitude and low Mach number, which may lead to excessive length of the induction zone and even the phenomenon of extinction. In this paper, surface ignition was applied to the initiation of oblique detonation, and a high-temperature region was set on the wedge to simulate the presence of a hot-spot induced by the laser heating. The two-dimensional multi-component Navier–Stokes equations considering a detailed H2 combustion mechanism are solved, and the oblique detonation wave accelerated by a hot-spot is studied. In this paper, hot-spots in the induction zone on the wedge, are introduced to explore the possibility of hot-spot initiation, providing a potential method for initiation control. Results show that these methods can effectively promote the accelerated initiation of the oblique detonation. Furthermore, the hot-spot temperature, size and position are varied to analyze their effects on the initiation position. Increasing the temperature and size of the hot-spot both can accelerate initiation, but from the perspective of energy consumption, a small hot-spot at a high temperature is preferable for accelerating ODW initiation than a large hot-spot at a low temperature. The initiated position of the oblique detonation is sensitive to the position of the hot-spots; if a 2000 K hotspot is at the beginning of the wedge, then the ODW's initiation distance will be reduced to about 30% of that without hotspot acceleration. [ABSTRACT FROM AUTHOR]

The development of various nanomaterials production technologies has led to the possibility of producing nanoparticles (NPs) and nanostructures, which can find a wide range of applications, from the fabrication of microelectronic devices to the improvement of material properties and the treatment of cancer. The unique characteristics of nanoparticles are primarily due to their small size, which makes size control important in their preparation. Modification of nanoparticles by laser irradiation and obtaining desired nanoparticle properties is a promising approach because of its ease of implementation. The purpose of this review is to analyze the works devoted to the study of laser-induced heating and melting of nanoparticles, to collect information and evaluate the results of using this method for functionalization and modification of metallic nanoparticles, and to discuss promising directions for the use of this technique.

Ultrashort pulse laser processed sulfur hyperdoped black silicon represents a promising silicon-based material for infrared optoelectronic applications due to its high sub-bandgap optical absorptance. Non-thermal melting and resolidification processes associated with such laser processing, however, result in amorphous and polycrystalline phases which may be detrimental for this purpose. Furthermore, the sulfur impurities are electrically inactive, impeding the formation of a rectifying junction. This work demonstrates an ultrafast laser heating process based on heat accumulation with laser pulses of 10 ps pulse duration at high repetition rates of 41 MHz and peak fluences between 33% and 66% of the ablation threshold as a method to (i) recrystallize the material and (ii) electrically activate the sulfur dopants while (iii) maintaining the sub-bandgap absorption. Furthermore, laser heating recovers the optical activity of sulfur states that have been previously deactivated by thermal annealing. The demonstrated process can have versatile applications in material functionalization due to its highly localized heat input accompanied by high cooling rates. [ABSTRACT FROM AUTHOR]

With the advent of toroidal and double-stage diamond anvil cells (DACs), pressures between 4 and 10 Mbar can be achieved under static compression, however, the ability to explore diverse sample assemblies is limited on these micron-scale anvils. Adapting the toroidal DAC to support larger sample volumes offers expanded capabilities in physics, chemistry, and planetary science: including, characterizing materials in soft pressure media to multi-megabar pressures, synthesizing novel phases, and probing planetary assemblages at the interior pressures and temperatures of super-Earths and sub-Neptunes. Here we have continued the exploration of larger toroidal DAC profiles by iteratively testing various torus and shoulder depths with central culet diameters in the 30–50 µm range. We present a 30 µm culet profile that reached a maximum pressure of 414(1) GPa based on a Pt scale. The 300 K equations of state fit to our P–V data collected on gold and rhenium are compatible with extrapolated hydrostatic equations of state within 1% up to 4 Mbar. This work validates the performance of these large-culet toroidal anvils to > 4 Mbar and provides a promising foundation to develop toroidal DACs for diverse sample loading and laser heating. [ABSTRACT FROM AUTHOR]

AbstractSimulations on the interaction between laser pulses with materials during pulsed laser ablation require information on the characteristics of both laser and material. While details on material properties are extensively studied, the temporal profile of the laser source term is rarely studied and is generally assumed to be Gaussian. This article explores the effects of non-Gaussian temporal laser source terms (TLSTs) in simulating the heat diffusion within a metal upon irradiation of femtosecond pulsed lasers. We employed the Two-Temperature Model (TTM) to simulate the temperature evolution on the surface of copper upon irradiation of a 100-fs laser pulse with different TLSTs at different laser repetition modes (single-shot, burst, and biburst). We used a constant total fluence of 3J/cm 2 in all cases and subsequently calculated the ablation depths based on the resulting temperature values. Our results show that non-Gaussian TLSTs generate lower electron and lattice temperatures, resulting in shallower crater depths compared to a Gaussian TLST. However, under burst and biburst modes, particularly with higher subpulse number repetition time, the results of non-Gaussian TLSTs approximate those of Gaussian TLSTs. To initiate laser ablation in such cases, higher laser fluence might be required. Our work on non-Gaussian temporal profiles in TTM simulations can be applied to other computational methods in describing laser-matter interaction. [ABSTRACT FROM AUTHOR]

Specific features of thermal transformations of ferrocene Fe(C5H5)2 at a pressure of 10 GPa upon laser heating to 2200 K have been investigated in diamond anvil cells. Maps of the temperature distribution on the sample during the heating have been obtained. The structure and properties of the transformation products have been studied by X-ray diffraction analysis, transmission electron microscopy, and Mössbauer spectroscopy. It is established that a characteristic feature of ferrocene transformations upon laser heating is the simultaneous formation of nanoparticles of iron (α-Fe) and iron carbide (Fe7C3) crystalline phases. The presence of α-Fe in the products of thermal transformations of ferrocene at high pressures has been observed for the first time. Possible mechanisms of the simultaneous formation of these nanoparticles during ferrocene transformations are discussed. [ABSTRACT FROM AUTHOR]

In this work, a novel approach involving coating fine PEEK powder on prepreg is introduced to improve wedge peel strength and reduce interlaminar voids. CF/PEEK laminates with resin interleaving are in situ consolidated by laser-assisted fiber placement. The morphology of the powdered surface is obtained using an optical profilometer, and the surface roughness and volume of added resin are calculated accordingly. Interface and surface temperature are measured during the layup process. Thermal history indicates that very short bonding time is the dominating factor for voids and limited interlayer strength. Laminate porosity and microscopic features are characterized with an optical microscope. The porosity of resin-interleaved laminates decreases to 3.7%, while the resin content only increases by 4.5% in the meantime. This is because interlayer resin particles rapidly melt under laser heating and quickly fill the voids between layers. The wedge peel strength of resin-interleaved laminates can increase by 30.1% without a repass treatment. This could be attributed to the increase in resin intimate contact and reduction in interlayer voids. [ABSTRACT FROM AUTHOR]

In this study, we report the synthesis of a new cubic neodymium-rhenium metallic alloy NdRe2 through the utilization of high pressure and laser heating in a diamond anvil cell. NdRe2 crystallizes in the … space group with a lattice parameter equal to 7.486 (2) Å and Z = 8 at 24 (1) GPa and 2,200 (100) K. It was studied using high-pressure single-crystal X-ray diffraction. The compound crystallizes in the cubic MgCu2 structure type. Its successful synthesis further proves that high-pressure high-temperature conditions can be used to obtain alloys holding a Laves phase structure. Ab initio calculations were done to predict the mechanical properties of the material. We also discuss the usage of extreme conditions to synthesize and study materials present in the nuclear waste. [ABSTRACT FROM AUTHOR]

In this study, we report the synthesis of a new cubic neodymium-rhenium metallic alloy NdRe2 through the utilization of high pressure and laser heating in a diamond anvil cell. NdRe2 crystallizes in the … space group with a lattice parameter equal to 7.486 (2) Å and Z = 8 at 24 (1) GPa and 2,200 (100) K. It was studied using high-pressure single-crystal X-ray diffraction. The compound crystallizes in the cubic MgCu2 structure type. Its successful synthesis further proves that high-pressure high-temperature conditions can be used to obtain alloys holding a Laves phase structure. Ab initio calculations were done to predict the mechanical properties of the material. We also discuss the usage of extreme conditions to synthesize and study materials present in the nuclear waste. [ABSTRACT FROM AUTHOR]

The macrosegregation evolution kinetics of undercooled Cu60Fe40 immiscible alloy during slow cooling and rapid cooling processes were investigated by laser heating and glass fluxing techniques. The critical undercooling for the occurrence of metastable phase separation (MPS) was determined as 41 K. As the undercooling rised, MPS always occurred even if the undercooling rised to the largest value of 482 K (0.28 TL) and the nucleation temperature of primary phase was below the peritectic temperature for the first time. Meanwhile, both the phase separation time and the volume fraction of Fe-rich zone gradually increased under the two conditions. However, the phase separation time and the volume fraction of Fe-rich zone under the laser heating condition were much smaller than that under the glass fluxing state. At slight undercoolings, MPS preferentially happened at the bottom region of laser-heated sample and glass-fluxed sample, and the microstructure in other regions appeared as well-defined αFe dendrites in the (Cu) matrix phase. In highly undercooled state, macrosegregation morphologies composed of floating Fe-rich zones and sinking Cu-rich zones were preserved. The critical undercooling for the macrosegregation formation of glass-fluxed sample was relatively larger. Moreover, the Fe-rich zone completely floated to the top of glass-fluxed sample while that located in the middle region of laser-heated sample. The higher the bulk undercooling, the lower the lattice constant of (Cu) phase and the greater the lattice constant of αFe phase. The calculations and analyses of temperature field and fluid dynamics demonstrated that the difference of heat transfer mechanisms between laser-heated sample and glass-fluxed sample was responsible for the distinctions of macrosegregation evolution kinetics in the two experiments. [ABSTRACT FROM AUTHOR]

Stimuli-responsive polymers are an important class of materials with many applications in nanotechnology and drug delivery. The most prominent one is poly-N-isopropylacrylamide (PNIPAm). The characterization of the kinetics of its change after a temperature jump is still a lively research topic, especially at nanometer-length scales where it is not possible to rely on conventional microscopic techniques. Here, we measured in real time the collapse of a PNIPAm shell on silica nanoparticles with megahertz x-ray photon correlation spectroscopy at the European XFEL. We characterize the changes of the particles diffusion constant as a function of time and consequently local temperature on sub-microsecond timescales. We developed a phenomenological model to describe the observed data and extract the characteristic times associated to the swelling and collapse processes. Different from previous studies tracking the turbidity of PNIPAm dispersions and using laser heating, we find collapse times below microsecond timescales and two to three orders of magnitude slower swelling times. [ABSTRACT FROM AUTHOR]

Recently, there has been a high demand for elucidating kinetics and visualizing reaction processes under extreme dynamic conditions, such as chemical reactions under meteorite impact conditions, structural changes under non-equilibrium conditions, and in situ observations of dynamic changes. To accelerate material science studies and Earth science fields under dynamic conditions, a submillisecond in situ X-ray diffraction measurement system has been developed using a diamond anvil cell to observe reaction processes under rapidly changing pressure and temperature conditions replicating extreme dynamic conditions. The development and measurements were performed at the high-pressure beamline BL10XU/SPring-8 by synchronizing a high-speed hybrid pixel array detector, laser heating and temperature measurement system, and gas-pressure control system that enables remote and rapid pressure changes using the diamond anvil cell. The synchronized system enabled momentary heating and rapid cooling experiments up to 5000 K via laser heating as well as the visualization of structural changes in high-pressure samples under extreme dynamic conditions during high-speed pressure changes. [ABSTRACT FROM AUTHOR]

In order to determine the influence of process parameters such as the optimal heating method, heating temperature, and time on the corrosion resistance of zinc iron alloy coatings, and to maximize their corrosion resistance while ensuring coating quality, a study was conducted on the influence of heating process on the corrosion resistance of zinc iron alloy coatings. Prepare coatings on steel-based materials using hot dip method, adjust the auxiliary plating and immersion temperatures, and test the corrosion resistance of coatings at different temperatures. After completing the coating preparation, test the corrosion resistance of the coating under two heating processes, namely, heating furnace and laser, as well as the corrosion morphology and corrosion rate of the coating under different heating temperatures. Calculate the corrosion loss of the coating under different heating durations. The experimental results show that the corrosion resistance of the coating is better when the auxiliary plating and immersion temperatures are 70 and 450°C, respectively. When the laser heating process is selected and the heating temperature does not exceed 450°C, the corrosion resistance of the coating is higher. Once the temperature is exceeded, the corrosion resistance of the coating decreases, and with the increase of heating time, the corrosion resistance of the coating will decrease. When the heating time is 14 min, the mass loss of the coating reaches 0.011 g. And in the electrochemical corrosion test, after soaking for 18 days, the polarization resistance value of the zinc iron alloy coating decreased to 987.8 Ω·cm2, achieving complete failure.

Currently, there is limited research on the in situ forming process of thermoplastic prepreg tape winding, and the unclear impact of process parameters on mechanical properties during manufacturing is becoming increasingly prominent. The study aimed to investigate the influence of process parameters on the mechanical properties of thermoplastic composite materials (CFRP) using laser-assisted CF/PPS winding forming technology. The melting point and decomposition temperature of CF/PPS materials were determined using DSC and TGA instruments, and based on the operating parameters of the laser-assisted winding equipment, the process parameter range for this fabrication technology was designed. A numerical model for the temperature of laser-heated CF/PPS prepreg was established, and based on the filament winding process setup, the heating temperature and tensile strength were simulated and tested. The effects of process parameters on the heating temperature of the prepreg and the tensile strength of NOL rings were then analyzed. The non-dominated sorting genetic algorithm (NSGA-II) was employed to globally optimize the process parameters, aiming to maximize winding rate and tensile strength. The results indicated that core mold temperature, winding rate, laser power, and their interactions significantly affected mechanical properties. The optimal settings were 90 °C, 418.6 mm/s, and 525 W, achieving a maximum tensile strength of 2571.51 MPa. This study provides valuable insights into enhancing the forming efficiency of CF/PPS-reinforced high-performance engineering thermoplastic composites.

Time-domain thermoreflectance (TDTR) is a well-established pump–probe method for measuring thermal conductivity and interface conductance of multilayers. Interpreting signals in a TDTR experiment requires a thermal model. In standard front/front TDTR experiments, both pump and probe beams typically irradiate the surface of a multilayer. As a result, existing thermal models for interpreting thermoreflectance experiments assume that the pump and probe beams both interact with the surface layer. Here, we present a frequency-domain solution to the heat-diffusion equation of a multilayer in response to nonhomogeneous laser heating. This model allows analysis of experiments where the pump and probe beams irradiate opposite sides of a multilayer. We call such a geometry a front/back experiment to differentiate such experiments from standard TDTR experiments. As an example, we consider a 60nm amorphous Si film. We consider how signals differ in a front/front vs front/back geometry and compare thermal model predictions to experimental data. [ABSTRACT FROM AUTHOR]

The optical properties of a photoluminescent material based on CsPbBr3 perovskite nanocrystals were studied in this work. The laser heating of the obtained samples was studied under three different regimes of laser excitation: the photoluminescence band appears in the Stokes region, in the anti-Stokes region, and coincides with the excitation line. It was found that under laser excitation of a certain wavelength, this material is able to demonstrate predominantly anti-Stokes (upconversion) photoluminescence. A method is proposed for estimating the PL quantum yield from data on absorption, photoheating, and the position of the photoluminescence band of a sample at two different wavelengths. The external photoluminescence quantum yield of CsPbBr3 nanocrystals was experimentally determined to be 91 ± 4%. The results of this work can be useful for the development of optical cooling technology and can be used in the development of laser devices based on perovskite materials. [ABSTRACT FROM AUTHOR]

In this article, we address the application of phase field crystal (PFC) theory, a hybrid atomistic-continuum approach, for modeling nanostructure kinetics encountered in laser deposition. We first provide an overview of the PFC methodology, highlighting recent advances to incorporate phononic and heat transport mechanisms. To simulate laser heating, energy is deposited onto a number of polycrystalline, two-dimensional samples through the application of initial stochastic fluctuations. We first demonstrate the ability of the model to simulate plasticity and recrystallization events that follow laser heating in the isothermal limit. Importantly, we also show that sufficient kinetic energy can cause voiding, which serves to suppress shock propagation. We subsequently employ a newly developed thermo-density PFC theory, coined thermal field crystal (TFC), to investigate laser heating of polycrystalline samples under non-isothermal conditions. We observe that the latent heat of transition associated with ordering can lead to long lasting metastable structures and defects, with a healing rate linked to the thermal diffusion. Finally, we illustrate that the lattice temperature simulated by the TFC model is in qualitative agreement with predictions of conventional electron–phonon two-temperature models. We expect that our new TFC formalism can be useful for predicting transient structures that result from rapid laser heating and re-solidification processes. [ABSTRACT FROM AUTHOR]

The effects of heat treatment with continuous laser radiation on samples of the Fe–18Cr–10Ni alloy of the austenitic-martensitic class that have undergone preliminary megaplastic torsional deformation in the Bridgman chamber are investigated. It is established that the combined application of deformation (deformation in the Bridgman chamber) and thermal (laser heating) effects to the alloy forms the structure of metastable austenite (γ phase), which differs from stable austenite in higher strength characteristics. The nature of this phenomenon is discussed. [ABSTRACT FROM AUTHOR]

The effects of subsonic plasma flows of carbon dioxide and pure nitrogen combined with additional laser irradiation on silicon carbide material were investigated. Silicon carbide samples were exposed to temperatures from 1480 to 1620°C (in the carbon dioxide plasma flow) and from 1600 to 1960°C (in the pure nitrogen plasma flow) at a constant pressure in the test chamber of 1 × 104 Pa and gas mass flow rate of 2.4 g/s. Significant differences in the heat transfer and behavior of the samples were observed depending on the plasma composition. The microstructure and surface profiles of the samples before and after different exposures were compared. Surface peculiarities were detected in the areas where the maximum laser irradiation intensity was applied. [ABSTRACT FROM AUTHOR]