Search

We report the experimental observation of the polarization modulation instability (PMI) effect in all-normal dispersion (ANDi) microstructured optical fibers (MOFs) with quasi-continuous pumping. The small unintentional birefringence (~10-5), that any realistic non-polarization maintaining MOF exhibits, contributes to this nonlinear effect. PMI can produce two sidebands whose polarization state is orthogonal to the polarization of the pump. In this work, only one type of PMI process is observed, i.e., when the pump is polarized along the slow axis of the fiber and sidebands are generated in the fast axis mode. This PMI process was studied experimentally in two ANDi fibers with different dispersion features and pumped with long (700 ps) pump pulses at 1064 nm. Experimental results are compared with theoretical calculations, with reasonably good agreement.

The generation of photon-pairs with controllable spectral correlations is crucial in quantum photonics. Here we present the design of a photonic crystal fiber to generate widely-spaced four-wave mixing bands with spectral correlations that can be tuned through the thermo-optic effect after being infiltrated with heavy water. We present a theoretical study of the purity of the signal (idler) photon generated as a function of temperature, pump spectral linewidth and the length of the fiber. 511-6/18-8876 CIIC155/2019 APN-624 TEC2016- 76664-C2-1-R PROMETEO/2019/048

The advent of microstructured optical fiber (MOF) technology gave a significant boost to research in nonlinear optics. MOFs have the advantage of high nonlinearity and designable dispersion, which makes this type of fiber an excellent platform for efficient generation of nonlinear effects. In the last years, MOFs exhibiting normal dispersion at any guiding wavelength (ANDi fibers) aroused the interest because of the possibility of using them for the generation of coherent and recompressible supercontinuum (SC) light. In this contribution, we present our recent results regarding the generation of the polarization modulation instability (PMI) effect in ANDi MOFs in the quasi-CW pump regime at 1064 nm. The experimental observation of this nonlinear effect is reported, along with the theoretical analysis of it.

Polarization modulation instability (PMI) is a form of modulation instability that can exist in weakly birefringent optical fibers [1]. Sidebands can be generated by this effect when a polarization mode of the birefringent fiber is excited with an intense optical pump. The polarization state of the sidebands is orthogonal to the polarization of the pump signal. PMI has been observed in microstructured optical fibers (MOFs). PMI was reported in a large-air-filling fraction MOF that was pumped in the normal dispersion regime with visible light [2]. The coherent degradation of femtosecond supercontinuum light generated in all-normal dispersion (ANDi) MOFs due to PMI was recently investigated [3]. Here, we report the experimental observation of PMI effect in ANDi MOFs with picosecond pumping at 1064 nm.

We present a detailed experimental study of fourwave mixing tuning in photonic crystal fibers that were filled either with ethanol or with heavy water. It is demonstrated that wide tuning ranges can be achieved in both cases through the variable chromatic dispersion generated by thermo-optic effect. Tunability of the signal band from 745 nm to 919 nm, and of the idler band from 1260 nm to 1759 nm is demonstrated with a pump at 1064 nm. Numerical calculations were carried out and show good agreement with experimental measurements. We present a detailed experimental study of fourwave mixing tuning in photonic crystal fibers that were filled either with ethanol or with heavy water. It is demonstrated that wide tuning ranges can be achieved in both cases through the variable chromatic dispersion generated by thermo-optic effect. Tunability of the signal band from 745 nm to 919 nm, and of the idler band from 1260 nm to 1759 nm is demonstrated with a pump at 1064 nm. Numerical calculations were carried out and show good agreement with experimental measurements.

We report on the use of Z-scan technique with a beam composed with two modes, to probe the nonlinear optical properties of phosphate glasses doped with Er$^{3+}$-Yr$^{3+}$ and silver nanoparticles. Understanding the linear and nonlinear properties of these materials is crucial to evaluate if they are candidates to be used as gain media in lasers or optical amplifiers. Experiments are carried out by implementing the open-aperture Z-scan technique with bimodal laser pumping ($LG_{00}$ and $LG_{20}$) at 908.6 nm. The analysis is performed using a simplifiedmodel that incorporates nonlinear absorption and saturation intensity of the samples. The advantage of using a beam with a bimodal structure is that it allows us to evaluate the energy transfer between the modes, which is relevant since the optical active media act as an intermediary. This process is incorporated through an effective phenomenological parameter in the model that we use in our analysis., 9 pages, 8 figures

We present an experimental study of parametric four-wave mixing generation in photonic crystal fibers that have been infiltrated with ethanol. A silica photonic crystal fiber was designed to have the proper dispersion properties after ethanol infiltration for the generation of widely spaced four-wave mixing (FWM) bands under 1064 nm pumping. We demonstrate that the FWM bands can be tuned in a wide wavelength range through the thermo-optic effect. Band shifts of 175 and over 500 nm for the signal and idler bands, respectively, are reported. The reported results can be of interest in many applications, such as CARS microscopy.

We present an experimental and numerical study of four-wave mixing in photonic crystal fibers. Our objective is the development of tuning techniques based on tailoring de dispersion of the fibers. We demonstrate wide tuning ranges.

An experimental study of the wavelength shift of four-wave mixing (FWM) bands as a function of pump power in single-mode photonic crystal fibers pumped at normal dispersion is presented. Three fibers whose zero dispersion wavelength is close to the pump wavelength were investigated. The wavelength shift of the signal and idler bands increases as the pump wavelength offset from the zero dispersion wavelength becomes smaller. A largest shift of 29 and 47 nm for the signal and idler wavelengths, respectively, is reported. Experimental results are compared with theoretical calculations based on a fully vectorial method showing good agreement.

An experimental study of the effects of an auxiliary 976 nm pump signal on the four-wave mixing parametric bands generated with a 1064 nm pump in a normal dispersion Er-doped photonic crystal fiber is presented. The four-wave mixing signal and idler bands shift to shorter and longer wavelengths, respectively, with increasing 976 nm pump power. It is shown that the wavelength-dependent resonant refractive index change in the erbium-doped core under 976 nm pumping is at the origin of the effect.

The interplay between chromatic dispersion and nonlinear effects is crucial for an efficient exploitation of non linear propagation in photonic crystal fibers (PCF). Once a PCF preform has been prepared, changing the parameters that control the fabrication process it is possible to adjust the dispersion properties of the fiber. In addition, it is particularly useful to develop postprocessing techniques that enable a fine adjustment of the dispersion along a section of PCF. The tapering of PCF, using a fusion and pulling technique, has been established as a rather useful technique to engineer the dispersion properties along tens of centimeters. Some of our recent experiments demonstrate that the use of erbium doped PCF enables an optical control of the dispersion through optical pumping of the rare earth ions. Since our interest is focused on the development of fiber light sources, we will present several experiments on supercontinuum and photon pairs generation, through degenerate four-wave mixing (FWM), in order to illustrate the control that one can achieve on the optical spectra of these light sources by tailoring the dispersion of the fibers.

The interplay between chromatic dispersion and nonlinear effects is patent. Once a photonic crystal fiber (PCF) preform has been prepared, changing the parameters that control the fabrication process it is possible to adjust the dispersion properties of the fiber. In addition, it is very useful to develop postprocessing techniques that enable a fine adjustment of the dispersion along a section of PCF. The tapering of PCF, using a fusion and pulling technique, has been established as a rather useful technique to engineer the dispersion properties along tens of centimeters. Some of our recent experiments demonstrate that the use of erbium doped PCF enables an optical control of the dispersion through optical pumping of the rare earth ions. Our interest is focused on the exploitation of nonlinear PCF for the development of fiber light sources. Thus, we will present several experiments on supercontinuum and photon pairs generation, through degenerated four-wave mixing (FWM), in order to illustrate the control that one can achieve on the optical spectra of these light sources as a function of different dispersion control approaches.

We present an experimental study of the shift with temperature of widely-spaced FWM parametric bands generated in an ethanol-inflltrated photonic crystal fiber. We report broadband tuning of 175 nm and over 500 nm for the signal and idler bands, respectively, achieved through the thermo-optic effect. Numerical calculations were carried out and show good agreement with experimental data.